If you liked this video, subscribe now! ;)

@mpangelu

2 жыл бұрын

to the channel or your bundles. ..................................Trick question, the answer to both is yes.

@RPRsChannel

2 жыл бұрын

*_Past collections, they are no longer available, or?_* *_To me, it looks like it's only available for 1 month and then not available any more? I see nothing on your site to not indicate that is how it works._*

@mpangelu

2 жыл бұрын

@@RPRsChannel You can purchase old months, though it isn't at the same rate as when they come out. If you have an active subscription it is $30 for most months. If not I believe it is $60 (usd for the currencies)

@mpangelu

2 жыл бұрын

@@RPRsChannel The reason I said most months is the valhalla sets were a different value.

@thattabletopguy

Жыл бұрын

Aye aye, Captain!

Wow. All I can say really. Loot artists/sculptors are just incredibly talented.

Wonder if any will make the Harpy in 75mm scale lol 😉 that would be massive! Top notch job loot, can't even begin to imagine how long it took you all to make it!

@LootStudios

2 жыл бұрын

That 75 mm we'll leave to one of you guys 😅 It took a while but we really love every minute of putting the whole ship together!

I just got into resin printing and subbed to loot. Now I have to find a way to fund my new resin addiction. 🤣 Thanks for your hard work and great files to print.

@opshlds

2 жыл бұрын

The funding problems are real with quality prints such as these!

Love the ship. its the reason I have to upgrade my printing skill. great work on the model and fantastic painting. I'm thinking 75mm so I can sail it myself..

New to the world of minis and painting. This is by far one of the coolest things I've ever seen.

incrível, parabéns pelo trabalho

é a peça mais épica que ja vi em toda a minha vida.

Love videos like this would love to see painting of compass and I hope the next month has props it’s a huge selling point for me

Awesome project! Congratulations! 😱👏👏👏

Also would love to see some I. Depth painting tutorials that would be cool I know you brush over them in the videos (no pun intended) but I would love in depth look at the painting and skills

This ship is why I subscribed.

Wonderful work by the LOOT team! I now need to make this a priority myself. :)

this is wonderful !

Very ambitious project, great job

You guys had me at the pirate boat that's what made me finally join can't wait to print this baddie

@diego2112gaming

2 жыл бұрын

This is the set I pulled the trigger on as well. They had this on the Fantasy side, and a sci-fi inspired by Dune, yeah, there was no way I wasn't walking away with those.

fantastic work . Is it possible to make a tutorial video of how you painted the ship that would be great>?

great ship

Welp, need to make this happen for our D20 Tabletop Cruise, it's just too cool. Nice work Loot! Do you guys have any Spelljammer type air (space?) ships? We are likely going to have the Spelljammer Adventure League season live by our sailing and would love to do something special for that with a large spelljammer ship showcase in the conference center aboard the cruise ship :)

@dragonkinfolk

Жыл бұрын

The one that just came out for Sept has what could be used as spelljammer ships. IMO

🤯

Beautiful work, need to be able to print this on an Elegoo Mars 2 please! :)

@LootStudios

2 жыл бұрын

You can already do it! Just download all the parts on our site ;)

@richardpezall384

2 жыл бұрын

@@LootStudios Cool did not realize the smaller version was available yet. Thank you! :)

Any chance you guys could partner with 'Sea of Thieves'? These are amazing.

beautiful

@rodneygaul2227

2 жыл бұрын

a very nice Pirates of the Caribbean feel . I'd love to see your group tackle Battlefleet Gothic boarding action

🤩🤩🤩

What filler did you use for the joining's? Can't wait to get mine, it's a birthday present from my brother in law and his wife

How much resin does this take to print?

@anthonyedwards3349

2 жыл бұрын

About 3-4 gallons

@anthonyedwards3349

2 жыл бұрын

Took me about 5-8 rolls of filament with room for errors

@brotherbing405

2 жыл бұрын

i wacked it all in lychee and it came back with around 3 bottles (1kg bottles )

@Ughahaven

2 жыл бұрын

All of it?

@gettingpolitical

8 ай бұрын

Yea I hit 4 bottles, but I added other prints (outside of the ship) to my build plate because I don't like missing an opportunity to get others done, if you can squeeze em in, do it lol.

We need the Goonies!

What glue did you use for the seams between layer parts?

Hi, on your paint list you don mention the brand for the "sand" and "golden brown". It also looks like several other paints are missing. Can you help me please? I love the color of the deck in particular!

Gorgeous model and one day i will print and assemble it. Should ALL be done with Resin or is it worth printing the larger pieces with a standard 3d printer?

@LootStudios

Жыл бұрын

We print with resin only. But some members use FDM for the larger pieces.

for the standard size do you know how much resin this will take to 3D print?

Big! Can it be printed on a regular sized elegoo?

@LootStudios

2 жыл бұрын

Yes! You can download all the parts and assemble (:

@thegamethemovie9605

2 жыл бұрын

@@LootStudios Nice! Thank you.

@thedoctoriam

2 жыл бұрын

Can it print on a fdm printer?

@EjDantes

2 жыл бұрын

@@thedoctoriam Yes, they have an FDM file version too.

Can everything be printed using a small printer or do some parts require a large printer?

How much resin did this take to make including the supports?

@dragonkinfolk

Жыл бұрын

I think in my printer I must have used 5kg of resin at least. I lost track of the bottles

How much resin kg?

Wish I got started earlier is there a bundle to get all older loot versions?

@LootStudios

2 жыл бұрын

Hey Anthony! After subcribing, you can purchase our older bundles for 30$ each accessing the tab "Old Loots".

@anthonyedwards3349

2 жыл бұрын

@@LootStudios but I mean like a bundle to get All the models maybe make em $20 each one but you have to buy all the ones you don’t have idk I have bought a few older ones as well but like I said it would be nicer to have a huge late bundle

Does the fdm version require supports?

What were they using to fill the gaps in the model?

@rufusprofessionalservicesl7248

2 жыл бұрын

The resin

What size resin printer is needed for the largest parts?

@LootStudios

2 жыл бұрын

The versions we have available of the ship are: -Smaller format resin printer version (Cut and supported. If your printer has a print area of 134 × 75 × 130 mm or larger you will also be good to go) -Big resin printer version (supported version for printers with a printing area of 192 x 120 x 200 mm or larger) -UNCUT version (no cuts to fit a print bed but still separate decks) -FDM version (Unsupported)

I've only got a little Elegoo Mars; this thing both excites and intimidates me :D It's sooo beautiful, but just the base alone is a job for the whole weekend

@LootStudios

2 жыл бұрын

Hi! We've provided a version with more cuts for smaller printers

@SilentSooYun

2 жыл бұрын

@@LootStudios Which I certainly appreciate! It's the time involved, though, that is most intimidating: I spent an evening plating up the various (pre-supported, THANK YOU!!) cuts, combining where I could, and still ended up with around 90 plates. At 6-7 hours per plate, that's almost 30 days of non-stop printing! This is not a complaint, mind, I'm just saying that printing and building this amazing ship on my single, little old Mars is going to be a very challenging, long-term project :)

@gertondesk

Жыл бұрын

@@SilentSooYun Hey, did you ever finish this? I'm about 15 prints in, and my resin cost estimates were way too optimistic hahaha

@SilentSooYun

Жыл бұрын

@@gertondesk I'm afraid I ended up doing a third-scale version for display... after first upgrading to a Mars2 Pro, which already cut down my time estimates *significantly* If I were to do a play-scale version, I think I would just do the detail bits of the upper decks and make the lower decks and rigging from standard craft materials like foamboard and balsa. Not only is it faster, stronger, and lighter, it keeps the resin cost well under triple-digits. In my honest opinion, something like this is only worth doing in resin if it's going to be used as a centerpiece throughout the entire campaign... like Spelljammer :)

@dragonkinfolk

Жыл бұрын

@@SilentSooYun I have an anycubic mono and packing each plate with as many that would fit took me about 60 runs at an average of 8-9 hours per run. and it took AT LEAST 5KG of resin

I don't see any swivel guns/patarero mounted on the railings, also needs some chase guns on the bow and stern.

what is the total weight of the assembled ship?

I have a project that I need help on to a model Mobile pirate ship to use for my demo, how can I touch base with you to eplain my project?

Can it print on a fdm printer?

@Darkechilde

2 жыл бұрын

Yes, you can - there's both FDM and resin printer files.

@thedoctoriam

2 жыл бұрын

@@Darkechilde good to hear

@sosoldben

Жыл бұрын

I printed on fdm except for the stairs and sails. The railing was tricky to get right on fdm but pulled it off. Also ended up breaking a few of the spikes. just removing them all and smoothed it out.

It can be printed on a photon s?

@LootStudios

2 жыл бұрын

Hey Olavo! The versions we have available of the ship are: -Smaller format resin printer version (Cut and supported. If your printer has a print area of 134 × 75 × 130 mm or larger you will also be good to go) -Big resin printer version (supported version for printers with a printing area of 192 x 120 x 200 mm or larger) -UNCUT version (no cuts to fit a print bed but still separate decks) -FDM version (Unsupported)

Can you do this on an FDM printer?

@LootStudios

8 ай бұрын

Yes, and we even provide specific cuts for FDM printing!

That ship is massive and beautiful. I can DM my address if you need it.

Anno 2023 I am building this ship, and with a small printer, I am a month in now. And for any aspirering ship builders.... it is a b*tch to piece together. A lot of filing down of pieces. And I mean aaa lot of filing. This is not Loot Studios fault or problem though. It is inherant of 3D printing. The only gripe I have is: Please, for the love of god, place the aligning pegs on the non supported side from now on. I had to file down so many aligning pegs just to get the supported side straight. That said... yes you can build this beautiful ship on the smaller printers but I would seriously advise this project to big printers for sure. If you are printing on a smaller printer... adjust your expectations drastically on seems and fit.

Is it me, or the pieces doesn t fit well together ?