Construction, dirtbike, dirtbike stand. from scratch, from pallet, carpenter, woodworking
Жүктеу.....
Пікірлер: 85
@Alex-uz6bk2 жыл бұрын
I'm in Mexico. No Harbor Freight here. I just built a copy of this with wood I had laying around my yard. No more having my bike fall off 5-gallon buckets. Really appreciate the video.
@patricklofton2860
10 ай бұрын
That’s great to hear. I’m glad the video helped you
@joshuamarks6175
10 ай бұрын
i used two concrete blocks and a piece of wood for a while, now i am going to build something permanent for my bike thanks for the bucket idea incase of emergency thanks for the vid and best of luck enjoying this life
@trival217 жыл бұрын
Dude, very simple and i am guessing the pallet was free. Totally love the idea, thanks for taking the time to make this video.
@quotabikelife11548 жыл бұрын
Awesome video.. Extremely creative and love the fact that you recycle a pallet into something useful again.
@4312inthenaki8 жыл бұрын
Very inspiring! It's called design and build folks!
@johnmason9748 жыл бұрын
How to dismantle a pallet. Or how to get a nail in your foot.
@alejandrolazaro3957 жыл бұрын
makita, nice tools and very well done
@TN_HondaDad6 жыл бұрын
Very nice! Very creative - nice bike too! :-}
@kevinngonz6 ай бұрын
Nice 👍🏻
@tdub98998 жыл бұрын
Good work I would love to build something like this but afraid my ADD would get the better of me. Be thankful you dont have that problem lol.... Very nice.
@tomatoknuckles4 жыл бұрын
That's class dude ill definitely be copying that 👍
@westonphillips10367 жыл бұрын
Nice work love the creativity
@patricklofton2860
4 жыл бұрын
Weston Phillips thank you
@leonardoherreraleon332310 ай бұрын
super cool
@ultimaetsolder7 жыл бұрын
Thats awesome.
@garajulfaragaraj4 жыл бұрын
Good job 👍
@jacobjordan76445 жыл бұрын
Oh my God that sounds so funny to me tick tick tick clink clink clink tap tap tap skip skip skip
@1aduece8 жыл бұрын
For those that don't not know how to mount the bike on the stand u grab the back of the bike lifting the back wheel of the ground leaving the front wheel on the ground and u set the bikes frame onto the stand until it is balanced.
@GASBASSASSANDBRASS
7 жыл бұрын
Matthew Clark good job captain obvious
@mhtzone8 жыл бұрын
Thank you for sharing
@irhj9 жыл бұрын
good job
@elvindcruz57377 жыл бұрын
it is fun to make your staff
@pedroguerrero6011 ай бұрын
0:54 that was close call!! Watch your foot
@motoaj60042 жыл бұрын
Good job
@uhmeizuhngralphf05493 жыл бұрын
What brand of spray paint were you using
@williamanderson79757 жыл бұрын
not bad, i was wondering what type of bike could sit on it. i live in Maui so there are pallets here everywhere! i will be rebuilding my monoshock and need a solid bike stand that fits my budget. FREE is right down my alley...
@patricklofton2860
4 жыл бұрын
William Anderson my Honda Crf 450 sits on it
@tipohold76237 жыл бұрын
can you tell me the dimension or size???btw nice video
@danypena42399 жыл бұрын
de cuanto son las mediadas y de que angulo son??
@caydenlynn4286 жыл бұрын
How high did you make the stand need to know ASAP thanks
@owl18733 жыл бұрын
Cool👍
@motoninja27478 жыл бұрын
now make me one haha
@sr-channel72166 жыл бұрын
if i have all tools like u i will made motocross from palet. hahaha
@Ben_cheikh9 жыл бұрын
It looks good, what was the angle of your first cuts? Thanks,
@jenman2581
4 жыл бұрын
Hicham 28
@lewiscrow23393 жыл бұрын
Do you have blueprints or a template I could use one of these for my dirtbike.
@jacobjordan76445 жыл бұрын
Lol first minute I guess funny as hell tick tick tick
@nathanjones5059 жыл бұрын
NICE BUT HOW YOU PLACE BIKE? What was angle of first cut? Could of laid off the speed buddy and said something ...Damn tweeker, but for laugh cracking up lol
@levipompoco85078 жыл бұрын
What are the dimensions of this stand????
@homerfj11008 жыл бұрын
That was bloody superb. Your skill? From school? Or self taught?. Ta very much. I will scavenge pallets. And invest in power tools.
@uhmeizuhngralphf05493 жыл бұрын
Nice
@dimjat3 жыл бұрын
Now make another one with steel 😁😁
@ashleywhelan87169 жыл бұрын
You should make and sell these on face book or something you would make lots of money
@patricklofton286010 ай бұрын
What would you guys like me to make a video of next?
@JT-mq1jk2 жыл бұрын
What was the angle dude used for the 2x4's?
@TN_HondaDad
Жыл бұрын
Typically between 10-15 degrees is just enough.
@likeaboss65626 жыл бұрын
Dimensions?
@matthewframe66167 жыл бұрын
please make more videos
@hendrikkpraszz20683 жыл бұрын
Apa jiah welek
@jarradhume46988 жыл бұрын
What are the angles you are cutting at
@christophergreen5735
7 жыл бұрын
I'd choose 10 or 15 degrees. Or, looking the other way, 75 or 80 degrees. Whenever I make sawhorses, I usually use the 10 degree angle.
@oo0Spyder0oo6 жыл бұрын
Those of us who have been using milk crates all these years are scratching our head wondering if this was worth the effort.
@EpilepsyWarning
6 жыл бұрын
oo0Spyder0oo those of us with real sized bikes can't use milk crates because ours are higher off the ground.
@jasonedwardwood
5 жыл бұрын
oo0Spyder0oo hahaha... what he said ☝
@oo0Spyder0oo
4 жыл бұрын
@@EpilepsyWarning Well I have a 'real sized' bike, I used my real sized brain to add more height, but that might be asking too much from you judging by your reply.
@trucksandstuff56548 жыл бұрын
Just get a bucket
@jarrodplumley
7 жыл бұрын
Just had one start collapsing on me today with a dirt bike under 300 pounds... I'll take a stand any day over a bucket.
@nordicalpha13765 жыл бұрын
safety is NOT a number one priority here I guess
@Carpermike208 жыл бұрын
can I get size of cuts please
@marco20838
8 жыл бұрын
I don't know but go a site where They buy stands and take the hight of it
@CABIX_815 жыл бұрын
125cc? Whats the demensions/measurement on ur stand?
@jenman2581
3 жыл бұрын
CABIX81 50 by my ass
@garrettschmiedeke56926 жыл бұрын
You didn't put the measurements in
@EdgardoTortonaAlpha79 жыл бұрын
you did not show how to mount the bike on the stand
@k-tron997 жыл бұрын
Stuff it I'll just go to amx and buy a bike stand
@rileymaclachlan2366
6 жыл бұрын
K-TRON amx at Epping?
@nazarenotolosa4188
6 жыл бұрын
K-TRON
@asherrose41147 жыл бұрын
click bait! its a foot stool, work bench, portable chair, flower pot stand, beer holder, mx stand :)
@strypov2404 жыл бұрын
How to get a nail in your foot
@patricklofton2860
4 жыл бұрын
Traze vivid no nails in the foot
@Puckgrinder856 жыл бұрын
I guess if you have nothing to do, but my time is worth more than the 30$ it takes to buy one at harbor freight.
@EpilepsyWarning
6 жыл бұрын
Puckgrinder85 fuck off who cares what you think lmao
@Puckgrinder85
6 жыл бұрын
You fuck off, I'm just telling it how it is. The dude did a good job, but for 30$ it ain't worth it.
@braapey2623
6 жыл бұрын
But you can say I built that
@patricklofton2860
4 жыл бұрын
Puckgrinder85 you jealous you don’t know how to use a saw?
@patricklofton2860
4 жыл бұрын
Puckgrinder85 real men build their own shit instead of buying Chinese shit from harbour freight
@John-ep4in7 жыл бұрын
congrats. you spent hours building something that can be bought for $30 at harbor freight.
@motomash6143
6 жыл бұрын
Hours?? 12 mins you fucking moron....
@patricklofton2860
4 жыл бұрын
You can have your 30 dollar stand from harbor freight buddy. I’ll keep mine that I built with blood sweat and tears
@TN_HondaDad
3 жыл бұрын
Gee, have some junk from China or put a little engineering, time, sweat into a project and have the satisfaction that you built it. hmmm, I'll take the latter thank you very much.
Пікірлер: 85
I'm in Mexico. No Harbor Freight here. I just built a copy of this with wood I had laying around my yard. No more having my bike fall off 5-gallon buckets. Really appreciate the video.
@patricklofton2860
10 ай бұрын
That’s great to hear. I’m glad the video helped you
@joshuamarks6175
10 ай бұрын
i used two concrete blocks and a piece of wood for a while, now i am going to build something permanent for my bike thanks for the bucket idea incase of emergency thanks for the vid and best of luck enjoying this life
Dude, very simple and i am guessing the pallet was free. Totally love the idea, thanks for taking the time to make this video.
Awesome video.. Extremely creative and love the fact that you recycle a pallet into something useful again.
Very inspiring! It's called design and build folks!
How to dismantle a pallet. Or how to get a nail in your foot.
makita, nice tools and very well done
Very nice! Very creative - nice bike too! :-}
Nice 👍🏻
Good work I would love to build something like this but afraid my ADD would get the better of me. Be thankful you dont have that problem lol.... Very nice.
That's class dude ill definitely be copying that 👍
Nice work love the creativity
@patricklofton2860
4 жыл бұрын
Weston Phillips thank you
super cool
Thats awesome.
Good job 👍
Oh my God that sounds so funny to me tick tick tick clink clink clink tap tap tap skip skip skip
For those that don't not know how to mount the bike on the stand u grab the back of the bike lifting the back wheel of the ground leaving the front wheel on the ground and u set the bikes frame onto the stand until it is balanced.
@GASBASSASSANDBRASS
7 жыл бұрын
Matthew Clark good job captain obvious
Thank you for sharing
good job
it is fun to make your staff
0:54 that was close call!! Watch your foot
Good job
What brand of spray paint were you using
not bad, i was wondering what type of bike could sit on it. i live in Maui so there are pallets here everywhere! i will be rebuilding my monoshock and need a solid bike stand that fits my budget. FREE is right down my alley...
@patricklofton2860
4 жыл бұрын
William Anderson my Honda Crf 450 sits on it
can you tell me the dimension or size???btw nice video
de cuanto son las mediadas y de que angulo son??
How high did you make the stand need to know ASAP thanks
Cool👍
now make me one haha
if i have all tools like u i will made motocross from palet. hahaha
It looks good, what was the angle of your first cuts? Thanks,
@jenman2581
4 жыл бұрын
Hicham 28
Do you have blueprints or a template I could use one of these for my dirtbike.
Lol first minute I guess funny as hell tick tick tick
NICE BUT HOW YOU PLACE BIKE? What was angle of first cut? Could of laid off the speed buddy and said something ...Damn tweeker, but for laugh cracking up lol
What are the dimensions of this stand????
That was bloody superb. Your skill? From school? Or self taught?. Ta very much. I will scavenge pallets. And invest in power tools.
Nice
Now make another one with steel 😁😁
You should make and sell these on face book or something you would make lots of money
What would you guys like me to make a video of next?
What was the angle dude used for the 2x4's?
@TN_HondaDad
Жыл бұрын
Typically between 10-15 degrees is just enough.
Dimensions?
please make more videos
Apa jiah welek
What are the angles you are cutting at
@christophergreen5735
7 жыл бұрын
I'd choose 10 or 15 degrees. Or, looking the other way, 75 or 80 degrees. Whenever I make sawhorses, I usually use the 10 degree angle.
Those of us who have been using milk crates all these years are scratching our head wondering if this was worth the effort.
@EpilepsyWarning
6 жыл бұрын
oo0Spyder0oo those of us with real sized bikes can't use milk crates because ours are higher off the ground.
@jasonedwardwood
5 жыл бұрын
oo0Spyder0oo hahaha... what he said ☝
@oo0Spyder0oo
4 жыл бұрын
@@EpilepsyWarning Well I have a 'real sized' bike, I used my real sized brain to add more height, but that might be asking too much from you judging by your reply.
Just get a bucket
@jarrodplumley
7 жыл бұрын
Just had one start collapsing on me today with a dirt bike under 300 pounds... I'll take a stand any day over a bucket.
safety is NOT a number one priority here I guess
can I get size of cuts please
@marco20838
8 жыл бұрын
I don't know but go a site where They buy stands and take the hight of it
125cc? Whats the demensions/measurement on ur stand?
@jenman2581
3 жыл бұрын
CABIX81 50 by my ass
You didn't put the measurements in
you did not show how to mount the bike on the stand
Stuff it I'll just go to amx and buy a bike stand
@rileymaclachlan2366
6 жыл бұрын
K-TRON amx at Epping?
@nazarenotolosa4188
6 жыл бұрын
K-TRON
click bait! its a foot stool, work bench, portable chair, flower pot stand, beer holder, mx stand :)
How to get a nail in your foot
@patricklofton2860
4 жыл бұрын
Traze vivid no nails in the foot
I guess if you have nothing to do, but my time is worth more than the 30$ it takes to buy one at harbor freight.
@EpilepsyWarning
6 жыл бұрын
Puckgrinder85 fuck off who cares what you think lmao
@Puckgrinder85
6 жыл бұрын
You fuck off, I'm just telling it how it is. The dude did a good job, but for 30$ it ain't worth it.
@braapey2623
6 жыл бұрын
But you can say I built that
@patricklofton2860
4 жыл бұрын
Puckgrinder85 you jealous you don’t know how to use a saw?
@patricklofton2860
4 жыл бұрын
Puckgrinder85 real men build their own shit instead of buying Chinese shit from harbour freight
congrats. you spent hours building something that can be bought for $30 at harbor freight.
@motomash6143
6 жыл бұрын
Hours?? 12 mins you fucking moron....
@patricklofton2860
4 жыл бұрын
You can have your 30 dollar stand from harbor freight buddy. I’ll keep mine that I built with blood sweat and tears
@TN_HondaDad
3 жыл бұрын
Gee, have some junk from China or put a little engineering, time, sweat into a project and have the satisfaction that you built it. hmmm, I'll take the latter thank you very much.
boring........
@liamsmith4713
7 жыл бұрын
whatd you expect?