You can buy repair manuals for these jet skis. I bought one for mine and it saved me a lot of money from having the dealer repair it. The manual shows how to check and repair everything on it, even how to rebuild the engine. Well worth the price to buy one.

@TheHomePros6221

Жыл бұрын

thanks I’ll get one

@oldkoot5828

Жыл бұрын

Where can i buy one for a 2000 seadoo bombadeir gtx?

@SkiPutt

Жыл бұрын

@@oldkoot5828 they’re free online! Just search your model and there’s a website with all of them

@lincolncruz2484

Жыл бұрын

@@oldkoot5828google

The Seadoo has 3 2 stroke oil lines, one small one to each carb intake and one large one that goes to the bottom of the block. If you are going to premix the gas, you may not be getting enough oil into the bottom end. Engine may not run for long. Best bet is to restore the origional oil system. Good luck with them, they cleaned up nice

@TheHomePros6221

Жыл бұрын

very very good info!! thank u soo much!!

@zakiramjan9822

11 ай бұрын

so glad i came across this comment.

Haven't ever owned or worked on jetski stuff but rebuilt car engines and I really enjoyed this thanks so much for the effort. 👍

@TheHomePros6221

Жыл бұрын

Thanks for watching I appreciate it my friend!!

Really good video. Hope this means you will look for other nonrunning jet skis and make more videos just like this. I love seeing old skis come to life after being considered junk. Last year I bought a 2001 Yamaha XL800 for just $350, rebuilt it for next to nothing and it is my family's favorite.

@TheHomePros6221

2 жыл бұрын

thank you so much means a lot!!! I think I’m going to do a fresh top end job on both so I mite make a video on that and actually get some good riding video also, thanks for watching

@ryanbuckner2405

Жыл бұрын

You are the man Papa Don! I just bought a 2003 sea doo gti that actually runs great, but I know I’ll have to tinker with it. Your video on whether or not to buy an old 2 stroke helped me decide to get it.

@TheHomePros6221

Жыл бұрын

@@ryanbuckner2405 yea don good work on the skis on your vids

That was a really good video, you tracked down a lot of issues was nice to see em back out on the water and running well! Great job on getting those old skis out there again

@TheHomePros6221

Жыл бұрын

Thank u very much nick!!😊

I will tell you the early Seadoo and Yamaha's were notorious for the Honeycomb/aka resinator fails and when they do it restricts flow through the exhaust, they sell what is called a D-Plate which eliminates that resinator but still allows back pressure, just keep that in mind

@TheHomePros6221

Жыл бұрын

That’s really good to know I plan on rebuilding them I’ll check it out

What a beautiful looking place! Nice being by the water! Great that you got the dash going so easily!

@TheHomePros6221

2 жыл бұрын

Thanks Dave I appreciate that, yea I couldn’t beleive it when it worked. Looking foreward to seeing your upcoming projects

Great channel, you give allot of info and make it easy to understand.

@TheHomePros6221

Жыл бұрын

I appreciate that! thank u soo much!!

Gidday Darrell, just found your channel and love the content, visuals and narrative of your videos, so decided to subscribe and come along for the ride. I see you have quite a few videos so will be binging a bit to get a feel for your work. Well done anyway mate, great skills

@TheHomePros6221

Жыл бұрын

Thank you so much Gordon!! That really means a lot to me I really appreciate people like you thanks again my friend!!

Great video. Keep em coming

@TheHomePros6221

2 жыл бұрын

thanks man I really appreciate it

awsome video,hope to see more love your stuff

@TheHomePros6221

Жыл бұрын

Thanks Paul I really appreciate that!

Great job getting them running Darrell !

@TheHomePros6221

2 жыл бұрын

Thanks bill!! I appreciate it very much

Think it's awesome to see old skis brought back to life... Wish I had the time and money to snag some old ones up, and get em running and pass the savings on to someone who can then take em out and enjoy em... Look forward to seeing more on these and other projects

@TheHomePros6221

Жыл бұрын

thank you James!! I’m working on part2 now both skis have major engine damage that im fixin

Epic man can’t wait to see you get these back to a1

@TheHomePros6221

2 жыл бұрын

Thank u very much man I really appreciate it!!

You can usually tell the usage by the upholstery, the seats get worn and tattered before anything else. Both of those seats looks really nice for their years.

@TheHomePros6221

Жыл бұрын

very good observation!!

Man I told myself I would never get another carb anything anymore 😂 I am glad you made it work!!!!

@TheHomePros6221

Жыл бұрын

haha thank u brother!!

You da man, what a troubleshooting genius!

@TheHomePros6221

Жыл бұрын

Thank u so much brother

Almost 8k subscribers! One of my favorite A.C videos is about waverunners and I don’t even like being out on the water! Have to sleep now but will watch the whole video tomorrow.

@TheHomePros6221

2 жыл бұрын

Yeah I loved his videos on them also, I really wanted to get more video riding them to the dam and other areas but they aren’t registered yet, video was getting long and I wanted to get the vid out on the 4th I’m kinda upset I didn’t include riding and drone footage

@NilsKall

2 жыл бұрын

@@TheHomePros6221 I think you made a good decision, people are off and have time to watch their favorite KZreaders (🍺)

@TheHomePros6221

2 жыл бұрын

haha thanks nils

Alright now I have seen the whole video, good one as usual. What is a wear ring? Good that you found that solution with the dash! Stay safe!

@TheHomePros6221

2 жыл бұрын

Thanks a bunch my friend!! A wear ring is a ring around the propeller that wears from sand and normal usage it will cause cavatation when worn

Dash issue isn’t an issue. Working as it should from my understanding. Great work!

@TheHomePros6221

2 жыл бұрын

thanks man!! the dash wasn’t working neither was the start switch after I bypassed the pass lock it all worked like it should 😊

Nice to see abandoned jets keys come back to life again enjoy them 👍

@TheHomePros6221

Жыл бұрын

😊thank u very much

Awesome content :)

@TheHomePros6221

11 ай бұрын

Thanks!🙂🙂

Awesome! Good work.

@TheHomePros6221

2 жыл бұрын

Thanks josh!!

Great video... You make it all look so easy.. wish I had your talent.. .bee happy bee strong.

@TheHomePros6221

2 жыл бұрын

Thank u soo much!!, you too my friend 😊

We got to work on your definition of clapped out, those are way newer and nicer then most skis I pick up. I need to see grass growing inside of it and mold for days !!

@TheHomePros6221

2 жыл бұрын

yea I hear ya, I think the Yamaha mite need a rebuild and the gtx prob could to, I know it needs a wear ring and prob more carb work along with a dash

Impressive man, good job!

@TheHomePros6221

2 жыл бұрын

MY BROTHER FARTSACK!!!!!!!! HOWS IT GOING MY GUY!!?? Thanks man I appreciate it!!

@FatherVinyard88

2 жыл бұрын

@@TheHomePros6221 Always blessed to see the effort and work ethic you put into your videos. FartSack out, God bless.

had a pair of the gtx's 97's they are a blast to ride and bullet proof, just go keep carbs clean and ou good to ride

@TheHomePros6221

2 жыл бұрын

Yes sir I had a gti they were a blast

I have the same ski. I don’t know if anybody answered your question about the dash the gauges but it does that to save the battery when you’re out in the water when you have the engine off so that’s normal that dog cages turn off after the engine is off.

@TheHomePros6221

Жыл бұрын

it’s working fine now after I bypassed the pass lock, but before it didn’t work at all unless I jumped the solenoid

Enjoyed this video

@TheHomePros6221

2 жыл бұрын

hey thanks man I appreciate it!!

You have to unplug the lanyard and then back in to get the screen up , or press start . It times out , normal

@TheHomePros6221

2 жыл бұрын

trust me I tried that and a million other things

Just showing support, love the channel !

@TheHomePros6221

Жыл бұрын

Thank u soo much!!

I’ve got almost the same set. 97 sea doo gtx and a 2001 xl700 the Yamaha runs like a dream the gtx always needs repairs. I also have the shop manuals as a pdf if you need them.

@TheHomePros6221

Жыл бұрын

that’s awesome!! I’m rebuilding both engines rite now and making a part 2. if it’s not a bother and u wanna send me the manuals my email is Alberici.darrell@gmail.com thanks man!!

I appreciate the video.

@TheHomePros6221

Жыл бұрын

I appreciate you joe

Great project thanks for sharing. Listening to it run i think you can hear one cylinder is a bit rattley.

@TheHomePros6221

2 жыл бұрын

thank u so much and yes I think your rite I plan on doing a new top end rebuild

You will enjoy every mile on that craft knowing you fixed it yourself

@TheHomePros6221

Жыл бұрын

yes it really makes you appreciate it more!!

Thanks for the mention. If I had 90 psi in one cylinder and 120 in the other I would at least swap rings out. Glad you figured out that bad dash.

@TheHomePros6221

2 жыл бұрын

Yea man I was really thinking the same thing I’m prob gonna tear it down and see the condition of the cylinders and go from there, if the nikasil is damaged I’ll send em off like u did and I think it’s running lean from the o rings in the fuel sender

Fine job my man 😎

@TheHomePros6221

Жыл бұрын

Much appreciated thank u

If the wave runner 800 is similar to my 760 there is a blue wire connection under the front storage bin that when you disconnect it and reset the code should enable the dash I believe. Once the ski is running you can plug the blue wire connector back together.

@TheHomePros6221

2 жыл бұрын

I already did that it’s how u test the dash

We’re praying for you to have a complete healing ❤️‍🩹👍🏼

@TheHomePros6221

2 жыл бұрын

thank you so much I really need it 😔

For the Yamaha, adjust the idle in the water after it is warmed up. Also the display is operating normally, once you turn off the ski the display shuts down pretty quickly. Good move keeping the oil injection, the pumps never fail, just the lines

@TheHomePros6221

2 жыл бұрын

Thanks for the tips, the dash wasn’t working correctly at first the start button didn’t work either but I fixed it at the end of the video

@Yamacati

2 жыл бұрын

Premix never fails 👍

@TheHomePros6221

2 жыл бұрын

@@Yamacati u are correct

@cwatson42785

Жыл бұрын

I beg to differ on keeping the oil injection. #1 failure on 2 stroke skis is that oil injection failing and you would never know. My reasoning is why even take that chance even if it's small. Like guy above said, premix never fails!

@TheHomePros6221

Жыл бұрын

@@cwatson42785 u can’t go wrong with premix!!

Tip from the saltwater marine electronics people: put a little bit of pure lanolin (AKA: dielectric grease) on both sides of every connection to stop corrosion. It'll save a lot of grief later on.

@TheHomePros6221

Жыл бұрын

great tip thanks!!

Loved the Andrew Camerata name drop there 🤗

@TheHomePros6221

2 жыл бұрын

Haha thanks brother

nice job 👍🏾

@TheHomePros6221

Жыл бұрын

thank u!! part 2 coming out shortly

1. That gas was pre mixed. You should have seen it when started. That thing smoked white 2. 90 psi is not that much, but can be stuck piston ring.

@TheHomePros6221

Жыл бұрын

yea it may have been mixed but I wanted fresh stuff

Fairly certain these are our jet skis. We sold them about 5-6 years ago and they came from Houston, Texas.

@TheHomePros6221

2 жыл бұрын

They guy I got them from said he bought them new but I’m curious do u still happen to have the vin numbers? And I can check them?

Thank you

@TheHomePros6221

11 ай бұрын

no thank you 🙂

Keep it up bro

@TheHomePros6221

2 жыл бұрын

Thank u so much man

Awesome that you got them working. Sometimes a little perseverance goes a long way. Especially for the great deal you got them for.

@TheHomePros6221

2 жыл бұрын

You got that right! thanks a bunch!!

For future refrence the yamaha gauges are supposed to do exactly what they are doing , because they do not have a battery switch or key etc , when you crank it turns it on , when motors off it goes into sleep mode

@TheHomePros6221

2 жыл бұрын

mine wasn’t cranking at all with the switch, the dash has what’s called a pass lock system and it’s common to go bad so the start button won’t work, once I swapped the wires I bypassed the pass lock and now the switch works along with the gauges and everything works like factory and still has the security code.

@seangreene64

Жыл бұрын

@@TheHomePros6221 I think by bypassing the security lock the engine will start , but it will stay in limp mode.

Thats awesome you got the yamaha running. I also had to take the powervalve covers off and soak them with wd40 and replace the little shaft couplings between them they were all broken.

@TheHomePros6221

2 жыл бұрын

Thanks for the tip! the power valves seem to be working fine but I know they are prone to going out

That Large oil line on the sea doo lubes the rotary valve. You need to make sure to keep it full and check it every few rides. Dont think it uses a bunch of oil

@TheHomePros6221

2 жыл бұрын

Thanks for the tips! I really appreciate it

I've got a 98 gtx ltd in pristine shape...after a rebuild its super fun...Def built to go fast....the faster you go the more stable they feel..

@TheHomePros6221

2 жыл бұрын

that’s awesome man!! I had a similar gti back in the day also

@headinghome8914

2 жыл бұрын

@@TheHomePros6221 for sure...I put a black aftermarket seat on mine...and I swear it made the ski more comfortable but it also looks ten years newer...just food for thought for use or resale

@TheHomePros6221

2 жыл бұрын

@@headinghome8914 it could use a new one black would look good to

Awesome!!

@TheHomePros6221

2 жыл бұрын

thank u!!

Great video!

Nice job

@TheHomePros6221

2 жыл бұрын

Thanks man!!

You are a great young man

@TheHomePros6221

Жыл бұрын

thank u very much!! that means a lot!!

Oven cleaner is also a good engine degreaser and a lot cheaper 😁👍🏼. I saw it being used on another channel a guy was working on his dozer

@TheHomePros6221

2 жыл бұрын

oh yea I’ve used it it works great

ok good on u thanks

@TheHomePros6221

Жыл бұрын

👍😊

It would be great if you could source a new display for the dash - wouldn't have to be original if the size fit. I imagine all that's wrong with that screen is that it's old as LCDs degrade over time. Enjoy your videos, thanks.

Subbed !

@TheHomePros6221

Жыл бұрын

thank u so much!!

Yeah that lock tight is something else

@TheHomePros6221

Жыл бұрын

sure is

Nice buy and Great job getting them back to action!....You'll have to bring them here to Gunner Lake and we can sell tickets and do a stunt show 😁😎

@TheHomePros6221

2 жыл бұрын

Thank you so much brother!!! Hahahah yea that would be awesome

@southernhomesteadtransformatio

2 жыл бұрын

For sure 😁

Sounds like you got a cracked Reed, oil injection is only a lil bit of a spurt, but if you delete it you save a few pounds, if you pull carbs on any 2 stroke, you should also be pulling and inspecting the Reeds and Reed cage as well since it's only a few more bolts to rem9ve since it's right behind the carb

@TheHomePros6221

2 жыл бұрын

That could be possible! I should have checked it

never run it without those oil lines hooked up! Unless your premixing your gas. Ours are on 50:1 premix. I got a block-off plate for ours. The dash is typical. Won't be on unless your putting your code in or the engine is running. Other than that its always off. Oil injection is proportional to engine rpm. More oil will come out at higher rpms. Very good design. People that have had issues, don't maintain their oil system like they should. Ours have replacement engines and it calls for premix instead of using oil injection for whatever reason.

@TheHomePros6221

2 жыл бұрын

I never ran it without the lines connected, if I did I put the oil in the gas and premixed it

Give me Disel Creek vibes ...love the videos.

@TheHomePros6221

2 жыл бұрын

thanks brother I really appreciate it!!

My Dad has that Yamaha 800XL I don't want to get your hopes up, but it was clapped out when it was brand new :( On the bright side, from the impression gleaned from several of the played out tricks seen bare backing the poor ole XL odds are it has contracted the clap as well!

@TheHomePros6221

8 ай бұрын

Lol check out my other vids on it if u want I cure it if it’s clap

If you connect water hose to your flush adapter you fest start the engine for 5 second's then turn on water when your dune turn off water first then turn off the engine . You never want to put water in to your jet ski if the engine is not running first if you do it will damage your jet ski. I see on line 15 second's max with no water going to the jet ski I hope this helps some good luck on them

@TheHomePros6221

Жыл бұрын

yes you are correct!

Those would be great for a river run, If you ever come to Missouri with them let us know!

@TheHomePros6221

Жыл бұрын

Sweet!

I do belive those zipties for the oil injection need to be a certain thickness to pinch the line. It seems like a crap design but it works well and usually the lines get hard and need replaced before zipties.

@TheHomePros6221

Жыл бұрын

They should have use a metal crimp clamp, Yamaha is notorious for low hour engines like this one being ruined due to crappy lines and zip ties

10:41 Noooo legit the troubleshooting is the best part!!

@TheHomePros6221

Жыл бұрын

check out my other videos on these I end up completely rebuild them

@flyingwithsol

Жыл бұрын

@@TheHomePros6221 yeah nearly finished the third one. Loving it. I was wanting to buy a blown motor ski myself and do this too. #inspiration But first I have to finish rebuilding the motor on the “project” bike I bought a year ago lol

@TheHomePros6221

Жыл бұрын

@@flyingwithsol that’s so awesome thank u soo much it means a lot🙂

Not sure if this was mentioned yet, but I had the same model (04 xlt 1200), and the dash turns on when you hit the start button, then turns off a few seconds after turning the motor off. If the motor is off, it normally won't stay on past a few seconds.

@TheHomePros6221

10 ай бұрын

yes I know this but mine wouldn’t start or anything it’s a very common problem

Nice Job … so you’re in GA? What part? I was looking at possibly taking on one as a project in the near future. Being not as close proximity to a lake/pond to test in, would make it a bit more cumbersome. Love how also you had a Ridgid shirt on while using all Dewalt 😂

@TheHomePros6221

Жыл бұрын

Yes I am! in Columbus ga / phenix city al area, haha I like dewalt better 🙂

Great stuff. So in the end what is the easiest to work on and the simplest? Also do you prefer two stroke or four? And what brand do you like best. Thanks.

@TheHomePros6221

2 жыл бұрын

I like the Yamaha because it’s newer/cleaner..ect but I do like the newer seadoos that are 4 stroke, I actually plan on maybe selling these and getting a four stroke they are way more reliable

Great video. Even though you had the Mikuni parts breakdown, I doubt you needed it as you have such intuitive skills. Were you tempted to fix the Seadoo oil injection pump? What do you do with the old gas? Some run it thru a coffee filter and use it in their fuel injected cars. That makes me nervous. I have no place that recycles old gas. Kind Regards, Craig

@TheHomePros6221

2 жыл бұрын

Thanks man yea I didn’t really need it but it’s cool they included it, I wanted to fix the oil inj on the sea doo put previous owner removed the oil tank and some parts 🤷. I usually mix in the old gas with a lot of fresh gas and dilute it and run it in cars like u stated, gas is to expensive to throw away unless it is just to far gone

@andyclarke3895

2 жыл бұрын

I have used old gas in my lawn mower, when I have restored old cars/bikes with old fuel in them. £100 lawn mower doesn't care!

@TheHomePros6221

2 жыл бұрын

@@andyclarke3895 yes I also use it in mowers as long as it doesn’t have junk in it

on tractors there is a ecm or computer chip...usual flat brake pad looking shape with wires going to it on bottom or edge of engine...sometimes under dash and causes your issue

@TheHomePros6221

Жыл бұрын

I fixed the problem later in the vid, thanks for the info

WANT TO THANK EVERYONE WHO FOUGHT FOR OUR COUNTRY AND MADE IT POSSIBLE TO ENJOY THE FREEDOMS WE HAVE TODAY, THANK YOU AND HAPPY FOURTH OF JULY EVERYONE!!! 🇺🇸💪

@NilsKall

2 жыл бұрын

Happy 4th!

@TheHomePros6221

2 жыл бұрын

@@NilsKall thanks nils!!

@r2d2326

2 жыл бұрын

That Yamaha xl800 was a score! Having trunk and frunk bins included is a little rare these days too! Just chiming in my .02. Not sure if its been mentioned but The dash only turns on when cranking and running and shuts off 10 seconds after stopped. Theres also an hour meter built in there too. One thing I didn’t notice in the vid, but if you crank the ski and don’t allow it to start, the power valve actuator should cycle a full open close stroke to clean the valve. I don’t think that unit has a catalytic converter, if it does, its pretty standard practice these days to remove it and install a cat delete plate (D-plate) also, if the previous owner has not done so, I highly recommend getting a set of Wave eater brand power valve clips. Takes out the slop and makes it impossible to drop a valve into the motor from the linkage walking off. Other than that, the 800s are considered pretty durable and she’ll sell quick if you’re flipping it. Other than that, check out the “Yamaha wave runner 2 stroke” group on FB. Tons of great helpful people there who are very knowledgeable. Enjoy the ski! See ya on the water!

@movingearth3726

2 жыл бұрын

Het a new wear ring for the gtx

@TheHomePros6221

2 жыл бұрын

@Zyxalis thank u sooo much for all of the info!!! Yes later in the vid I got the dash working it shows 102 hrs the power valves cycle smoothly but will get some clips, im gonna do a topend rebuild also, I don’t think this one has a cat

yo I have one of these Yamaha skis out in New Zealand I had the same trouble with cranking look at the plugs from the switch you'll find that the clear one with the black and brown wire is corroded inside😮

@TheHomePros6221

2 жыл бұрын

very good tip thank u!!

I think something is broken between the battery and the low amp starting circuit, I would trace the positive from the battery through the low amp wires until you come to a break. The dash comes on bc the stator is powering it while charging the battery.

@TheHomePros6221

Жыл бұрын

I checked every wire, the dash is common to go out like this, I did get it working, check out my other vids on them

well done sir, are you a semi trained mechanic,. any way great video alot of work but so worth it in the end cool.

@TheHomePros6221

Жыл бұрын

thank u very much Harry I’m glad u checked out the vid I really appreciate it!!

Good

@TheHomePros6221

Жыл бұрын

thanks Craig check out my latest vids on them

Just to let you know that big line going to the crank are on the seadoo that was under the carbs you need to fill that line with oil it keeps the rotary gear lubricated

@TheHomePros6221

2 жыл бұрын

thank u so much for the info!!

@5.slow-ranger

2 жыл бұрын

@@TheHomePros6221 no problem man

Check the compression again now that you ran it. See if it improved.

@TheHomePros6221

2 жыл бұрын

I think it got worse

A bro I tell everyone viniger mixed with dish soap is a very good degreaser cheap to you can mix a couple gallons in a sprayer

the line on the seadoo that goes to the crankcase needs to have oil in it to lube the rotary valve

@TheHomePros6221

2 жыл бұрын

The big line that’s blocked off?

@zppeacock

2 жыл бұрын

@@TheHomePros6221 yes

@rosswhipple720

2 жыл бұрын

He is right the rotary gear is a oil bath that has to have oil at all times.

@TheHomePros6221

2 жыл бұрын

thanks a bunch guy

i bought one way back in 2010 from marketplace they said it never worked got home found out only spark plugs were needed and bam thing started up no issues bought for 100$ sold for 5k hehehe marketplace baby! 😁

MM77 Approved 👍🏼👍🏼…………I’m starting to think you can fix just about anything!! LOL!

@TheHomePros6221

2 жыл бұрын

Hahaha well if I could only fix myself

I'm glad I cam across your video. I have a question, on the gtx after you put the carb back in noticed when you try to start it would just "thud" any idea why it's doing that? Getting my ass kicked on a 97 gtx, hard to crank especially with both plugs in

@TheHomePros6221

2 жыл бұрын

thank you!! well it could be a couple of things, solenoid could be bad, starter motor could be bad, it could be getting flooded very quick so make sure carb isn’t leaking and is set correctly, could be somthing internal like a bent rod also

I would definitely have removed the plug(s) and thrown some oil down the cylinder(s) before attempting to turn the engine over.

@TheHomePros6221

Жыл бұрын

I did off camera

90 and 120....unless your really bored, just leave it....in my experience those things have two speeds, off and wide open! Just run em, they will probably serve you well for years to come....I mean really what's the worst that could happen. 🤔 😆

@TheHomePros6221

Жыл бұрын

Well I rechecked and the Yamaha rear cyl was at 60psi 🙁

Short on start button. 12v isn't going to Soleniod coil or coil is burnt and shorting. This would explain dim dash, Soleniod not activating, and start button not working. I think anyways

@TheHomePros6221

Жыл бұрын

The solenoid is bad on the Sea-Doo the Yamaha works perfect now

Heck yes i wanna see part two ive got a jet ski a 98 yamaha 650vxr it was running good but has wierd issue with fuel turns right ok but left hand turns wants to cut out believe its something in fuel delivery.that and a small water hose popped off going to heads and went into limp mode,i rehooked it up now ok,wish someone could explain water sucking routing on these machines.snooky pa.

@TheHomePros6221

Жыл бұрын

hey Allen check out my other vids on these if u want🙂🙂 thanks brother

Just saw your video i herd you mention Jet works over in Alabama made you a key the guy that did it was his name Chad if so, he is a good friend of mine.

@TheHomePros6221

Жыл бұрын

I think that was his name, he was the owner, I kept asking him to sell me his kubota lawn tractor lol

The whole dash thing on the yamaha is normal the dash wont come on untill you hit the start button or on some untill the engine is acually running

@TheHomePros6221

Жыл бұрын

I tried that numerous times many different ways, this is a common problem on these dashes

Check your resistor caps on your spark plugs. See if they're broken inside.

@TheHomePros6221

Жыл бұрын

check out my other videos rebuilding these if u want 🙂

@davidcollins1853

Жыл бұрын

@@TheHomePros6221 I will. Glad you got the dash fixed. Didn't watch to the end. I had a motor scooter that had the same problem didn't want to start everytime. Oddly enough the cap on the spark plug was the problem.

If memory serves the Yamaha should have 120 psi compression and the Sea-Doo should have 150. 90 is low. Did you test it again after you ran it for a while? Does the Yamaha have an air box or flame arrestors? It might run lean without them. I wouldn't use old 2 stroke oil. I've seen it gel in the lines. You need to check/replace the oil in the jet pump.

@TheHomePros6221

2 жыл бұрын

yes I think the comp is a little low I tested after running and it was even lower so I think it’s time for a topend, it has the arrestors and the cover, oil is also new

I saw those same ones on Facebook

@TheHomePros6221

2 жыл бұрын

I bought these a long time ago, I actually traded them for somthing I paid nothing for

The gas may have had some evinrude premix in it.

@TheHomePros6221

2 жыл бұрын

likely but I know it did sit for awhile

happy 4th of july from denmark :)

@TheHomePros6221

2 жыл бұрын

thank u brother!! hope u had a great one

@putzeus9953

2 жыл бұрын

@@TheHomePros6221 dont really celebrate it here but yeah good work day ig 🤣🤣

@TheHomePros6221

2 жыл бұрын

@@putzeus9953 well hope u had a good day anyway 😊

mine is a 2005 rxt nice ski abd flies since new

@TheHomePros6221

2 жыл бұрын

That’s awesome is that a four stroke?

@kenfrazier616

2 жыл бұрын

@@TheHomePros6221 runs like a rocket someone lighter runs about 80 and with me now right at 75

@TheHomePros6221

2 жыл бұрын

@@kenfrazier616 dang that’s crazy fast on the water!!

Hey I’m rebuilding a 1998 seadoo gtx . I’d LOVE your input on a issue. I replaced the battery and a fuse got it to crank but won’t fully turnover . It did sit outside covered last winter. I was thinking or replacing the carbs.

@TheHomePros6221

Жыл бұрын

Carbs are prob ok, if it’s not turning over then sounds like piston or somthing messed up in the engine, or maybe even starter