Im gonna have to do this for my pixar collection Buzz
@user-it5st6fh7nАй бұрын
Nice
@beyondplastic20692 жыл бұрын
Good job on the cockpit made from scratch!! I also modified a couple of these for my GI Joe Classified figures, these ships work great for other toy lines.
@johngman2
2 жыл бұрын
Thanks man! This is a great ship. I’m having fun.
@marvinonstage Жыл бұрын
This ship is now on clearance at Target for $14.99
@chrismeulblok82392 жыл бұрын
FYI, you can tap the 'rivets' out with a pin punch and hammer from the small side of the rivet. It doesn't require much force, but be sure to brace the parts sufficiently.
@johngman2
2 жыл бұрын
That’s good to know. I hate them.
@robertnovelli29602 жыл бұрын
Holy shit bro that's incredible, great job👍. I'm thinking on doing one for the classified figures.
@johngman2
2 жыл бұрын
Thanks man! Good luck.
@robertnovelli2960
2 жыл бұрын
@@johngman2 Thanks
@robertnovelli2960
2 жыл бұрын
So how'd you put it back together? The same rivets?
@davidmiller71424 ай бұрын
What paint did you use? The plastic primer I used is still a bit tacky.
@J.D.Vision2 жыл бұрын
I used a skinny micro screwdriver and a hammer to push the rivets out, couple of light hits and they easily came out.
@gregwilson8823
Жыл бұрын
How did you get the cockpit flaps to go back on? You didn’t show that
@muddfoot692 жыл бұрын
So did you just drill out the rivet? Would have like to have seen this
@johngarzillo67602 жыл бұрын
Did you scratch build the seats or are they 3D printed? Also where did you get the figures??
@johngman2
2 жыл бұрын
I made it out of styrene plastic sheets. The figures are Joy Toy.
Пікірлер: 19
Im gonna have to do this for my pixar collection Buzz
Nice
Good job on the cockpit made from scratch!! I also modified a couple of these for my GI Joe Classified figures, these ships work great for other toy lines.
@johngman2
2 жыл бұрын
Thanks man! This is a great ship. I’m having fun.
This ship is now on clearance at Target for $14.99
FYI, you can tap the 'rivets' out with a pin punch and hammer from the small side of the rivet. It doesn't require much force, but be sure to brace the parts sufficiently.
@johngman2
2 жыл бұрын
That’s good to know. I hate them.
Holy shit bro that's incredible, great job👍. I'm thinking on doing one for the classified figures.
@johngman2
2 жыл бұрын
Thanks man! Good luck.
@robertnovelli2960
2 жыл бұрын
@@johngman2 Thanks
@robertnovelli2960
2 жыл бұрын
So how'd you put it back together? The same rivets?
What paint did you use? The plastic primer I used is still a bit tacky.
I used a skinny micro screwdriver and a hammer to push the rivets out, couple of light hits and they easily came out.
@gregwilson8823
Жыл бұрын
How did you get the cockpit flaps to go back on? You didn’t show that
So did you just drill out the rivet? Would have like to have seen this
Did you scratch build the seats or are they 3D printed? Also where did you get the figures??
@johngman2
2 жыл бұрын
I made it out of styrene plastic sheets. The figures are Joy Toy.
Do you have Instagram?.
@johngman2
2 жыл бұрын
I’m at johngmanseattle.