By Far The Easiest Back Paddle Kit Installation TOMSIN BDM 030
Ойындар
The new tomsin back paddle kit that comes with 4 back paddles is by far the easiest kit I've installed for the PS5 PlayStation 5 dualsense controller. The kit is simple and good for FPS first person shooter game. The paddles can be remapped to the buttons on the front with out any issue, and it comes with TURBO mode, which can give you a advantage on those fighting and games like war zone and call of duty.
15% OFF KONTROL FREEK WEBSITE: glnk.io/3vlxq/Gamer2Know
Tomsin BDM 030 Paddle Kit: amzn.to/3R4Png3
$49 BDM 030 PS5 Controller (LIMITED TIME) amzn.to/47jV53x
Precision Tweezer Set: amzn.to/48n9U60
Thank you for watching. Don't Forget to subscribe :)
Пікірлер: 50
Bro i was genuinely terrified I'd mess something up. But your tutorial helped all the way through. Thanks a lot 😅
oh snap i just got 3 of these BDM030 rollers and i was looking to install back paddles and see which one is good, might just get this kit. i play comp for apex legends this might just do it! love the video! crazy i just got the rollers and this video drops lol my luck
@Olas-GE
7 ай бұрын
Check "extreemrate RISE4 Remap Kit" . I t should be much better then this one. Just my opinion
Everyone be careful of controller models there is a bdm 040 looks exactly like the 030 mainlt seen with the new metallic but its not limited to, kit should still worm the extremerate bdm 030 works on the 040 but be aware
@TheGamer2Know
7 ай бұрын
Yes I spoke to Tomsin. This kid will work on BDM 030 and 040
@ivs4040
Ай бұрын
@@TheGamer2Knowthe first cable wont fit
how do you turn off turbo mode, my bottom left paddle has been stuttering when I use it to build in Fortnite I haven’t tried out the top left and top right paddle yet but the bottom right paddle has been smooth when I use it as my edit button I just need to figure out how to stop the bottom left paddle from stuttering
I like the tomsin paddles but I like the grips for the rise4. I wonder if I get the grips I'd I can put a tomsin on it.
Why did mines work for the first two days then now after like 2 minutes it goes to a straight red colour and then I have to turn off controller and on again for it to reprogram ?
Hey for some reason my x button wont map to any of my paddles. They both seperately work but not together
Mine worked till it was to late to return. I'll go back to the 2 button style from exstream. Makes the d pad go down or something.
I want to buy this, I just installed new buttons on my controller and didn’t even check if it was 030 or 040 the model number is CFI-ZCT1W if anybody can help would be appreciated
With the rise 4 remap kit metal for the bdm-030 extremerate I keep clicking it by accident is this a better choice
Thank you for the video. But my triangle won't work at all now?
I did this but can’t map any paddles to standard can anybody help or explain plz?
We can change bouton of R3?
Hey in ur experience are the touch pad board married to the mother board of the PS5 controller bdm 030
@TheGamer2Know
7 ай бұрын
There is a ribbon cable that is connected from the touchpad board to the main motherboard
喜歡聽你說故事。聲線吸引,內容清晰❤
for me the part with TESA os to smal. the holes are to far apart. anybody got tips
@BBGFLIX
6 ай бұрын
You probably have a bdm 30 or something like a different bdm from what you bought
so the left side of my controller don’t work did i do something wrong help plz
@CracknCheese
4 ай бұрын
Hey man, I had the same problem. Got it fixed. First time I put it all together, my left d-pad and joysticks weren't working properly, I would have to press hard on the up arrow to move the left and right. Took it apart put it back together, then it worked, suddenly my d-pad was constantly pressing down during game. Took it apart again, put it back together, then no buttons worked. Took it apart again and watched other videos. So the problem is that gold connection that you place overtop of the clear one, I also want to mention that I did take the whole controller apart and whipped the button sensors, when I put it back together, I made sure everything was in properly, I think what happens is, when we put the motherboard back on, it's a bit difficult to align (for me anyway) without nudging that strip (is what I suspect). The motherboard is held by two little black plastic prongs, they are just near the two blue strips in each side. I want to also note, when I did it this time, I didn't completely take out the motherboard to install the strip, but enough to give me some playroom to make it easier to put back without accidentally nudging the strip when putting it back. Also, there are two stickies on the strip that you install, make sure the little sticky isn't exposed, it will stick to the motherboard and make the connection loose when its all put back together. Screw everything tight. Hope this helps, I know how frustrating it is.
@CracknCheese
4 ай бұрын
Also, it's hard to do with the strip connected to the battery, I was worried if I took it off it wouldn't stick properly, but I did it several times and it still sticks back on.
My pfc doesn’t work
Mine is already worn out
does the bdm 030 controller in the description still a 030 or its now a 040 ?
@TheGamer2Know
5 ай бұрын
It’s whatever they send you. But the this kit works with both 030 and 040
How do I take the back of my controller off I still need help
@TheGamer2Know
3 ай бұрын
Maybe you can watch my teardown video for help: kzread.info/dash/bejne/gKaNu5ODqK3aj9I.html
Wait can i map all the paddles to standard or no?
@TheGamer2Know
Ай бұрын
ya
will this also work on a bdm 40
@TheGamer2Know
6 ай бұрын
Ya
do you build people's and send them back im willing to pay ofc its cool if you dont just wanted to know
@TheGamer2Know
6 ай бұрын
You can buy at my eBay store www.ebay.com/usr/angeltronix
Am i able to use a bdm-040?
@TheGamer2Know
Ай бұрын
Ya
I installed it and now my touchpad wont work but everything else does
@TheGamer2Know
2 ай бұрын
on the motherboard there is a ribbon cable on top. that connects the touchpad, perhaps you did not connect it or the connection is not good??
@DireTire69
2 ай бұрын
@@TheGamer2Knowits connected
the first cable dont fit bru
bro i thought this was a strick pack
Amazing tutorial as always Edit:first
If your controller isn't turning on the piece that connects to the mother board must be over the flap not under the flap To map the buttons the ps5 must be off with the controller plugged in happy trails 🤝🏼
He didn't show the most important buttons for rainbow six siege which are the L3 and R3 lol
doesnt work for 040 do not do this
This is a scam, it’s messed up all my buttons, it’s messed up my triggers and I’ve had to buy a whole new controller, don’t buy this
@shard841
Ай бұрын
My triangle won't work at all?
@ballislifeali6985
Ай бұрын
Or maybe you fucked something up ? lol