Thanks for all you do. Love the fabrication videos and the building rehab. May you, Julie and Connor have a Happy and safe 4th.

@HardCoreFab

2 күн бұрын

And a Happy 4th to you as well!

Excited to see a new video each week.

Anthony,thanks for explaining your thinking how you will engineer the suspension,most interesting.

Great video you. You can’t make everyone happy you did everything that everyone asked for from the last video!! Personally great job your craftsmanship and skills are awesome!! And the video quality was great really like the split screen. I even had the chance to to see my 53 behind 😮 looks like that right tail light is father along. Can’t wait to see it!!! Good morning see you in a few hours ….. looking forward to cruzin with hardcore fab in the patriot parade!!!

@HardCoreFab

2 күн бұрын

Hell yeah!

I can't wait till you start on the sleeper!

@HardCoreFab

2 күн бұрын

Yeah that is going to be fun

Happy 4th Julie and Anthony!

@HardCoreFab

3 күн бұрын

Happy 4th to you and yours too!

Very nice work Anthony Coming along nicely

Another great episode from ..HARDCOREFABS, I😎👍💯,,,👋Julie...

@ThatRustLife

2 күн бұрын

Happy 4th, Don!

@DonCatherman

Күн бұрын

@@ThatRustLife happy 4th to yall be safe..have fun..😎👍💯👋

Great job again Anthony!! You explain everything so well! 👍🏻 ⭐️⭐️⭐️⭐️⭐️

Coming along.

I'm loving this build. Look forward to you posting a video every Wed. Wish I lived closer to you guys. I would come over and lend a hand.

@HardCoreFab

3 күн бұрын

Thanks brother!

Yeh glad ur steps and fenders got lower..u won't have to extend like I had mentioned last month to ya ..great goin

GREETINGS AND BLESSINGS THANKS FOR SHARING 🙏

This is so amazing to watch. You have transformed something that the next guy would call scrap. I am loving this build.

Love this build

I love all the technical stuff! Keep it up!

Great job. Love the build so far. You make it look so easy.

@HardCoreFab

3 күн бұрын

Thank you!

Love this build! Nice score on the hitch

So you can put a round tube in a square hole! Lol looking good!

@HardCoreFab

2 күн бұрын

Haha You reminded me of this video. kzread.info/dash/bejne/gK5s1dWBZ6_PcpM.htmlsi=yOSQxxcpXOKWF8C6

@thercbarn5001

2 күн бұрын

@HardCoreFab lol that's a epp epic video right there! Lol

A deal is a deal !

@HardCoreFab

2 күн бұрын

TRUE!

Loving the build. I always wanted to build something like this only with a old semi cab like a old needle nose for a dailly lol. cant wait to see it finished.

@HardCoreFab

Күн бұрын

Yeah I would love to do an old Pete or Kenworth. Maybe someday we'll get lucky!

Another great video 👍👍

@HardCoreFab

2 күн бұрын

Glad you enjoyed it

Have a happy 4th of July!!🎉🎉

@HardCoreFab

3 күн бұрын

Happy 4th to you too Shane!

only thing i would change is i would center the joint in the tubing and taper both sides i just think would look more uniforme. great video thanks for sharing

@edryan2926

2 күн бұрын

Yes, and then the square tubing wouldn't have any tendency to twist. Hope not anyway...

@HardCoreFab

2 күн бұрын

Fair enough but I will be bolting it to the bracket with one tab that is off the side of the chassis and with one tab off the bottom of the frame rail. If you center it now the trailing arm will hang out pass the side of the chassis. I thought it would look cleaner to flush it up. I guess I could weld down both sides of the bung on the inside of the tube if I did it your way. Hmm Can't work on it today any more anyway with all the 4th stuff going on so I'll give it some more thought.

I love what you are doing to this ride!

@HardCoreFab

Күн бұрын

Glad you like it! I can't wait to drive it!

@RusThompson

Күн бұрын

@@HardCoreFab Well I may have to drive out to see you two and this badass rig!

that is going to be a cool ride

@HardCoreFab

2 күн бұрын

Thanks man!

@jasonanderson6714

2 күн бұрын

@@HardCoreFab your welcome

Love this!!

Hey could you make a bracket for the fenders on the frame, but then a slide rod on the axle so the fenders would be over the tires no matter if it is lowered or not. Just a thought. Can’t wait to see finished product!

@HardCoreFab

Күн бұрын

That is a thought

Looks good! Are you going to box the inside of the frame? I think you have created a weak spot where you squared off the frame for the bag mount, I boxed my P30 camper chassis to make it strong enough to tow with

@HardCoreFab

3 күн бұрын

It's all welded back together and the frame is doubled up in that area as well so it's over a 1/2 think in that spot. I'm not scared of it all all! Also if I box it there I wouldn't be able to unbolt the bag mount if needed

Your truck is going to be awesome are you still working on the chopped Chevy I liked the headlights and the chop just wanted to see if we were going to see more of it love the show thanks

@HardCoreFab

2 күн бұрын

@@CliffordUusma yes probably see a video on it in a couple of weeks

SFSG 👍

Loving this build! Im looking at doing something similar with either a '64 Ford T850 or a '55 model B Mack. Or both. I've been struggling to find a good good front suspension that is wide enough to fill the fenders and not deal with air brakes etc. Now if I can just get over the hangup of sliding a GM chassis under a Ford truck...

@HardCoreFab

2 күн бұрын

@RacelifeCo I won't tell anyone! LOL

Hello Anthony pout square solid bar in to your arms drill and tap it it will be stronger . But you might of thought of it if so sorry 👍

@HardCoreFab

2 күн бұрын

It would be an option but it's an odd size on the inside. The bar would have to be 1 9/16 x 2 9/16

😎💯

Are you going to box frame 5th wheel back ? And beef up the crossmembers in frame east west

@HardCoreFab

3 күн бұрын

Like I said in the video the frame is already 2 layers thick making it over a 1/2 inch so it should be ok I would think.

That's a better video

I'm new to the video, from what I've done shouldn't the air bag be compressed to it thinest size. Do like it

@HardCoreFab

Күн бұрын

Yes compressed when setting up the truck at full drop. On the rear I am using bags that are from a semi so a bit different then what you normally see. They are 8inches tall when compressed.

Doesn't the diameter of the air bag enlarge when under load? Do you have enough room from the bag to the notch, so they wont touch when bouncing down the road?

@HardCoreFab

Күн бұрын

Yeah we're good!

Is the hardcore fab going be cut out or you gonna cut it out of sheet metal and weld on top to give 3d look

@HardCoreFab

3 күн бұрын

I'm thinking the 3D look as of right now

@donniehamlett2157

3 күн бұрын

I've always liked the 3d look myself

Hi there where do you get those big rod ends from?

@ThatRustLife

2 күн бұрын

They are actually something we usually sell on Ebay, I pulled the listing because we are getting low, and I wanted to be sure we had them for this build. If you tell me what you need, I can see if I can help you out. We won't restock them because the shipping on them has become outrageous

@HardCoreFab

2 күн бұрын

What she said. LOL

Anthony, please don’t take this in a bad way I love your builds but I just have a hard time with all the talking , and I can hear you say then go erase where, If your not saying it your other fans are, so I guess I will have to will come back and see your reveal of your truck when your done, I do hope you win I watch a few other that are building for the prize but I like yours the best, Good luck will drop in time to time but will remove my self from the subscribe but will still buy your merchandise cause like I said I do enjoy your builds.

Love your builds and content. Please buy a microphone to clip to you shirt... your new shop is a giant echo chamber and your videos are hard to watch due to sound issues...

@HardCoreFab

3 күн бұрын

I have tried different ones and they have all sucked

@ThatRustLife

2 күн бұрын

They seem to pick up his beard rubbing on his shirt. Very annoying

How come you have not called me on that phone number I gave you???

@HardCoreFab

3 күн бұрын

I'm sorry I don't remember why I was supposed to call you

@PeterHatch-mx7zc

3 күн бұрын

@@HardCoreFab the torque converter

@HardCoreFab

3 күн бұрын

I'm sorry I guess I have missed a message where I was supposed to call you.

@HardCoreFab

3 күн бұрын

The KZread studio makes it really hard to see comments after my first replay

@HardCoreFab

3 күн бұрын

I've looked all over and I can't find your number. My number is 620-200-7469 if you want to chat