C5 Corvette gets HUGE technology update!

Автокөліктер мен көлік құралдары

Welcome 4K Viewers! Today, we are making a MAJOR stride in modernizing our 2001 Corvette. We are installing the Pioneer AVH-W4400NEX Infotainment system to replace the aging ACDelco unit. As seen in previous videos, this conversion requires the Axxess Interface Harness to adapt the new head unit to the factory Bose amplified system. We also found a highly rated backup camera to add to the system. Overall, this is a HUGE improvement to the everyday drivability of the C5 platform. The installation was certainly not difficult!
Products needed:
Head unit (Pioneer W4400NEX or similar) amzn.to/3jZ6lvS
Axxess Interface amzn.to/3liHfHY
Trim Bezel amzn.to/2X1iJ5v
Backup Camera amzn.to/38U8wdZ
12v USB-C/A plug amzn.to/3nkqDly
Easy wire connector kit amzn.to/2XbblV2
As always, thanks for watching 4K Motoring! Please give this video a "like" and subscribe to the channel for more content! We hope you found this video helpful, please let us know if you have any questions about the install! We would love to hear from you! Have you done this conversion yourself? Let us know how it went!

Пікірлер: 107

  • @washingtonfootballfanwgil8392
    @washingtonfootballfanwgil83924 ай бұрын

    Thanks! I don't even own a C5, but you've inspired me to attempt this if I ever do.🤓

  • @4KMotoring

    @4KMotoring

    4 ай бұрын

    Thanks! It was well worth it and definitely easier than I thought it would be!

  • @JustSayN2O
    @JustSayN2O Жыл бұрын

    Great vid! I bought my 2003 in 2015 with 10k miles. In 2018 I researched and bought all the necessary components for this same upgrade, including an aftermarket double-DIN bezel, but paid a high-end car radio/alarm shop to do the install, which turned out perfect. I asked them to leave the bezel off so I could drive it for a week and make sure everything worked perfectly before reinstalling the bezel. They're a pain to remove/reinstall, so I recommend this one delay in buttoning everything up. My infotainment system has two video inputs so I also installed a front camera, just ahead of the air dam. The alarm shop installed both the front and rear cameras for me, actually. The front camera turns on when I press a button on the infotainment system. Everything is perfect except for one complaint. Although the infotainment system uses bluetooth for the cellphone telephone connection, it requires a wired connection to the cellphone for Waze, Pandora, and ApplePlay functions. I may upgrade the infotainment system to one that uses bluetooth for all of these functions, but that creates a new dilemma for which I am seeking opinions. The wired connection that I must currently use also provides for cellphone recharging. A totally wireless system will not provide for simultaneous recharging, so I was thinking about modding the center consult by installing a cellphone charger that the cellphone rests on. I'm looking for inspiration and advice. By the way, there are guys out there (search e B a a y) that replace all the tiny bulbs with LEDs inside the HVAC controller unit. So do that while your bezel is off. Thanks and that was a great video!

  • @4KMotoring

    @4KMotoring

    11 ай бұрын

    I actually just did the HVAC update as well and it looks so much more modern now. As for the wireless option, it's nice to be able to leave the phone in your pocket on short trips and still use car play/ android auto, but it does suck down the battery fast. On anything but the shortest trips, you have to plug the phone in anyway to keep it charged. As I found, keeping the phone in the center console while charging and running wireless car play makes the phone overheat and shut down, wireless charging makes that problem even worse. I've been looking at getting one of the cupholder units for the back of the console and modifying that with a wireless charger (in a similar location to the new Corvette), but it has to have constant airflow

  • @sidneyke
    @sidneyke2 жыл бұрын

    Thanks for sharing this install video! This will help me a ton with my C5 double din head unit installation.

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    Glad you found it helpful! Definitely one of the best updates I've done to the car!

  • @dougdavis7079
    @dougdavis7079 Жыл бұрын

    I just ordered a headunit for my C5. I ordered mine from Crutchfield and they offer a wiring service for $25. I installed a similar unit in my Ram. Missed having it in my vette. Really good video.

  • @EricThePilot
    @EricThePilot Жыл бұрын

    Your license plate is correct! Thanks for the helpful video!

  • @henryretter1609
    @henryretter16095 ай бұрын

    Excellent video, thank you. Very thorough.

  • @jeffgrusky1115
    @jeffgrusky1115 Жыл бұрын

    bruh all the c5 owners are in NC i swear

  • @anarkhos6506

    @anarkhos6506

    Жыл бұрын

    🤷‍♂️ we broke and like to go fast. perfect fit

  • @VerrueckterKerl85

    @VerrueckterKerl85

    11 ай бұрын

    some are in Bavaria too. 😉👍

  • @victorjohnson2093
    @victorjohnson20932 жыл бұрын

    Great Video Thanks 😊

  • @rustyyoungblood6652
    @rustyyoungblood6652 Жыл бұрын

    Nice work Thanks

  • @TheRalphRoast
    @TheRalphRoast2 жыл бұрын

    looks great! I want to get something similar but just watching the install process I got frustrated hahaha and I refuse to pay someone to do it. Maybe ill pull the trigger after my sleepy eyes get here and finish that up. Great video!

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    While it was a very involved install process, fortunately it really was not difficult. The instructions were clear and everything worked. All together I spent less than $500 on the upgrade.

  • @AFVeteran1
    @AFVeteran1 Жыл бұрын

    Great video. I am doing the same thing with my c5 this weekend. In a couple of weeks I will be putting in a subwoofer in the area where the 12 cd changer is and it will fit under the trunk vanity cover so it should nearly invisible. Thanks!

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    Great idea! I use the storage spaces often so I did not want to sacrifice space, but the bass is definitely lacking

  • @stephendibari5010
    @stephendibari50102 жыл бұрын

    I did a similar project with my 2002 Lexus ES300 (without the sawzall) with an Alpine double din. nice job ! EDITED April 2023: Now that I’m saving up for a C5 Z06 watching this again for the 2nd time a year later. I’ve saved this for my C5. I noticed the placement of the backup camera is too far back. I would’ve put it closest to the rear edge as possible. Your getting the edges of the bumper in the peripheral view. Not a big deal but that would piss me off. Also, I would’ve mounted the external mic up on the Sun visor. I did this on my Lexus ES300. Ran the wire under the dash and up along the A pillar, the wire isn’t exposed, it’s tucked in between the panels

  • @joekoenig9587
    @joekoenig95879 ай бұрын

    I like the touchscreen radios as well… the only thing I don’t care for is the fact that the 12 disc CD changer is no longer usable. I use mine all the time, so this mod is not for me. Thanks for the nice video… you did a fine job!

  • @wacofives5094
    @wacofives50942 ай бұрын

    GREAT VIDEO...THANKS

  • @TheMjphoto45
    @TheMjphoto452 жыл бұрын

    I want to do this to my c5 but I like the bose sound with Sub

  • @davidnunya6296
    @davidnunya6296 Жыл бұрын

    niccccccce good work

  • @dirt69sbm
    @dirt69sbm2 жыл бұрын

    after watching all the install videos everyone seems to skip over the most critical part, the wiring, yes I know it differs with various stereos but basically they are all the same, I would be great to see wire for wire install from stereo head unit to axxxess interface or stock wiring harness. This is something that would be very helpful, Installing the stereo is pretty straight forward, cutting brackets, drilling holes etc.

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    I'll be honest, the wiring is probably the easiest part. The head unit connectors and the axxess interface are both very well labeled, it's just a case of matching up wires. The plugs then go to the vehicle and can only go one way. The axxess interface vibes with decent instructions as well

  • @dirt69sbm

    @dirt69sbm

    2 жыл бұрын

    @@4KMotoring I had some confusion with backup camera and getting the DVD player to show video but it all worked out. Also the 2 red auxiliary wires that are on axxess I didn't hook to anything like the guy from DriveHub suggested

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    @@dirt69sbm I tried to make reference to that video in mine, you're right, he got the red wires from the interface all messed up. Following instructions from the actual interface package and everything worked out fine for me. My biggest issue with the backup camera was that I needed the additional wiring harness that didn't come with my used head unit.

  • @Socialdecay864
    @Socialdecay864 Жыл бұрын

    Really nice video! Looks great too! I just subscribed to your channel! Could I have a CD Changer added on to this Double Din? I still have my cd’s and enjoy them to this day. After seeing you get rid of yours, that would be my 1st and only question, believe it or not Lol(Sincere Question) Thank you!

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    There is actually a CD player hidden behind the screen of this unit!

  • @brianpena4922
    @brianpena49222 жыл бұрын

    looks awesome. I've been wanting to do this to my vette but I've been a bit intimidated by it but you make it look possible. question though: all the double din bezels I've seen have the cup holder without lid. Are they all like that?

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    The whole job is definitely not as intimidating as it may first seem. All the wiring harnesses are well labeled, it is very hard to mess up

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    As for the cup holder, I believe they're all modeled after the same bezels, the useless cup holder is permanently open with no cover. You could probably convert the cover from your original bezel trim piece to just seal up that area and make it look better if you wanted to

  • @speedshack3366
    @speedshack33662 жыл бұрын

    🔥🔥🤟🏽🤟🏽🤟🏽

  • @zolitariglussey6302
    @zolitariglussey63022 жыл бұрын

    upgraded the old girl pretty good, now she's into the future and why would anyone want New!!

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    It's nice to make a car become exactly what you want it to be

  • @user-jj8qz9gg6o
    @user-jj8qz9gg6o Жыл бұрын

    Where did you get the wiring harness that your camera is hooking into? Thanks for the video has been very helpful!

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    I was able to find the pioneer AV wiring harness

  • @jimirox1928
    @jimirox1928 Жыл бұрын

    Great work! Where did you get the shifter ball? Thanks for your time.

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    It came with my Fidanza short-throw shifter kit, which was the least expensive new short throw kit for this car I could find, I'll soon be doing a comparison video between that and a more expensive shifter

  • @jimirox1928

    @jimirox1928

    Жыл бұрын

    @@4KMotoring Thanks for the reply!

  • @leroyb8276
    @leroyb82762 жыл бұрын

    Very nice install. Would you still have done the install if the head unit was going to cost almost $800 like they are now?

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    Absolutely, having android auto (wireless) and a backup camera are two huge improvements to this car

  • @marklyons4420
    @marklyons4420 Жыл бұрын

    Does the power antenna still work after the install? Thank you. Great video.

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    My car has the in-built windshield antenna, not the power antenna

  • @speedfiend925
    @speedfiend925 Жыл бұрын

    That screen looks SWEET! How many inches is it?

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    It's a 7in diagonal, Pioneer AVH-W4400NEX

  • @JasonDenzel
    @JasonDenzel4 ай бұрын

    Thanks for this great video. I'm going to attempt it soon with my 2001 C5. Is there a charger socket option that doesn't require cutting and soldering wires?

  • @4KMotoring

    @4KMotoring

    4 ай бұрын

    Thanks for becoming a member! This was definitely the best update I have done to the car to date. As far as the charger socket options, it really depends what you're looking for. The OEM module can be replace with no soldering, but there are a ton of options out there depending on what specifically you're looking for.

  • @aka_LocK
    @aka_LocK6 ай бұрын

    good video, looking to do this in a week or two. Anything you would do different now thats its had some time? Also what was the mistake with the camera initially?

  • @4KMotoring

    @4KMotoring

    6 ай бұрын

    Honestly I'm still super happy with the overall build. If I changed anything, I'd take the time to shorten the wires (limited space to bunch it all up) and use a newer head unit for ongoing compatibility. Just pay attention to the wiring harness and reverse camera trigger wire instructions.

  • @feyme0
    @feyme09 ай бұрын

    Great video, but I either missed or you skipped over the wiring between the head unit and the camera. Did you have to run wire/cable between the camera and the head unit or did you have adapters and re-use the wiring that ran between the cd player and the old head unit?

  • @4KMotoring

    @4KMotoring

    9 ай бұрын

    I stole power from the reverse lights for the camera. I ran the video cable and trigger cable through the cab back to the AV harness on the head unit

  • @bngately5757
    @bngately5757 Жыл бұрын

    What was the problem you had with the backup camera when you first hooked it up and how did you correct it. Thx. Great Videos

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    There is a trigger wire that I did not have connected. I assumed the camera suddenly receiving power from the reverse lights would trigger the input, but it actually needs to carry through to the wiring harness for the head unit itself

  • @IanDoohan
    @IanDoohan2 жыл бұрын

    Great video. I have a 4660NEX I’m putting in my 02 with the Axxess Interface as well. You went out of your way to mention that you didn’t run a 12v or acc wire. Did you connect all 3 reds together( 1 from HU, and 2 from Axxess?). A plus of the Axxess is retained accessory power. Does your radio turn on in the acc position and does it stay on when the key is turned off and removed like the stock one did? Appreciate your answers to these questions. There is so much misinformation out there.

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    Thanks for watching! When I connected the power wires, I followed the instructions with the axxess interface. I want to say I connected the two power wires to the head unit wire but I'm having difficulty remembering it exactly... I know I followed the instructions as they are written. As far as retained power, that's where it gets a little bit odd. The head unit will shut off when I turn the key off but then it will turn itself back on until I take the key out or open the door. It's a weird medium between no retained power and retained power. I will be completely honest and say it has not bothered me enough to try to troubleshoot it.

  • @IanDoohan

    @IanDoohan

    2 жыл бұрын

    @@4KMotoring thanks for your response, I appreciate it.

  • @brianpena4922
    @brianpena49222 жыл бұрын

    where did you run the rear view camera wire through. I re-watched the video thinking I missed it

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    I just drilled a small hole in the trunk pan to run the wire through, then applied a sealant to both sides. Was very easy, just pre-plan where you want to run the wiring.

  • @lobuzz311
    @lobuzz311 Жыл бұрын

    Nice documentation of the process. How is that Natika camera holding up for you? Of all their models, I think this form factor works best on the C5. I'm super weary of having to drill into the car if the camera is going to crap out after a few months. It would be nice to know if yours has been problem free.

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    The first one I had only lasted me about a month, the replacement was free under warranty, and hasn't had an issue since

  • @lobuzz311

    @lobuzz311

    Жыл бұрын

    @@4KMotoring Haha, wow... That's not a great sign. I ordered one, so hopefully it's longer lasting than a month!

  • @lobuzz311

    @lobuzz311

    Жыл бұрын

    @@4KMotoring So I installed one of these, and it is hit or miss whether it comes up on my head unit when put into reverse or does not send video. Tried it with a few different displays and it didn't always come on. Is that what you were seeing with yours, or was it another issue?

  • @christophermelochick8676

    @christophermelochick8676

    Жыл бұрын

    @@lobuzz311 if it does come on correctly sometimes then the wiring is correct, there's just a bad connection somewhere. The camera needs power from a source at the back of the car, I used the backup lights for that. In my car, I've had to replace the switch in the transmission that controls the back of lights several times, so make sure you're backup lights are actually working. There's a trigger wire that goes from the camera to the head unit to let the head unit know power has been applied and to automatically switch. Make sure all your connections are good

  • @bigbuckeye76
    @bigbuckeye76 Жыл бұрын

    What did you do with the emergency brake wire?

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    I left it alone

  • @leroyb8276
    @leroyb82762 жыл бұрын

    Could you tell me where you found an antenna adapter? It appears that the pin size is the same but the outside of the cable needs to be held firmly in the Pioneer head unit. Or am I way off on this. Sure do appreciate it!

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    I noticed it doesn't fit snug in mine either, but the coax connections do at least make contact. I haven't used the actual FM radio much but it seems to be fine

  • @feyme0

    @feyme0

    7 ай бұрын

    You probably already figured this out but for other people reading the comments, you need a Vehicle Antenna Adapter Cable which fits GM vehicles (1988-2008), the one I bought was a Metra 40-GM10 available for less than $10 (Amazon, Ebay, Crutchfield, etc.)

  • @randomnews4428
    @randomnews44282 жыл бұрын

    So do you have to manually engage the backup camera every time or were you able to get it to automatically switch on in reverse?

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    It automatically switches on when in reverse, I didn't have the trigger wire attached initially, but that was an easy fix and now it is flawless

  • @randomnews4428

    @randomnews4428

    2 жыл бұрын

    @@4KMotoring Cool, thanks for the quick update 👍

  • @cs1375
    @cs13752 жыл бұрын

    How much different is the finish on the new trim panel compared to the dash?

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    It's a similar color, a bit flatter than the OEM. Drive Hub has a video that shows the proper spray paint to exactly match, I'm happy with it as is

  • @cs1375

    @cs1375

    2 жыл бұрын

    @@4KMotoring thank you.

  • @Spyrify
    @Spyrify21 күн бұрын

    did you ever paint match the bezel?

  • @4KMotoring

    @4KMotoring

    21 күн бұрын

    I did not, with my Alcantara seats the plastic bezel looks like it matches pretty well. I've been hesitant to have paint come off with the high heat etc as opposed to bare plastic

  • @aricwilbur9473
    @aricwilbur9473 Жыл бұрын

    Did the backup camera get fixed so it comes on automatically when you go into reverse?

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    Yes, just needed the AV harness for the head unit

  • @chris-8597
    @chris-8597 Жыл бұрын

    10:20 where did you get that bracket?

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    It came with the double-din bezel

  • @papabear007
    @papabear0072 жыл бұрын

    Question you had to solder in wires?

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    The radio harness had to be soldered to the Axxess interface. The wires all come well labeled, all that was needed was the low-temp solder heat shrink connectors, I have a link for them in the video description. It was actually pretty easy overall, and all in for less than $500. Feel free to shoot me an email if you have any other questions about it. 4Kmotoring@gmail.com

  • @shaved1999
    @shaved19992 жыл бұрын

    Didn't you have to cut the center dash to fit?

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    Nope, only had to cut out the one aluminum cross-support that separated the factory head unit from the AC controls

  • @dirt69sbm

    @dirt69sbm

    2 жыл бұрын

    Replaced the center front console with one that has space for double din

  • @shaved1999

    @shaved1999

    2 жыл бұрын

    @@dirt69sbm explain please?

  • @foxgdsmck
    @foxgdsmck4 ай бұрын

    Were the side passenger cup holder attachment worth it? Considering buying not don't know anyone with them to verify how quality they are

  • @4KMotoring

    @4KMotoring

    4 ай бұрын

    So far they are the best cup holders I've found for the platform. Not perfect, but pretty stable and usable

  • @foxgdsmck

    @foxgdsmck

    4 ай бұрын

    @4KMotoring gotcha, do you have a link by chance? I found one on Amazon but 50$... kinda meh for how little I actually get to drive let alone have drinks in it other than a bottle of water lol

  • @skinsbigfanhttr1249
    @skinsbigfanhttr12492 жыл бұрын

    Can you give me the make and model of the head unit

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    Head unit and all associated parts listed in the video description. It was an older Pioneer W4400-NEX

  • @skinsbigfanhttr1249

    @skinsbigfanhttr1249

    2 жыл бұрын

    @@4KMotoring thank you

  • @papabear007
    @papabear0072 жыл бұрын

    1300 for a shop to do it including Kenwood I think kinda high

  • @onyx050
    @onyx0504 ай бұрын

    where are you based?

  • @4KMotoring

    @4KMotoring

    4 ай бұрын

    NC

  • @link9alink9a71
    @link9alink9a712 жыл бұрын

    It's not safe to drive Corvette C5 without radio that doesn't have volume knob you need to add steering wheel volume control wireless for easy to control

  • @4KMotoring

    @4KMotoring

    2 жыл бұрын

    Not sure exactly what you mean. It has physical volume buttons on the bezel and can be easily muted. I have responded to a lot of collisions, I've never seen one as a result of not having a volume knob

  • @stereolababy
    @stereolababy Жыл бұрын

    i don't trust anyone who buys ryobi tools

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    Value for performance, they're a pretty good analog of the C5 Corvette! Sure you could pay more for better tools, but you could also pay more for faster Corvettes!

  • @MetaView7
    @MetaView78 ай бұрын

  • @stfuandLiftBtCh
    @stfuandLiftBtCh Жыл бұрын

    Did you hook up the green parking brake wire?

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    No, I did not install the parking brake wire..

  • @stfuandLiftBtCh

    @stfuandLiftBtCh

    Жыл бұрын

    @@4KMotoring interesting. But it will not ply video when car is moving correct? I may get the parking brake bypass to play video while driving. But i thought you had to connect it somewhere if not

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    The only video I have set up is the backup camera, which gets it's power from the reverse lights. It won't activate when moving forward. The head unit is otherwise free to operate without input from the vehicle

  • @stfuandLiftBtCh
    @stfuandLiftBtCh Жыл бұрын

    My c5 and antenna wire won’t fit even closeeeee in the large connection. Did you end up buying an adapter?

  • @4KMotoring

    @4KMotoring

    Жыл бұрын

    I didn't use an adapter but there are several available. Mine was far from snug but still made contacts with the right parts. I haven't really listened to the radio much with Android Auto active

Келесі