We finally tackle the leaky front end on the BX1500. Long overdue repair for this great machine
Жүктеу.....
Пікірлер: 32
@IronOakSawmill2 жыл бұрын
Sorry guys. We lost signal, and couldn't stay til the end. Hope everyone enjoyed the premier. Have a great weekend.
@joelnickerson67392 жыл бұрын
Now that's a job Chuck. It's good that you can figure things out and fix things. More work but you save a big labor cost if you had the dealer do the work.
@debfromthemill6945
2 жыл бұрын
Hi Joel and yes you're right, the cost of this going into a shop would of been a big bill alone. Take care
@IronOakSawmill
2 жыл бұрын
I was blessed with the ability. It's a good feeling to do the work yourself, but I know my limits. Big Ford transmissions is one of them. LOL
@user-ui1gl4yn4v10 ай бұрын
Good going guys
@outdoorsinthe6082 жыл бұрын
Great how to video Chuck!👍👍
@IronOakSawmill
2 жыл бұрын
Thank you very much. I hope it helps someone else out.
@outdoorsinthe608
2 жыл бұрын
@@IronOakSawmill my tractor needs them seals replaced also been leaking for a while now…
@IronOakSawmill
2 жыл бұрын
@@outdoorsinthe608 If you decide to do them, I hope it helps.
@ralphledger12212 жыл бұрын
Aircraft mechanic dittos. Nice job. Kept everything clean and didn't spare the assembly grease and oil. One of the more impressive how to vids I have seen on U-tube. Well done. Regarding that seal removal tool it is real easy to score the seal housing surface if you aren't careful. Snap ring pliers are one of the tools I don't try to save money on when I purchase them. No place for cheap Chinese. Best Regards.
@IronOakSawmill
2 жыл бұрын
Thank you very much. Definitely cautious about the with the seal housing surface. Seal is no good when the mating surface is junk. Sourcing a legitimate set of snap ring pliers. Don't use them much, but no sense fighting with a garbage set when you do need them.
@JoesFirewoodVideos2 жыл бұрын
I’d like to watch but I don’t wake up until 8am
@debfromthemill6945
2 жыл бұрын
That's okay Joe. Take Care
@IronOakSawmill
2 жыл бұрын
Just grab the replay Joe.
@IronOakSawmill2 жыл бұрын
Thank you to everyone who joined the premier. We know it was early, but we wanted to chat with whoever could make it.
@avelezusmc79292 жыл бұрын
Thanks for the video I've learned much today
@debfromthemill6945
2 жыл бұрын
Thank you so much for watching. Take care
@IronOakSawmill
2 жыл бұрын
We are hoping it helps folks out. Thank you as always for stopping.
@donaldtrabeaux52352 жыл бұрын
Awesome video Chuck
@IronOakSawmill
2 жыл бұрын
Thank you Don. We hope it helps someone complete this repair on their BX1500
@hardworkingmanoutdoors2 жыл бұрын
My first tractor was a BX.
@IronOakSawmill
2 жыл бұрын
Definitely a great machine. Anywhere we used it, people were impressed by its power.
@billboy73902 жыл бұрын
Anyone who owns a tractor needs to know how to fix them. At least you can still get parts.
@debfromthemill6945
2 жыл бұрын
Yes Bill and we are grateful for that. Take care.
@IronOakSawmill
2 жыл бұрын
If not, you better be ready to pay big to have it repaired. Hope this video helps someone make these repairs to their BX1500
@jimp.45312 жыл бұрын
no pinched or crushed fingers is always a good sign, hehehe.
@IronOakSawmill
2 жыл бұрын
Good to go home, the same way you came in. 😆😆😆😆
@kennethpwhritenour27012 жыл бұрын
I rebuilt a 24 hp Kabota front end and they’re not easy
@IronOakSawmill
2 жыл бұрын
Lots of heavy iron to deal with for sure. What model tractor was it?
@debfromthemill69452 жыл бұрын
Sorry everyone we lost the signal when we got here.
@debfromthemill69452 жыл бұрын
Sorry Scheib we didn't take the dually.
@phuongvuhuu89442 жыл бұрын
Need your Email. I need more information about your ash logs, thank you
Пікірлер: 32
Sorry guys. We lost signal, and couldn't stay til the end. Hope everyone enjoyed the premier. Have a great weekend.
Now that's a job Chuck. It's good that you can figure things out and fix things. More work but you save a big labor cost if you had the dealer do the work.
@debfromthemill6945
2 жыл бұрын
Hi Joel and yes you're right, the cost of this going into a shop would of been a big bill alone. Take care
@IronOakSawmill
2 жыл бұрын
I was blessed with the ability. It's a good feeling to do the work yourself, but I know my limits. Big Ford transmissions is one of them. LOL
Good going guys
Great how to video Chuck!👍👍
@IronOakSawmill
2 жыл бұрын
Thank you very much. I hope it helps someone else out.
@outdoorsinthe608
2 жыл бұрын
@@IronOakSawmill my tractor needs them seals replaced also been leaking for a while now…
@IronOakSawmill
2 жыл бұрын
@@outdoorsinthe608 If you decide to do them, I hope it helps.
Aircraft mechanic dittos. Nice job. Kept everything clean and didn't spare the assembly grease and oil. One of the more impressive how to vids I have seen on U-tube. Well done. Regarding that seal removal tool it is real easy to score the seal housing surface if you aren't careful. Snap ring pliers are one of the tools I don't try to save money on when I purchase them. No place for cheap Chinese. Best Regards.
@IronOakSawmill
2 жыл бұрын
Thank you very much. Definitely cautious about the with the seal housing surface. Seal is no good when the mating surface is junk. Sourcing a legitimate set of snap ring pliers. Don't use them much, but no sense fighting with a garbage set when you do need them.
I’d like to watch but I don’t wake up until 8am
@debfromthemill6945
2 жыл бұрын
That's okay Joe. Take Care
@IronOakSawmill
2 жыл бұрын
Just grab the replay Joe.
Thank you to everyone who joined the premier. We know it was early, but we wanted to chat with whoever could make it.
Thanks for the video I've learned much today
@debfromthemill6945
2 жыл бұрын
Thank you so much for watching. Take care
@IronOakSawmill
2 жыл бұрын
We are hoping it helps folks out. Thank you as always for stopping.
Awesome video Chuck
@IronOakSawmill
2 жыл бұрын
Thank you Don. We hope it helps someone complete this repair on their BX1500
My first tractor was a BX.
@IronOakSawmill
2 жыл бұрын
Definitely a great machine. Anywhere we used it, people were impressed by its power.
Anyone who owns a tractor needs to know how to fix them. At least you can still get parts.
@debfromthemill6945
2 жыл бұрын
Yes Bill and we are grateful for that. Take care.
@IronOakSawmill
2 жыл бұрын
If not, you better be ready to pay big to have it repaired. Hope this video helps someone make these repairs to their BX1500
no pinched or crushed fingers is always a good sign, hehehe.
@IronOakSawmill
2 жыл бұрын
Good to go home, the same way you came in. 😆😆😆😆
I rebuilt a 24 hp Kabota front end and they’re not easy
@IronOakSawmill
2 жыл бұрын
Lots of heavy iron to deal with for sure. What model tractor was it?
Sorry everyone we lost the signal when we got here.
Sorry Scheib we didn't take the dually.
Need your Email. I need more information about your ash logs, thank you