01:00

@Dahakra

2 жыл бұрын

xDDD

@RandomFactor

2 жыл бұрын

wait, does....does he sell miniac-branded short shorts. who wears short shorts??

@harriswilson9952

2 жыл бұрын

@@RandomFactor People with good legs.

@dickbison

2 жыл бұрын

@@RandomFactor only grandpas amd fatties wear the long ones

@Daldo1411

2 жыл бұрын

thank you

Scott: I know what you're thinking. Me: Scott didn't blur out his license plate? Bold move...

@DeathByFrenchFry

2 жыл бұрын

right??

@janeblogs324

2 жыл бұрын

Stole his neighbors plate for the video

Love it! How about a magnet extraction tool for your objectives/plugs? If you use a strong magnet you might be able to stack them as you extract them as well. Nice one Scotty bb

@NathanDrennan

2 жыл бұрын

I was totally thinking this, and make the back of the objective marker match the board, then you just flip them instead of needing to swap em

@ProrokLebioda

2 жыл бұрын

Great idea! Thought about it and didn't notice that someone else already mentioned it.

The world needs more abstract terrain.

@jonathansmith2791

2 жыл бұрын

thought of you while watching this build... I think he did you proud!

So cool. PSA: wear a mask when sanding MDF! We can't have Scott getting mesothelioma!

@MufasaTheMan

2 жыл бұрын

But then he might be entitled to compensation.

@evilsponge6911

2 жыл бұрын

My lungs hurt watching that

@adamtomlinson918

2 жыл бұрын

@@MufasaTheMan then he should call J.G. Wentworth to get his cash now

@dwi2921

2 жыл бұрын

More like myeloid leukemia but sure...

@dwi2921

2 жыл бұрын

@@nathanielbugg7355 Indeed. MDF is bound together with formaldehyde.

If you embed little magnets in the bottom of the plugs and the objective tokens it will be easier to pop them out with another magnet instead of trying to pry them out each time. Prying them out will probably damage the edges around them over time.

@Jkos1980

2 жыл бұрын

Or he can put a divot on one side of the insert, that way it just one push to pop out the other side :)

You know it's a fine day when the goodiest of PPs release a new video!

This is pretty similar to the table topper I made for my coffee table! I have a regular coffee table and don't have space in my 1 bedroom apartment for a full length table to play DnD with my friends. So I designed a topper that extended the top of the table by about 5 inches on either side to create an outer lip area that my players could put their drinks and snacks and dice in as well as doubling as a rolling tray. This all left the center area which was the dimensions of my actual coffee table surface free for minis. I also made a 1 inch grid the size of the central surface in photoshop and got it printed with a dry erase coating for DnD purposes. And it only cost me about $150 and a day of work. Super fun project.

@Miniac

2 жыл бұрын

That sounds super useful!

@tukuiPat

2 жыл бұрын

me and my friends had done the same thing with my old metal fire pit/table on my back porch, though we had gone with the outer dice/drinks/etc area being raised up so the play area was walled off.

I come for the content, I live for that pinched harmonic! Beautiful table man. Love that rust effect paint.

Awesome project!!! And I NEED the Schrute Farms sweatshirt 😁

Those short-shorts scream chick magnet too. Combined with the minivan - damn boss, what lady could resist?

Ooooh, this looks like fun! :-)

@cthulu9182

2 жыл бұрын

You can do it goober but not just in hobby works in any aspect of your life as long as you try

@Wallach_a

2 жыл бұрын

@@cthulu9182 name doesn’t even remotely check out. 💁🏻

If you want the most out of your static grass applicator, stick the grounding rig into the glue you're applying the grass on ( I've also found a nail attached to the crocodile clip gets in the way less, than the little four leg unit does) and then get the static grass applicator as close to the surface as possible, when you apply it! Get those bad boys standing straight up!

Shoutouts to Black Magic Craft AND Luke Towan? Nice! I love this community... :)

You should totally do another Greyjoy table build were it's the decks of ships in the middle of a naval battle.

@Miniac

2 жыл бұрын

👀👀👀👀

I definitely appreciated how you kept every little mistake made in the video. good job

Reminds me of model train layout boards I have make in the past. I would wire lighting to the buildings and hang it on the wall when not in use but I would light everything up to give an art look when on the wall.

I really enjoy seeing you explore these different areas of the hobby! The topper looks great!

Power to the mini van owners and driver. ✊🏻🇦🇺 Plus your table topper, awesome. Living here in Japan space is often an issue, so this is defiantly a project for me.

This is awesome, love how it turned out!

The opjective marker thing you did was briliant, nice way of always knowing where the objectives are, for the game you are playing

Absolutely love these types of build videos Scott!

So happy to see you bringing more life in ASOIAF

I suggest you reinforce those holes that you plan to use to hang the board! Some cut bits of PVC pipe would go a long way. The MDF is, imo, likely go fail over time.

I love this hobby, thanks so much for fun and wisdom

Scott drives a minivan and doxed himself!

I like the thought behind the puddles and woodwork, the idea of presenting the theme while holding playability high. Thanks for the video : )

Scott, this table is amazing! Your passion for the asoiaf miniature game has got me listening to the George Martin books while I paint my own miniatures. Fantastic work man! Can’t wait to see you play a game on that beautiful beast!

'This chick magnet'. 0:48 Oh, oh, giving away secrets here... 'Nobody messes with the VAN.' - Jim Carrey

I love how laser focused and purpose made this thing is. It is a unique product for your exacting needs.

Hysterical. On several levels - deck, garden, deck. Great vid, back on form Scott.

That pond with the Woden piers turned out awesome

Love it Scott great stuff as always

ive dreamt about making tables like this and this was an awesome way to approach it!

XPS, PVa glue, Polystyrene... Jeremy is gunna LOVE this.

I would suggest putting magnets in your token markers and place holders to help with taking them out other then using a hobby knife

I feel like I wished this video into existence an hour or so ago. Great vid and awesome table!

love the decking part!

Those wood planks turned out AWESOME

sick table! the jewelry in the ponds is a really cool touch

This was great - educational, inspiring and really entertaining!

Nice! Great board!

That turned out great!!!

A spray in spots of matte and gloss modpodge mixed with water will give a satin/eggshell finish which may make the board a little more wet looking. Fantastic project! It was a super fun watch

@Miniac

2 жыл бұрын

I might give that a shot!

@buzzedaldrin7316

2 жыл бұрын

@@Miniac AK interactive wet effects is another good option to try.

Nicely made, also loving the Crysis T!

Looks great

Oh my days. I have been waiting for you to do one of these. Nice to see a board that isn't hills and undulations. Very versatile

I did this, but made it in two parts, so it snapped together with pins and broke down to 2x4 for storage and transport. Solid oak trim, nice and durable! The foam hides on the inside of the two sides, with a slightly raised lip to prevent the faces from touching :D Game board and table toppers are my favorite type of hobby project!

Short shorts and a kickstarter tease....this video is just one big thirst trap Table topper looks great. I really love the built in objective markers to make setup super easy

Such a nice neighborhood :) and really nice board, love it.

So cool! I always think about building a table.

You actually made a very compelling argument for a minivan. That is bigger than my Chevy Silverado truck bed!

Great project my dude

There's just something about the sound of dice on finished foam tables that's so satisfying and I miss on the table mats, a small thing, but cool to see a foam table being made right now.

Minivan is the BEST bruh..no need to explain..in time people come to their senses..

Fantastic! 10/10 coolness

The level of creativity behind this design is pretty epic.

We love your videos Miniac! We share your channel with a lot of new hobbyists that come through our Hobby shop.

For the sheets of reconstituted human bone, you need to go to the "special" dealers. It's all about who you know.

@badger7359

2 жыл бұрын

Shhhhhh....there's a limited supply you know!

Dude, I can't even concentrate on your work in the table with that amazing outside green space on the background. If that's your garden or your view from home...CONGRATULATIONS MAN!

Very cool project

you're a trip dude. Love the channel.

Love the minivan bit. Being able to haul 4x8 sheets was what sold me on our Caravan. The car salesman was confused at first when I would pop the trunk of each van or SUV he wanted to show us, pull out a tape measure, then a few seconds later, ask to see the next vehicle.

Minivans are pickup trucks you can use year round regardless of weather, store your cargo securirely, and drive 7 people in. Plus your friends won't ask you for help moving just cause you have a truck even though your car is great for moving

Awesome, thank you for this, I've been contemplating building something similar for Kill Team.

From experience with model railway baseboards (in the UK it is more common to use solidtop baseboards for model railways, whereas more common to use open frame for us model railroads) it is worth considering ply over mdf if you live in a humid area. Mdf is very prone to warping unless very well supported and treated. Ply is more stable in this regard. My wargaming table will be 2x 3ftx2ft boards of laser cut ply with a ply support frame. It is strong, rigid and lightweight. They were originally ordered for a model railway project, but a house move changed the plans. None of the above takes away anything from the video though.

So Good!

So cool!

Made a 40k table in 3 bits so it can do the 3 map sizes. Got 9mm MDF cut to size by B&Q cutting service, similar to Matt I used 34mm X 34mm planned wood to under the edges to give it rigity. Covered in sharp sand and PVA, oven dried the sand and should have sieved out the big bits. Between the boards I inserted aluminium pipe and then wood dowels to ensure the board will stay at the right height when joined. Primed, painted black with wall paint, drybrushed and then ronseal matt varnish. Very hard wearing surface. Finally some little toggle latches to keep together when joined.

The objective holder are such a cool idea, I hate measuring stuff when setting up the table

This was dope.

Love me a table build!

Love the Corridor Digital shirt.

Very nice. I care nothing about the table topper but your vids are so well done that I watched this anyway and was not disappointed.

I love your idea of setting the objective markers into the board. I am for sure stealing this when I build my table!

@Miniac

2 жыл бұрын

Go for it! Let me know if you need the 3D model :)

I go to Menards and buy their “mistint” house paints, just paint that came out the wrong color. They’re usually stupid cheap and are very strong, house paint flows really well too and is self leveling. Perfect for that first coat on terrain boards or to mix with modpodge for terrain pieces.

Always love a board build, lists of work but a massive shore with lots of rock pools ans seaweed would be awesome!

Great stuff friend 👏 👍

This is awesome!)

Dude! Wow! I didn’t realize that not only did you kick ass at mini painting, but that you could do the big craft stuff too! NICE JOB, and MOST IMPRESSIVE. :)

First Video in a long time Real enjoyed

THIS IS AWESOME

I play that game and have always wanted to build a big table with all sorts of cover. I'll probably watch this again when I try to build my table.

Octopus October!! 🐙 nice topper!!

Only logical that a MINIAC would have a MINI VAN! 🤘

Love it

Great video

who else noticed that Scott drove out forward at the start of the video because the reverse lights where not on so he could keep the car in foucs for the shot ? well done Scott i noticed but well done ;)

nice work👍

It’s obvious you love this game. I love that.

I was expecting the thirst teaser at the end to be Scott in his short-shorts again.

5:24 Nah, you made the right choice to carve and then burn, it's far more controlled in the outcome and you're less likely to start a small fire that creates a bubbling crater (which is why my 40k table has a toxic landfill/ green resin pool in the middle)

You could use gloss varnish to make the ground look more wet/damp.

So glad you're enjoying ASOIAF

I see you got your greyjoy quellons! Something I've tried recently is numbering my objective tokens on one side so that when we play the missions with the obj cards is to set the cards to one side with a die on each to show to which obj it belongs to. Saves of accidentally knocking the cards about and puts them somewhere easy for both players to see

That's great and I like how you considered ease of moving the movement trays. Now that your done if you had made the objective holders have a recess on just under half the width of the token you could have pressed down on that side to pop them up easily without resorting to a hobby knife. Oh well, if it really bugs you you can print an insert and drill them out with a drill the same diameter as the token.

Love the Corridor Crew t-shirt! Always nice to see a crossover from some of my favorite content creators!

@Miniac

2 жыл бұрын

Corridor Crew has been my #1 favorite channel for such a long time. Makes the deal even sweeter that Sam, Niko, and Jake are from Minnesota!

@MisterAustin3435

2 жыл бұрын

@@Miniac you should send them a mini for Son of a Dungeon season 2!

You’re videos are awesome and I enjoy them a lot so wear a mask when sanding so you can stay healthy to keep making these videos for my enjoyment! 😊

I'm into all of this

Of course the miniac drives a minivan. It's on brand!