You didn't put little standoff post off psu bracket. This connects to gpu tray underneath So it will take away the flex. Also riser cable bracket,screws into gpu riser tray This supports the weight of the vga

Thank you for this video! I was looking into this case for my new build. Also thinking about mounting it on the wall, but kind of worried about airflow if the sides are pressed against the wall.

This is the best 4090 build you have made yet

Well done, sir. Gorgeous build. I had been struggling with what case I liked to house the 4090 without putting too much strain on the cables, and I think the Thermaltake P3 Pro does the trick. Thanks a bunch.

It's almost like a mini version of my PC. This is a very good video as well.

There's a post to connect the front PSU bracket with the PCI shelf. Also, there's an L shaped bracket that mounts near the SATA ports to support the right edge of the graphics card. This case is much better for watercooling than air though. Your fans are going to get dusty.

I can’t wait to build my first PC

13:49 great job installing the AIO. 72 celsius on that :) bubbles in the pump. Always pipes down, not up. air went through

رائع 😍 إستمر 👏🏼

Such a lovely build, and lovely video, and many parts currently unavailable... :D

My guy needs more people who appreciate his work ! Nice build once again 😍

@bazle64

Жыл бұрын

Yuppy-tastic 🫶

I have in amazon list the same tower. I Love it, and im gonna get it soon..

Great video, mate, and a lovely case. Does that case come with a PCIE 5 riser cable, to support the card? If not, which riser cable have you purchased, for this particular build?

god damn it this thing looks magnificent. I know I will never be able to afford such a build but wowowow this is incredible!! I wish you lots of fun with this beast of a beauty and thanks for helping me out with ideas for my own gaming pc build in the near future. Finally got a specific plan in mind and I am curious what it will turn out to look like. Thanks!

Just ordered my 4090 prebuilt from Origin PC. Absolute beast

@Bondmaster007

Жыл бұрын

Have you been sleeping? I wouldnt be from excitement!!!! congrats

@TheTyphoon365

Жыл бұрын

A pre built? Hm

Very Nice👍

Awesome build looks very clean! I'm considering vertically mointing my gpu in nearby future with same case, is a 200mm 90degree riser cable long enough for this build or should i go 300mm. (I'd rather have minimal cable bends for cleaner look so 200 is preferred if possible) TYIA. :)

That’s the 4090 I want but the “press” and scalpers got them all again. When I get burned out on VR sim racing I’m switching to console. I ain’t played one since 2012 but I’m sure it’s a better experience now days.

You forgot to mount the stabilizer bracket for the GPU plate - it goes on the PSU holder and supports the plate holding the GPU. Which PCI-E Riser cable did you use?

When looking at the case on amazon it doesn't show the part where you can 3 fans in the front is that additional piece to buy? or just not advertised on amazon, also what riser cable did he use?

Question does this case come with the chase to install the fans in front like yours? Or is it a separate purchase.

theres gpu support included with the case

Hey James and Geekawhat curiosity, how come we don't see the average temperatures anymore for the PCs you build? All are pretty sick but it is something I find interesting when you use certain parts.

@DBMDAN

Жыл бұрын

Definitely something I’ll speak to James about doing next week. I think personally it’s a good idea to bring them back into the videos.

Would look so much better with the suprim gpu instead!

Very Nice build… But you linked the wrong case in your discription.

the main disadvantage is the cpu should've been ryzen 9

nice build bro...a question for u...why do u always benchmark cp2077 and spiderman on just high settings instead of using the max preset available..

Which riser cable is it?

Pls do with Coolermaster haf 700 evo.

average temps?

If u didn't use the rizer cable and slotted the gpu in the top slot would it cover slot 2? Could u fit a 4k60pro under it?

@tonead3748

Жыл бұрын

Yah I don't want to use a rizer cable and mount upright, my oll dynamic bottom fans blow fresh air intake into the gpu fans when gpu is old fashioned slotted, hence the "if you didn't use the cable" but thank though

Helllo :D U didnt had any issue with the thermaltake riser cable supplied with the P3? I cant make my 4090 to work with that riser cable, thermaltake says it needs another riser pci 4.0 ...

Isnt the GPU so close to the glass panel? I'm considering to buy this case but I'm afraid 4090 it's to big that it comes to close to glass panel and prevent fans to have good intake of air, could someone here confirm or tested this?

What's the build price?!

Could you please guve some numbers on the noise ? And how does it compare to FE an other models ?

@lnx648

Жыл бұрын

I own the same card, everything is great, thermals included. But the cheap fans unfortunately make a very annoying buzzing sound even at low RPM mode. The card does have a 0rpm mode (which likes to misbehave and not trigger at all at times), but it won't stay at 0rpm all the time, when the fans spin up a loud click sound will happen and the loud buzzing sound will start until the fans turn back off again. Aside from that no complaints, but the cheap fans really are a problem. Cannot give any numbers of the actual loudness of the GPU under stress, the stock curve is way too aggressive, a custom curve settling at around 50 to 55% gives stable thermals under 65c for much less noise, no numbers tho. Hope it helps.

Next build on hyte y60 please

@twinstars8812

Жыл бұрын

Dont think the 4090 can fit, it's gona be hard pressed against the glass.

there's a few things that could've been better about this build (not trying to hate - just pointing it out) 1st of all, why would you use 4800 mt/s ddr5 ram when 6000 mt/s is the sweet spot for ryzen 7000? even though it costs less, you're technically wasting money because you're getting significantly less performance. also 4800 mt/s is pretty outdated and slow now. It's like buying 2666mhz ddr4 ram instead of 3600mhz. 2nd: there's really no point in using a ryzen 7 7700x with a rtx 4090. If you're buying a 4090, you might as well go all out. A Ryzen 9 7900x or 7950x would've suited this build better. Also, even though the ryzen 7 may seem to have enough power, some games are actually being cpu limited (with the 4090) even with a ryzen 9 (or it could be drivers/software that's limiting it), so it would be better to go for ryzen 9 anyways 3rd: $89 for a few case fans is extremely overpriced. They may look cool and perform well, but you can like a 5 pack of 120mm case fans for way cheaper that look just as good and perform just as well one more thing - the motherboard seems little pricey to me and you could've went with a cheaper one to fit in a ryzen 9 if pricing is the issue. not really that big of an issue though, as it is a great motherboard, however if the cost of the motherboard is causing less performance, that's a problem other than that, it's a pretty solid build. these are simply the things i would've done differently since it's higher end, and once again im not trying to hate at all. just pointing out a few flaws/overlooks

Hi there, a little late but at 3:02 the strix e is actually an X670E board and not a X670 board

@ricsim78

Жыл бұрын

You are right, but the predecessor was the X570, even if the S (silent fan). A lot of people dub them X670 due to this.

bruh high end graphics card but mid range cpu?

@MrBigBasket

Жыл бұрын

The cpu is a 7 7700x mate are you living in the future where amd released the 90 thousand series thread ripper?

@ChineseQueen

Жыл бұрын

@@MrBigBasket yes but you know 7 came before ryzen 9? so why not go for the ryzen 9 7900X or something?

@Radutsepesh

Жыл бұрын

@@ChineseQueen Ehh, it’s recommended to go harder on GPU vs CPU for gaming. At least it’s new gen Ryzen; really going for anything above this will be over kill unless you’re massive into 3D rendering or video production. 7950x is 18% better in most creation apps, up to 90% better in HEAVY multi-core creation apps (3D rendering and what not).

@ChineseQueen

Жыл бұрын

@@Radutsepesh motherboard is important too 🤔

@Radutsepesh

Жыл бұрын

@@ChineseQueen Thought this was a GPU vs CPU comparison. 😅 Yes mobo is important

Out of curiosity what would be better an rtx4090 or 2 rtx 3090’s?

@remozian2673

Жыл бұрын

The 4090 would definitely be better for gaming, but I'm not sure about rendering

Why in the blue hell is Thermaltake using molex?

I want to get a PC like this

@shivpatel6007

Жыл бұрын

How

@ricsim78

Жыл бұрын

Save up, buy the stuff, build it or have someone you know build it and throw them some cash. Nice stuff takes money and that 4090 happens to take a LOT of money!

when someone complaining about his 4090 appearance me - enjoying my old laptop w/out gpu

Can you make PC build with Ryzen 7600x and rtx 3060 12g for 1250 dollars

can i use all these components but instead of a 4090 a 3080?

@jodiepalmer2404

Жыл бұрын

Yes

I really want one so bad

@shivpatel6007

Жыл бұрын

Ok

@shivpatel6007

Жыл бұрын

What is it

3867$ total cost

The new zotac cards look goofy to me. Like their 30 series cards looked amazing in compaision

the question is, what are we going to see different from a card that gives you 400+fps vs a card that gives you 100+fps ?😏

Hey, can you do a $2000 version.

@surfdawg705

Жыл бұрын

Oh a 4090? Lol impossible

@johnnyboogalo4897

Жыл бұрын

Bruh 4090 alone is that much lmao

@derekjtaylor

Жыл бұрын

4090 and a potato.

1 fan 89$ ?

@admodz3292

Жыл бұрын

3 fans

Anyone ever tell you that you look like Taron Egerton?

that case is not the p3 pretty sure its the p6. might wanna fix that and actually know what your using next time lol.

@STRET24

Жыл бұрын

Says right on the box P3 but also a TG Pro version.

@twinstars8812

Жыл бұрын

It's a P3 TG Pro (just came out), not P6.

@parkersgarage4216

Жыл бұрын

@@STRET24 click on link in description

@parkersgarage4216

Жыл бұрын

@@twinstars8812 click on link in description

@parkersgarage4216

Жыл бұрын

@@thermaltakeuk when using this case, can you fit a 3090ti horizontal when using a 360mm nzxt aio? When is it available to purchase? Does it come w a pcie gen4 riser? Thanks for letting me know there's a new case.

Thermaltake is bad enough But also still using Molex... Junk

Uuuh, can I have it lol?

6:21

another episode of i cant afford it

So you are helping AMD and Nvidia to justify their Expensive GPUs Pricing by showing with exaggeration for performance and the Material look and quality, well played man 👏🏻👏🏻, I believe your videos will be good for watching 😂 and bad for buying 👎🏻 This is what means literally that someone is selling his words ☝🏻😂.

At least no lying clickbait title about this is a $2500 build! Meanwhile in reality this would be $5000+ and even more in other countries that ain't america.

BAHEMETH

2nd here

3rd

Bruh 10 min ago

12th

5thhhh

Second

32nd haha

firsttttttttttttttttttttttttttttttttt

@mehmet8957

Жыл бұрын

Dum$

@skymoov

Жыл бұрын

Bro we're in 2022

suuuuu'

69th comment

children

Shit buliding

zotac is one of the worst third party/cooler maker

I don't like it.