Didn’t see any sealant for timing cover or oil pan. Probably motor just for display
@m101ist
Жыл бұрын
Perhaps they getting it ready as a display model for a museum when we all go electric in the near future.
@babahais1840 Жыл бұрын
This engine will be taken apart again that's why no needed torque wrench.
@bobperry4229 Жыл бұрын
Yeah where's the torque wrench ,the engine is gonna be the grand finale at a fire works show.
@robertrivasarroyo1174 Жыл бұрын
I like how no one bothered to torque the main bearing caps or the piston connecting rod caps, this engine is going to fail sooner than later!
@tedhicks5431
Жыл бұрын
Me too and timing
@regkarn1
Жыл бұрын
I was thinking the same thing
@Sith_dude
Жыл бұрын
They are self torquing bolts. 😆
@davidhamm5626
Жыл бұрын
You mean the six bolt main caps, are not enough !
@IshmaelSantos
Жыл бұрын
The video was edited. You can clearly see the cuts.😀
@dannmann17 Жыл бұрын
I’ve got a 10 SRX with the infamous P0017, that sob is going to the auction!
@jamiepaton5449 Жыл бұрын
Please tel you did use a torque wrench to build that engine and not just the buzz gun
@gilberto3795
Жыл бұрын
I would like to know too.
@wittekPL
Жыл бұрын
Dosent look like it judging by the video
@Ender_Wiggin03
Жыл бұрын
Didn't look like it was timed right either
@noke258
Жыл бұрын
Didn't check bearing clearances or end float either.
@marc31415 Жыл бұрын
i wounder if you Primed the oil passage ways before the initial start
@aureliozacchi6537 Жыл бұрын
Já se foi a época que fabricavam bons motores, Só de ver a montagem já me arrepia de pensar no dia que vai fundir, daí é jogar fora e comprar outro descartável.
@IshmaelSantos Жыл бұрын
Mmmm, clean and shiny.
@danasixty5402 Жыл бұрын
Hey , you get what you pay for . Cheap Assembly.
@user-tp8nh3ec5h Жыл бұрын
Динамометрический ключ вышел из чата
@melvinjacobs5198 Жыл бұрын
Nice engine which was in my truck
@m101ist
Жыл бұрын
Was but not now ?
@YovaniRodriguez19782 ай бұрын
Olvidaste ponerlo a tiempo
@brayli86 Жыл бұрын
Very nice and complex engine to stand in traffic jam along with the others R3 / R4 poor drivers 😁
@howdareyou8773 Жыл бұрын
No torque on the crank rod a bearing bolts ? Wtf
@tedhicks5431 Жыл бұрын
Must've been marked for timing
@deayogarner5597 Жыл бұрын
Mc jack ,do own a torkue wrench?
@collinbartley231 Жыл бұрын
He didn't torque the heads
@malfunctionjunctionautomot7299 Жыл бұрын
what is the name of your dunk tank to clean auto parts
@m101ist Жыл бұрын
In the near future, that engine will be displayed in a museum when we all transfer to electric cars.
@vtjmproductionsusa2390 Жыл бұрын
No torque wrench 🔧 ROFLMAO oh that engine will run prolly 3 min Hahaha 🤣🤣🤣🤣🤣😂😂😂😂😂 Great job of showing how to FK up an engine.
@seanb2604 Жыл бұрын
No torque that ought last a month or so
@heromail2903 Жыл бұрын
Work on machine like this is too complicated to be done by robots. It is still far all work by human could be replaced with robots
@Henry-bi8fv10 ай бұрын
Can you fix my engine
@ianwille5780 Жыл бұрын
That motor is such a piece of trash they didn’t even bother to torque anything on it. I’m sure those are torque to yield head bolts as well. Good luck little junk engine
Пікірлер: 39
Didn’t see any sealant for timing cover or oil pan. Probably motor just for display
@m101ist
Жыл бұрын
Perhaps they getting it ready as a display model for a museum when we all go electric in the near future.
This engine will be taken apart again that's why no needed torque wrench.
Yeah where's the torque wrench ,the engine is gonna be the grand finale at a fire works show.
I like how no one bothered to torque the main bearing caps or the piston connecting rod caps, this engine is going to fail sooner than later!
@tedhicks5431
Жыл бұрын
Me too and timing
@regkarn1
Жыл бұрын
I was thinking the same thing
@Sith_dude
Жыл бұрын
They are self torquing bolts. 😆
@davidhamm5626
Жыл бұрын
You mean the six bolt main caps, are not enough !
@IshmaelSantos
Жыл бұрын
The video was edited. You can clearly see the cuts.😀
I’ve got a 10 SRX with the infamous P0017, that sob is going to the auction!
Please tel you did use a torque wrench to build that engine and not just the buzz gun
@gilberto3795
Жыл бұрын
I would like to know too.
@wittekPL
Жыл бұрын
Dosent look like it judging by the video
@Ender_Wiggin03
Жыл бұрын
Didn't look like it was timed right either
@noke258
Жыл бұрын
Didn't check bearing clearances or end float either.
i wounder if you Primed the oil passage ways before the initial start
Já se foi a época que fabricavam bons motores, Só de ver a montagem já me arrepia de pensar no dia que vai fundir, daí é jogar fora e comprar outro descartável.
Mmmm, clean and shiny.
Hey , you get what you pay for . Cheap Assembly.
Динамометрический ключ вышел из чата
Nice engine which was in my truck
@m101ist
Жыл бұрын
Was but not now ?
Olvidaste ponerlo a tiempo
Very nice and complex engine to stand in traffic jam along with the others R3 / R4 poor drivers 😁
No torque on the crank rod a bearing bolts ? Wtf
Must've been marked for timing
Mc jack ,do own a torkue wrench?
He didn't torque the heads
what is the name of your dunk tank to clean auto parts
In the near future, that engine will be displayed in a museum when we all transfer to electric cars.
No torque wrench 🔧 ROFLMAO oh that engine will run prolly 3 min Hahaha 🤣🤣🤣🤣🤣😂😂😂😂😂 Great job of showing how to FK up an engine.
No torque that ought last a month or so
Work on machine like this is too complicated to be done by robots. It is still far all work by human could be replaced with robots
Can you fix my engine
That motor is such a piece of trash they didn’t even bother to torque anything on it. I’m sure those are torque to yield head bolts as well. Good luck little junk engine