Walk around of my new used work truck. Has a built motor and trans nice little 303 cam, truck has the mark 3 conversion interior.. more videos to come on it!!
Жүктеу.....
Пікірлер: 45
@garrisonstatt58382 жыл бұрын
5:38 is music to my ears lol. I hand built this engine. Glad you're enjoying it, if you ever decide to sell it, hit me up! I miss the old girl! You are right, I never did tune the EEC, just adjusted timing and ran stock MAF maps.
@PittbullGarage
2 жыл бұрын
I probably sell it here this summer I need f250 and 4x4
@RBLUS_TY3 жыл бұрын
Sounds good, looks good, and will always be good. Most older trucks are obviously better than some of these new ones out there. I'm tryna get my old 1994 F-150 built. Thought about swapping the old 4.9L I6 for a 6.2L V8 out of an F-250/F-350.
@TheAuthenticQueenBee073 жыл бұрын
Hey P.G.! The vintage pickup trucks last a lot longer than these modern one's out here. Have a blessed rest of January and upcoming February.🙏🏾
@PittbullGarage
3 жыл бұрын
Thank you 🙏🏽 queen bee
@pete538
2 жыл бұрын
Yeah things will Def break but once you dd for a year or two all the issues are worked out. Especially nice with cheap parts. Can't beat a $30 water pump. My 94 302 runs great. The m50dr2 is definitely on its last leg tho. Syncros have been messed up since 150k. Been gentle with the Trans and at 195k and the Trans is still the same. I've been gentle shifting but still reving the hell out of it. Haven't found the recline on it yet cause mine doesn't have a tac.. I've gotten to 45mph in 1st and it didn't hit a Rev limiter. Guessing it doesnt have a Rev limiter with the manual
@TheAuthenticQueenBee07
2 жыл бұрын
@@pete538 *Your giant essay underneath my comment section was Not necessary at all. You can in the future make your own comment section area. I only allow my community to comment underneath my comment section. Do have a nice day!*
@pete538
2 жыл бұрын
@@TheAuthenticQueenBee07 ouch not cool broski
@willsilversurfinharris62393 жыл бұрын
That's Jetta is super clean. Love how u dont discriminate. U reach out to the different car cultures. That's what will set u apart from the rest.
@donovanswanson87933 жыл бұрын
Awesome Truck
@willsilversurfinharris62393 жыл бұрын
Sounds great
@RUBIX33 жыл бұрын
Sounding stout. 💪🏾💪🏾💪🏾
@PittbullGarage
3 жыл бұрын
Thanks bro
@fasterdenu12 жыл бұрын
Like the xpipe sound
@flynnt772 жыл бұрын
My truck had that same loping idle, turned out to be a vacuum leak coupled with a failing idle air solenoid.
@kustominstinct3 жыл бұрын
Nice truck brother 🤙
@PittbullGarage
3 жыл бұрын
Thanks bro
@tomtaphorn78703 жыл бұрын
That's a sweet sleeper. All she needs is a little tlc and you can handle that.
@PittbullGarage
3 жыл бұрын
Thanks.. yes I can’t wait to get her sorted out, be a decent pickup
@willsilversurfinharris62393 жыл бұрын
Yea she pullin
@willsilversurfinharris62393 жыл бұрын
Doing numbers
@pete5382 жыл бұрын
Yeah things will Def break but once you dd for a year or two all the issues are worked out. Especially nice with cheap parts. Can't beat a $30 water pump. My 94 302 runs great. The m50dr2 is definitely on its last leg tho. Syncros have been messed up since 150k. Been gentle with the Trans and at 195k and the Trans is still the same. I've been gentle shifting but still reving the hell out of it. Haven't found the recline on it yet cause mine doesn't have a tac.. I've gotten to 45mph in 1st and it didn't hit a Rev limiter. Guessing it doesnt have a Rev limiter with the manual
@jacobwolf25623 жыл бұрын
awesome man
@PittbullGarage
3 жыл бұрын
Thanks brother 👍🏽
@jacobwolf2562
3 жыл бұрын
@@PittbullGarage your welcome
@landonenmen33712 жыл бұрын
What’s the exhaust set up? Like pipe size and muffler?
@markpezenosky5592 Жыл бұрын
Ain’t a pickup unless there a dent!! It means it’s done ✅ some work in its life
@Rogg33k2 жыл бұрын
Still waiting for the next video on this truck lol
@GrantG5.32 жыл бұрын
What is the 0-60 time
@bobbysmith47832 жыл бұрын
Im putting a simliar set up in my 94 f150 4x4. I have 1.7 rockers on ot but i dont know if stock valve covers will fit, really dont have the extra $ for aftermarket intake manifold. What rockers/ valve covers are on it?
@PittbullGarage
2 жыл бұрын
Rockers are ford racing I have 351 or 5.8 valve covers will work
@willsilversurfinharris62393 жыл бұрын
I thought is was worse when u was explaining it it's not to bad
@frankgonzalez5342 жыл бұрын
Keep me posted
@ronniehunter12 жыл бұрын
Nice truck sounds good but trust me someone lied to you about the cam it’s not a e303 far from it
@garrisonstatt5838
2 жыл бұрын
It absolutely is an E303 cam my friend, I have taken every single bolt out of this engine and put it back in.
@ronniehunter1
2 жыл бұрын
@@garrisonstatt5838 yeah ok
@garrisonstatt5838
2 жыл бұрын
@@ronniehunter1 I've got pictures of engine build from start to finish, if you really care, shoot me your email and I'd be happy to share, I installed E303 cam, port matched GT40P heads machined by Wilhelm Machine, Clevite bearings, Hastings rings, Comp Cams 1.7 roller rockers(which do require taller valve covers), Melling oil pump, etc. No expense was spared and I would have stood to gain nothing about lying about the engine build, as it can easily be verified during disassembly. I take pride in every engine I build and this one was no different.
@ballz6211 Жыл бұрын
Can you get my 95 bronco like this
@PittbullGarage
Жыл бұрын
Definitely!!
@ballz6211
Жыл бұрын
@@PittbullGarage I tried to Google where you were at. You sound like you’re here in Tennessee but Google said Spain lol
Пікірлер: 45
5:38 is music to my ears lol. I hand built this engine. Glad you're enjoying it, if you ever decide to sell it, hit me up! I miss the old girl! You are right, I never did tune the EEC, just adjusted timing and ran stock MAF maps.
@PittbullGarage
2 жыл бұрын
I probably sell it here this summer I need f250 and 4x4
Sounds good, looks good, and will always be good. Most older trucks are obviously better than some of these new ones out there. I'm tryna get my old 1994 F-150 built. Thought about swapping the old 4.9L I6 for a 6.2L V8 out of an F-250/F-350.
Hey P.G.! The vintage pickup trucks last a lot longer than these modern one's out here. Have a blessed rest of January and upcoming February.🙏🏾
@PittbullGarage
3 жыл бұрын
Thank you 🙏🏽 queen bee
@pete538
2 жыл бұрын
Yeah things will Def break but once you dd for a year or two all the issues are worked out. Especially nice with cheap parts. Can't beat a $30 water pump. My 94 302 runs great. The m50dr2 is definitely on its last leg tho. Syncros have been messed up since 150k. Been gentle with the Trans and at 195k and the Trans is still the same. I've been gentle shifting but still reving the hell out of it. Haven't found the recline on it yet cause mine doesn't have a tac.. I've gotten to 45mph in 1st and it didn't hit a Rev limiter. Guessing it doesnt have a Rev limiter with the manual
@TheAuthenticQueenBee07
2 жыл бұрын
@@pete538 *Your giant essay underneath my comment section was Not necessary at all. You can in the future make your own comment section area. I only allow my community to comment underneath my comment section. Do have a nice day!*
@pete538
2 жыл бұрын
@@TheAuthenticQueenBee07 ouch not cool broski
That's Jetta is super clean. Love how u dont discriminate. U reach out to the different car cultures. That's what will set u apart from the rest.
Awesome Truck
Sounds great
Sounding stout. 💪🏾💪🏾💪🏾
@PittbullGarage
3 жыл бұрын
Thanks bro
Like the xpipe sound
My truck had that same loping idle, turned out to be a vacuum leak coupled with a failing idle air solenoid.
Nice truck brother 🤙
@PittbullGarage
3 жыл бұрын
Thanks bro
That's a sweet sleeper. All she needs is a little tlc and you can handle that.
@PittbullGarage
3 жыл бұрын
Thanks.. yes I can’t wait to get her sorted out, be a decent pickup
Yea she pullin
Doing numbers
Yeah things will Def break but once you dd for a year or two all the issues are worked out. Especially nice with cheap parts. Can't beat a $30 water pump. My 94 302 runs great. The m50dr2 is definitely on its last leg tho. Syncros have been messed up since 150k. Been gentle with the Trans and at 195k and the Trans is still the same. I've been gentle shifting but still reving the hell out of it. Haven't found the recline on it yet cause mine doesn't have a tac.. I've gotten to 45mph in 1st and it didn't hit a Rev limiter. Guessing it doesnt have a Rev limiter with the manual
awesome man
@PittbullGarage
3 жыл бұрын
Thanks brother 👍🏽
@jacobwolf2562
3 жыл бұрын
@@PittbullGarage your welcome
What’s the exhaust set up? Like pipe size and muffler?
Ain’t a pickup unless there a dent!! It means it’s done ✅ some work in its life
Still waiting for the next video on this truck lol
What is the 0-60 time
Im putting a simliar set up in my 94 f150 4x4. I have 1.7 rockers on ot but i dont know if stock valve covers will fit, really dont have the extra $ for aftermarket intake manifold. What rockers/ valve covers are on it?
@PittbullGarage
2 жыл бұрын
Rockers are ford racing I have 351 or 5.8 valve covers will work
I thought is was worse when u was explaining it it's not to bad
Keep me posted
Nice truck sounds good but trust me someone lied to you about the cam it’s not a e303 far from it
@garrisonstatt5838
2 жыл бұрын
It absolutely is an E303 cam my friend, I have taken every single bolt out of this engine and put it back in.
@ronniehunter1
2 жыл бұрын
@@garrisonstatt5838 yeah ok
@garrisonstatt5838
2 жыл бұрын
@@ronniehunter1 I've got pictures of engine build from start to finish, if you really care, shoot me your email and I'd be happy to share, I installed E303 cam, port matched GT40P heads machined by Wilhelm Machine, Clevite bearings, Hastings rings, Comp Cams 1.7 roller rockers(which do require taller valve covers), Melling oil pump, etc. No expense was spared and I would have stood to gain nothing about lying about the engine build, as it can easily be verified during disassembly. I take pride in every engine I build and this one was no different.
Can you get my 95 bronco like this
@PittbullGarage
Жыл бұрын
Definitely!!
@ballz6211
Жыл бұрын
@@PittbullGarage I tried to Google where you were at. You sound like you’re here in Tennessee but Google said Spain lol
@PittbullGarage
Жыл бұрын
@@ballz6211 I'm in Missouri Kansas City
What’s your ig?
@PittbullGarage
3 жыл бұрын
Pittbull_garage
What’s your insta?
@PittbullGarage
3 жыл бұрын
Pittbull_garage