Reminds me when i removed my engine. Took me like less than an hour. These engines are easy to remove. I blew mine over a boost leak and now i put the turbo back on lol

Sure do miss having dad, i sure hope i can be as good a dad to my daughter as your dad is to yourself. He's been a great guide for yourself.

@ambushdrift

6 жыл бұрын

Dinxsy you’re going to be a great role model to your daughter, 110%! I’m very lucky to have drift dad

most underrated channel on youtube

@Mk6gti_flores

6 жыл бұрын

I think that every time I watch his videos.

@tylerisgreen001

6 жыл бұрын

Agreed.

@Luke-nu1kc

6 жыл бұрын

Honestly I agree

@ambushdrift

6 жыл бұрын

JohnStax appreciate the love guys!

@MrBetonarme

5 жыл бұрын

i was just gonna say that

Reminds me of my dad and I :D. We never pulled my engine out but we did do a breakdown of the Rotrex supercharger after it broke. We are the lucky few with awesome dads. Much love!

@ambushdrift

6 жыл бұрын

Tommy Mccoy exactly!

I need ya in my life. My timing cover needs a new seal. you guys motivate me to get it done soon. good stuff guys!

You guys got that engine out so quick took me and my uncle around 2 hours to replace a window regulator

About to do this with my son. We’re in Florida also. We have a Series Blue BRZ we’re stuffing a LS3 in.

Ayyy Drift Dad is back! Great quality content as always man.

@ambushdrift

6 жыл бұрын

Rodrigo Flores appreciate it man!

Ur father like a dream bro🛂 ..💓🤜 🤛💓 big like for him

DriftDad you are "The MAN" !!

Drift dad cracks me up

Quality dad and son time

Drift dad reminds me of mike from dirty jobs.

@ambushdrift

6 жыл бұрын

Mike Hunt he gets that a lot!

Just a suggestion if you ever do this again, just disconnect the shifter from the transmission. A lot simpler than taking out the center console.

Yaay for drift dads return

You might get great use outve a quick jacks lift system you might wana look into one they look awsome i am seriously looking myself

Another great video😌🤙

I can't wait for drift dad story time!

My BRZ blew cylinder 3 bone stock at 55k on the clock. The total cost to have Subaru remove the engine, rebuild it, and reinstall it in the car came to $8500ish. I could check the receipt for an exact number if you're curious. So, when all's said and done, if you're under that number you can roughly calculate how much you saved.

How bad was it disconnecting the harness? A ton of connectors or no? Also did you have to pull anything off for the motor to clear the engine bay? Just curious in case i ever have to rebuild my motor.

Hey bro can you give more info to what all you had to do this is a 2013 brz with a 2015 motor??? Was it plug an play what did you have to do to get it running

Drift dad❤

Drift Dad from the dynamic duo!

Mind if I ask how it blew? Seems like it was stock so was it just high revs and beating on it consistently?

What are those wires hanging from the washer fluid box do they have a part number and where do they connect to?

Hey ambush what year was your dads old engine that blew ? Did u go from a old year engine to a new year engine swap?

Where did you guys order your engine I been searching for another Fa20 engine and I cannot find any at this point my car has rod knock aswell :((

Just finished removing the engine today from the bay, took about 12 hours total along with the help of someone. The fly wheel bolts were the hardest part, definitely not fun nor easy. Probably going to spend the next 3 - 4 days putting the new engine

@ambushdrift

2 жыл бұрын

You got this brother!

I still think you put the turbo fa20 from the white Frs into the BRZ and keep the BRZ a nice street car. Then do the oblivious thing and 2JZ swap the white Frs.

What happen to DriftDad bandanna?

whats the name of the intro song? its amazing, and its not the song in the description

Such knuckle busters

Soooooo ready for the rabbit and the bear! XD

Put the LS1 in there?

well, you have a ls1 laying around there right? :D

日本車を楽しんでくれてありがとうございます🙌

Was this engine NA, boosted? How many miles? We’re you the first and only owner. I want to know what makes these engines fail or if their all design flaws and all or most of these engines will blow.

I've never been this early

BEAMS SWAP IT! pls boss

what was the intro song

9:01 im crackin up Lmao

It’s sssooooo much easer to unbolt the trans, and remove the engine without the trans especially a manual. But great job anyway. 👍👍👍

@ambushdrift

5 жыл бұрын

Appreciate it man :)

I love this 😂

Do these engines suffer from rod knock it left stock or just when boosted

@Q-64

4 жыл бұрын

Honestly speaking it shouldn't happen when stock, but anything can happen. With boost it's highly likely as you add miles. That's why my next mod is to rebuild my engine with rods, pistons, studs, bearings and gaskets. That way even if I boost it for a while the car will be good for a long time.

LS1?

Who's da man!? I'm da man, I'm da man, I'm da man!

The gas in the AC system can kill you if you inhale too much of it almost immediately, no joke. No way it would have done harm to you since the ventilation was so good but that shit is seriously deadly.

What transmission does an frs have? Like the actual part number for the the trans not just “issa 6 speed”

@PoptartKingz

6 жыл бұрын

use google lol, nobody on a youtube comments section is going to know off the top of their head

@brettrobinson7486

6 жыл бұрын

Max Swagg already tried that and google was being a smart ass about it...

@deeerek0756

6 жыл бұрын

Aisin AZ6

Build it with forget internals and turbo for 400 whp.

Who is the man....both of you make a man. Lol 3 hours with 2 people isnt bad. I had no help until the pull and did it in 4

@ClimptonDiddlehopper

6 жыл бұрын

Me and my oldest pulled 3 supra engines in one day and put another back in that night. Just giving you a goal to shoot for father and son tag team.

@ambushdrift

6 жыл бұрын

Billy Beane for us noob mechanics, 3 hours is amazing. We definitely need more experience but you gotta start somewhere 😎

So this rabbit and bear story, is it going to be like a bed time story or the type of story your uncle tells you at thanksgiving after a couple drinks?

@ambushdrift

6 жыл бұрын

Nicholas Rodrigues pretty much hahaha

VVTI 1JZ

Bro Alan you got to 2J swap Mikes car plzzz lol Have a good day Alan👍 Srry but I might miss a few vids im going to Cedar point with my family and cousin so yea Sorry But I will always like before watching like always❤️❤️ Have a great day Mike as well🤙

@ambushdrift

6 жыл бұрын

DLN Official OG

2JZ?

Knock knock! Who's there? Your engine. Noooooo. Lol.

@ambushdrift

6 жыл бұрын

Jason Redding R.I.P. :(

I thought you can remove the engine without taking out the transmission

Why did you decide to leave the transmission on?

@williamgoyette8726

2 ай бұрын

that what i thought, could pull just the engine?

I need to know the story about the rabbit and the bear !!!!

Ohhh thank feck when you said you were guna tell us the story about....."the rabbit and the bear" for a split second I thought you were guna tell us how babies are made...feeww.

I wanted to here the rod knock

U dident need to unhook the ac pump u coulda moved it with the lines still on it

2JZ!!!!

Drift dad says he hopes the freon isn't a carcinogen... but doesn't he smoke??

@ambushdrift

6 жыл бұрын

Patrick Tran with the fireeeeeee. 100% true!

IM THE MAN... men

Its illegal to vent refrigerant into the atmosphere. You need to use a recovery machine next time, its very bad stuff for the enviroment

Like for 2jz

@deanthakid9803

6 жыл бұрын

Come guys blow up like button 2jz all the way...

2jz = drift dad ... he promised

You know, I can have the engine out of my '98 Impreza RS in about 3.5 hours, by myself. So who's really the man?

@ambushdrift

6 жыл бұрын

Arthur Raber you are 😭

@arthurraber3839

6 жыл бұрын

It's okay young grasshopper. But Subaru really does have a good system for making it easy to work on their cars, which is why I love mine so much.

Swap in something different.

swap to 1jz. its cheaper than 2jz and sounds good also

@jadenbelgrave1766

6 жыл бұрын

Hell yeah

@666ILIKETURTLES666

6 жыл бұрын

jz swaps are all in the trans.

Just put a 2jz on the brz

You can just unbolt the compressor and move it to the side. Letting the freon go like that is really bad for the environment, and your health lol...

2jz😏 save

Ls swap or 2jz

Well there is your problem.... K&N oil & airfilter... yeah greater flow initially with poor filtration = high performance temprorary with increased wear & soon engine replacement.... simples 😋 No free lunch in this WORLD.

The (men(sos)

I heard post molone and was tempted to click away

Son looks embarrassed but tbh dad is legit funnier than him

@ambushdrift

3 жыл бұрын

he's such a character, and it's a known fact my viewers like him more than me haha

Great car, shit engine. After recall had a rod knock issue. Apparently happening to A LOT of Fa20 engines. Just goes to show, not a Toyota engine under a Toyota hood....its shit.

Likes for ls swap