Where do you purchase panels like that to install?

@SebastiaanMollema

2 жыл бұрын

I-wood lijnm.com/houten-wandpanelen-latjes-whitewash akupanel woodupp.nl/

@angelmesa535

2 жыл бұрын

Is there a place within the U.S ? California?

@EdurtreG

2 жыл бұрын

@@TzoeLife305 you can email or call. I am sure they can give you info in English. Due to the length of the product transportcosts will be pricey. It is a Danish product. It is a MDFpanel routed out with in between 3 mm thick felt from recycled materials so it is quite sturdy but also meant to control sounds. Did you watch their video? That is in English.

@hernebaybob

2 жыл бұрын

@@SebastiaanMollema

Whats awesome is that the door is hidden and that space is used, wow, excellent

😍love that wall💯

Hi all enjoy this video on this slatted project! Next episode will show more trim details and finishing!

Great video+explanation+presentation! Thank you SO MUCH for sharing your knowledge! Well done mate - NEW SUB 🙏🏻

you can make it with wood glut plans

Looks good, I like the idea of hiding the extra space.

@SebastiaanMollema

2 жыл бұрын

Thanks man!

Lovely

Wow

well hello! First video I've seen and so far I'm loving. My type of channel. New sub here.

@SebastiaanMollema

2 жыл бұрын

Thanks man!

Looks great! An idea: how about if you leave a full lenght panel on the door so you can't see the cut? Would hide the door even more.

@SebastiaanMollema

2 жыл бұрын

yes thats also great

@ackec-umsekkruch-ekucki952

2 жыл бұрын

You'd need to cut it below the ceiling though anyway. The full length panel would catch the ceiling. Most importantly, it would warp over time as it wouldn't be fixed to the wall. Very good thinking though and would've been very nice indeed if the material itself allowed it.

Amazing! It looks great and the door feature it very clever and interesting. Did you use a TIP-ON?

@SebastiaanMollema

2 жыл бұрын

Hi cris! Thanks, means a lot. Yeah its a blum tip-on with magnet. I would not use it for a door to another room but for closets or cabinets its sufficient. The hinges are regular bur i do adjust them to fit in-between the paneling.

nice vid

Hi, nice work. I wonder hiw far you could open the door with the panels installed? Could you open them further than 90 degrees? Seems unlikely as on the hinges side it would pinch where tge panels meet.

Hi there, i'd like to do the same project so i was wondering what kind of glue you use to stick those panels up on the wall? Thanks, nice work!

Good work! What backing did you use? The black part?

What hinges do you use so that the door slats when opening doesnt touch the wall panel slats.

I would like to know what material black did you use for the background of wood.

I would appreciate sound comparison with and without the panels

Great video! Few questions guys to anyone that can help. 1- When cutting a reveal, I’m finding it super tricky to not splinter the veneer. I’ve tried everything and came to this video specifically to see how you cut around plug sockets. I’ve tried mounting the socket to the paneling but you can see behind the socket when looking down the slats… so this isn’t an option. We have mounting boxes available in the uk also, tempered to use these if I can’t find and easier way to do it. 2- Is there a particular blade to use on the jigsaw that would help not chip the veneers?

Fantastiese werk. My Amerikaanse man dink ook dit is wel gedaan.

@SebastiaanMollema

2 жыл бұрын

He dankjewel

Stunning! Really elegant. May I ask why you cut the bottom skirting off and then put it back on? Thank you for sharing!

@SebastiaanMollema

2 жыл бұрын

Thank you! We cut something else off. The length of the panels started off shorter than the ceiling. I understand why you saw it like that.

Nice video and home, congratulations! :) Where I can buy these panels?

Great video, can you make the aku panels yourself?

Lovely work. Did you use regular common black door hinges or are they special? How much additional spacing between slats to provide clearance?

@SebastiaanMollema

2 жыл бұрын

Yes these are black, regular types. The space needed is 16 mm or 5/8” . Then it works out good enough.

looking really great. The only point I didn‘t understand ist why you haven used hidden hinges. Just a little bit more expensive.

@SebastiaanMollema

2 жыл бұрын

I got an explaination of this in another comment, it doesn’t fit well in short. The hinges do not allow a setup like this.

hi, moet je de latten gebruiken bij de deur? of heeft dat te maken omdat je de kabels erachter wilt verwerken?

Liked - Subscribed - Dinged!

@SebastiaanMollema

2 жыл бұрын

Thanks Cheers!

Looks great, have tried doing the same with secret hinges but the slats touch each other and give a relatively narrow opening. Any specific hinges you recommend to facilitate at least a 90 degree opening please? Thank you

@jcs3330

8 ай бұрын

Pivot hinges

Hi, wat voor deur scharnieren heb je gebruikt? wij hebben een plaat dikte van 22mm. Gr Kim

Hello, I couldn’t tell from the video but are you screwing the panels to the furring through the felt or through the slats? Thank you, looks way more professional than many of the other videos I have seen!

@SebastiaanMollema

2 жыл бұрын

Hi Pete, thanks. I screw and nail through the felt part. This works but the glue is also relevant for stability.

You remind me of Tom Green!

@SebastiaanMollema

2 жыл бұрын

ha thanks

What size wood did u add to the wall?

What hinges are these

I would rather have the line above the door to run across the length of the wall to give semblance of deliberate design and divert focus from the door

What are the dimensions on the wood that you attach the panels to?

Where can I buy the push open door latch?

What kind of hinge did you?

De que material es el fondo negro?

Looks great 👍 did you also install the hidden door? If so, why didn’t you choose invisible door concealed hinges?

@SebastiaanMollema

2 жыл бұрын

Hi thomas! This is interesting. I have made a sample of the setup with invisible hinges. But it won’t work on the long term, they will seize up and interfere with the cladded panels. The fulcrum (theorethical) is too close too the door face. And the regular hinges have a fysical fulcrum furter away from the door face. So those will not interfere with the cladding. For instance the ‘argenta’ brand hinges specify they allow 4mm thick door cladding but these panels are 16mm so that is too thick. This is a great question!

@thomasweber1397

2 жыл бұрын

@@SebastiaanMollema I was thinking about using the Tectus concealed hinges by Simonswerk for the door to my server room.

Just checked your videos, I only see the barn door you made... How did you make this one? What type of wood?

можно было сделать до потолка кусок на дверях они ж наружу открываютса

This is amazing Sebastiaan and Thank You for the video. Question for you, did you used screws and put it in the "black" part of the panel or just finishing nails into the oak wood?

@scruffygit771

11 ай бұрын

Black part 2:48

Hi Sebastian, pls can you tell me how did you fixed the sleds to the black back panrl? From behind with screws? Or just a fixing glue? Or some other method? Thanks for shating

@SebastiaanMollema

2 жыл бұрын

The panels come with slats and backing and all. and this is glued and screwed to the wall of firring.

It looks great! But What’s the material of the black backing wall and the wood slats?

@SebastiaanMollema

2 жыл бұрын

Thanks! The black in between is felt. The plastic type. Not the cotton type.

How did you make the custom door?

Welke snapper hen gebruikt ? Mijn deur is 38 mm dik en met stiften van blum kom op 37 mm kan ik geen vingers tussen krijgen

Im trying to do this in the next few weeks. What is the name for the pop off latch that you have used?

@SebastiaanMollema

2 жыл бұрын

This is Tip-on by Blum. You can search that.

Why are you using a blue pencil?

I want an easy solution, to use the door space on the wall, a wall paper covering door AND wall around, any ideas, suggestions ?

@SebastiaanMollema

2 жыл бұрын

Thank you Bea, well make sure the wall and door are in te same plane and then apply the wall paper cover. This will make it nice.

For the slats at the door, instead of door height why cant it goes all the way to the ceiling?

@SebastiaanMollema

2 жыл бұрын

It can but budget/leadtime is not infinite. It is possible to make floor to ceiling doors but price will give a trade off at some point.

What type of panels are those, and how much cost one?

@SebastiaanMollema

2 жыл бұрын

I-wood and they have the price online. Woodup also is a product and has theor price online (also check delivery)

can these be screwed into a plastboard wall without fixings if so what screws should i use thanks

@SebastiaanMollema

2 жыл бұрын

yes but use adequate glue.

@SebastiaanMollema

2 жыл бұрын

Regular screws work, but placing them in the studs is key and a High Tack glue is good

I wonder how you did made these panels?

@SebastiaanMollema

2 жыл бұрын

These are a bought article. So you can get them online. These is a pinned comment.

Is this real wood even panel at back or ply wood with wood finish cause that is garbage or mdf. If real wood panels then what is the source suppliers?

@SebastiaanMollema

2 жыл бұрын

Its an veneer on mdf, here in NL we have specialty local suppliers. They might ship it. This product is Iwood from danmark.

Where is the part 2?

Sebastiaan, hoe ver kan die deur open. Raken de latjes elkaar niet bij het 'ver' open doen?

@SebastiaanMollema

2 жыл бұрын

90 graden, ja op een bepaald punt gebeurt dat

@SebastiaanMollema

2 жыл бұрын

Met volledig op maat gemaakte schanieren kan het ondervangen worden maar 90 graden is afdoende voor de situatie.

What are the dimensions of the vertical chopsticks , and verry good job by the way

@SebastiaanMollema

2 жыл бұрын

These are 32x16mm or 1 1/4 and 5/8. But this is a panel so its premade in a factory.

@marijajevdjenovic2768

2 жыл бұрын

@@SebastiaanMollema And what is the width of the gap between them? Great job

is that wood looking plastic panel (wood panel) or real wood?

@SebastiaanMollema

2 жыл бұрын

This is an oak veneer on Mdf carrier. The felt is inbetween. Different brands have similar constructions like this.

It seems you’re using panels on the wall. Are you buying these from somewhere or are you fabricating them yourself? Not clear.

What is that dark material behind wood pieces?

@SebastiaanMollema

2 жыл бұрын

That is a plastic type of felt

where did you buy the pre fab product?

@SebastiaanMollema

2 жыл бұрын

see the pinned comment. I-wood lijnm.com/houten-wandpanelen-latjes-whitewash akupanel woodupp.nl/

Nice work! Where can I find these panels in the USA (California)?

@SebastiaanMollema

2 жыл бұрын

thanks! there is a pinned comment on that. Also search woodupp and acupanel.

@shawnhossini3321

2 жыл бұрын

@@SebastiaanMollema Thanks for the reply Sebastiaan! I could not find the pinned comment? Could you point it out to me. And when you search them on the web, they refer to companies abroad. Do you know of any companies that sell these or similar here in CA or USA? Thanks!

@SebastiaanMollema

2 жыл бұрын

​@@shawnhossini3321 Yeah thats a bit difficult then. No unfortunately I am only aware that woodupp is selling international. But not to North Amerika I understand now. acupanel woodupp.co.uk/ I-wood i-wood.dk/ lijnm.com/houten-wandpanelen-latjes-whitewash

@shawnhossini3321

2 жыл бұрын

@@SebastiaanMollema Thanks

I can’t find the link to l-wood. Can you provide?

@SebastiaanMollema

2 жыл бұрын

This a website where they sell it. It is dutch but they happily send it to you. lijnm.com/houten-wandpanelen-latjes-iwood-naturel

Can the door be opened from the other side?

@SebastiaanMollema

Жыл бұрын

Unfortunately not.

@lumikiller

8 ай бұрын

Can you use magnets to keep the door closed?

That door downstairs: how many degrees can it open without breaking the slats?

@SebastiaanMollema

2 жыл бұрын

The door stops at 90 degrees. The panels and wood stays undamaged it only stops the door. Luckily nothing gets pinched.

You must of paid a nice few bob for the panels, looks very good 👍 👌

@SebastiaanMollema

2 жыл бұрын

Yeah its a good nice product!

@earthsgard

2 жыл бұрын

@@SebastiaanMollema I've a job coming up with one in oak, looking forwards to doing it, 👌 nice video 📹 👍

not led ((

❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤❤😂😂😂😂❤

Is dit in Eindhoven?

@SebastiaanMollema

2 жыл бұрын

Nee utrecht en omstreken

@MadebyArt_Ehv

2 жыл бұрын

Oh hebben ze daar ook al van die gekleurde gevels..

@SebastiaanMollema

2 жыл бұрын

@@MadebyArt_Ehv dit is een nieuw wijkje naast een oude. straatnaam kan ik niet noemen hoor. Maar ik vind het er erg leuk uitzien.

meow

@SebastiaanMollema

2 жыл бұрын

Haha