Love the creativity and ingenuity!! Keep up the good work and keep pumping out awesome content!! Would love to wheel with you some day!

That bouncer sounds crisp🤟🏻

@dexjs

Жыл бұрын

Absolutely should for what I got in it 😆

Great content as always man going to hawk pride Saturday to test that new transfer case i got from you hope to see ya there!!!

@dexjs

Жыл бұрын

Awesome. Glad I can help out. I know I’m frustrating to deal with being busy lol.

Good advice having shafts in then tacking the spiders. When we welded spiders we torched them up a bit before welding. Not sure if that really helped but we were not even as hard on our d 30 as you are. I had a g2 cover long time ago that leaked like crazy and cracked in a spot on the bottom. I have a couple cheap Solid covers that seem to take a beating just fine and dont leak. I bet those spiders will hold. Not a bad idea to encase it anyways. If something cracks off in there it may save detonating everything else.

@dexjs

Жыл бұрын

Yeah I didn’t do it once and nearly had to throw it away. It was that warped. Yeah I’ve got all my stories on G2. Best one is they told me the ring gear wasn’t hub centric. It centered with the bolts. I was shocked.

@elev8j10

Жыл бұрын

@Dex Jeeps Wow. Well keep up the videos. Enjoy watching em. Can always learn something new on them xjs.

I always thought it was common practice to red loctite ring gear bolts🤷

@dexjs

Жыл бұрын

Haha for my style it is.

Red lock tire those bolts for sure, awesome video🤙🏻

@dexjs

Жыл бұрын

Thank you sir..!

Keep up the good work Dex. Your videos are great. I love the sarcasm. And straight to the point

@dexjs

Жыл бұрын

Thank you for the support..!

Keep up the vids Dex! Love seeing your process.

@dexjs

Жыл бұрын

Means a lot hearing that. Thanks much. I’ll get better I hope.

Some people plug off the holes and fill the whole diff with hot lead...

Fabrication Fantastic

Great content man keepem coming !

@dexjs

11 ай бұрын

Thanks! Will do!

Thrust washers is the term you were looking for

Good tips!

I'm a heavy equipment welder I rebuild buckets and your welds are fine you should see the booger welds that have been holding them together for the last 15 years or so

@dexjs

Жыл бұрын

Yes they could be better, I don’t claim to be a welder at all, but there sure seems to be alot of internet “experts” on here lol..!

@seantbr2019

Жыл бұрын

@@dexjs lol they are fine they'll do the job

Bro you were rolling, well until you weren't, I am still curious what those tires would do on the ledge most all struggled on.

@dexjs

Жыл бұрын

There will be a video coming out soon, I climbed a hill that I prolly shouldn’t have climbed, so yes I believe they are hooking for sure..!

Hell yeah! Let us know how she holds up

Yeah man i always red locktite ring bolts, flywheel bolts, distributor driven oil pumps bolts ect. I bet that diff gained 3 lbs. Lol. That looks pretty damn stout. Veey entertaining as i eat dinner. Now to go work on a hp dana 30 im swapping in a 5.9 zj

@dexjs

Жыл бұрын

Yep yep. I see them loosen up all the time. Haha I didn’t weigh it but it best hold up. Lost a money race

Pleeeease do not change the intro music ! It'll be a period historic piece man :)

Thank you for sharing.

@dexjs

Жыл бұрын

Thank you for following along!! Hoping to get some more educational videos out there.

Hi Dex, Michigan loves the content!! ?- when U talked about the CV shafts p#ch8220 &8221. Can I run those in my HP D30? As long as I get the correct output spline count? Cause I don't hve ABS? Oh... Plus I'm doing the WJ Knuckle swap,for bigger brakes. Thank U jasonC from Michigan

@dexjs

Жыл бұрын

Yeah man just direct swap. No modifications needed at all.

Love the video man , btw can you explain what u mean by bouncin the rev limiter ? and are you running a stock 4.0 ? if so how do you have so much power ? and whats your prefered gears n tire match ? ty bigtime you are the best and love the intro who ever did it :)

Could have just put a Yukon Grizzly locker and been done with it.💪😁😁

@thelonewrangler1008

Жыл бұрын

Or you could weld some scrap metal together and use the $800 for a pair of tires instead

@dexjs

Жыл бұрын

I like the way you think sir..!

Why is your radiator in the back seat?

I'm subed!

I gotta question an I'm stuck on it

I have a 97 grand Cherokee 2WD . How hard is it to convert it to 4wd I know tranny , transfer and front axle. My question is . Does the frame have provisions for a front axel install

@dexjs

Жыл бұрын

Dang good question. Full video is soon. It’s actually quite easy for a vehicle.

Thanks for videos, but please work on slinging the camera around. Very distracting.

What jeeps have a straight front 4.10 axles

@jeremyjohnson7031

2 ай бұрын

Most 4 cylinders had 4.10

Nice

What gears are y’all running in your trail rigs. I’ve always heard no lower than a 4.56 in a d30

@dexjs

Жыл бұрын

Everyone except for one is stock 3.55.

Can u not put a spool in it?

@51-FS

Жыл бұрын

Lol spoke to soon

@dexjs

Жыл бұрын

Do they make one?

@51-FS

Жыл бұрын

I donk know of they make them for jeeps. That's something you should ask dex. I know they make them for a ford 9 inch. Lol thats what I run in my stock car

@51-FS

Жыл бұрын

Them are kinda expensive for the jeeps. I get mini spools for like 30 bucks for the stock cars