Building a Full Range Tower / Floor Stander Speaker - by SoundBlab
The first 1,000 people to use the link will get a 1 month free trial of Skillshare: skl.sh/soundblab08221
This 2-Way Stereo Floor Standing Speaker set was designed around a Mark Audio 4inch full range driver and a Tang Band 6.5inch subwoofer driver in a bass reflex enclosure. The goal was to have a speaker that will perform well above average when paired to good equipment with the advantages of a full range point source driver, supported by a subwoofer driver to give us that full sound we get from a speaker that can dig deep to 30Hz and extend all the way up to 20000Hz and beyond. We recommend that you use an amplifier that can handle a 4 Ohm load and is rated to produce at least 50 Watts per channel. When following this build plan, it can be built with everyday woodworking tools and by someone that has intermediate woodworking skills. The construction follows butt joints.
BUILD PLANS: soundblab.net/product/full-ra...
PARTS:
- Markaudio CHR-70 Full Range Drivers - (US) bit.ly/3EWtwQt , (EU) bit.ly/3vrR4JK
- Tang Band W6-1139SIF 6.5 inch Subwoofer Driver - (US) parts-express.sjv.io/LPADrM , (EU) bit.ly/3xcx4bI
- Pair of Terminal Cups - (US) parts-express.sjv.io/n1rn3R , (EU) bit.ly/2ZWcXDM
SUPPORT THE CHANNEL:
- SoundBlab Website and Build Plans - www.soundblab.net
- Patreon - / soundblab
- KZread Membership: / @soundblab
FOLLOW THE CHANNEL:
- KZread - goo.gl/EWMSXV
- Instagram: / soundblab
- Pinterest: / soundblab
- Twitter: / soundblabs
CHECK OUT MY AMAZON SHOP for recommended gear, tools, etc.:
- www.amazon.com/shop/soundblab
Audio Components & Solutions:
- Parts Express (US) - parts-express.sjv.io/yRNVk2
- Soundimports (EU) - bit.ly/3B0xWEn
- Axiomedia (EU) - bit.ly/3TUQUoA
Get Whole house audio via ARYLIC:
- www.arylic.com?aff=9
Music:
- www.epidemicsound.com/referra...
Пікірлер: 155
The first 1,000 people to use the link will get a 1 month free trial of Skillshare:
I built these in March of 24. This is my third build of SoundBlab's work and like the other the build plans these were very detailed and thought out. Here is my review of these floor standers. I built them to be nearly identical to the video. Possibly the best thing about them is the wife approval factor. It is a 10/10. They are really impressive looking speakers. Musically these are very detailed speakers. The low end is rather snappy and can really hit some deep lows. The high range is very accurate however is a bit fatiguing at high volumes. Where I feel these really excel are as a sound bar alternative for your TV. Voices are very clear and the detail of the top end really makes watching TV more enjoyable. Overall these are beautiful and produce a sound quality that is very pleasant.
I've always loved the look of edge plywood, made a dresser with the same construction. I also use that same Mark audio, one of favorites, took me a little work to get those topend peaks tamed to how I like them, I actually besides padding, slant the whole driver baffle back a good 15*
Nice work! I have a pair of Eikona 2 drivers that I bought about 4 years ago that might go well in this design with an enclosure volume tweak.
I am assembling components to build this speaker over the next few months because I really like the way you put together this video. It looks like it has lots of potential and I look forward to tweaking it once I have it in my listening room.
They r amazing...i hope these were in my house.and i can listen them for years
Very impressive look and wonderful sound (as best a KZread recording can show). Thanks for the video.
I really enjoy your videos! Thank You for what you do. 👍👍👍
Well done, inspiring as always!
From my guesstimating, the subwoofer is a ported 12L enclosure with a tune around 35hz. Maximum excursion is reached at 22 watts of input on the subwoofer, resulting in a fairly low SPL of 95Db per speaker. Could be nice for a small room.
I love watching these videos and I would totally make one of these IF I had a shop or the space to have a shop or the time to even use the shop if I had it. HOWEVER. I would order this kit in a minute if it was available. Regardless, love the time and effort dedicated to the build and to the production of the video.
The plywood cut was a great and new stile! Very nice!
Mr Blab has uploaded a new video, as an ex car audio (spl comps) guy i get really excited about these build videos. I really enjoy the time you put into each video, great work as always mate.
Зачёт! классный НЧ Tang Band W6-1139SIF 6,5-дюймовый драйвер сабвуфера
Now that is really a good looking cabinet!
Very nice, ply on edge is a interesting look .
Love the overtones at
Man they look and sound awesome. Great job
You're always build premium sound <3 I like it
Awesome! Love every minute of your project!