Sir , hamare depot wale manhole me seal nahin lagate Hain jisse ki gadi wale dip pipe ke hole band kar dete Hain depo wale manual mein seal kyon nahin lagate Hain kripya bataye, unse bola manhole me seal lagane ki to kh rahe hain hamare yaha nahi lagti , Its legal or not , koi legal document hai jisse ye confirm kiya ja sake ki seal manhole me lagana compalsary hai, pls guide

Knowledgeable , ... Thank u sir

@kamalbrar8773

10 ай бұрын

Ok samaj gya nehru

Super training

Verry good vedio Sir

Sir where is the device used for calibration?

Sir, during calibration 1000 litre water in including its pipeline till manifold or only till master valve ?

@PraveenVarmaFromIndia

9 ай бұрын

It is including pipeline upto manifold

1CM = ? HOW Much Litters?

Sir in this procure we cannot comapre water to petrol and diesel. Petrol diesel expands with temperature!

tank lorry calibrated by water... are u sure its equal to petroleum product volume if temp variation affect on petroleum product kindly give ansawer

@PraveenVarmaFromIndia

4 жыл бұрын

There are many reason for using water as medium to calibrate the truck. 1. It is really cheap or free of cost or available easily. 2. It is safe to handle. 3. The coefficient of thermal expansion of water varies with temperature but it is quite low in comparison to other petroleum product. Giving below the coefficient of thermal expansion for water at various temperatures water at 0oC: -0.000050 (1/oC) water at 4oC: 0 (1/oC) water at 10oC: 0.000088 (1/oC) water at 20oC: 0.000207 (1/oC) water at 30oC: 0.000303 (1/oC) water at 40oC: 0.000385 (1/oC) water at 50oC: 0.000457 (1/oC) water at 60oC: 0.000522 (1/oC) water at 70oC: 0.000582 (1/oC) water at 80oC: 0.000640 (1/oC) water at 90oC: 0.000695 (1/oC) Generally we calibrate the truck at a range of 20 to 40 Deg C and at this temperature range the coefficient of thermal expansion for water is almost 1/3 rd of HSD / AGO / Diesel. Apart from the above, while dispatching the petroleum product at tank truck gantry the advance automation system has temperature compensation at the flow meter. Trust this will help.

@natumanyaantony3746

Жыл бұрын

There are temperature and density corrections that are used when determining the actual volume of petroleum at loading and unloading

Sir how can we apply for tank laury calliberation work in gujarat kutch district i want to start this business

@PraveenVarmaFromIndia

2 жыл бұрын

You will require a permission to open a calibration tower from Controller of Weights and Measure

Ishka licence kaha se Ishu hota he

@PraveenVarmaFromIndia

Жыл бұрын

Controller of weights and measure department.

Sir I want to apply iocl tanker what is its procedure want to do this business

@afnansayed380

Жыл бұрын

From Goa

@PraveenVarmaFromIndia

Жыл бұрын

They publish the tender and through that route you can place the truck with IOCL, HPCL and BPCL

sir how many income in this tanker business?

@PraveenVarmaFromIndia

3 жыл бұрын

The rate is between Rs 1.70 to 2.50 per kl per km. The payment is based on round trip kilo meter (RTKM). The RTKM varies on season / off season and on company. Expense you can calculate.

I will be grateful if someone provide a translation to English, please LOVE U Indians

@PraveenVarmaFromIndia

4 жыл бұрын

Hi....Sorry for the late response. With in One / Two day I will add up sub-title in English. Regards

@PraveenVarmaFromIndia

4 жыл бұрын

Hi...the sub-title in English are added to the video. By the way you belong to which country?

@muh9481

4 жыл бұрын

@@PraveenVarmaFromIndia many thanks to you. I am from Iraq

@PraveenVarmaFromIndia

4 жыл бұрын

okay,,,,

@kumarjha1780

4 жыл бұрын

@@PraveenVarmaFromIndia sir do you have tank to tank transfer video. I am also looking for SOP of fuel oil tank farm