I build an absurdly high-effort drag car to announce a drag car building contest. Join the contest on the Discord server: / discord
Жүктеу.....
Пікірлер: 43
@insaneinferno8 Жыл бұрын
This is amazing, your attention to detail is absolutely insane
@noname2242
Жыл бұрын
Thanks!
@3.4inchforehead93
5 ай бұрын
@@noname2242what is the turbocharger mod?
@noname2242
5 ай бұрын
@@3.4inchforehead93 It's been over a year since I made this, so I'm really not sure. I've always just had every mod in the game installed, because it's easier for me that way.
@mykkalwright6564 Жыл бұрын
I really appreciate the quality of your builds, they are awsome
@noname2242
Жыл бұрын
Thanks!
@ihatewardogs
Жыл бұрын
@@noname2242 how did you cut the front off the body?
Very well done, I think the only thing that is off about it is that there would be a plate around the transmission and drive shaft. So if they did decide to disassemble themselves the driver wouldn't have any shrapnel thrown at them
@noname2242
Жыл бұрын
I don't think I saw that in any of my reference photos, but I could be wrong - plus even if it's not a common thing, it's still probably a good idea. I would assume that's what the thick... tube thing over the driveshaft is, but I didn't see anything for the transmission.
@alexwesley6829
8 ай бұрын
Agreed! The trans tunnel!
@alexwesley6829
8 ай бұрын
@@noname2242I'm a nhra nut, and I watch videos in builds ALL the time, and ALL nhra specced cars HAVE to have a trans tunnel to pass inspection
@noname2242
8 ай бұрын
@@alexwesley6829 Interesting. Probably wise - if the driveshaft lets go it's not exactly ideal for it to have no obstacles on its way to decapitate the driver.
@sebastianvettelfan9001 Жыл бұрын
If you feel like it you should add a wheelie bar, parachute, drag wing, and a hood w a cowel
@morphie25728 ай бұрын
love how its "sensible" but in the thumbnail, i instantly see a twincharged engine
@noname2242
8 ай бұрын
Nothing says sensible like 300+ fixtures and untold amounts of sanity wasted on a 3D twincharged dragster engine.
@AdamLindsayFootMusic Жыл бұрын
Glad to see that Automation is back on the channel
@coatl8648 Жыл бұрын
wowie i sure hope people participate in the contest!
@vrietman Жыл бұрын
I really enjoy your automation vids!
@noname2242
Жыл бұрын
Thanks!
@duckyman17556 ай бұрын
i have never seen this much detail on an automation
@mot3600official Жыл бұрын
Wow this is much more effort than i expected in that car
@noname2242
Жыл бұрын
Yeah, this was one of my more high-effort builds.
@alexwesley68298 ай бұрын
Hey man, If that's your first attempt at a NHRA specced chromolly cage, then I'd say you did a REALLY good fucking job bro!!!! Really, well done!!!! 🙏
@noname2242
8 ай бұрын
Thanks! (for some reason your comment doesn't show up unless I check KZread Studio; I think it's trying to censor you. Wish I could make it not do that)
@Lifeof728 Жыл бұрын
🔥
@gelobeep81888 ай бұрын
leroy the sawage
@alexwesley68298 ай бұрын
I have to say, the blower is a lil short....it should be taller than it is...also, twin charging isn't allowed in NHRA rules races... though, they are fucking cool....as a drag car for doing non-nhra races, would be sweet!
@noname2242
8 ай бұрын
Yeah, it's been over a year so I don't remember for sure, but I don't think this was built to NHRA spec - the twin charging was mostly a solution for me not wanting to figure out how to do that top fuel/funny car style engine blower with Automation parts.
@mykkalwright6564 Жыл бұрын
I made a 6.0 second drag car, available on beamng mods page. But the car is difficult to drive :/
@Poss_47 Жыл бұрын
your sound is coming clear, only issue is noise in the mic
@noname2242
Жыл бұрын
I see, I tested the two mics against each other a while ago and this one seemed to have less, but I'm not sure - I think that was with the gain lower.
@ZSMracing18 күн бұрын
I’d love to see you build another car with all the updates that have happened, I’ve done a 5.92 with a 4 cylinder and nitro of course but I have been faster with other cars, can anyone beat this???
@noname2242
18 күн бұрын
Every time I try to make something in Auto these days I end up burnt out, so no guarantees. That said, the supercharger update, if that actually comes out in my lifetime, might motivate me to make something?
@xdToxicLlama3 ай бұрын
link to download would be nice..
@-eduarth_ab66934 ай бұрын
I have a 6.285 second drag car 😮
@ThatOneAviationEnthuiast3 ай бұрын
a suggestion is to use fillman86's supercharger mod for all automation cars it allows you to put a supercharget plus the turbos you can put in from automation
@noname2242
3 ай бұрын
This was a very long time ago - that mod might not have even existed back then.
@ThatOneAviationEnthuiast
3 ай бұрын
@@noname2242true
@ThatOneAviationEnthuiast
3 ай бұрын
@@noname2242 I also tried making a custom drag car in automation but the module engine plugin doesn’t work anymore with the current version
@danielevander14188 ай бұрын
whats the MOD
@phroogo...8 ай бұрын
What chassis did you use
@noname2242
8 ай бұрын
No idea - it's been a year, and I don't think I still have the file to check.
Пікірлер: 43
This is amazing, your attention to detail is absolutely insane
@noname2242
Жыл бұрын
Thanks!
@3.4inchforehead93
5 ай бұрын
@@noname2242what is the turbocharger mod?
@noname2242
5 ай бұрын
@@3.4inchforehead93 It's been over a year since I made this, so I'm really not sure. I've always just had every mod in the game installed, because it's easier for me that way.
I really appreciate the quality of your builds, they are awsome
@noname2242
Жыл бұрын
Thanks!
@ihatewardogs
Жыл бұрын
@@noname2242 how did you cut the front off the body?
@noname2242
Жыл бұрын
@@ihatewardogs steamcommunity.com/sharedfiles/filedetails/?id=2723813006
Very well done, I think the only thing that is off about it is that there would be a plate around the transmission and drive shaft. So if they did decide to disassemble themselves the driver wouldn't have any shrapnel thrown at them
@noname2242
Жыл бұрын
I don't think I saw that in any of my reference photos, but I could be wrong - plus even if it's not a common thing, it's still probably a good idea. I would assume that's what the thick... tube thing over the driveshaft is, but I didn't see anything for the transmission.
@alexwesley6829
8 ай бұрын
Agreed! The trans tunnel!
@alexwesley6829
8 ай бұрын
@@noname2242I'm a nhra nut, and I watch videos in builds ALL the time, and ALL nhra specced cars HAVE to have a trans tunnel to pass inspection
@noname2242
8 ай бұрын
@@alexwesley6829 Interesting. Probably wise - if the driveshaft lets go it's not exactly ideal for it to have no obstacles on its way to decapitate the driver.
If you feel like it you should add a wheelie bar, parachute, drag wing, and a hood w a cowel
love how its "sensible" but in the thumbnail, i instantly see a twincharged engine
@noname2242
8 ай бұрын
Nothing says sensible like 300+ fixtures and untold amounts of sanity wasted on a 3D twincharged dragster engine.
Glad to see that Automation is back on the channel
wowie i sure hope people participate in the contest!
I really enjoy your automation vids!
@noname2242
Жыл бұрын
Thanks!
i have never seen this much detail on an automation
Wow this is much more effort than i expected in that car
@noname2242
Жыл бұрын
Yeah, this was one of my more high-effort builds.
Hey man, If that's your first attempt at a NHRA specced chromolly cage, then I'd say you did a REALLY good fucking job bro!!!! Really, well done!!!! 🙏
@noname2242
8 ай бұрын
Thanks! (for some reason your comment doesn't show up unless I check KZread Studio; I think it's trying to censor you. Wish I could make it not do that)
🔥
leroy the sawage
I have to say, the blower is a lil short....it should be taller than it is...also, twin charging isn't allowed in NHRA rules races... though, they are fucking cool....as a drag car for doing non-nhra races, would be sweet!
@noname2242
8 ай бұрын
Yeah, it's been over a year so I don't remember for sure, but I don't think this was built to NHRA spec - the twin charging was mostly a solution for me not wanting to figure out how to do that top fuel/funny car style engine blower with Automation parts.
I made a 6.0 second drag car, available on beamng mods page. But the car is difficult to drive :/
your sound is coming clear, only issue is noise in the mic
@noname2242
Жыл бұрын
I see, I tested the two mics against each other a while ago and this one seemed to have less, but I'm not sure - I think that was with the gain lower.
I’d love to see you build another car with all the updates that have happened, I’ve done a 5.92 with a 4 cylinder and nitro of course but I have been faster with other cars, can anyone beat this???
@noname2242
18 күн бұрын
Every time I try to make something in Auto these days I end up burnt out, so no guarantees. That said, the supercharger update, if that actually comes out in my lifetime, might motivate me to make something?
link to download would be nice..
I have a 6.285 second drag car 😮
a suggestion is to use fillman86's supercharger mod for all automation cars it allows you to put a supercharget plus the turbos you can put in from automation
@noname2242
3 ай бұрын
This was a very long time ago - that mod might not have even existed back then.
@ThatOneAviationEnthuiast
3 ай бұрын
@@noname2242true
@ThatOneAviationEnthuiast
3 ай бұрын
@@noname2242 I also tried making a custom drag car in automation but the module engine plugin doesn’t work anymore with the current version
whats the MOD
What chassis did you use
@noname2242
8 ай бұрын
No idea - it's been a year, and I don't think I still have the file to check.