Thanks for watching this video! I would appreciate it if you subscribe and like this video! :) You can contact me on instagram @ehdr_model_airport_
Жүктеу.....
Пікірлер: 119
@weaselsworld Жыл бұрын
I know it's 4 months later, but I can't help seeing those 3D prints and just about crying, knowing that printer can do so much better with a little tweaking! Still, thanks for sharing the journey. This stuff is right up my alley!
@model.aviation
Жыл бұрын
I’ve indeed did some tweaking and print quality is great now!
@supermilo9 ай бұрын
Additional requirements: spare room to put it in, very VERY patient wife and kids
@diy_finn4 ай бұрын
Amazing video! This is just like how I started my home cockpit build. Experiment with smaller stuff and then move on to the bigger stuff. Can’t wait for the next update!
@Prestidigitad0r Жыл бұрын
Please continue this series! I really enjoyed the video, although I was very confused when you started doing a lot of work for an aircraft with different cockpit hahaha
@model.aviation
Жыл бұрын
I was confused myself as well 😂 Episode 2 is in the making ;)
@Toemmer787
11 ай бұрын
Its been 10 months is it going well? Im trying to make a home cockpit myself and really love your video!
@model.aviation
10 ай бұрын
@@Toemmer787So it’s still in the making, with some minor delay. But stay tuned!
@justasphere.9850
8 ай бұрын
@@model.aviationis it done yet?
@loljack-hm4bh
7 ай бұрын
@@model.aviation i have a question. How many a 3d printer cost
@challengergaming1583 Жыл бұрын
dont give up the end result of your hardwork will probably be insane
@model.aviation
Жыл бұрын
Love to hear that!! I’m very excited to see how it’ll look in the end
@jacobemery8689
Жыл бұрын
@@model.aviation have you completed it ?
@theheathrowfan Жыл бұрын
Amazing video 🤩 😁. Can't wait for episode 2 😁😁
@model.aviation
Жыл бұрын
Thanks a bunch!! I cannot wait either 😃
@martinmery8080 Жыл бұрын
Great project!, im waiting for the next part!
@model.aviation
Жыл бұрын
I can't wait either ;)
@christopherefird1517 Жыл бұрын
It's all about the little goals!!!! I'm about to start my own A320 home cockpit, so I look forward to seeing more of your videos, and maybe we can share some ideas!!
@model.aviation
Жыл бұрын
Awesome! I’m currently looking for the right dimensions so I can start designing. Do you know where I can find them? Thanks for the support :)
@theopgamer4422
Жыл бұрын
@@model.aviation umm you need panels or something? I Can give you the stl files for it
@theopgamer4422
Жыл бұрын
@@model.aviation you can tell me whatever you need i have most of the stuff for a320. I have been modifying them for my a380 cockpit
@ulisescarranza9314
Жыл бұрын
@@theopgamer4422 Hi, I am interesting in the files. Where I can get it? thanks
@fsxnico Жыл бұрын
Good luck! It's a big task but "the journey is the reward", enjoy it.
@model.aviation
Жыл бұрын
I love to hear that! Thank you so much! :)
@irishbigdan38 Жыл бұрын
Keep making videos. I really want to make an A320 home cockpit someday. Just got to convince my wife
@model.aviation
Жыл бұрын
Hahaha! The project is currently on hold but I’d love to continue soon…
@KSOULJA114 Жыл бұрын
Yeah we're waiting brother, Damm the models 🤣 Andiamo 🤪💛⚡
@model.aviation
Жыл бұрын
I'm sooo incredibly busy right now, I will continue the build as soon as I can find some time :)
@jan_the_man Жыл бұрын
Nice man, ik ben benieuwd hoe dit project wordt vervolgd
@ultragamerguys Жыл бұрын
Tof!! Ik ben ook begonnen, heb nu een normale 3d printer en een resin printer. Eerste resultaten wat betreft knoppen printen met een resin printer zijn echt geweldig!
@ultragamerguys
Жыл бұрын
Ik heb voor de 737 gekozen, er is gewoonweg veel meer info beschikbaar, ook zijn er al veel 3d items gemodelleerd
@model.aviation
Жыл бұрын
Heel gaaf! 3d printen is super handig en accuraat, echt top! Ik ben momenteel niet heel druk bezig met de cockpit, dus ik zit nog steeds te twijfelen tussen 737 en 320, omdat er over de 737 echt heel erg veel meer te vinden is inderdaad
@CitrusAviation Жыл бұрын
Great video! I would really like to do something this for the ERJ-145XR as I dispatch these aircraft for the airline I work for.
@model.aviation
Жыл бұрын
That’s amazing! It’s a very fun project, but I don’t know how easy it will be for a less known/popular aircraft
@CitrusAviation
Жыл бұрын
@@model.aviation It shouldn’t be too challenging. I can actually get a lot of information and measurements from the corporate manuals I have access too. I really though beed to learn about proper wiring and electrical technics before I start though.
@model.aviation
Жыл бұрын
@@CitrusAviation That's lovely! Wiring isn't too difficult, but I'm not sure whether there are many programs that support the ERJ-145XR so you can link the switches to the simulator...
@CitrusAviation
Жыл бұрын
@@model.aviation Ok, I’ll look into how to wire and set up the switches directly to the software.
@lucaslikesaus Жыл бұрын
amazing
@captaintango Жыл бұрын
As you are mentioning using the Fenix A320 you might want to think about how you plan to connect your hardware (especially the custom parts) to the sim. I believe there are lots of controls Fenix doesn't give you access to. Not sure about the Fly by Wire A320 as I am still using P3D with my home cockpit, so that might be a better option (assuming you want to stay with MSFS 2020). Good luck with the project!
@model.aviation
Жыл бұрын
Thank you! :) I checked this, and the Fenix 320 does not give access to all controls. I don't think the FBW gives access to all controls in Mobiflight, which I just checked. I'm still considering staying with the PMDG 737, though it's much more complicated...
@captaintango
Жыл бұрын
@@model.aviation Another aspect you might want to look into is how easy, or not, it is to display the various screens you would want in the cockpit (PFD, ND, MCDU, ECAM, etc ), especially if you want to run those off another computer. Please know that I am not trying to rain on your parade, just sharing some personal experience.
@model.aviation
Жыл бұрын
I love it that you think along! Any help is highly appreciated as I have zero experience myself. I have been looking into running the screens off USB, which should be possible, though I'm not sure whether the sim will be running anywhere near smooth if everything is connected
@captaintango
Жыл бұрын
@@model.aviation Feel free to contact me if you have any questions. I'd be happy to share my experience. Good luck with the project! Take it one step at a time. www.flightpathsimulation.club/contact-us/
@model.aviation
Жыл бұрын
Thanks a lot! I will reach out for sure! :)
@biswajitdalai2021 Жыл бұрын
i subbed and now you got 1000 subs!
@model.aviation
Жыл бұрын
Thanks so much!! 🙏🙏
@biswajitdalai2021
Жыл бұрын
@@model.aviation btw can i get shoutout?
@Nu_815 ай бұрын
How did you get the labels on the Button Box for Master caution, IRS, and so on
@DeadlyGx Жыл бұрын
Hi, Love the video just wanted to ask how you got the primary flight display on a different monitor?
@model.aviation
Жыл бұрын
You can pop out the panels in MSFS and drag the panel to another monitor
@traveltr910 Жыл бұрын
Hi! You mentioned in your video you started with the basics (the light box), can you recommend a video or search term so I can start at that phase?
@model.aviation
Жыл бұрын
Button box arduino - it gives you some great recommendations
@xenon-aeronautical Жыл бұрын
Hi I have a question, where did you get all the measurements from? I have been trying to get measurements for an A320 cockpit for the past 2 weeks and I would appreciate it a lot if you could help out. Amazing video nonetheless. Cheers!
@model.aviation
Жыл бұрын
I have not yet found any A320 measurements. When I find them I’ll let you know!
@Skillissue-_- Жыл бұрын
This will be a long journey but it will be fun
@model.aviation
Жыл бұрын
For sure!
@xenon-aeronautical Жыл бұрын
What 3d printer do you use and do you recommend it? I am just thinking of getting a 3d printer soon.
@model.aviation
Жыл бұрын
I use the Ender 3 V2, I’d recommend it. There are plenty of reviews out on KZread!
@theseventhplane79 ай бұрын
you can do this !
@Pilot_legend7 ай бұрын
When’s episode 2 coming out
@tobiaspospisil80726 ай бұрын
Můžu se zeptat kde berete všechny ty dílý a kolik takový cockpit stojí
@The_Hydra Жыл бұрын
Anywhere you can get materials for the A380 or A350? It’s my dream to have a home simulator of one of these planes.
@model.aviation
Жыл бұрын
I’d say the best way is to create them yourself… Making a sim isn’t a short them process :/
@FtanmoOfEtheirys Жыл бұрын
#TeamAirbus
@MikeAW20106 ай бұрын
Boeing ended up hiring this guy.
@thelespauldude3283
3 ай бұрын
Source?
@cre8ive34 Жыл бұрын
I'm not real familiar with 3d printing but some of those prints look pretty rough to me. I've seen other people make things in the past on KZread and the prints jist required some light sanding to get smooth. Is this due to the 3d printer quality? Serious question, I really don't know and would like to learn more about 3d printing. Good luck on your journey, I subbed to your channel.
@model.aviation
Жыл бұрын
Hi, I love to hear that. The print quality is mostly dependent on how you level your printer bed, and my bed isn’t level 100% perfect, so the print quality isn’t optimal therefore. I have printed high quality prints in the past thanks to the bed levelled perfectly, but levelling each and every time I get tired of 😂
@Im_Asra
Жыл бұрын
@@model.aviation you might want to mess around with the temps as well i see some curling on the edges of your prints. most of them i feel wont matter because its hidden inside some frame but still
@model.aviation
Жыл бұрын
@@Im_Asra Thanks for that tip! Definitely something to take into account as well which I haven't thought of
@mr.vaggelis146 Жыл бұрын
I have a question, What program do you use to design all those panels/cockpit and what is a good way that I can learn how to design panels like these too.
@model.aviation
Жыл бұрын
I use fusion 360 (free), here a link to their site: www.autodesk.com/products/fusion-360/overview?term=1-YEAR&tab=subscription Really fun tool, you gotta learn it but once you get it you can design anything!
@mr.vaggelis146
Жыл бұрын
@@model.aviation Do you have any good tutorial for learning it?
@model.aviation
Жыл бұрын
@@mr.vaggelis146 Not in particular, there are several video's out on youtube of an hour long in which you get the basics
@erdalozturk2879 Жыл бұрын
When will you publish episode 2?
@model.aviation
Жыл бұрын
When I'm finished building a next part! I'm not sure when that is...
@CooperFHorn10 ай бұрын
I really wanna do something like this but all the Eletronic stuff and wires is looks super complicated.
@Coloma_Dj9 ай бұрын
Part 2?
@goatsxfc Жыл бұрын
🇳🇱🇳🇱
@ardennenwijzer25839 ай бұрын
Gaat geweldig worden. Wat is het kostenplaatje als die klaar zal zijn, als ik vragen mag ;-)
@model.aviation
9 ай бұрын
Geen enkel idee. Project staat nu al een tijdje op pauze, maar wil het snel weer gaan oppakken 😊
@petrnovak47604 ай бұрын
Please, next episode
@jeroendevries7825 Жыл бұрын
Hi welke 3d printer gebruik jij?
@model.aviation
Жыл бұрын
De Ender 3V2, wordt in de video behandeld :)
@ShamrockPlays_YT4 ай бұрын
how much didi this hole thing cost in total?
@myran1257 Жыл бұрын
Hey, I also want to have a home simulator setup and I would like to know where you got the files and dimensions for the cockpit of the A320 and other models.
@model.aviation
Жыл бұрын
Hi, I’ve got some Autodesk Fusion 360 designs of the cockpit. Would those be helpful? If so, I can send them to you via email
@myran1257
Жыл бұрын
Sure, but are there any other models other than A320s?
@model.aviation
Жыл бұрын
@@myran1257 There sure are, but I don't have them, or know where you can find them
@myran1257
Жыл бұрын
@@model.aviation ok thanks
@AvgeekNL17
9 ай бұрын
@@model.aviationhoi, ik ben ook best geïnteresseerd in een thuiscockpit maken en de bestanden die u heb gebruikt zouden voor mij ook heel handig zijn. Ik kijk uit naar de volgende video!
@samarthraman62873 ай бұрын
Can i build a 787/777 simulator (maybe only captain side) for under $12k?
@PAA583
3 ай бұрын
build I dont know. There‘s only one company building PnP B777 or 787 parts on this planet. FDS. Flight Deck Solutions.
@PAA583
3 ай бұрын
and you need software not cheap.
@liveincork6 ай бұрын
Where do I find the rest of the videos
@model.aviation
6 ай бұрын
They aren’t out… (yet)
@user-tn9xq2io9w6 ай бұрын
What 3d printer did you use?
@model.aviation
6 ай бұрын
The ender3v2
@diegamerpower Жыл бұрын
Hi how do you wire the grnd cabel?
@model.aviation
Жыл бұрын
I wire it from LED to LED and connect them all together, to end up with only 1 GRND cable in the Arduino. Understand?
@diegamerpower
Жыл бұрын
@@model.aviation Yes thx
@kristophermiller61609 ай бұрын
Any updates?
@model.aviation
9 ай бұрын
Currently I'm all into my model airport. I have plans for a 2nd episode, but haven't started executing those yet
@PAA5833 ай бұрын
Build a B777
@deizik89 Жыл бұрын
part 2 ?
@model.aviation
Жыл бұрын
Not in the making, if only it was....
@Huh730 Жыл бұрын
Hey hello it is me kan i kom langs maby i hou also from planes
@mitch_the_-itch11 ай бұрын
That is some horrid examples of 3d printing. You need to work on your slicer setup badly.
@model.aviation
11 ай бұрын
True, fixed it now. Much better :)
@mitch_the_-itch
11 ай бұрын
@@model.aviation Good news mate. Carry on ;)
@psane5 ай бұрын
I know a lot of work has gone into it. Are you sharing the model or STL files publicly?
@Nic13Gamer Жыл бұрын
Do you still need the correct dimensions?? I have a lot of it in these photos of a modern A320 (they are not mine ): drive.google.com/drive/folders/1ERtjP3BZC9VYvbraAhE_59patCefyHpr I am also making my own A320neo FCU, if you want, I can share with you some files and models that i made :)
@model.aviation
Жыл бұрын
Love your project! If possible, YES! Can you mail to axelholierhoek@gmail.com or share the link :) Thanks for you comment!!
Пікірлер: 119
I know it's 4 months later, but I can't help seeing those 3D prints and just about crying, knowing that printer can do so much better with a little tweaking! Still, thanks for sharing the journey. This stuff is right up my alley!
@model.aviation
Жыл бұрын
I’ve indeed did some tweaking and print quality is great now!
Additional requirements: spare room to put it in, very VERY patient wife and kids
Amazing video! This is just like how I started my home cockpit build. Experiment with smaller stuff and then move on to the bigger stuff. Can’t wait for the next update!
Please continue this series! I really enjoyed the video, although I was very confused when you started doing a lot of work for an aircraft with different cockpit hahaha
@model.aviation
Жыл бұрын
I was confused myself as well 😂 Episode 2 is in the making ;)
@Toemmer787
11 ай бұрын
Its been 10 months is it going well? Im trying to make a home cockpit myself and really love your video!
@model.aviation
10 ай бұрын
@@Toemmer787So it’s still in the making, with some minor delay. But stay tuned!
@justasphere.9850
8 ай бұрын
@@model.aviationis it done yet?
@loljack-hm4bh
7 ай бұрын
@@model.aviation i have a question. How many a 3d printer cost
dont give up the end result of your hardwork will probably be insane
@model.aviation
Жыл бұрын
Love to hear that!! I’m very excited to see how it’ll look in the end
@jacobemery8689
Жыл бұрын
@@model.aviation have you completed it ?
Amazing video 🤩 😁. Can't wait for episode 2 😁😁
@model.aviation
Жыл бұрын
Thanks a bunch!! I cannot wait either 😃
Great project!, im waiting for the next part!
@model.aviation
Жыл бұрын
I can't wait either ;)
It's all about the little goals!!!! I'm about to start my own A320 home cockpit, so I look forward to seeing more of your videos, and maybe we can share some ideas!!
@model.aviation
Жыл бұрын
Awesome! I’m currently looking for the right dimensions so I can start designing. Do you know where I can find them? Thanks for the support :)
@theopgamer4422
Жыл бұрын
@@model.aviation umm you need panels or something? I Can give you the stl files for it
@theopgamer4422
Жыл бұрын
@@model.aviation you can tell me whatever you need i have most of the stuff for a320. I have been modifying them for my a380 cockpit
@ulisescarranza9314
Жыл бұрын
@@theopgamer4422 Hi, I am interesting in the files. Where I can get it? thanks
Good luck! It's a big task but "the journey is the reward", enjoy it.
@model.aviation
Жыл бұрын
I love to hear that! Thank you so much! :)
Keep making videos. I really want to make an A320 home cockpit someday. Just got to convince my wife
@model.aviation
Жыл бұрын
Hahaha! The project is currently on hold but I’d love to continue soon…
Yeah we're waiting brother, Damm the models 🤣 Andiamo 🤪💛⚡
@model.aviation
Жыл бұрын
I'm sooo incredibly busy right now, I will continue the build as soon as I can find some time :)
Nice man, ik ben benieuwd hoe dit project wordt vervolgd
Tof!! Ik ben ook begonnen, heb nu een normale 3d printer en een resin printer. Eerste resultaten wat betreft knoppen printen met een resin printer zijn echt geweldig!
@ultragamerguys
Жыл бұрын
Ik heb voor de 737 gekozen, er is gewoonweg veel meer info beschikbaar, ook zijn er al veel 3d items gemodelleerd
@model.aviation
Жыл бұрын
Heel gaaf! 3d printen is super handig en accuraat, echt top! Ik ben momenteel niet heel druk bezig met de cockpit, dus ik zit nog steeds te twijfelen tussen 737 en 320, omdat er over de 737 echt heel erg veel meer te vinden is inderdaad
Great video! I would really like to do something this for the ERJ-145XR as I dispatch these aircraft for the airline I work for.
@model.aviation
Жыл бұрын
That’s amazing! It’s a very fun project, but I don’t know how easy it will be for a less known/popular aircraft
@CitrusAviation
Жыл бұрын
@@model.aviation It shouldn’t be too challenging. I can actually get a lot of information and measurements from the corporate manuals I have access too. I really though beed to learn about proper wiring and electrical technics before I start though.
@model.aviation
Жыл бұрын
@@CitrusAviation That's lovely! Wiring isn't too difficult, but I'm not sure whether there are many programs that support the ERJ-145XR so you can link the switches to the simulator...
@CitrusAviation
Жыл бұрын
@@model.aviation Ok, I’ll look into how to wire and set up the switches directly to the software.
amazing
As you are mentioning using the Fenix A320 you might want to think about how you plan to connect your hardware (especially the custom parts) to the sim. I believe there are lots of controls Fenix doesn't give you access to. Not sure about the Fly by Wire A320 as I am still using P3D with my home cockpit, so that might be a better option (assuming you want to stay with MSFS 2020). Good luck with the project!
@model.aviation
Жыл бұрын
Thank you! :) I checked this, and the Fenix 320 does not give access to all controls. I don't think the FBW gives access to all controls in Mobiflight, which I just checked. I'm still considering staying with the PMDG 737, though it's much more complicated...
@captaintango
Жыл бұрын
@@model.aviation Another aspect you might want to look into is how easy, or not, it is to display the various screens you would want in the cockpit (PFD, ND, MCDU, ECAM, etc ), especially if you want to run those off another computer. Please know that I am not trying to rain on your parade, just sharing some personal experience.
@model.aviation
Жыл бұрын
I love it that you think along! Any help is highly appreciated as I have zero experience myself. I have been looking into running the screens off USB, which should be possible, though I'm not sure whether the sim will be running anywhere near smooth if everything is connected
@captaintango
Жыл бұрын
@@model.aviation Feel free to contact me if you have any questions. I'd be happy to share my experience. Good luck with the project! Take it one step at a time. www.flightpathsimulation.club/contact-us/
@model.aviation
Жыл бұрын
Thanks a lot! I will reach out for sure! :)
i subbed and now you got 1000 subs!
@model.aviation
Жыл бұрын
Thanks so much!! 🙏🙏
@biswajitdalai2021
Жыл бұрын
@@model.aviation btw can i get shoutout?
How did you get the labels on the Button Box for Master caution, IRS, and so on
Hi, Love the video just wanted to ask how you got the primary flight display on a different monitor?
@model.aviation
Жыл бұрын
You can pop out the panels in MSFS and drag the panel to another monitor
Hi! You mentioned in your video you started with the basics (the light box), can you recommend a video or search term so I can start at that phase?
@model.aviation
Жыл бұрын
Button box arduino - it gives you some great recommendations
Hi I have a question, where did you get all the measurements from? I have been trying to get measurements for an A320 cockpit for the past 2 weeks and I would appreciate it a lot if you could help out. Amazing video nonetheless. Cheers!
@model.aviation
Жыл бұрын
I have not yet found any A320 measurements. When I find them I’ll let you know!
This will be a long journey but it will be fun
@model.aviation
Жыл бұрын
For sure!
What 3d printer do you use and do you recommend it? I am just thinking of getting a 3d printer soon.
@model.aviation
Жыл бұрын
I use the Ender 3 V2, I’d recommend it. There are plenty of reviews out on KZread!
you can do this !
When’s episode 2 coming out
Můžu se zeptat kde berete všechny ty dílý a kolik takový cockpit stojí
Anywhere you can get materials for the A380 or A350? It’s my dream to have a home simulator of one of these planes.
@model.aviation
Жыл бұрын
I’d say the best way is to create them yourself… Making a sim isn’t a short them process :/
#TeamAirbus
Boeing ended up hiring this guy.
@thelespauldude3283
3 ай бұрын
Source?
I'm not real familiar with 3d printing but some of those prints look pretty rough to me. I've seen other people make things in the past on KZread and the prints jist required some light sanding to get smooth. Is this due to the 3d printer quality? Serious question, I really don't know and would like to learn more about 3d printing. Good luck on your journey, I subbed to your channel.
@model.aviation
Жыл бұрын
Hi, I love to hear that. The print quality is mostly dependent on how you level your printer bed, and my bed isn’t level 100% perfect, so the print quality isn’t optimal therefore. I have printed high quality prints in the past thanks to the bed levelled perfectly, but levelling each and every time I get tired of 😂
@Im_Asra
Жыл бұрын
@@model.aviation you might want to mess around with the temps as well i see some curling on the edges of your prints. most of them i feel wont matter because its hidden inside some frame but still
@model.aviation
Жыл бұрын
@@Im_Asra Thanks for that tip! Definitely something to take into account as well which I haven't thought of
I have a question, What program do you use to design all those panels/cockpit and what is a good way that I can learn how to design panels like these too.
@model.aviation
Жыл бұрын
I use fusion 360 (free), here a link to their site: www.autodesk.com/products/fusion-360/overview?term=1-YEAR&tab=subscription Really fun tool, you gotta learn it but once you get it you can design anything!
@mr.vaggelis146
Жыл бұрын
@@model.aviation Do you have any good tutorial for learning it?
@model.aviation
Жыл бұрын
@@mr.vaggelis146 Not in particular, there are several video's out on youtube of an hour long in which you get the basics
When will you publish episode 2?
@model.aviation
Жыл бұрын
When I'm finished building a next part! I'm not sure when that is...
I really wanna do something like this but all the Eletronic stuff and wires is looks super complicated.
Part 2?
🇳🇱🇳🇱
Gaat geweldig worden. Wat is het kostenplaatje als die klaar zal zijn, als ik vragen mag ;-)
@model.aviation
9 ай бұрын
Geen enkel idee. Project staat nu al een tijdje op pauze, maar wil het snel weer gaan oppakken 😊
Please, next episode
Hi welke 3d printer gebruik jij?
@model.aviation
Жыл бұрын
De Ender 3V2, wordt in de video behandeld :)
how much didi this hole thing cost in total?
Hey, I also want to have a home simulator setup and I would like to know where you got the files and dimensions for the cockpit of the A320 and other models.
@model.aviation
Жыл бұрын
Hi, I’ve got some Autodesk Fusion 360 designs of the cockpit. Would those be helpful? If so, I can send them to you via email
@myran1257
Жыл бұрын
Sure, but are there any other models other than A320s?
@model.aviation
Жыл бұрын
@@myran1257 There sure are, but I don't have them, or know where you can find them
@myran1257
Жыл бұрын
@@model.aviation ok thanks
@AvgeekNL17
9 ай бұрын
@@model.aviationhoi, ik ben ook best geïnteresseerd in een thuiscockpit maken en de bestanden die u heb gebruikt zouden voor mij ook heel handig zijn. Ik kijk uit naar de volgende video!
Can i build a 787/777 simulator (maybe only captain side) for under $12k?
@PAA583
3 ай бұрын
build I dont know. There‘s only one company building PnP B777 or 787 parts on this planet. FDS. Flight Deck Solutions.
@PAA583
3 ай бұрын
and you need software not cheap.
Where do I find the rest of the videos
@model.aviation
6 ай бұрын
They aren’t out… (yet)
What 3d printer did you use?
@model.aviation
6 ай бұрын
The ender3v2
Hi how do you wire the grnd cabel?
@model.aviation
Жыл бұрын
I wire it from LED to LED and connect them all together, to end up with only 1 GRND cable in the Arduino. Understand?
@diegamerpower
Жыл бұрын
@@model.aviation Yes thx
Any updates?
@model.aviation
9 ай бұрын
Currently I'm all into my model airport. I have plans for a 2nd episode, but haven't started executing those yet
Build a B777
part 2 ?
@model.aviation
Жыл бұрын
Not in the making, if only it was....
Hey hello it is me kan i kom langs maby i hou also from planes
That is some horrid examples of 3d printing. You need to work on your slicer setup badly.
@model.aviation
11 ай бұрын
True, fixed it now. Much better :)
@mitch_the_-itch
11 ай бұрын
@@model.aviation Good news mate. Carry on ;)
I know a lot of work has gone into it. Are you sharing the model or STL files publicly?
Do you still need the correct dimensions?? I have a lot of it in these photos of a modern A320 (they are not mine ): drive.google.com/drive/folders/1ERtjP3BZC9VYvbraAhE_59patCefyHpr I am also making my own A320neo FCU, if you want, I can share with you some files and models that i made :)
@model.aviation
Жыл бұрын
Love your project! If possible, YES! Can you mail to axelholierhoek@gmail.com or share the link :) Thanks for you comment!!
@Nic13Gamer
Жыл бұрын
@@model.aviation I have sent you an email :)