Thanks, brother! I just ran threw it. No sweat whatsoever. You are a lifesaver! I'm glad I didn't go through the dealer. I went on eBay, bought me a brand new OEM fob for $90 rather than the dealer charging me $202 for the fob and then charging me an additional $130 to program it for me. I owe you a case of beer, man. Bless you and stay safe. 💯

@spazi11e29

Жыл бұрын

I cant get it. I left the key found in my house away from the car. When the 3rd 10 minutes was over it says ready for fob #1. I only have 1 fob to program. So I put the fob in and it says ready for #2. So then while the fob is still in the slot I hit the bottom half of the on button. It than says no fob detected but I hear the relays turn on. So I don't know whats going on?

@wickedc6255

11 ай бұрын

You have to pull it out of the slot then hit the stop button

if you still seeing this . THANK YOU 🎉. Ran threw one time and got it . Don’t know if it was the keys being away or everything open but you saved me a heck of a lot of time and money !

This guide completely fixed my FOB issue. Thank you so much.

Awesome job... Just programmed my 2010 Z06. I have to admit I was nervous about disabling my car, but it worked the first time. Thank you so much for your video, you did a great job.

@JoshBoggsexposedhomes

3 жыл бұрын

did you put your car on a charger while doing it? Or could you do it without a charger?

@bigfacts1914

9 ай бұрын

@@JoshBoggsexposedhomes does it need charger?

I watched the video twice, and I was able to get my fobs programmed on the first try. Thanks!

Took a picture of your instruction sheet, follow it and 1/2 hour later DONE!!! You saved me a couple of $$, THANKS

From one Randy to another, Thanks Randy, have a 07 Zo6. I’ll keep this for future fob needs. Good video!

Thank you for the instruction I just completed on a 2008 Vette and I'm slow but was done in an hour. 4 key fobs now. Thanks, G

Just did this today and your paranoid slow step by step video did the trick like magic. 1 shot and done. WOOT!!! THANKS MAN!!

This video worked like a charm!! Was able to get a new fob programmed and working just following your instructions. Many many thanks!!!

Wow!! Worked like a charm on my C6 on the 1st try!! Thank you SO MUCH!!

Fantastic information, we got it on the first attempt, no issues whatsoever. Many thanks!

This process actually works, the instructions are clear and simple, it just takes some time. Great job!

@JoshBoggsexposedhomes

3 жыл бұрын

did you put your car on a charger while doing it? Or could you do it without a charger?

Good deal man, loving that Vett she's looks excellent. That's for sharing.

man I love your channel. Very good content!

Thanks for the video Made it through the first time, after i inserted 2 fobs in the slot and pressed off the DIC reported NO FOB DETECTED So i tried the 2nd key and it worked like a charm both did

Thank you.. Lost my main key and needed my number 2 to be number 1.. Much appreciated

Thank you so much got it done in the first 30 minutes! Video really helped a lot!

Sunday afternoon I did this works perfect thanks for uploading ....just wait 30 minutes to fob autolearn message and after that ready to program

Great video, just solved my problem after 2 other attempts and all the lost time. The dealer manual definitely skips a few steps! Thank you

Nice video! Love the Vette! I have the exact car- same year and color!!

Thanx to you and your video, I programmed two fobs on the first try. Thank you

At the start of this video you laid out the fobs on the wash/dryer, I assumed that your fob crapped out because it was laundered. I did that to one of my Fobs for my Dodge RAM, couldn't find my keys anywhere and then I realized that they were in my other pants... the ones going thru a rinse cycle. But it still works, surprising.

@AutoAuctionRebuilds

6 жыл бұрын

LOL No I put all of them there because it was the furthest point in my garage away from the Vette.

Fantastic video - My C6 just decided not to find the fobs. Now I'll fix it!! Thank you

Gina M thank u so much for the video I'm dealing with that issue right now so I going to go try it in a bit the steps u have because I try 3 times and it starts then I have to restart it again with the whole process thank u for ur time and video

"What have we learned" randy..... uh I have no idea 😆

I'm about to embark on this journey after work. My uncles C6 isn't recognizing his fobs and car is stuck in his driveway. 🤞 this will save the day.

Thanks for this video i did it in one time (cycle) with the help of this video Cheers from the Netherlands

Thank you so much for this Vlog . Worked perfectly for me .

Thanks so much for the great video. I followed your instructions word for word and it worked on my 2007 Vette the first time!!!!

@craftman74

9 ай бұрын

Hello, the fob is same to hime ? I have a 2007 too and my fob is circle not square.

Randy, this is very helpful. I need to do this for my fobs. Thank you!!

@AutoAuctionRebuilds

6 жыл бұрын

You're welcome :)

Worked the first time...thanks for the helpful video man

If anyone is watching this wondering how you put your window down if you don't have a fob working you don't need to put your window down. Also just bring the keys with you doesn't matter how close as long as not in the slot

Yep, good video Randy... yep learn to program at home, taking to dealership will easily run you 3 to 400 without question for a 30 min job.. let that sink hahaha... that video was well worth putting up. And they will make you wait around for like 2hrs acting like it was labor intensive to do so it fools people into thinking there was a lot of work involved.. Honest dealerships are like a thing of the past now

Thanks for the info! Worked for me on the first try!

Thank you! Worked like a charm!!

Well your instructions were right on, I redid mine hoping it would fix my RCDRL fashing in time with my right turn signal. It did not but many thanks for the successful reprogram.

I'm happy for you. I'm trying tomorrow. I dont wanna spend 30 mins doing this

One question. If you only have one FOB that needs programming can you just do one and leave the other as is? Very good video. thanks!

knocked it out on the first try after watching your video!! Thanks for sharing!!

@JoshBoggsexposedhomes

3 жыл бұрын

did you put your car on a charger while doing it? Or could you do it without a charger?

@dksgarage6061

3 жыл бұрын

@@JoshBoggsexposedhomes I did it w/o the charger but had just got home from driving it all day so it was all Charged up good

Thanks for the video! Worked on the first try. Thanks!

Great informative episode But now I only need to get a C6 Corvette and then I need you to show me how to turn a left hand into a right hand drive -have a great weekend !!

@AutoAuctionRebuilds

6 жыл бұрын

LOL Well let's get to it!

I'm having problems with my RCDLR clicking with the right turn signal and hazard light switch. So I'm going to use your instructions and completely re program my FOBs to see if that fixes the problem . I have a spare RCDLR that I bought on Ebay for $39 but I really don't want to have to tear the dash apart to take it out and replace the RCDLR. Wish me luck. Thx again for your very clear programing instructions.

It worked like a charm thank you so much 😊

This was very helpful. Thanks for sharing

Good job I think the programmed FOBs need to stay near the car while you do the programming Learned something from you man Thanks 👍👍👍👍🌹🌹🌹

Randy , Thanks for putting out the effort on this video. I find it to be very helpful. I'm reluctant to try it until I am sure it will work on a 2008. Do you know for sure ? Thanks again

Thx so much..I got it first try! Thx a lot! Great video

Well that looked like fun! I imagine that you will be doing that in your sleep for a few nights!!

@AutoAuctionRebuilds

6 жыл бұрын

For sure! I'm an "expert" now lol.

Thank you so much. This really worked.

this worked for me first time thanks, the only thing that scared me is it said no fobs detected at the end but both off my fobs worked

Nice video 👍🏻

Well done and very informative...

Randy I noted that on the 3rd and final key you reached over to the start button and pushed the button (lower part) without taking the 3rd key out of the slot. Do you think that was it? That may have let the car know that there were no more keys?

I have a 2006 Cadillac XLR-V this video saved my butt. I had to Replace my ECU in my car and the Cadillac dealer won't even touch my car.

Thank you,,, I have the 2 original is the process is the same, should I worry about anything else?

Hey Randy, really hope you see this because I know this video is just about one year old 😬. But I accidentally washed and dried my key fob for a 13 grand sport, and at first if I would take it apart and put it back together I could get back into my car and crank it through the slot inside the glovebox but my dash would still say no fob detected? Now I can’t unlock the car at all anymore😫. Will reprogramming the fob solve this issue since it was working in the beginning? Thanks in advance!

This was perfect! The dealer was gonna charge me $120 for this!

@JoshBoggsexposedhomes

3 жыл бұрын

did you put your car on a charger while doing it? Or could you do it without a charger?

I only have a single fob, it shows as #2 on the cluster. Will this procedure work for me? I bought a new fob I’d like to add.

Nice video. If you follow this step by step it works no problem. Thanks alot!

Hi there! Does this apply to those of us that have convertibles? Thanks for the video!

I used to program Ford's at the dealership. 30 mins always put the car on the charger. It's made that way for anti theft stuff. So nobody can steal it easily

@AutoAuctionRebuilds

6 жыл бұрын

That makes sense.

@StealthyWolfDaddyWerewolf

6 жыл бұрын

AAR, It was cool to learn that GM let's you program transponder keys without having to go to the dealer. For Ford, you have to have 2 programmed keys to program a 3rd. Eitherwise they use the super expensive rotunda tool to do diagnostics and programming. My 05 town car, I use the obd link mx2 and Forsys or Ford sys to do all the diagnostic stuff on my phone. I have a locked sct xcal3 tuner for engine stuff. But I just haven't spent the 100.00 to send it in and unlock it after I bought it. But if you really get into Ford stuff like the mustang you had. The sct xcal tuners are the way to go. From what I heard they can send a tune to bypass the pats security system. Along with being able to change your differential gears to calibrate the speedometer, turn off oxygen sensors .etc. I bought mine for my 99 town car that I put a built 01 mustang GT engine in. But I blew it because my 4r70w transmission had bad solenoids that resulted in a full throttle trans slip / money shot going uphill. Anyways, that's a really cool Corvette. I used to have a c4 and c5 years ago. I rember when we bought our c5. The dealer was talking about the c6 coming out with the automatic top, navigation, and heated seats. Just too bad they didn't keep the pop up headlights. That was my favorite part about the c5s. My question is does the c6 do 170 top speed like the c5 or 180? Lol. My c4 did 155 maybe 160 and they were both automatics.

So frustrating. None of my fobs were working. Ive done it 3 times start to finish. the fobs never work. Both have newer batteries. I had 1 near the car when I started the last 2 times...removing it from the area to start. 3rd time, left the 2nd fob in the slot and hit the stop button as a change. nothing. 4th time...removed all fobs from area before starting. going to get new batteries as a change up too. also removed the key after turning it to get into prog mode. I learned for attempt 3 that another set of instructions says you MUST hit unlock of each fob to finalize the programming and confirm operation.....but it doesn't say when>> after you hit stop on the acc button or before? with the last fob in the slot or none? I refuse to tow this to the dealer. #4 SUCCESS after calling my salesman at chevy and having him talk to a tech....he said to hold the stop button down for 15 secs to be sure it is getting completely out of learning mode....I was merely tapping it before and it was clicking, IDK....either it was that or I also got new batteries in both remotes. I know I replaced both this year...but regardless, IT WORKS.

@tjmoneybags

2 жыл бұрын

after Fing around ALL afternoon and even with the trickle charger on it for the last hour, the car battery was now too dead to start the car. SO, LISTEN to the video and keep the battery charging while doing this or you'll be stranded with working remotes. HA!

Thank you video help me program my fobs

Congrats on the re-programming Randy, it can be frustrating for sure.. Not sure if you're aware, the C6 has an electric hatch pull to lock feature that is on all the cars. If you lightly close the hatch and set it on the mechanism it will electrically pull the hatch shut to lock it. I'm just being OCD now, but I cringe every time I see someone slam their rear hatch on one of these cars. Just lower the hatch down until it stops, some times you may need to just put a little downward pressure on it to get it to latch.. Just my $0.02.. Keep the videos coming !

@philwier2786

5 жыл бұрын

Convertibles don't have the electric hatch pull feature. You need to ease it down and then press.

@jasonmacneil2256

5 ай бұрын

​@philwier2786 what does that have to do with THIS CAR??

Worked for me. Thank you

Would you know why it doesn’t read key fobs when I get to “ready for fob1” it doesn’t read any of my keys and I’m putting them the right way

I have a used 2009 Corvette, have only 1 damaged FOB, need to add another FOB and Emergency Key. What part # did you use for new FOB & blank emergency key.

Nice - thanks to this i can help my neighbor tomorrow 😉

Thx Bro 🤙 I did it and it works 😉

Thanks for posting. One question: After the 3rd key was programmed did you remove it then press the bottom of the start button? Or did you leave it in the glove compartment? I couldn't really tell. Thanks buddy

@spazi11e29

Жыл бұрын

Were you able get it? I couldn't tell either. I left the fob in the slot and then hit the button and it didn't work. Did it work for you once u took the fob out and then hit the on button?

Do you have to program more than one fob /can you do just one

Question, did you buy your new fob from the dealer, or off of Amazon or a similar outlet?

Don't even own a c6 (yet!) but find it quite interesting!

where did you locate the new style fob. I have a 05 and I cannot find he fob.

1st shot! Thank you!

Thank tou this video was a big help

Good stuff 👍🏻

Ah, so both of your paddle shifters say “+” too huh? lol I just got my c6 a couple of months ago and wondered about that, is it normal for them to not shift when pressed sometimes even in high rpms, I’m 90% sure mine are broken or c6 paddles work different than any others

So if I program a new faub I must also reprogram my old one correct?

I did everything like u it work but now I have the engine light on and the car just came back from the shop so it should be good but when I start it I hear the little clicks if u know what I'm talking about that silent noise when u hit the start button when I hit to turn it off the acc is yellow and it says accessory mode on then I hit the circle button next to the acc it stays red then I lock the car and everything turns off and it locks itself so what could it be ?

How long did you wait at the end of the programming ?

worked thanks. the one thing i noticed though, it seems in yours the car is in accessory mode when you turn the key five times. that didnt work for me. got it to do it when it was off though. went perfectly from there.

I am a new Canadian owner of a C6 and fob 2 shows “Options Unavailable” when I’ve tried to personalize it. The Owner’s Manual states that Canadian legislation requires fob reprogramming can only be done at a dealership. Has anyone successfully reprogrammed a fob in Canada with this method? My fob 2 works but only in USA units of measure. Any guidance would be greatly appreciated.

Did u take the last key out before pressing the button

How did you turn off the door alarm while doing this? My 2006 has an annoying chime when I leave the door open in ACC mode.

Be sure to take the key back out of the trunk lock. I think the key could be removed after it is in programming mode but I didn't try it. My fobs didn't seem to work until I took the key back out though. And I think the first time I didn't have the fobs far enough away from the car.

The keyhole is in the glove box is that just like for a spare key or is that made for the programming

@AutoAuctionRebuilds

6 жыл бұрын

It's for programming, and for if the FOB ever dies. If the FOB dies the car will not run. You put the dead FOB in the slot and it allows you to drive the car.

@blakeherzner8548

5 жыл бұрын

that's so cool

I have anti theft light on my dash witch won’t let my driver window roll down. I’m about to try this and relearn fob. I hope this fixes my problem. Thanks for the upload. Much help

Hi nice video!

@AutoAuctionRebuilds

6 жыл бұрын

Hi there. Thanks!

Great job !!!!! thx

Thanks, very good help)

Thanks for the video, and good God could they have made this any more of a pain?

So, I just bought a wrecked C6 with 39,000 miles. It came with no keys at all. Can I program a new key fob without an original key?

Good video but why was your temp gauge up to about 150 deg and you just started it ...

*i don't forsee ever having this problem because i just can't stay away from 02-06 escalades at the moment and the fobs for those are super easy to program. this car of yours is a little in the confusing side and i'd have probably given up long before you did. i'm impatient with things like that and that's usually when problems occur*

Thanks i am going to do this👍👍

I just went out and did the 30 min it recognize the fob because at the end of all the 30 minutes programming u notice it said welcome Don 1 fob so it recognize the fob but the car still didn't start and all the l7ghts are on the car reads Corvette on the dash board but no go and the engine light is on still but everything else work battery good so dont know what I'm doing wrong and I only have one remote the other we lost it in the ocean so what the deal u think .

Driver side windows and mirrors are not work. Now when I program the keys will it start back work. Ever thing was working before I changed the battery

Nice that the customer/end user can do this for themselves... I'm surprised that one of the steps isn't to stand on one leg and pat your head while rubbing your belly though... I'm sure when these cars came out this was a "secret" that only dealers knew....

@AutoAuctionRebuilds

6 жыл бұрын

LOL for real!!