Never knew my old Playstation cheat codes will come in handy in my late 30's

@Chris.Rhodes

Жыл бұрын

Nah, Left, Right, Right, Right, Left, Right is Mortal Kombat cheat codes for Super Nintendo 😬

@wjodf8067

Жыл бұрын

@@Chris.Rhodes Mario GO Kart

@Chris.Rhodes

Жыл бұрын

@@wjodf8067 oh jeez. lol

@davidhenderson3400

Жыл бұрын

And with a washing machine of all things.

@joshstrout9867

Жыл бұрын

Underrated comment lmao. Pretty much all the older gen game/pc systems hahaha. Best part is this code is a sweet cheat code I tried it on my whirlpool and it absolutely gets you into the settings menu I was sketched out lmao. Down 4 click start and boom it did a minute +- water cycle and shut off. I wasn’t having any issues with mine but had to try it lol.

Dude, your videos are probably one the best sources of actually helpful information on KZread. Thank you for all your free and helpful info. God bless.

@Lions7.62mm

Жыл бұрын

there are literally MILLIONS of helpful KZread videos. As much as I love this fella and his content, your statement is so far out of line.

@rosieclark3661

Жыл бұрын

@@Lions7.62mmthat’s why he said one of the best quit trying to a big deal out of everything

@sumwonkool

2 ай бұрын

⁠@@Lions7.62mm wow how did u take offense to that and say it was out of line?? Sheesh lady. Take a midol

Also unlocks a secret laundry detergent that the delicates created.

@busterbuster8193

Жыл бұрын

For the love of God eliminate the distracting annoying music.

You just fixed my washer, you fucking champ.

@jakecool100

Жыл бұрын

Had a washer for 5 years did this couldn’t figure it out trashed it for one 15 years old wish I could’ve seen this 😅

@michaelashman1182

Жыл бұрын

fixed mine too i have that exact model

I’m not sure but this made me start to cry. I feel so overwhelmed by everything! I’m 60, old, alone. Broke. My GE Top load Washer Stopped spinning. The space it’s in is so small. I have no family no friends so no one to help me move it, then watching this it went so far over my head. I feel so totally defeated. I can’t believe it took till how old I am now to learn it needs to be calibrated! I’ve never even heard of this! Sigh 😔

@coltonwilliamson2647

5 ай бұрын

What state are you in Jennifer?

Maybe if the manufacturers didn't make it harder than cracking a banks safe to get into the diagnostics, there would be less waste.

@TheSimba86

Жыл бұрын

they seriously don't need computers in them, my grandmother had a washing machine that just had a mechanical timer in it that she used for decades and never had to enter the Konomi code on it so it could be calibrated

@handyjayes1

Жыл бұрын

@@TheSimba86 yes agreed. Everything is made to fail pretty much, the month after the warranty ends by design. Corruption and waste and the quick buck rules the world.

@ericschulze5641

Жыл бұрын

What you probably don't know is the Clinton administration gave manufacturers a deadline to phase out mechanical timers on washers, because in thier minds it was eco friendly, basically so you can't fill with hot water, you can set it on hot, it will start to fill with hot but once the lid locks you'll hear the water sound change, that's the machine switching the hot off and on & the cold on. Thank you democrats

@rustybricks1924

Жыл бұрын

@@handyjayes1 yep it's called designed obsolescence. Everything made after (oddly enough) 2001 is made to be obsolete. TBH it should be illegal and criminal but it isn't 😮‍💨

@Aweoe

Жыл бұрын

You shouldn't really need diagnostics

I have a Kenmore that had begun to "dance" during the spin cycle, and was just living with it. Ran the calibrate and it's a whole new machine. Thanks Derrick!

@erockscott1184

3 ай бұрын

Mine does the sane thing..momentarily then stops "DANCING" and works ok its wierd.

Never had a problem before appliances had computers. The old machines even met EPA regulations.

That whole left, right, right, left thing seem like a joke... BUT I can't doubt Derrick. He's a pro.

@zeke112964

Жыл бұрын

It's real I have one of these

@WatchingYouTube247

Жыл бұрын

It’s real I did it lol was shocked 😮

@kaizenj6738

Жыл бұрын

It's real. Just did it!😊

@akeleven

Жыл бұрын

I've already done this.

@mikediles2216

Жыл бұрын

It's not

Mine wouldn't rinse and spin. I did this then held down the pause button for 9 seconds like I seen on another KZread and it goes thru all the cycles now!!! THANKS!

@sumwonkool

2 ай бұрын

Mine is not rinsing and spinning. I did this and it reset or recalibrated and went thru the same light cycle, just like in the video. but it’s still not rinsing and spinning. You said you did this same method with the left right and then afterwards you held down the pause for 9 seconds?? Just wanna make sure I did the process correctly. For instance at what point do I need to hold the pause for 9 seconds?

I got this whole set brand new for just $100 because the people didn't know the unplug it, plug it back in and lift the lid so many times within so many seconds trick. Now I know a new trick! Thank you! ❤️

Wish this had worked. The damn washer still keeps failing to do the final spin cycle when I select the "drain spin" option. Sometimes it doesn't spin for any cycle. Whirlpool support was amazing even though we bought it used, and they even gave us a temporary warranty, but it just recently expired. I love/hate modern HE washers!

@il.siritsa

4 ай бұрын

❤😂❤

@sumwonkool

2 ай бұрын

Mine too. It it’s a kenmore. Should I call Call customer service?

You are a good man. Honestly mean that. Thank you for sharing your knowledge.

@derrickwith2rs

Жыл бұрын

Thank you. I swear I appreciate that. I haven’t always been the best decision maker so I’m trying my best. Thank you. For real thank you

@allthewayinu

Жыл бұрын

Real talk!

Derrick, you are a genius! Thank you so much for your insight on the diagnostic procedure. I was almost ready to discard this Maytag! Now, it seems like it has a whole new lease on life of washing clothes! Thank you!

Thanks a lot! I live in the Bahamas, and this info saved me $300. I'd give you ten stars if I could. 🎉

I can’t thank you enough for this video. Bought a washer off Facebook marketplace last night and thought it was broken. You’re the best.

Ty I’ve gone thru 10 of these videos. Your the first person to say what happens thru the cycle and how long it takes

Thank you so much! Didn't even know this was a thing. It's the unit I have my place which I'm renting and without this video I just never would have left it. Not having any issues with it but figured there's no harm in doing it.

Thank you! I took your advice and it helped me out. I wrote down the calibration procedure and it's next to my washer for the next time for calibration.

It WORKED!! I could burst into happy tears!!! Thank you!!!! 🙏🏻 ❤

Thanks for making all these great vids! And great job at turning your life around. Addiction is hell. It's great when men like you learn from their past mistakes and do something positive that helps other people. Great job!

Man first my car tires now I got to balance my washer machine, what's next my life.

@lalobernal7762

10 ай бұрын

Fr

THANK YOU. I was damn close to ditching it to the curb.

Thank you so much. Completing the steps on the second try, less than 6 minutes, every light except the lid lock did blink, and upon dialing to reach only the rinse light and then patiently waiting for ”wash complete”, my Amana that we purchased 5 years is working again. For some reason, no light would appear until this calibration, and we had bought this brand new with an extended warranty. Thank goodness I need not burden extended-warranty service people now.

Nice! When Id pull that manual out from inside the cabinet the customer would act like I did a magic trick. Always taught them how to follow the directions and put it through diagnosis if they were interested in learning it! Love what you do, keep crushing big dog!

Thank you for this video!! It absolutely worked like a charm. I was in panic mode before I stumbled across your video. Soooo glad I did!!

Thanks for sharing your wisdom!!! It is much appreciated🙂

Wow you’re a legend. My washer it seemed like the drum was off track or something. It’s brand new and it literally was walking around the laundry room while it was spinning. Did this and it fixed it, thanks bro!

❤ dude, you rock...I thought my stuff was busted!! 😂 Tks a million 😊

Ayy fixed my washer! Thanks for sharing this info.

THANK you! Thought I had a service call in my future. Your video saved the day. Very much appreciated.

It completely works!!!!!!❤❤❤❤ Thankyou! I have a working washing machine again!!!!

At 0:33 by run a test cycle do you mean a regular cycle without clothes or do a load of laundry to test it out?

This is the perfect time to have learned this. I'm going to have to move my washer next week for some contractors to do some work.

Omfg bro I was literally about to throw my washer away thank you thank you thank you

Whew, we have a GE, with 5 light's. I'll keep watching, in case it comes up. Thanks, John

@kingsxkids

Жыл бұрын

That’s a completely different beast inside the timer Consol there may be a mini manual with the protocol for that machine but I don’t think they have a calibrate function

@Johnny53kgb-nsa

Жыл бұрын

@@kingsxkids ok, thank you

Great info thank you sir ! Been subscribed since you first started! Lots of great info

I just purchased an Amana washer, and have had problems since the first day it wouldnt go through any cycles would stay on sense fill for like 10 minutes then drain and nothing so i seen your video and done exactly what you said and now im waiting im doing a test run to see if it is going to work. My water pressure is not all that great but we have never had problems with my previous washer before.

Mine did the same. Stuck on sensing. Nothing else. It's was a clog on the drain pump. A sock was stuck in drain pump below washer.

I changed the support rods out, but it didn't fix it, but then I remembered watching this video. Now my washer is mostly balanced again. Good shit, bro!

Thank you for the instructions. The beat of the mysic was a bit distracting as you talked. Any advice to repair a washer's enamel and feet to make look new?

Dude you straight up fixed my washer

Appreciate the info. I like old plain no computer washers but still have one of two washers like this and this info is priceless and saves frustration.

If you have one of those washers. Immediately go out and find an old direct drive washer with a drum in good condition and throw that new garbage away. The new ones NEVER actually get your clothes clean, and are built so cheaply they will NEVER survive past the 10 year mark. Get a thirty year old one, clean and service it (about $70 in parts) and it will work perfectly for another 30 years.

@jaemielee_mc1053

7 ай бұрын

I just bought one and had to come on here to get it working I'm gonna fix my old one of 15 yrs Caz its still great. Just Caz it stopped high spinning but I know the problem easy fix

Thanks for this. I've looked at a bunch of videos with a different system but couldn't get them to work

Subscribed! Thanks for saving my money 🙌🏾‼️

My amana washer frequently stopped at wash light and I had to repeat the whole cycle again. I tried this and so far it has worked well. This is awesome!

@merqueen21

8 ай бұрын

I hate my washer. Just want to throw my stuff in turn the knob and let it was. These sensing prices of crap. Ugh I've got four kids living here! It just sat on the wash cycle and groaned. We almost spent $300 on a Amana repair man. Thank you. Still letting it run through a cycle but somfar all you said was spot on. The lid wasn't even locking prior to doing this. ( Not that I like that rediculous feature. ) Sometimes ya just want to throw Ina sock you couldnt find lol they are so annoying. I will never buy another one. I wash .y stuff atthe creek if I have to .

This is the Komani code for these specific washers, that's really cool to learn.

when are they going to bring back those mechanical washer/dryers? I have a 2002 whirlpool and it's so far, knock on wood, it's still works👍.

This is why I only buy washers and dryers with no sensors or computers. Resistors and switches are good enough, and that's all anyone should have.

@peanuthead5730

Жыл бұрын

Amen this will be the last washed i buy with these useless sensors

I have this exact machine! And I had no clue. I just moved to a new house. I LOVE YOUR VIDEOS! THANK YOU!!!

Thanks this worked for me...I appreciate the info

More calibration videos good sir! This is very welcomed information!

Thank you for your help. I did this on my washer! Thank you!

Appreciate you man Derrick with 2 R’s life is better for 3rd 👁️ saving cash 💵 ‼️❗️‼️❗️❗️❗️❗️

Keep up the good work! Got my sub for putting it out there your still out of prison!

Thank you sir. Worked like a charm

Dudes a boss he’s a human cheat code

Bless you , fixed my washer

Man you're a modern hero for many! (Even though myself don't own a washer or any appliance but I recognize a hero here and today!

that's intresting, even we don't have here such sorts of "toploader" (ours are different, and mostly just used if there's a small space - otherwise, frontloader are common here)... looks like a cheat-code for early consoles.

@derrickwith2rs

Жыл бұрын

That’s my favorite part about them

With the exception of disassembling my appliances, I deep cleaned my washer and dryer to the best of my ability with the tips you've shared. Bonus, I also used the shop vac to clean the dryer vent for the house.

Thank you thank you, I was about to call a mechanic or something you just saved me like 50 bucks!!! 👍🏻👍🏻

@user-nl5wj1hi4p

2 ай бұрын

I think u forgot the 2 in front of the 50...

Wow, I can't believe that worked, I was fixing to get a new washer. Just wow!

I wish you knew how much you have helped me out man. If you are ever in sc let me know I would love to Meet ya and say thanks in person. You’re awesome thanks for all the videos and advice.

Just stumbled upon your shorts and my washer’s been stuck blinking on “spin” for months. Have to unplug and replug the thing to reset it to start new cycles. If this works you’re my hero. I’ve got it running the cycle now, fingers crossed!

Thank you so much!

Thanks for sharing your experience with peoples

My first and last Amana washer. Never, ever had that problem with Maytag

You're alright 👍 Derrick, very viable information ! I'll bet these manufacturers don't care for you very much !👍🥰😍

Thank you so much for this video , all your videos are very helpful and easy to understand ❤

Mine did something like that. I unplugged hip checked 3x the 4th time doing that it's been running like a champ. Glad to learn there is a proper process.👍🏾

Secret agent kids playing with the dials will reset for you.

look it's a whole range of whirlpool appliances that used the same part

My family had a washer we moved from Mass to Okla back to mass back to Oklahoma then to mass then Oklahoma then maine back to Oklahoma and back to maine then Oklahoma then oregon never had to calculate plug it in turn it on. Still would run today

i have that amana washer... hasn't happened yet but ill be coming back to this one some day unless my house gets foreclosed on hahahaha

I unplugged the washer for 1 minute then, i did the sequence. Thank you so mucb for your help!

For the first washer we have a problem where it doesn’t do a full normal wash we have to do rinse/spin then drain/spin

Thanks man what the fuck 💀🙏🙏 that GTA cheat code left right thing actually worked

The more super duper knick knacks, the more that goes wrong! (I apply that to Cars too). I want my old uncomplicated top loader that I could run hot water into!

I have the one in the middle I did what you did but only the sensing light comes on,, Thanks Mike

Thank you so much! It worked!

Hello just new subscriber here have A great day 👍😁

@derrickwith2rs

Жыл бұрын

Stay awesome and thank you so much for the sub 🙏

Good to know even though my washer is so old it doesn’t have lights! Lol

@leegraves101

Жыл бұрын

Mine too! I bought it used about 15 years ago, and it still works great

Wow Remind me the days you can do cheat codes on your game systems left right up down around lol

Thank you!

this guy is bad ass...good job..thank you

What if it gets stuck on rinse & randomly will pour water onto clothes for hours if you don't catch it? It does this periodically regardless of the cycle you're running, water temp, or "light soil-heavy soil". It's a Maytag with the 6 lights, but has more selectors on it.

THANK YOU! THANK YOU! SAVED ME 100s of DOLLARS! IT WORKS YALL!

I got one sitting in my garage waiting for the correct fix. Thanks

Dude. You are the man!!!

I’ve done a re-set, and now I’ve done the recalibration twice but the lights don’t flash, they stay on solid. I give up. It’s still under warranty so I’ll let the repair tech deal with it.

Yooo thank you my guy cause i was ready to dispose of this washer lol

OmGosh God Send you are !!! 👏🏾 ❤❤❤ this totally worked ! My husband was ready to buy a new brand new washer 😑

This saved us from getting a new washer so glad I watched. #washersaver ❤

I've been inspired to download my washers manual and read it again.

My nan has the one you showed that won't stop draining and refilling for like 45mins, tbf they where 400$ like 10 years ago for the washer and dryer that ISNT having a stroke.

Might do this to the work washers because sometimes they shake violently when doing towels

Thank you. Any idea how to bypass my lid lock switch because its broken and now washer wont drain or spin or rinse.

Had no idea this was a thing. We've got to start reading these instructions.

@akeleven

Жыл бұрын

You have to wait till the machine is full and then reach in between the tub and the body to get the booklet. So, no! you're not going to find these instructions in your user manual.