I run a 500hp 22r turbo in my 73 Toyota carina.. runs 10.60's..that was 15 years ago it still is sitting my driveway today. Nice build

@2gioz

3 жыл бұрын

Damn I wish I had 500 lol, sounds like a quick car‼️ Thank you 🙏

@theclan4adventures

3 жыл бұрын

@@2gioz in a word.. its violent. Was a 93 stock block lc stage 2 head with street cam sidedrafts and 250 shot fogger .. ran 12's. After burning a hole in #4 piston for the rebuild went to 81/2 to 1 je pistons used the stock crank and stock rods but they were shotpeened and magnaflux ..basically lc stage 5 head fully built.. custom turbo cam ..arp head studs hks head gasket.. custom equal length tubular manifold with external hks race gate Garrett t68 around 22psi rc 96lbs injectors on pump gas. Sds system for management. Runs 11lb clutch flywheel set up so basically on/off lol Love your truck nice work

@2gioz

3 жыл бұрын

@@theclan4adventures wow that sounds like a lot lol, thank you, you as well‼️

@madmod

3 жыл бұрын

@@theclan4adventures kinda puts away the idea the stock 4 cylinder cant handle much power. Stock block in the 12s in no joke

@theclan4adventures

3 жыл бұрын

@@madmod that was stock block over 200k miles with just a street cam (stage 2 lc) sidedrafts and a 250 shot fogger ..car is light though compared to a pick up.. pick is almost double the weight so..

Always awesome seeing young people fixing there old Toyota's! Mine been in the family since 1988, still going strong.🏜️✌️

@2gioz

3 жыл бұрын

These things are awesome, this truck was passed on to me by my old man, and I couldn’t be happier with it. It was his first truck and mine as well!

Wow simply amazing. You know I just got myself a 94 4x4 3 inch lift with a 33 inch tire 🛞 2 months ago and I just hope one day could tune it just like you did. Keeping the 22Re engine just like yours

freakin right on, that was bad ass man, loved it. that has encouraged me to do that to my 88 , 22re sr5.

Saying those numbers are impressive is an understatement. Thanks for putting the effort in building a savage 22re. Im on my 3rd now and would be over satisfied making a little over half that with my LCE goods. Killer build man!

@2gioz

3 жыл бұрын

Ben Ruether these things are tough to build up power lmao, I think my next upgrades are going to be fuel tech 450 and delete my distributor and all that 💩

Saw this on insta can’t wait to follow the build

*_Finally I found this video!_* so inspiring. Can't wait to start working on mine soon 🥺

Congrats!, and big TY to Rudy for finding the mistakes; sounds like a pro. Your driving my dream truck btw, keep livin the dream. Was just checking your clay paint job refurbish vid, and decided to click this one too.

Prettiest toyota truck I ever saw. I actually have people pulling in my drive way to try and buy mine all the time. Mine looks like shit. Great video. Thanks for sharing your masterpiece.

Damn , that's bad ass! Nice job. I have an 1980 pickup short bed that I want to keep the 4 cylinder in it and turbocharge or supercharge and this confirms it.

@2gioz

3 жыл бұрын

Thanks man, and good luck‼️

Thats an impressive truck my friend! Looks great too!

Damn that’s some decent power from that 22re. I’ve always wanted to turbo mine but I think I’m goin a different route with a sbc swap in my 84

wow awesome man this is making me reconsider the 22re no one ever post they're power numbers on these things.

@2gioz

3 жыл бұрын

That’s what you’re all here for lol thank you 🤘

That video just opened my hope again lol I have an 83 that im planning to boost im building it for drifting everywhere i go I see people saying that anything more than 150 on any 22r/e engines is outlandish thank you aton for this video it gave me hella hope and motivation

@2gioz

3 жыл бұрын

I’m glad I motivated you! That is my goal 🙏

@JoseHernandez22r

3 жыл бұрын

Im sure you did internals inorder to push that much hp

@2gioz

3 жыл бұрын

@@JoseHernandez22r definitely

@JoseHernandez22r

3 жыл бұрын

Did you need forged pistons? I already bought some h bean rods and im going to send in everything to get balanced like the harmonic pulley rods pistons crank and flywheel and clutch

@2gioz

3 жыл бұрын

@@JoseHernandez22r yes I did

that’s one rowdy 22re! nice work

@2gioz

3 жыл бұрын

Thank you❤️

Sick truck and sick engine, would love that for my 77 Celica Liftback.

@2gioz

3 жыл бұрын

Thank you !

Love this build man, cool shit.

Now I have faith on my 22R Build

Thank you for this I was building a 1976 celica gt with a 22re original engine so this is permo for me

Nice truck man!! I would recommend to stay way from engine while on dyno, you never know what could happen! Stay safe. 🤙

@2gioz

3 жыл бұрын

Always brother, it sure is true! Thanks for the look out ❤️

That spool gonna make everyone wanna race you , to bad it won’t be a race , it’ll be a spanking on their end, haha good stuff tho mate keep it up!!

@2gioz

3 жыл бұрын

😂🥵 thanks mate

Man that is a beautiful truck!

22re is the one of the best engines ever made. and the toyota pickup is one of the best trucks ever made. Can't go wrong with this truck.

@bigharrykochenbauls4567

2 жыл бұрын

It's a forklift engine..

Excellent build! ✌

Awesome build! My dad has a 91 just sitting around and is too old to drive anymore. We dropped in a new 0 miles motor in like 6yrs ago but no one really drove it afterwards. Gona start making the interior more likeable like new seats, carpet, sound deadening, and power windows bc it was basically a work truck.

@deadjoey77

3 жыл бұрын

bro if you find seats that fit nice without pushing the driving position forward, come back and @ me in this comment. im thinking about trying a miata seats or maybe some mini cooper seats idk. its hard to tell what will fit.

@bigmac22ify

3 жыл бұрын

@@deadjoey77 4Runner sr5 bucket seats the basically bolt right in

Swaggle me eyes !!!! This is one of the nicest hilux's I've seen ( I'm in Australia that what we know them as hear) I've got a similar make to yours but it's a space cab love what you have done with the 22re.......I found your video looking for info anything 22r 22re

@2gioz

Жыл бұрын

I appreciate the love! ❤️

Nice truck mate. Awesome.

@2gioz

3 жыл бұрын

Thank you ❤️

Thatdudeinblue needs to review this yota.

What a neat little truck

@2gioz

3 жыл бұрын

Jonathan Ciaccio thank you

Sounds lovely

Nice! I have an 86 turbo 4runner with a non turbo 22re swap I'm learning about stand alone ecu's and bought a speeduino plug and play for a Miata na6 turbo project. Can't wait to get a turbo for the 4runner.

@2gioz

3 жыл бұрын

Nice man, good luck 🙌 and thank you

@sergiosalazar6837

3 жыл бұрын

Do you have any videos of your 4runner?

Awesome truck!

Awesome truck, dude. Are you in the Florida Tacoma’s fb group?! We’d love you to bring the truck to a meet up soon🤙🏼

@2gioz

3 жыл бұрын

I am not, that sounds like fun!

Sick build man! currently in the process of swapping a 2Jz into my 99 taco, what ecu did you end up going with? I really like Haltech but was curious about what route you went. keep up the solid work man!

@2gioz

3 жыл бұрын

That is sick man, I went old school with microtech lol, I do want a fuel tech FT450 though.

Nice build👍. I had a 94 1/2 hilux 4×4 wanted to boost it but never did

@2gioz

3 жыл бұрын

Thank you 🙏 and they are awesome trucks 🙌

That's a bad ass truck!

Kissimmee??? Nice ! I want to get my 93 celica Gt tuned but i dont even know where to start

damn, own a 22re in a celica, diffidently inspiring to get that turbo kit

@2gioz

3 жыл бұрын

This setup on a celica would be killer ‼️

@edwinmarquezcolon4232

3 жыл бұрын

Im swaping one on a ae86. What manifold are you running?

@2gioz

3 жыл бұрын

@@edwinmarquezcolon4232 this setup on an ae86 would be killer💪 I am honestly unsure, it came with a motor I got a few years back, I believe it’s custom made

@edwinmarquezcolon4232

3 жыл бұрын

Thanks for the reply man. Im following your instagram for more updates on her. And tbh You scared me with the new thumbnail today 🤣🤣🤣

@2gioz

3 жыл бұрын

@@edwinmarquezcolon4232 nice to know it worked ! I hope it doesn’t bite me in the ass 😅🤦‍♂️

Sounds awesome

Love this to be honest , ammm the question I want to ask though , where can I get raps like that for my seats and door? love the ones you have in this

@2gioz

3 жыл бұрын

I didn’t buy a wrap, it was a full custom upholstery done on her 💪

@ramonehenry3311

3 жыл бұрын

@@2gioz oh kk thanks , am actually about to get My 87 pickup Toyota ofc , seats and door customize as well but just seeing this let me would want mine to look like this to be honest , “she is hot “ So that’s why I ask , because am just on the internet seeking ideas on how I can do mine , but man this is sweet !!

@2gioz

3 жыл бұрын

@@ramonehenry3311 awesome! Thank you so much 🙏

Dope truck dude! I miss my 94 xtracab

@2gioz

3 жыл бұрын

Thank you ❤️ and they sure are awesome trucks ‼️

@Jursaw

3 жыл бұрын

@@2gioz post more videos of it!

@2gioz

3 жыл бұрын

@@Jursaw for sure bro 😎

thats INSANE!!

310hp at 25 lbs of boost out of a 22re engine... that's gonna be one spicy meatball. Careful with that high center of gravity!

@2gioz

3 жыл бұрын

Need to lower it a bit🤔

@trentp151

3 жыл бұрын

@@2gioz Hmmm. That would give it a little more of a WRX flavor... Got that Subaru blue already nicely done. Very cool truck man!! But if it were me, I would keep it as is and throw on some 32x11.5" mud tires to go offroad, baja style!

@2gioz

3 жыл бұрын

@@trentp151 many many people have told me so, but not my style 😂 thanks man

awesome truck bro. I have a 1994 standard cab Toyota four-wheel-drive that I’m doing a lot of mods to currently and I’m wanting to add a turbo system next I was hoping you could tell me where you got your turbo manifold from and also how to run the plumbing for the intercooler. Look forward to hearing back from you and thank you very much

@2gioz

Жыл бұрын

The turbo manifold I got with an engine but it was custom made. As for Inter cooler piping I cut a hole on the driver side of the engine bay to run the pipe through and the passenger side I just ran it up between the radiator and engine. I hope this helps and good luck with the build 🤘

Awsome truck i own a 87 22re and an 01 tacoma .....ill never get rid of em

@2gioz

3 жыл бұрын

Got to love them❤️

I love the 22re had one I was going to build but due to the heads not having a good flow rate I changed direction

@Darkdexter123

3 жыл бұрын

After watching this wish I would have stuck with the 22re because tht thing scoots

Dads are the best

Boris rojas 🔥 tuner

Stand-alone or piggy back tuner? I’m running splitsecond pro on my 5vze but the factory ignition timing is too unpredictable. Have MS3pro semi wired up but haven’t had the time to fix the idle air control circuit or install a new bung for the wideband. Those are some impressive numbers for a 22re-t. Great work.

@2gioz

3 жыл бұрын

ThePracticalMechanic stand alone microtech and I greatly appreciate it 🙌

@anonymous1guest

3 жыл бұрын

I just installed a megasquirt in my 22re using the factory "VAST" 4 tooth trigger wheel. Timing accuracy is crap; it jumps around +/- 3 degrees at steady engine speeds and retards up to 7 degrees when revving. I would not use it on a pump gas turbo motor. I am going to run low boost on E85 until I can upgrade trigger setup. If you go standalone, get a 36-1 crank trigger wheel.

@2gioz

3 жыл бұрын

@@anonymous1guest thanks for the tip, I want to change my setup to fuel tech or even haltec

hey brotha this is a rad azz build , hope you still have this ... peace n love brotha keep it rad stay safe and build on ..... l8z fam

@2gioz

Жыл бұрын

I’m never letting this thing go! I appreciate the love, likewise 🙏

@mastercricket7626

Жыл бұрын

@@2gioz good to hear brotha cuz that is awesome, u dont see to many mod the original engine.... l8z fam

Cool💪💪👍👍, what sice turbo you are running?

Buen trabajo.!👍👍🇲🇽

quedo hermosa la pickup

How do you get it to tolerate such high boost? On a side note, how much power did it make before having the turbo installed?

You should make a review on your 22re setup,

Where did you get that bumper? It looks very clean 🔥🔥🔥

@2gioz

3 жыл бұрын

Dalton Ford it’s stock lol thank you🙏

Do you have information on the turbo setup and internal modifications you've done.

Any polymer coatings on the combustion chamber? Also what type of injector nozzle? Nice build!

@2gioz

2 жыл бұрын

No coatings and Injector nozzle? Thank you!

Pretty neat. And no airbags. Stay safe.

@2gioz

3 жыл бұрын

She’s a grocery getter lol not a race truck by all means 🙌

just wow

How much did you spend on the motor and upgrades my man ?

Nice build. Also I need help on my toyota celica st 1984 I won't idle. Thanks for any help

I know this is old man, if you get this comment. I'll be surprised. How did you get e85 to work in your truck. I have a 22re in a 91 yota.. been building for about a year. Piece by piece.

Hey man i have a 94 pickup with the 22re im somewhat knowledgeable about my truck and i want to do something similar for my first build any tips??

Awesome

what is your turbo manifold runner size, like the size of the tube used

Start of the video: *"Hey you, you're finally awake!"*

Was this 22re a turbo from the manufacturer? Or was it an n/a? I have an n/a 22re and i want more power, i was either looking to add a turbo or swap an engine. Whats best?

@2gioz

3 жыл бұрын

It was an NA from factory and the turbo got added to it, honestly I couldn’t tell you which way is better because I’ve never messed with a 22ret before. And honestly if you want just a little more power, I would just buy a cheap eBay kit, that’s what was ran on this truck from the very start and it lasted !

Sick yota hey. I got the 89 pickup

@2gioz

3 жыл бұрын

Thanks

which programmable ecu would be better for daily use they told me about the ems 4 aem but I don't really know

@2gioz

2 жыл бұрын

I have Microtech LT10, the only issue I have is it’s fixed timing. For a daily I recommend a variable timing setup and I heard a lot about the fuel tech ft450. That is the system I want on my truck. I hope this helps!

Can you tell me what the blue light on your dash is for? The red one on my 91 has never lit up.

@2gioz

3 жыл бұрын

On which dash? You’re talking about the microtech 4 lights or the single light on the right side, that single light is for my alarm.

My question is ..... does the 22re motor you have still have stock internals ? ir did yoo actually build the motor ? such as new manifold , new rings pistons , heads etc ...

@2gioz

2 жыл бұрын

Built

What did you do to the engine I’m looking to do this to my 91

Hey I’m thinking of putting a turbo in my 84 celica, what did you do to the internal of the engine?

@2gioz

3 жыл бұрын

Video coming soon

I need to swap this into my '77 toyota chinook lol

@2gioz

3 жыл бұрын

Get it done ✅!

What transmission are you running because stock ones blow up with half that much horsepower easily?

@2gioz

2 жыл бұрын

Stock transmission unopened!

How well would something like this hold up in high 4? 🤔 I have an extra toyota sitting around that I’d love to build for dirt drags

@2gioz

3 жыл бұрын

Honestly I have not launched it in 4x4 but the torque is ridiculous lol, on the dyno it was 950+ torque on 4L !

@whatevermechanics

3 жыл бұрын

@@2gioz holy shit that’s awesome lol

Can I install Turbo system in my 1992 Toyota pickup 2WD Manual? I don't need super fast pickup but I would like to save gas and be more responsive. Is there any step-by-step instructional video on the specific car?

@2gioz

3 жыл бұрын

Honestly there isn’t any videos out there, no one really does what I did to my truck. I have been thinking of finding another pickup and starting over now that I know what not to do lol

What are you doing for braking? Master cylinder? Rear disc? Larger booster?

@2gioz

3 жыл бұрын

Dangerous Fandango I have the bigger master cylinder, and I have a rear disc conversion ready to put on🤙

So I checked your Insta, and see that the turbo is a ballbearing Turbonetics because another guy asked for engine specs and you said to check out your insta, but what are the actual specs of it?

The wheels are nice but can b adding resistance to your speed but great 👍 set up

@2gioz

2 жыл бұрын

That’s a fact 🤔

@wayne-bn9ov

Жыл бұрын

Must b nice to b rich poor man can't do that

Yo keep posting about the lux im think of doing same setup

I have a build right now and need to know what ecu?

The 22re didn't like to keep the headgasket in stock form making 110hp. Good luck. What diff gearing are you running?

@2gioz

3 жыл бұрын

I had to change to a aftermarket head gasket, and currently stock 410 but would like a 373 🤔

@stuwy1237

3 жыл бұрын

@@2gioz You can find older (81) 4x4's or 2wd pickups/4runners with 390 gears. Check the junkyards for axle code G072 or G074 in the door jamb.

@2gioz

3 жыл бұрын

@@stuwy1237 appreciate it man thank you !

what ecu you runnin? wanting to run a small boi not sure what platform works for these motors tuning wise

@2gioz

3 жыл бұрын

I have a MicroTech LT10 currently. Would you like to buy my setup?

Specs on the build details .

Thats crazy dont even want to know the coin invested to make that go from the epic 90hp to 350 thats insane

@2gioz

3 жыл бұрын

Haha 😂 thanks man

Would please put up a parts list ? 355hp is fucking INSANE from a 2.4 now I'm tempted to get a hilux

@joryclark972

8 ай бұрын

I would also love to look through the build list. I'm tearing into my 86 here shortly

If you don’t mind sharing, what did this build cost I mean like engine mods wise

@2gioz

3 жыл бұрын

😅

@miguelrios725

3 жыл бұрын

@@2gioz ?

@2gioz

3 жыл бұрын

@@miguelrios725 I just may do a video talking about everything on the truck soon.

Hey man what turbo kit did you get or did you have to fab everything I would like to do that to my truck as well

@2gioz

Жыл бұрын

Everything is custom fab🤘 I’m glad you like it!

Dude. Who did your interior? And how much It looks slammin'. (Interior of my 94 is pretty clapped out) Thanks.

@2gioz

3 жыл бұрын

Florida custom Cars did my interior, it all depends on how much you want to do, mine was about $1600

@2gioz

3 жыл бұрын

Thanks btw!

Why the steps into the cab???

Hey bro i got 97 taco. And i want to boosted any recommendations?

What is needed to keep up with addimg a turbo in a 22r?

@2gioz

3 жыл бұрын

Oil changes 😂 the turbos tend to burn oil, but it’s all depending on your truck and setup.

What size and type of wheels are you running?

@2gioz

3 жыл бұрын

Reel Therapy they are 20s, moto metal 💪

what are the improvements you have? And how much is it worth?

@2gioz

2 жыл бұрын

Way too much to list, but for the uniqueness IMO it’s well worth it.

How much torque did it make on the dyno, you never mentioned torque

@2gioz

3 жыл бұрын

Check out the recent dyno video, that one has torque specs

Aight so I have a 93 toyota pickup and I wanna be able to upgrade(turbo and all that shit ofc) but I was told to find a more durable transmission and idk a recommendable one as a upgrade and everything on it is stock

@2gioz

2 жыл бұрын

My transmission is the factory W56

I have the same year on truck and I'm wondering where you get your parts

@2gioz

Жыл бұрын

LCEngineering and 22REPerformance are the two main places I get my parts from

You have wheels spacers? For your rims ?

@2gioz

3 жыл бұрын

I do not, they poke out a bit lmao.