Thank you guys for all the great ideas on this video! I hope it helps you buy tools SMART!!! What else do we need in the collection?

@Fedwrench

Жыл бұрын

Flip socket set or 1/2 drive deep impact socket in 19, 21, & 22mm for wheels off/wheels on. I also think the set needs more combination wrenches. The big Husky set skips 13, 14, 16, 17, & 19 mm wrenches. Some of those are needed for drain plugs. Great effort at making the set!!! Merry Christmas!!!

@HumbleMechanic

Жыл бұрын

@@Fedwrench Great suggestions! MERRY CHRISTMAN

@redneck4528

Жыл бұрын

For $67 tractor supply has the 87 piece gear wrench torx and Allen master set I bought a few sets for people I know who work on German junk. For just $30 they have a 40 piece set of gearwrench torx and allen bits still a fine set .

@redneck4528

Жыл бұрын

@@HumbleMechanic check out the hyper tough pry bars at Walmart they are made by Wilde tools in the US. And get yourself a Ford truck so you can tow around those broken German cars.

@300DBenz

Жыл бұрын

A 18.5/ 19.5 millimeter lugnut socket for Ford/Chrysler/GM lug nuts that swell up from rust (even outside the rustbelt). Replace the Harbor Freight die grinder with a Husky (it’s not much more $, and is much, much more durable, i used to go through 4 HF in a year, Husky hasn’t broken in 3 years). A 1/4 torque wrench, newer engines use really low torque specs and a 3/8 inch doesn’t go that low. A “whip” type swivel for the impact gun instead of the 90° swivels you showed (they choke the hell out of the airflow). A mechanics stethoscope (the Lisle is my favorite because I can swap the probe end with a 3 foot long tube (just a piece of pre-flared brake line), which is very handy for locating exhaust leaks.) An extension cord WITH YOUR NAME ON IT! (Never to be loaned to another technician under any circumstances! If you loan your extension cord, it immediately becomes “our extension cord, comrade.”) Air tool oil to keep all the air tools in top condition internally.

The only thing I would recommend adding is a gasket scrapper and a punch and chiesel set.

@richardbates2367

Жыл бұрын

$32 really decent scraper set new handle design gearwrench comfort grip..

@jarednather3541

Жыл бұрын

Flathead screw driver covers all that.

@gm08351

Жыл бұрын

I hate finding videos I actually want to watch. I'm too lazy to pay attention

@homelesszaya.6548

Жыл бұрын

Really good call. And budget ones are reliable. We'll said dude

@dakota5041

Жыл бұрын

That's what my first boss told me to make sure I got, a good scraper, and a good punch set, definitely helps in alot of different scenarios, pry bars to

Bought 200 dollars worth of tools and tool box brand new and worked at a motorcycle dealership for years and did very well. I also worked at a car dealership from the same toolbox for years. Point is you definitely don't need expensive stuff to pursue your career. Work on your craft and talent, don't worry about expensive tools.

@chefbgordon8892

Жыл бұрын

I currently get 50% off snap on tools because of what I’m studying in college not one of my tools are snap on for the price of one ratchet I can get a decent brand full socket set that will work for many years

@JuanPerez-bk9ue

Жыл бұрын

@@chefbgordon8892 exactly, I have had cheap harbor freight ratchets and sockets for years, I did a full engine rebuild, manual swap and suspension work with them. All of them are still working

@CPLBSS88

Жыл бұрын

$200 would be tough in todays money but I 100% agree with your point. It is wayyyy too easy to get caught up with collecting tools and the toxic culture propping up the tool trucks.

@charlbrassell2001

Жыл бұрын

Ya you can barely get wrench sets for that now everything is ridiculous even off brand crap

@cardo1111

Жыл бұрын

Well said.

As a young man who doesn't have a dad or guidance this Really helps point me in the right direction. Thank you for your time & Knowledge Humble Mechanic. Keep it up

@HumbleMechanic

Жыл бұрын

I’m so sorry you don’t have a dad around! I’m happy I can help ya

A couple really good tips I found in buying tools: - Japanese tools from Koken, Engineer, Nepros, Vessel, etc are as good and often times even better than their snap on equivalents and priced fairly. Typically a Japanese tool is a third to a tenth of the price of its Snap On equivalent. Warranty claims can be hit or miss, but Koken does have a facility in Massachusetts and they handle replacements. That said, I haven't needed any replacements for any of my Japanese tools. - Gearwrench punches way above their price range in terms of quality. Their ratcheting tools are top notch and Home Depot will typically replace the tool under lifetime warranty even if you didn't buy it from them. - Pawn shops are full of old American made tools and they'll typically negotiate way below their listed prices since they take in such a high volume of old tools. I put together an old Craftsman socket set and paid 5 bucks for a 12 socket set that I use almost daily.

@SusiesRepeat

Жыл бұрын

Japanese tools are so under rated and compared to Snap On are as good if not better and so much cheaper.

@ConcussedGaming

Жыл бұрын

I'm glad there's more people that appreciate Japanese products! Such a great culture and I'd rather buy Japanese then this rebranded Chinese steel SHIT coming from here in "America" and IM AMERICAN!

@kylerdecoopman1106

Жыл бұрын

doing the lords work

@eriklarsson3188

Жыл бұрын

Leave it to the Germans.

@AdHocAtom

8 ай бұрын

And let's not forget Tsunoda!

Thanks Charles for doing this! Helping others is what it's about! Merry Christmas

@jirka87

Жыл бұрын

I really want your book,but in PDF Sir, because of "field needs", where is really not comfortable and respectful to handle a book with oily hands :-( But as far as I know, I can not buy that :( And Iam from Europe, so Iam basically screwed anyway :(

@mariogiron6120

Жыл бұрын

Brother give glory to Him who deserves it. Jesus Christ. We help others not because it makes us or others feel good but because we honor our Father in heaven when we do this. We do good to others only because we as fellow believers in Christ are empowered to do so by His Spirit. Love you and pray for you frequently. You’ve been a tremendous blessing on me and my family! God bless you brother

@TheMasterHackUS

Жыл бұрын

You are the man Paul! We need more people like you and Charles in this business

@areid1440

Жыл бұрын

TEACHA!!!

@pringledudetube6006

Жыл бұрын

Awesome seeing you in the video! So cool seeing my best teacher on KZread! Merry Xmas and new year Danner!

I'm a DIYer and am still learning. Since I didn't really have someone to ask how to do things, I tended to break stuff... like bolts, or round off nuts trying to get them off. Maybe this isn't an issue for young technician but I would think the set would need a set of extractors. Also, I have a small propane torch I use all the time. Again, maybe shops provide real torches so it's not needed but I certainly benefited a lot once I got it. I actually wish I had seen something like this video 5 years ago when I started my adventures.

@jeffmiller4168

Жыл бұрын

Agreed 100%. I’m a new-ish dealership tech, and even though I think that extractors (and drill bits for that matter) can be very dangerous in inexperienced hands, they are necessary at times. Gotta be able to make holes, gotta be able to remove the bolts that “the last guy” messed up.

@inliner3114

Жыл бұрын

I just DIY but I have a whole drawer (or maybe two) full of extractors, bolt outs, drill bits, etc. Once a car reaches a certain age in the rust belt, I'm almost reaching for extractors or bolt outs more than regular sockets.

@joshkiej6601

Жыл бұрын

what might be good advice for you is that you should hit stuff with a hammer. I work on semi's and in 99% of the cases where i can't get a bolt loose, i just smack it with my hammer hard 5-10 times and it'll come out no problem. Way quicker than heating stuff up and you won't be getting burnt while trying to get that bolt out

@kebrownnov2993

Жыл бұрын

@@joshkiej6601 depending on what you're morning on that may or may mot work, especially if it has been heat cycled a million and one times

@joshkiej6601

Жыл бұрын

@@kebrownnov2993 i'm the go to guy in our shop to get bolts loose, and in over 90% of cases it will work. Sometimes you do have to apply heat/freeze it to get it loose though

I lost all my tools in a house fire 2-18-2022. I will say that it’s no fun buying all the tool’s again. Remembering when I first bought them and how excited I was doesn’t happen twice. It warms my heart to see someone who is helping other out. Sure it’s not the same, but it is in many ways. I know whoever ends up with this will definitely be stoked! Thanks for helping out the future, and keep up the great work. New subscriber here and love the channel

@burkeyjmoney

10 ай бұрын

Sorry man that sucks

@hoesssaaayyymyname5734

9 ай бұрын

Dayyum man that sucks I hope you bounce back

@bk9609

6 ай бұрын

*adds extinguisher to cart*

@DarrellBraunsLongThumbNail

3 ай бұрын

I had the same experience. I had so much stuff. I just replace them as needed and eventually I'll have way too many tools again, lol.

Thanks Charles, I’m only 15 years old but have started wrenching on cars. I’m a little underage of course but I do most of it at home. Cars and off-roading. I have been taking you videos into recommendation. Building my setup at home next to my mothers. Keep up the great work.

@Toolsareus

3 ай бұрын

No way me to man!

I remember when i first started wrenching at a motorcycle dealership i walked in with one small briefcase looking tool set and 1 breaker bar. Now 3 years later I have a good tool box with about x5 the tools i started with and no snap on debt LOL

This is so cool, we have just hired a second apprentice and although we’ve already begun assembling a tool kit, this video will be a great reference. I’ve been eyeing these boxes every time I walk through Home Depot. Thanks for this Charles!

@HumbleMechanic

Жыл бұрын

Thanks Scott! I really appreciate all the work you do for the industry

@redneck4528

Жыл бұрын

The Husky box sets are God awful, I had to help a friend pull an engine at a u pull. The ratchets are awful the sockets are loose for $100 more the gearwrench sets are miles ahead even the $100 set from hart at Walmart is better. For a beginner I'd buy straight metric shorts and deeps from tekton, Milwaukee or HF Milwaukee has a set of impacts on Christmas special for 99 at HD plus they are thinner walled like snapon so you can get into tight wells and against frames Full set of combo wrenches 8-at least 24 Milwaukee has a nice set no skips but HF also has some decent sets the Husky are too thick for some spots. Then $67 buys you the 84 pc gearwrench torx, e torx and allen set at tractor supply. The pry bars at Walmart under hyper tough are usa made Wilde tools At HD they have an adjustable pry bar made by crescent that works great on cv axles But the bulk of what carl talks about in the video is good stuff

@jonathonlacey3833

Жыл бұрын

@@redneck4528’ve had the exact same husky set for over 7 years working on cars and 4 years working on Audi specifically and never had a problem with them. Never once needed any other brand including snap on or the likes.

@redneck4528

Жыл бұрын

@@jonathonlacey3833 maybe they changed, the wobble in the ratchets and looseness in the sockets in this years set was atrocious. The Husky sets I've used before were Stanley level quality which is ok. Something changed.

@scientist100

Жыл бұрын

@@jonathonlacey3833 what do you mean? The 20k snap on toolboxes fix things for you; they aren't just roll boxes that store tools...

I’ve previously spent over 7 years working on cars and I’ve been an industrial maintenance mechanic (millwright) for 3 years and realistically I’ve collected every tool I’ll ever need yet Im obsessed with watching these apprentice tool box builds. Keep ‘em coming 🤙

I've worked as a mechanic for close to 10 years. Great video! A couple things I'd recommend for newer technicians is to look at used tools when starting out to save money. Something I think that is very important is using 6 point sockets. I work in an area where rust is prone and 12 point sockets/ wrenches can easily round fasteners.

Missing pop rivet set, drill bits, thread tools, brake line flare tool, propane torch, gas solder iron, heat gun, wire crimper and ends, shrink tubing set, O-ring set, spindle hammer, serpentine pulley wrench, impact (hammer) driver, battery charger with desulfating function and engine start, vacuum puller, valve spring compressor, tire plug kit, brake spring expander pliers, seger-ring pliers, grease gun, brake fluid pumper, feeler gauges, spark plug gap setter, coolant weight and battery acid reader, mechanics stethoscope, files and reamers, gasket scraper, punches, wiper arm pullers, general pullers, fuse tester.

We used to own 2 collision shops, I came up with the same idea a few years for new techs in training. We would front the cost and if the tech stayed with us for a certain amount of time it was theirs to keep. It ended up working out great!

I’m an electrician, this is a good set for a young mechanic. It’s good to see some of the seniors helping out the younger guys. I have used the General roller box before and loved it. I’m a DIY mechanic for my own vehicles and like some of the things your showing especially the scan tool I have never used anything but a basic OBDII scan tool.

@kebrownnov2993

Жыл бұрын

Nowadays you need to be able to do special functions and program when needed. Nowadays you need to be able to read TPMS sensors, 02 sensors, get Data for coolant temp, what the thermostat is doing, MAF, EGR, there's a lot more to it besides just reading and clearing codes, that's what separates a mechanic and a technician.

@Shredxcam22

Жыл бұрын

@@kebrownnov2993 yes and no. Tech at a dealer with high end scan tool couldnt diagnose an o2 sensor on my van. If he knew how to use an oscilloscope he would of found it as well. Programming functions tho, your hands are tied.

@kebrownnov2993

Жыл бұрын

@@Shredxcam22 obviously he needs training on his scan tool

@Shredxcam22

Жыл бұрын

@@kebrownnov2993 2 different dealers worked on it. One changed a cat. One said it was software. Both were wrong.

@Shredxcam22

Жыл бұрын

That being said , I wouldn't wish being an auto mechanic on my worst enemies. Lowest paid and worse conditions. I would never and have never worked a job that would ask me to buy my own tools for work.

Thank you for doing this, humblemechanic. As an instructor, I appreciate a seasoned tech looking out for the next generation. We need more of this in the industry. That is an incredible start up kit that will allow a young mechanic a successful start. I hope the young person to receive this box will pay it forward in the future. I have only recently come across your channel and you have a new follower.

@HumbleMechanic

Жыл бұрын

Thank you so much

Knipex "Pliers Wrench" are a mandatory addition to every aviation mechanic. Auto mechanics should use them too!

@davida871

4 ай бұрын

Vanpliers are also great to have.

The M12 3/8 ratchet is what got me on the M12 platform. My big stuff is all Dewalt.

Keep an eye out on the 308 piece craftsman set. It goes on sale at ace hardware/lowes for 199-249 and it all comes in plastic trays meant for a toolbox. The sockets come with some of the bigger sizes (up to 24mm and 22m in 3/8) its one of the best starter sets in my opinion for the pricepoint if you can snag it on sale

The only thing I can think of to add right now is snap ring pliers. They aren't needed often, but when they are, they are great! Oh, and a spark plug gapper, and feeler gauge set. Everything else is awesome. I'm not an apprentice, but i do tend to do a lot of work on my own vehicles, be it 2 wheels or 4. My buddy, however, has been a diesel mechanic for going on 20 years, and he has helped me out a lot. There were things I was going to suggest, like the $15 light, then you happen to mention it. It's be a great drop light, and got a ton of use when rebuilding my front end. You are also correct about having the right tool, vs something that will work. I had to modify a 4 pin spindle nut socket into a 2 pin because no one in town had the one I needed, and ordering it would take too long. Also, no one had the correct size socket to take of the nut for my bottom ball joint. I had to buy the biggest channellock type pliers I could to get the best grip on that nut. It was a PITA, but worked. Having the right socket would have saved alot of time.

Multimeters are definitely key for any kind of troubleshooting. If you can see voltage and continuity with it, you're golden.

a tool i think is a must have for a new tech is hose pliars, the $15, 3 piece set from Harbor Freight are great, (Long Reach Hose Grip Pliers),they help out a ton, there are nicer ones on the market, but for $15 they cant be beat for a beginner. mine get used almost daily.

Just started building my kit got hired as a diesel tech for GSE maintenance at an airport this video has really helped me out to see what I need and price points although I made a goof my first week and bought a SNAPON air impact for $650 off the truck but this video has helped me learn my lesson

As a guy just starting to get into cars and going for A&P certification I can’t thank you enough for this awesome set

Great video Charles! Thanks for all you’re doing for the automotive industry 👊🏻

I absolutely love this and the $1500 tool set up! I showed my coworker who is a lead technician this tonight since I am in school to become a mechanic. He told me he 100% agreed that these are great and loved the idea! So now I am starting a list for myself so I know what I can get to start off my tool box ❤️

This is what I like to see especially in this industry. I went back to doing diesel a year ago and started a new box just about everything came from harbor freight and still does. I still pull and rebuild engines just fine. Thank you for what your doing and showing.

Great calls on the caliper and trim kits. I've used both for my independent stuff a ton and they have made me way more money than I have ever paid for them. The other nice thing about that caliper kit that rules is you can put the flat face on it and use it to press in standard pistons as well.

I’m so pumped on this kind of thing. It’s so awesome to give back and help someone start out.

Just started out in my first dealer tech job at 18 at a Hyundai dealer. This is so helpful not only showing what kind of tools might be useful for me to buy and build slowly. Thanks Charles. This helped so much.

That's a very nice beginner set and whoever ends up with it will be off to a great start. One thing I'd recommend (I'm sure everyone watching this video will have an opinion on 'just one more thing') would be the Gearwrench 3680 serpentine belt tool set. It's a great value at $60 and has applications far beyond just serp belts. Also 100% agree on the Allen wrenches. Nearly always prefer a bit socket. Also don't need a fancy multimeter, just something basic or even just a 12v test light at first.

@Jojo69869

5 ай бұрын

The Bilitools B1B99251 looks to be the identical set for $43

That snap on comment about paying things off forever is so true. I bought a bag of beef jerky and a Snap- On hat that I’m still paying off. It’s been 3 years already.

I’ve always had a bag/small box but now with my new job I need an actual box and this is a really good start. Thanks!

Bro I’m 3 months into my tech career, and I walked in with 500$ worth of the very basics and I’ve already built up a 9k+ debt with tool trucks to have everything that I need and some little stuff from HF. This is awesome and is definitely a great place for someone to start their career with.

I would recommend adding a stethoscope, I have found them useful for pinpointing the location of various sounds. Great video and list of tools for starting out!

@travisvanalst4698

7 ай бұрын

Not for a beginner box.

Just wanted to say I have an older version of the 290 piece husky toolbox that I got for Christmas in 2021 and as I am a beginner level tech it has helped me so much throughout my journey so far and the only complaint is with the older version the 2 drawers on it were not locked in place so they would slide out constantly which I see they added a sort of lock to it with the newer versions so I would highly recommend getting the tool set as a beginner tech the tools are good quality for the price you pay.

I am getting back into the mechanic field after doing shadetree stuff while in the Army for 13 years, when I left the Army, I went a different route, and now 9 years later I'm throwing wrenches again- you videos helped me rebuild my tool box and still going. i need to build 2 boxes, one for work( cause I can never find what I need when I need it), and one for home for all my boxes of tools

Thank you, Charles! We appreciate your continued support of TechForce. Jeffery, the recipient of this toolbox was thrilled about your donation.

You sir are a class act. If I had you as a mentor as a 20 somethin I may have stayed in the auto tech field. I have zero regrets on the route I ended up taking but I LOVE the idea of what you are doing. KUDOS!

@tylerreiter5726

Жыл бұрын

I had an awesome mentor too and he’s still someone I consider a friend but bad employers pushed me away from the field, I love construction though, plus I got to buy different tools and that’s always good

I think you have fantastic ideas on tools. I have to give a nod to the M12 tools. 1) Size, they're perfect for 90% of every fastener and get in small spaces and less fatigue. 2) Electric is portable. Meaning in car. Travels in a bag. Outside work. Friends car on side of road. Air tools are going the way of the Dodo with rare exception. Necessity for smart work, not just cordless. Pry tools for trim and hose clamps, insanely useful for quality of work/not breaking things. Bits... Never enough sockets or bit adapters, universal joints, shallow etc. Same as small ratchets for spark plug nightmares. LED lights, one of the greatest improvements with magnetic mounts. 1/2" tools for serious work. And ratcheting wrenches, can't have too many. Esp Swivel head.

This is a pretty awesome jump start for anyone! Great job putting it together.

Great video! things I would’ve also liked to see as a 4 year tech: power probe, for only 100-140$, and pairing one with a multi meter is super handy to speed up diag. Would have also liked to see a pipe wrench. Would have also like to have seen small cheap kits such as plastic clips, heat shrink, o rings. Also some expendables, like dielectric grease and anti seize, especially if you’re in the rust belt. All the places I’ve been have shop scan tools, depending on that it would be worth it IMO to use that 500$ for other stuff.

Very logical choices on the types of tools. You missed a folding utility knife. The Husky ones are good. A 3 pack is $15 and could be split between boxes. Wire brush to clean things off, hand and drill type. On Amazon, I got an ABN Magnetic Swivel Spark Plug Socket Set, 5pc for $46, but DIY could just get the one they need for the cars they own. If they have shop air or compressor, then a $25 Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit might also be on the list. The DIY guy would also need a vice and maybe think about a spring compressor for struts, but I know that blows up the budget. I am looking forward to the scanner review. Dose it do a full auto scan and give you a list of errors without having to check each sub module one at a time? Can you also ask them about the cost on updates and what happens if you miss a few over time?

@Ratkill9000

Жыл бұрын

Tough call for spark plug sockets. Ford used 9/16 plugs for a good while, but in recent year went to a traditional size. It's not too uncommon to work on older Fords so getting a complete set of plug sockets would probably do a new guy well.

Been enjoying Charles' videos for years. It's so nice to see such a brilliant mechanic share his experience and support apprentices and young people starting out in the trade. Top bloke.

I’m starting off as a technician I wasn’t sure where I wanted my life to go but being a car enthusiast led me to your channel and I have to say I’ve made the greatest decision of my life and am having so much fun I’m glad your looking out for the new guys like myself and I honestly can’t wait start professionally 😁😁

I’m an apprentice Diesel tech, I have that husky mechanics set. And I have definitely put those sockets and ratchets through their paces. The only thing that was unfortunate was the combination wrenches, it skipped around on sizes. But other than that, that kit is pretty good for budget.

@ScottyP04

Жыл бұрын

I'm a beginner level auto tech and I have an older version of the set where the drawers didn't lock in place but the set hasn't let me down besides the occasional drawer falling out.

Hey Charles Merry Christmas and I hope you eventually see this man. I was on the fence last year on whether or not to pursue a career change and become a mechanic full time. You put out that video last year and the bit at the end of it talking about the demand for techs in the industry really influenced me in pulling the trigger to do so. Almost a full year into the job now and I feel 1000% happier and fulfilled in life. Thank you so much for the amazing content and positive energy you put out for the Vw/Audi and car community at large 💪. Keep up the good work! Cheers!

@JOODCars

Жыл бұрын

That’s awesome man good for you!

@erik34

Жыл бұрын

That's awesome, Francis. 👍

Love to see a professional mechanic with a real talk. Hey we all start on what we can afford and gradually we step up 💪🏽

I love waching your videos and they show me a ton of new stuff I am 15 and have been shown the love for fixing what people say has been gone and not this one channel but the number of people doing everything from how to videos and tool review I am working on building my toolbox and thew family members and videos like this. they just keep me extremely interested and i just want to say thank you.

When it comes to some tools like wrenches on ebay you can get snap on tools for fairly cheap, not as cheap as some other places but it still makes a huge difference

@HumbleMechanic

Жыл бұрын

I agree. Ive bought a good amount on eBay.

@inliner3114

Жыл бұрын

Buying used tools in general will save a ton of money. People get sets as gifts then never use them or they buy a bunch of tools thinking they like to wrench then find they don't have time or it's too much trouble. I buy tools when they are on sale or when I find them used if I can. I only buy new at full price when I hit a roadblock and need a very specific tool.

@widebody_moparmike

Жыл бұрын

Amazon is the cheap tools shopping , gear wrench sets and watch places like tractor supply around the holidays and home depot

Great video as always. I've always recommeded a set of protective lug nut sockets for new techs. I have multiple sets from koken for the extended length but any set generally gets the job done.

@jeffmiller4168

Жыл бұрын

Yes!!! A cheaper set of nylon sleeve sockets save a lot of headache and wheels

I’m so excited to get started. Thank you. Sadly I’m still in school but can wait to just be done. Thank you for filling me in on what tools I really need to upgrade

Loved your technician cart video, came across it a few months ago in my recommendations. I'm not a car guy but we are buying our first home this week and my wife just got me that same cart for Christmas. Can't wait to start filling it out with some of the things from that video and this one to get my home DIY stuff up and running and for basic simple repairs on my car. Keep on keeping on man because you put out some amazing content and I love the way you explain things.

100% agree about the Multimeter, I have a couple nice ones, yet I always grab my cheap old Craftsman one. Also totally agree with you about the Allen wrenches in those tool sets. Maybe add some sort of spline sockets. Or some other socket for rounds over fasteners. Also a pinless universal set would be a good addition.

@redneck4528

Жыл бұрын

Especially the Allen wrenches in that set, they literally give you two of the same sets

@pkt1213

Жыл бұрын

As long as it is a digital one. 🤣

@focusedzx3

Жыл бұрын

i personally hate allen wrenches i will grab an allen socket for my ratchet over a allen key

I would add a test lamp as well as the multi-meter - you'll probably grab it first for a quick go/no-go check - you can also make one yourself for a cheap-as-chips option and it would still be useful (I prefer my self-made test lamp - you can select the wattage of the bulb you use - you can decide how long the leads should be and what clips/probes to put on the end etc. Great vid and advice - thanks Charles

@SirClip201

Жыл бұрын

I'd file this in the same category as the adjustable stuff. A New tech needs a firm grasp on the multimeter before using a test light. Just because it lights up doesn't mean it's good.

Craftsman has this handle ratchet tool. You twist the handle and it does the job. Great tool for tight spots and was $35.

Gasket scraper. Blow torch basic setup. Bolt extractor set from icon.

The only thing I wish I would have got early in my career is a battery jump box. Seems like you're always walking out to a vehicle just to walk back in and borrow someone else pack. Really excited to see how that scan tool works. Thats one thing in 4 years I have yet to buy, always seeing the price and just deciding to use the dealer provided one for now.

I second the husky box, I have the 72" wide version (which is full) it is good product. i salivate over the bix boxes but i'd rather have the tools then the box. A general technician box is hard since manufacturers like using different fasteners. my 2 Cents would be full set of torx, allen, and security version of them, plus etorx and triple square sockets. These are becoming pretty common across brands

I love that this guy is helping other people to get started with tools. That's the way to get people to work and it helps us all. Hopefully, it creates a culture of cooperation and more people do the same. Pretty cool. I am trying to learn to work on my car so I can take it to the track. No one taught me or gave me anything. I'm grateful for these videos bc it is my best source of knowledge.

I'm wanting to get back into wrenching for a living. I've been away from it for about 3 years now and have missed it since! This was a great video to help me get some more tools I need to get back into it! Thanks Charles! I've sent an app in to a local dealership, wish me luck!

I am not a mechanic. I had my mid-life crisis career change from LE to T&D machinist, mould maker, welder and I am astounded as to the overlap for the tools I see in the engineering and mechanical trades. It also allows me to think outside the box seeing what others in other trades use. (Ridgid has a lifetime service agreement which is not the same as a lifetime guarantee-- store to store they will make it difficult for you to be whole if you have a problem-- buy once, cry once) Tekton is a USA company that makes a lot of its tools in Taiwan and a growing catalog of USA made SKUs. They are great, and are worth the slight premium. Perhaps, you might have missed basic metrology tools. Vernier calipers, dial indicators and a magnetic base can be had for not a lot of money. I would add a full punch set, centre, pin punches, or even perhaps roll pin punches if that work is foreseeable. Cheers!

Nice to see someone passionate about his industry trying to make if better for the people coming after him !

This is an awesome thing you are doing to help out starting techs!

Charles.....you are awesome. Please keep up the good work. I enjoy watching and learning from your videos. Please keep doing what you do.

I’ve been a technician for a couple years and now I’m going to a shop where they offer ASE courses through the years of employment and this is a great reference for what they expect in tools for the job. Thanks for the video! This will help add to the list

I can’t say this enough,this is a great video! I’m a DIY car guy and thanks to this video it made me realized what tools I have and what I didn’t have. This video encouraged me to buy Milwaukee combo kit (impact driver/drill) which I got free 50 bit kit and a free 3/8 ratchet . Definitely a game changer for me for $250 out the door

As someone in college I appreciate videos like this to help guide me for my own tools as I slowly buy before graduating next year

Thank You Charles!! Your videos always helps me to work on my Jetta 🖤

I’ve been doing the same, I’m a boat tech 3+ years in. I bought pretty much all of my beginner tools at harbor freight and I’ve been slowly upgrading and adding over the last couple years

I'm happy to learn from this video and I'm looking forward to seeing all of them and learning new things from it.

Great job! Love to see my favorite channels giving back!

FLEX HEAD ratcheting wrenches. Got a set off Amazon. Changed my life

Great video. Thanks for doing this!

Good video, I started with a Matco cart back in 2005 and worked my way up to a Snap On box and mostly SnapOn and Matco tools after a few years.

This is awesome to see. I’ve been offered a job as a mechanic and I’ve really been wondering what to get and all but really afraid of pulling the trigger cause tools are obviously expensive and it’s new. But working on cars is my passion. I am a diy’er and have been doing it for 8 years now. Would really love a start. This is great info.

Thanks again for your tips. I would love to see a review of YOUR tool setup. It looks organized and extensive.

What a thoughtful video I had no idea a ball joint tool existed like that hitting knuckle or what ever works but what a awesome tool

You rock dude - thanks for a good vid and all the other things you're doing!

I really enjoyed this video (as I do all of your videos). It has some really great advice and super entertaining!

Your videos make my day better. Always good content

As a mechanic my self, just starting out like 4 months in, I can confirm that all these tools and the box I own un ironically. For all my other younger mechanics out there I definitely recommend this setup, it works for me and I’ll be able too use those tools once I get better replacements at my own house and save money on a box at my house

Great video! the young apprentice would be very wise to listen to (and heed) your recommendations

Always loved lock-a-socket trays. Still the only socket organizers I use to this day

The Husky box is the nicest set keep up the tool show, thank you.

Been using that husky box at the end for a couple years and it’s held up very very well, would suggest 100%. I’ve got Matco, snap on, Mac and other professional grade tools and still tend to grab the ratchets out of that set.

Great stuff Charles and great advice, Merry Christmas to You and the Family, Thank You🙏👍🙂🎅🌲

Thank you so much for the videos My son is in his first year of tech school ( he graduates may 2025) I have been saving $ to help him with school and build his tool box but your videos are a lot of help and Paul lending his support was fantastic Thanks again your videos are so much help 😊

Sweet tip for that swivel bit for the air tools. Def gotta get me one of those. The hose is a pain in the ass especially in tight engine spaces

I made the same mistake when I was a young mechanic got in the snap on truck, got in over my head. Thanks for educating all the younger dudes out there!

Awesome job Charles!

the carts and box are really cool, as someone fortunate enough to not spend a fortune on the snap on truck its great to have someone with experience set up a box for a new person. i remember my dad fixing our cars and he was an ase master tech, so when i said i wanted to be a mechanic too he gave me his boxes and mass collection of tool truck tools. that said i still use the cheap tools cuz even with the most expensive tool if you dont know what youre doing the tool price wont change it.

This is a great video cause I need this I am going to be a diesel technician and I’m going to need my own tool box soon so I needed this !

I probably started with less than $100 of tools 45 years ago, and added gradually as needed. I'm probably $1500~2000 into it now, and I what I really need is a Milwauke power ratchet

Thank you for these videos. I am not a mechanic but my son is going to school to become one. I am using these videos to learn what I need to buy him so I can help him start out.

Just watching this and added a few things to my list, as someone starting out Jesus it was tough choosing tools and a box without anyone giving you advice 😅 wish I’d seen this 2 years ago, with that said I’ve added a few bits from this to my list and I’m getting there 👍🏼

I used to be a workshop tech and now I do roadside breakdown so I know a thing or 2 about keeping tool count low and making things work, things I’d add to this are a wire brush for wheel hubs etc, a gasket scraper a small punch set. Drill bits and extractors can be borrowed from other techs as they’re not an everyday item but when I was an apprentice I did lots of servicing, oil pans and water pumps needing scrapers and the punch set is pretty essential if you ask me

Thanks for doing this again. Loved the first one

Even tho I have no need to assemble or biy more tools I alwas lije to watch those as there's always some random bits that are useful, like that plastic trim kit. Thx for upload and Merry Christmas!