We need a submarine re-visit please, Matt. I was grinning like a school kid the entire video. It's just too awesome.

@ripdeyu

Жыл бұрын

SAME!! I smiled oh so very much when it went underneath the surface the first time!

@Gamer5_1.0

Жыл бұрын

me a school kid

@dnd5597

Жыл бұрын

Where is the revisit Matt? You know, with great powers comes the great responsibility of making another video on this >:D

@hotmailcompany52

Жыл бұрын

maybe its a complete redesign to make it cheap and easy to build :)

@vidhoard

Жыл бұрын

Agreed! I wanted to see it go in deeper water!

I'm enormously impressed with your ability to find parts that fit together with minimal modification.

@MarcAntoineBvl

2 жыл бұрын

I know right, how does he do that

@pinaz993

2 жыл бұрын

Plot twist: Matt is the heir to the Perspex empire, and can have acrylic parts made to order at a moment's notice.

@joko49perez

2 жыл бұрын

Lots of research

@dadsquatch79

2 жыл бұрын

@@VladIDrago wander away.

@CodeOptimism

2 жыл бұрын

This is my favorite as well. And my own personal style. I live in the country but one day uploading video won't be a PITA. 😂

I think the CEO of OceanGate believed in the DIY submarine a bit too heavily.

@jerometruitt2731

10 ай бұрын

I was looking to see who would be here because of that.

@armandourso5602

10 ай бұрын

@@jerometruitt2731 bro same

@Vedett7450

10 ай бұрын

hahah same

@amnbpavle8708

10 ай бұрын

Same ahahahha

@ucoder8905

10 ай бұрын

to soonnn

Has a more complicated controller for a homemade toy than ocean gate had for a craft holding 5 people

@NashTheInsomniac

10 ай бұрын

ceo watched a different youtube tutorial

@Official-Jesus-YT

9 ай бұрын

That's industry standard

@sabagecabage7828

9 ай бұрын

@@Official-Jesus-YTas is this controller in the video being industry standard in... whatever this industrys called lol

@planetmusic1104

9 ай бұрын

​@@NashTheInsomniacbro probably watched 5 min crafts

@cosmo8412

7 ай бұрын

@@planetmusic11041 minute panics

Those ocean gate engineers should pay close attention

@DaveSmith-cp5kj

10 ай бұрын

The issue was less the engineers and more the CEO who said he refused to hire white guys or military veterans. You could be a good engineer, but if your CEO is deliberately not hiring subject matter experts for a left wing agenda, you can do your best at your specialty but you just won't have the background to properly use your skills since engineering is not a comprehensive career.

@xMadMazx

10 ай бұрын

​@@DaveSmith-cp5kjnow the poor guys has deaths on their conscious just because their boss was a toush.

@cat-le1hf

10 ай бұрын

​@@DaveSmith-cp5kjHe was a right wing billionaire. That was his script so he could underpay people less who had lessons experience. He did not want to listen to anyone who told him no.

@DaveSmith-cp5kj

10 ай бұрын

@@cat-le1hf He was a left winger, not right winger. I've never heard of a right winger who refused to hire military vets or white dudes on the basis of skin color. Hating the military and being race obsessed is exclusively left leaning behavior. There was a report that claimed he was a right wing megadonor but it later was revealed that the article was just written to obfuscate his statements as the truth was he only donated in a local campaign in Texas in a small amount over two decades ago, and his motivation was likely more due to business than politics. Plus he basically spent his whole life in California and nearly all of his career in the most left wing areas like San Francisco. You aren't exactly going to find right wingers hanging around SF with all the drugs and legalization of theft. lol

@DaveSmith-cp5kj

10 ай бұрын

@@xMadMazx Yeah. Although I don't blame them, they did the best they could with dysfunctional leadership. And frankly the passengers can only blame themselves for not doing their own research. This guy apparently had to lower his price several times because no one wanted to get in it, that should have been a clue to the people who signed up that this wasn't a great idea. Lots of people were invited and most refused to sign on due to the obvious detachment from modern naval architecture.

Had so much fun working on this challenge! Can’t wait for our next collab and to release my video showing my ROV finally working perfectly! 😃

@DIYPerks

2 жыл бұрын

Same, it really was a blast! I'm looking forward to next time!

@andreasnguyen2540

2 жыл бұрын

Hey

@sobirock

2 жыл бұрын

@@DIYPerks We too are excited 👏

@ravibiswas1527

2 жыл бұрын

Take it to sea! On a sunny day

@aubinicoleau

2 жыл бұрын

@@DIYPerks It was a « ballast » !

Matt in 2047: "DIY moonbase with life support"

@dominus6695

2 жыл бұрын

lol

@dominus6695

2 жыл бұрын

2055: cryogenic chamber 2067: life extensor & time machine

@ukarmycadet

2 жыл бұрын

So apt

@kdawg3484

2 жыл бұрын

Way sooner than that. Hell, if he Cody and collaborated on it, they could probably have one in the next 5 years.

@lindalayman9589

2 жыл бұрын

add alien pet

I bet this is way more resistant that Ocean Gate sub

@Untitled166

10 ай бұрын

yea

@A_ARAFAT

9 ай бұрын

Agreed

@Sealanimations69

9 ай бұрын

True

@SubvertTheState

9 күн бұрын

Obviously not lol. The hydrostatic pressure at 3,800 meters (depth of Titanic) is 5,500 psi.

Now you're ready to go visit the Titanic.

@okamho

9 ай бұрын

😂

@rayyanipoo

7 ай бұрын

Hows life jerry

@kuroshite

3 ай бұрын

Not a very good idea

Stuck in bed rest, fighting a fever but after watching this, I just wanna get up and build something. People like you make life worth living.

@anasnajjar993

2 жыл бұрын

kzread.info/dash/bejne/ZnmhpbZyc87NZZM.html kzread.info/dash/bejne/Y6RsmLJrdNi8eNY.html kzread.info/dash/bejne/gINmyKeRmbe2hLQ.html ......

@derteater

2 жыл бұрын

Hope its not the rona

@kittyonemeow2

2 жыл бұрын

Hope u feel better soon!! 🤗

@k-osmonaut8807

2 жыл бұрын

Damn true, wish you better and good luck man

@articticcblu

2 жыл бұрын

@@2000jago wooooooooooooooooooooooooooooo

This aged well

@platinum8149

10 ай бұрын

@@ilikebeeswarm Jokes did too, look it up.

@MarqueeliusThe_III

10 ай бұрын

@@platinum8149W response

@XENTRE

9 ай бұрын

@@platinum8149bad jokes did too

@platinum8149

9 ай бұрын

@@XENTRE Shitty responses did aswell.

@XENTRE

9 ай бұрын

@@platinum8149 that wasn’t a shitty response

DIY Perks: "I've not done any calculations..." OceanGate: "You're hired!"

The plunger solution is brilliant but the whole project is outstanding

@AuxiliaryPanther

2 жыл бұрын

@MrHolyKindness real submarines can do this.

The timing of this video being recommended is impeccable

ngl, DIY Perks are one of those few youtubers who actually do what they put on their thumbnail and makes that so perfect that i could actually be sold to costumers.

So many youtubers underestimate the power of them explaining what they are doing as they do it. I made it 15mins in without thinking about it and rewinded multiple times to really comprehend what you were saying before being pleasantly surprised this was a 30min video. Big fan of everything you do and especially a fan of your knowledge and ability to explain and articulate. Definitely smashed that sub button.

It's hilarious how this is being recommended to me now

I'd love to see what I imagine to be hours and hours of planning, design, testing, and repeat to get to the designs that you've made videos on. This skill in itself is invaluable to aspiring creators/makers and all your videos completely skip over this step.

This looks like a spaceship. The part with the linear resistor is brilliant, an absolute 200 IQ move!

@wolf2403

2 жыл бұрын

no roll control tho

@spacegamer6906

2 жыл бұрын

@@wolf2403 why would you need roll control?

@seraphina985

2 жыл бұрын

@@spacegamer6906 In case the sub hits turbulent perturbations in the water that either messes with it's roll directly or even it's pitch (Operating either of the buoyancy controls in isolation will also cause roll as it lacks the counterrotating screw to balance the roll torque it produces).

@spacegamer6906

2 жыл бұрын

@@seraphina985 thanks, didnt know that

"I was a bit worried that it looked too much like a bomb..." "Next up, I will be filling up the clear plastic casing with four kilos of sharp metal pellets!" :D

@edwald4056

2 жыл бұрын

Lol

@gabrielathero

2 жыл бұрын

Damn you beat me to it XD I was gonna say that it looks like some kind of missile from star wars.

@marcosmoralesrodrigo9963

2 жыл бұрын

hahahahaha, this made me cry... so true!

@mcintoshdev

2 жыл бұрын

OMG, I thought he said BONG which reminded me of Harold and Kumar in "Escape from Guantanamo Bay!"

@LuisCasstle

2 жыл бұрын

Can't forget the shrapnel. 😅

Algorithm got that dark sense of humour with the recommendations.

This picked the absolute perfect time to pop up in my recommended lmao

DIY Perks will soon show us how to create a spaceship, DIY STYLE!

@BrentonWoods774

2 жыл бұрын

A BRASS SPACESHIP WILL LOOK SO SICK

@archivushka

2 жыл бұрын

And witheather handles and wooden finishing

@nicholaslau3194

2 жыл бұрын

space battleship

@Trondur

2 жыл бұрын

@@BrentonWoods774 Maybe he can team up with Matthias Wandel and get some wood in there too.

@ShakedKod

2 жыл бұрын

Indeed

Between yours, James and Peter's recent subs I think I need to finally get off my ass and make one to take off the coast. They look like such a challenging and rewarding project.

@Descension.

2 жыл бұрын

A verified less like comment? well that's rare..

@DIYPerks

2 жыл бұрын

That would be awesome! Would love to see your take on one!

@zafred6424

2 жыл бұрын

Lol

@Djayar

2 жыл бұрын

Yes, I'm your sub for long time, pls do it on your channel I would love to see it

@PaletoB

2 жыл бұрын

But why are they all releasing submarine videos now? It's literally freezing and 2 feet of snow here. 😂

OceanGate Inc furiously taking notes as we speak.

@AbsolutelyNotKirrim

10 ай бұрын

narcotic dealers taking notes:

Hey you. Yes you. I know you're looking for THOSE comments.

@_laloruiz_

10 ай бұрын

lmao

I remember thinking "I could make this if I had a soldering iron." Now he's making a submarine.

@SergeiSugaroverdoseShuykov

2 жыл бұрын

well, ts100 costs nearly nothing

@DemeDemetre

2 жыл бұрын

@@SergeiSugaroverdoseShuykov you can get a generic one

@phenomanII

2 жыл бұрын

It's a slippery slope. I also thought "I could make this if I had a soldering iron". Later I bought one. Then I thought "I could make this if I had a rotary tool". Ended up buying one as well. These days my go to excuse is "I could build this if I had the parts and materials". I refuse to buy electronic components and sheets of brass so that I don't lose that one. I'd rather blame the lack of resources than accept the lack of skill.

@someguy9175

2 жыл бұрын

@@phenomanII what did you made with all these tools?

@CarbonPanther

2 жыл бұрын

@@SergeiSugaroverdoseShuykov 100€ is "nearly nothing" to you?!

Is there some submarine build fad going on that I don't know about? Always love the clever engineering of this channel.

@corndoghead1

2 жыл бұрын

Ikr? 3 people i watch created subs now.. the lego sub,petersripol,now this Edit: the lego one is "Brick experiment channel"

@Benzene265

2 жыл бұрын

It’s a subconscious hint: Sub(scribe).

@Kevin-xy2tu

2 жыл бұрын

When the impending climate warming and rising sea happen, all this submarine knowledge might be useful

@rakesh.a.c

2 жыл бұрын

@@corndoghead1 rctestflight next?

@undefinedman2843

2 жыл бұрын

Sean hodgins you are here i am a die hard fan of you and your project specially those bunch of oled displays

I think a guy watched this video and is now trapped down with the titanic

This guy's creativity, problem-solving ability, knowledge and enthusiasm are outstanding. I enormously appreciate the effort he must put into making these videos and the sacrifice it implies in comparison to other youtubers who spit out new videos at least once a week. Thank you so much!

Can't wait till 2031 when you start making guides on how to build DIY Nuclear Reactors.

@BossToastMaker

2 жыл бұрын

Fingers crossed, he is the one that can helps us make homemade spaceships 👍👍

@David-Zita

2 жыл бұрын

haha

@bjk8kds

2 жыл бұрын

Cant imagine what diy tools/weapon he made when apocalypse happened

@TrickArrow

2 жыл бұрын

Using... you guessed it; brass!

@onezavalar

2 жыл бұрын

ha ha ha ha good one :D

Okay you can't convince me he isn't speedrunning his way to evil genius

@_sxmurxi_6015

2 жыл бұрын

He's doofinsmirtz in disguise...

@ciemny_awootism

2 жыл бұрын

Not so noticing lol

@rasaecnai

2 жыл бұрын

Matt would dominate the world with brass, leather and acrylic with some servos

@spygun0442

2 жыл бұрын

Today, submarine. tomorrow, a nuclear submarine.

@navidmehdi6

2 жыл бұрын

he is Gru

It is hilarious that this is being shown to me on the homepage 😂

Those billionaires should have watched your video before launching for the titanic

KZread is shady man... recommending this now😂

@adizzgamingyt8732

10 ай бұрын

Frrr

@_laloruiz_

10 ай бұрын

lmao same

The yellow submarine was more of like the "exploring" type of submarine used by researcher vessels. Whilst the one you made is a full fledge nuclear attack submarine haha

@IShowSpeedgang622

Жыл бұрын

kzread.info/dron/IrnqSOv3lSKzeEkper5u3w.html

@alexandervingisar

Жыл бұрын

0,3 лз з98дл8лл 98

@seeskabel4561

Жыл бұрын

nah its a controlled torpedo with a load of 4kg of tnt

@Motoxlight

Жыл бұрын

@@seeskabel4561 nsa has joined chat XD

@bluebacon393

Жыл бұрын

@@Motoxlight Do you mean U.S.A instead of NSA?

This is a long way since reusing laptop parts for other applications, the creativity in this channel is just absolutely awesome

@julikb

2 жыл бұрын

all videos are exelent.Treasure in youtube.Knolage,nice voice,systematic in all aspects...Genious!

I love the fact that every project he starts and puts it to work he has so much joy that it works Pure joy Very rare these days

KZread is FOUL for recommending me this lmao 💀

Honestly shocked we didn’t hear something like: “Now this first section here is for the ℙ𝕆𝕎𝔼ℝ ℂ𝕆ℝ𝔼. I’ll be using a small molten salt nuclear reactor that I’ve cobbled together from some leftover bits lying around the garage, but you could also get away with lithium batteries if you don’t have the supplies available.”

@Rundumsfliegen

2 жыл бұрын

One thing, (even if it has almost nothing to do with that) that crossed my mind reading that: miniature RBMK 1000. Underwater Chernobyl.

@IRMacGuyver

2 жыл бұрын

Gotta stockpile those old smoke detectors.

@Wha2les

2 жыл бұрын

Diy nuclear submarine. That would be a neat story at parties

@chrisperrywv

2 жыл бұрын

🤣

@seraphina985

2 жыл бұрын

@@IRMacGuyver This makes me wonder if you heard the story of teenager that actually did that and literally tried to build a small reactor. If not suffice to say they succeeded in contaminating the local neighbourhood. Probably not surprising considering that forcing a nuclear reaction of some kind isn't that difficult engineering a system to isolate, shield and get power out of it is harder.

Love the project. Can't wait for version two! Three suggestions: 1.) Use a sensor to determine if the sub is level and then you can automatically adjust the two boyancy motors. There is a good chance going faster or going against currents will alter your level. This can easily be done with a cheap rc flight controller. It's overkill, but cheap and easy. Someone know of a dedicated sensor? 2.) Instead of having separate sets of thrusters to rotate and also "slide" left/right, just use one set of four. Engage 2 on one side to "slide" and engage one on each side (front/back) to rotate. 3.) I love Mr. Gadget's idea of a periscope. However, a traditional one would be very complicated. You already have a floating periscope platform where your receiver is located. Mount a second camera/video-tx with the ability to rotate and you can really take advantage of the long range that your rc set-up allows. Plus you can look around without having to surface. Disguise the whole floating part as a lilly pad and you have a true watery spy craft!

@thequantumqbe_5474

2 жыл бұрын

Underrated comment, u could make a lily pad nuke! (Sorry I spend too much time in the r/Kurzegesagt subreddit XD)

@illegitimate0

2 жыл бұрын

If he gets an RC flight controller for quadcopters, it could easily be programmed to do both 1 and 2 automatically with the same controls he is using in the video. It can be set to have the left control stick left/right activate the opposite side thrusters, and the right stick left/right can have it turn the rotational pairs go automatically. He is already on 2.4 GHz too, so as an ecosystem it would make sense. I was already coming here to suggest brushless motors/propellers but his associate in the video already suggested it. These extra things don't cost him anything but money as well, since he has so much ballast in there already since it's huge.

Brilliant! What a marvelous first attempt! Would more batteries and larger thrusters be better as ballast? Let the additional mass work for its passage instead of 'deadheading.' :)

@boonjabby

2 жыл бұрын

Great idea! Bigger batteries allowing for more run time and more powerful motors. 🙌

@Helveteshit

2 жыл бұрын

@@boonjabby Don't think powerful motors is necessary. I think a slow cruise of underwater exploration is nice enough. I would rather have more Light.

@CosmicTeapot

2 жыл бұрын

​@@Helveteshit Having more power doesn't mean you HAVE to use it and break Mach 1, with the joysticks I imagine you could control the speed for a slow exploration cruise but it's nice to have the extra speed when it's time to get it back to shore. I agree with the lights though,

@wobblysauce

2 жыл бұрын

Yep, just means he can add just under an additional 4kgs which is quite a lot of room, but not in volume... or you can adjust the starting internal pressure to calibrate the ballast also.

@Funkatastrophe

2 жыл бұрын

Cylindrical Lithium Titanate cells would be perfect for maxing out battery and battery weight

2023 has the plans for the sub been revised 😅 love your channel

KZread really recommends me this the day after the Titan imploded?😅😅

DIY perks: "I think it migth be too buoyant" England: "Oh dear!" 19:51

@senseicodes

2 жыл бұрын

😂😂

Refined Design: I would say remove the steal pellets, and replace them with more batteries and for sure more powerful thruster engines :)

@ramzy.M

2 жыл бұрын

exactly what i thought when he started putting the steal balls in he probably thought of that too but runout of time

@OnlyMisery

2 жыл бұрын

4kg of batteries ? Also doing so much changes to the submarine will lose it's water proofing.

@Harsha04120

2 жыл бұрын

Yes

@ramdom_player201

2 жыл бұрын

I think the steel pellets are used to make it easier to adjust the weight distribution to keep the submarine level etc

@ThePippin89

2 жыл бұрын

@@ramdom_player201 the buoyancy balance can be adjusted using the syringes on each end.

KZread algorhythm playing a sick joke right now

I would honestly love a full video of just feed from the submarine. This was so fun!

Matt, don't forget about safety! If the sub goes too deep, it can pull its antenna under the water and you lose control. It is necessary to add an emergency system that will force the boat to surface if the signal is lost. For example, dump the ballast.

@Scott_C

2 жыл бұрын

Co2 cartridge powered airbags for emergency buoyancy?

@hax0rbugan670

2 жыл бұрын

Okay genius

@lordhelmchen616

2 жыл бұрын

make the float for the antenna more buoyant than the sub has weight with full ballast tanks under water. that way it can't pull the float down and you don't need some complicated emergency system

@nder4786

2 жыл бұрын

@@Scott_C really smart

@yourallygod8261

2 жыл бұрын

@@Scott_C as nice as that sounds your then fighting the amount of air still in the capsule if its in the sealed capsule like i think your thinking

So many clever design choices, lovely build.

@asdf-uj7wv

2 жыл бұрын

Well there is a similar project on KZread from few years ago.. Nearly the same design. So thus one here is simply stolen to make money through ads ^^

@alkaupadhyay7650

2 жыл бұрын

@@asdf-uj7wv Wow what a smart 🤓 view. Care to provide a link? Also every content you see nowadays is stolen.

@asdf-uj7wv

2 жыл бұрын

@@alkaupadhyay7650 Sure kzread.info/dron/VWgzB82P4xCq95byMwky-w.html btw i never said that DIY perks are bad. OFC they need to get their ideas from somewhere - and they did a great building!

@alkaupadhyay7650

2 жыл бұрын

@@asdf-uj7wv I mean the last sentence is pretty damn sharp. Except that you could have said i saw something similar/a similar model was made before

Some billionaires should have watched this

This is what my middle school stem class submarine project wanted to be but never ended being

An older AM transmitter and receiver has a better submerged range, or even a 36MH FM set, also the analogue servos are a great idea as they require less power the closer they get to their commanded position. Digital servos are always using power to 'hold' in commanded position - slightly different system. Great project, loved it

@FateGathersStudios

2 жыл бұрын

+1 When I saw the flysky come out, I was expecting a loss of craft at some point :)

@a.kjfhkziujsfdgbskjxfyhgfl2332

2 жыл бұрын

lower frequency have better range under water so it would be best to use the lower frequency possible

@bveracka

2 жыл бұрын

I was just going to mention that. I remember having AM and FM radio control gear back in the 90s and 00s for cars and airplanes. While obviously not as stable a signal as 2.4GHz, an AM system would likely work quite well underwater! 👍🏻

@tuttebelleke

2 жыл бұрын

I suppose with that solution it would work even better if the the antenna from he steering unit would be submersed too? It would eliminate the signal losses when transferring from air to water? Don't real submarines have any specific antenna configuration to communicate with the external world? If they have such methods, they most probably will about never be allowed to use it when doing their sneaky business.

@FireAngelOfLondon

2 жыл бұрын

@@tuttebelleke US and Russian military submarines can receive when submerged, other nations need to surface to communicate. A careful scan of the surrounding sea is needed before surfacing and they use high frequency tight beams aimed at satellites. The ultra-low frequencies used to transmit to submerged submarines have wavelengths measured in kilometres, so the transmissions come from aircraft trailing cables several kilometres in length as antennae. It is possible to build ground stations close to shore, but they are easy targets because of the huge and fragile antennae so aircraft are used instead.

Please bring this back, I'd love to see an even more improved version of this, it's already so awesome. Hopefully a lake trip too, goddamn i didn't know i loved submarines until today!

My kids must NOT see that video, they would harass me until I make a DIY submarine. This is an awesome project, your creativity and problem solving ability are both impressive! 👏👏

Yt algorithm knows what it’s doing 💀

@Benkwash

10 ай бұрын

😂😂😂😂😂😂

Damn man, am an engineer and i rarely get impressed by KZread's DIY projects, but almost all your projects impresses me, like in this the way you modified the servo is simply genius!

@purplepimp4204

Жыл бұрын

Would u make me a custom sub project 🤔

@ironman5034

Жыл бұрын

@@purplepimp4204 sure, if you paid me

@ToTeon

10 ай бұрын

@@ironman5034 how about 250k

@ironman5034

10 ай бұрын

@@ToTeon sure but that's too much for a small sub

@gristly_knuckle

10 ай бұрын

We have no idea how he knows how to do this, or how he planned it. He claims he made it up as he was going, but that seems completely improbable to me.

Imagine replacing the steel pellets with extra batteries. That would be a lot of power!

@McTroyd

2 жыл бұрын

On the other hand, having those pellets as a reference, a revised version could carry additional things. 🤷‍♂

@pompeymonkey3271

2 жыл бұрын

@@McTroyd Make room for the ICBMs! ;)

@McTroyd

2 жыл бұрын

@@pompeymonkey3271 Only if they're made of brass. 😉

@horizont6172

2 жыл бұрын

imagine adding torpedoes

@sinuslebastian6366

2 жыл бұрын

Isaque M - LT HoriZonT that's when you attract the 9/11 crowd.

Ocean Gates should hire this guy.

This was epic! One of my dreams was to join the design school while I was in the US Navy. It was amazing to see you make an almost perfect first attempt at a real sub.

11:00 you don't need separate thrusters for rotation and translation, this can easily be achieved through channel mixing in your radio.

@thatduke390guy

2 жыл бұрын

I thought the same

I like the fact that the most convenient thing he had on hand to demonstrate something sinking was a small motor

@coalthedergsune

Жыл бұрын

it was probably dead anyways

@nupurbansal4745

11 ай бұрын

What about wildlife I saw a dead fish

I have been watching and even playing with simple submarine toys geared towards kids for much of my life but the first minute of your video did an amazing job helping me understand a basic law of submarine "how they work", before I knew enough to know i was missing something and NOW i know enough that what i was missing was what you explained in the intro of your video.... thank you so much!

Hits different June 2023 💀

The U.S. Navy has a project called SeaPerch that is a STEM outreach program for high schools. I suggest looking into it for some ideas. I remember reading the documentation, which was designed to help student overcome various obstacles using very cheap solutions. One thing I noticed that you may want to look into is the tethering cord. ROV tethers are neutrally buoyant. If I remember correctly, the solution they came up to that issue was to attach pieces of foam pipe insulation every foot or so to counter the weight of the line.

@D3nn1s

2 жыл бұрын

Thats not a bad idea honestly

@magnem1043

2 жыл бұрын

thats what they use in the swimming halls so

@girlsdrinkfeck

2 жыл бұрын

@@magnem1043 aka buoys

@ScienceDiscoverer

2 жыл бұрын

*every 152.4 cm

OK this is such a cool project!

@monika.alt197

2 жыл бұрын

It is

Nice! Maybe try to I dunno visit a long sunken ship wreck or something, and maybe you could even sell the tickets for quarter a million bucks. You can control it by a Logitech controller🙈

having this recommended to watch just when the Titan submarine has gone missing, i wonder if they watched this when building theirs

I really like "unrollling" the servos into the syringe position control. That's great work, every part presented was more clever than the last. You can economize on your thrusters though! You currently have 4 translational and 4 rotation pumps. You should be able to use the transmitter's mixing control so that (for example) the left-right of the throttle stick runs opposite ends in opposing directions and the left-right of the right stick runs them together for translation. That will free up 4 pumps and 2 channels.

@seraphina985

2 жыл бұрын

Or he could keep perhaps keep both sets of pumps for extra flexibility, that way you get the flexibility to use both sets of thrusters just to turn or translate if you want to also.

@scheimong

2 жыл бұрын

I second this. Was just about to suggest the same, although my vocabulary wouldn't be as sophisticated 😅

Words can't explain how cool the creations he does are, honestly it's really opened my eyes to science and other stuff that at first didn't really appeal to me.

@germanbaconarmy1638

2 жыл бұрын

Omg

ocean gate should have hired you

Bro's the most grateful person I've ever seen

THIS WAS SO MUCH FUN. I didn't expect to enjoy a submarine build that much, but I did. Keep surprising us Matt.

Next episode: DIY Yamato class battleship using only soldering and brass!

@MrMartwy

2 жыл бұрын

Brass pillar is a must.

@cacingtanah6722

2 жыл бұрын

And wood veneer

@pietroblaze

2 жыл бұрын

No no, he's going to make DIY Yamato SPACE battleship

@RyanStone143

2 жыл бұрын

@@pietroblaze Yes!

@marcogenovesi8570

2 жыл бұрын

@@pietroblaze He is going to need more brass for that

I love the look and feel of the little yellow submarine, but I absolutely adore the realistic functionality, the wireless control, and the means of propolsion of yours. Unbelievable.

Stockton Rush behind the camera saying "Make sure you say Carbon fiber is good!" "Say it!!! say it!"

let me guess, your next projects is DIY GUIDED MISSILES with sugar rocket engine!!!! 😎👍

@Kal-ns3lp

2 жыл бұрын

vid after that:i blew up area-51 we can go inside now

@lfm4159

2 жыл бұрын

i legit though he was building an underwater missile 😭

@cuntyboi5465

2 жыл бұрын

@@lfm4159 so a torpedo XD

@nathanaelmalm5641

2 жыл бұрын

Don't show that video to Russia

@hunternorth8817

2 жыл бұрын

@Dito Alfrido I can see an application for that to fishing, like under an icy lake

Next video: "ICBM are Intercontinental Ballistic Missiles. They are basically very big missiles that can travel across continents to hit distant targets, usually with Nukes. Normally, they are viewed more as deterrents than actual weapons, because as soon as one of those is launched, all Nations that are also Nuclear Potencies will also launch theirs in what is called a MAD(mutually assured destruction) protocol. This would most likelly destroy all major cities in the world, cause a nuclear winter, and possibly end 80% of complex lifeforms in the planet." Today I will show you how to trigger a nuclear apocalypse with this DIY build!"

@mahaadevanvl4181

2 жыл бұрын

We should collab. We have the same intensions

2 жыл бұрын

... and it will have a nice retro style, being made entirely in brass.

@josearturo6169

2 жыл бұрын

Underrated

@PunakiviAddikti

2 жыл бұрын

It's about time. See you all in HELL!

@memesfromdeepspace1075

2 жыл бұрын

Fun fact . Geneva pack baned Any Orbital nuclear base . So that why all nation have ICBM.

Just saw this video right below a video about the ocean gate sub going down. Crazy.

oh boy... this video about to get a surprising new wave

this man went from literally designing a silent pc cooling system, to making submarines. hats off to you man.

When you replaced the variable resistors in the servos with sliding variable resistors, mind = blown. Greatest plot twist in non-fictional tv

I like your transparency about all this

Bro. What do you do for a living. You are an absolute genius. Kinda my hero. I have always wished I could be smart enough to do the stuff you are doing.

The problem with your "competitors" sub may not just be the weight of the tether, also the fact that that he used water to achieve neutral bouancy. He will naturally have slack tanks / free surface effect, causing the weights to shift with every movement. Best option to achieve neutral buoancy is permanent (ie fixed) ballast that does not have room to move. It is possible to achieve this with water, though you need to reverse engineer the weight needed. Your idea to work from the center, with the battery pack probably being the heaviest, made it probably have naturally more of a neutral trim, though it seems that after adding the weights you have small trim issue, probably meaning you are just a few grams off in one end as it is floating quite well from the looks of it. Would love to see how it behaved in a bit deeper water though, it seems to be quite decent, though maybe a bit underpowered.

@Zappygunshot

2 жыл бұрын

Another issue with trying to achieve neutral buoyancy before submerging is that the conditions of the water will greatly affect how much needs to be displaced to be considered "neutral". Things like temperature, salinity (salt content), and pressure will limit just how deep that submarine can go and how well it performs. In particular the sub's inability to regulate the pressure of the air inside its ballast tank will make it so either there's a maximum depth to which it can descend; or if it _can_ go deep enough, it'll result in the ambient water pressure being so great it compresses the air inside more and more as it sinks to the sea bed like a rock. The latter would be a somewhat greater issue for DIY Perks' submarine as it relies exclusively on the pressurised ballast tanks for buoyancy where ProjectAir's vessel will be able to counteract somewhat by using the propellers and fins to orient itself vertically and push itself back up. Submarines are complicated, yo.

@notean

2 жыл бұрын

Better solution would be single buoyancy tank and move-able ballast section which will auto-balance vessel as it goes.

@TheZirMc

2 жыл бұрын

@@notean That would complicate things a bit though. A simpler solution would be to add additional servo to control the two syringes separately, and being able to ballast forward and aft independently. Though suspect a combo of channels on the remote and/or space / weight restrictions might rule that out.

@notean

2 жыл бұрын

@@TheZirMc IMO it would make things more complicated as you must constantly compute pressure of tank1, tank2, depth and desired angle . It is possible to with computer controller but not simple. You must constantly fiddle with 2 motors to get balance. In my way you can set/freeze depth and set/freeze angle separately.

"Without calculation"? That was hilarious. This project required an amazing level of deep insight as well as an enormous breadth of comprehension of physics, electronics, and mechanics. I learned a lot from this great video. Thank you for your insane curiosity and passion for experimentation. :D

@tunjangade7648

2 жыл бұрын

agree

@Mystixor

2 жыл бұрын

Haha yea I had a good laugh at that as well. I don't know how accurately he calculated it in the end but approximating it with a simple cylinder should really give close enough results to achieve that neutral buoyancy roughly :)

@anonymoususer3561

2 жыл бұрын

Nah dude, it's not an amazing level, anyone can reach this level in a few youtube tutorials. If you aren't just trying to cleverly flatter him, give it a try. Find some cool idea that you'd like to make real and slowly learn what you need. It will be a lot of fun

@johnwig285

2 жыл бұрын

@@anonymoususer3561 anyone? Nahh.

@Kronos0999

Жыл бұрын

Lol, "amazing level" and to think he didn't actually think it through beforehand and believe him blindly.

Why is this suddenly showing up on my KZread feed?? 😳

@uno6504

10 ай бұрын

You know why 😂

Your kind of creativity is one of a kind! I'm very impressed every time i stumble over your channel. It's a pleasure to watch your clips!

Very cool build~ If you want to try a design without a tether you could use a radio operating at a much lower frequency that'll stand more of a chance piercing the water. As you pointed out 2.4GHz just gets absorbed too quickly for any useful depth. As a precaution you could have it surface on loss of contact by binding one of the channels to always transmit. When the receiver loses that signal have it surface so you don't lose it ;)

@ILikeFryz

2 жыл бұрын

Do you think a 27mhz radio would work better?

@ockay16

2 жыл бұрын

Most recent rc transmitter have a failsafe option which can set a servo to a desired position if signal is lost. In his case he could set it to empty the ballast.

@anesthetized7053

2 жыл бұрын

i have a feeling that would make it much more challenging to get the live video feet at a good resolution

@LiaIsTheCutestKitten

2 жыл бұрын

@@ILikeFryz 27MHz should work well. I would recommend checking if that band is legal to operate in your country as it varies depending on where and what you're using it for.

I love how he explains the reasons behind selecting a particular component.

One of the few videos that's more interesting than it looked in the thumbnail.

When you build your submarine by watching youtube videos. IYKYK #titan

@haZikMB

10 ай бұрын

ocean gate 💀

It was cool to see this actually work in the end. The only thing I ever managed to build from your channel was a wireless Bluetooth speaker but I want you to know that your content is deeply inspiring. Please keep making beautiful and awesome stuff.

Your videos have a certain quality about them: they are pleasant to watch, relaxing and calming even, due to fluently but surely moving the viewer into a creative and positive mindset. They also emanate a contagious enthusiasm. Keep this on. :) This is your trade mark, your own creation you can be proud of and feel fulfillment about, Matt. :) Cheers!

if you would make this as a complete diy kit I would absolutely buy it! I had so much fun watching this vid, your design is amazing!

Well done Matt. I always look at the length of your video and think «naaah I don’t have time for half an hour, I’ll just skip fast through it to the end». But the production quality is so high I feel like I’m missing out if I skip through it, and suddenly: half an hour gone. Wonderful job!

I just love Matt's excitement even when the design wasn't perfect he already had ideas for making it work. Can't wait for the improved version!

Anyone else notice a lot of engineering creators making submarines? They must know something we don't

@oldacc_ihatebrickplanet12

2 жыл бұрын

teamseas

@orphidian11

2 жыл бұрын

climate change

@Obyvvatel

2 жыл бұрын

Becaumse submarime cool

@therealb888

2 жыл бұрын

What if 2012 was actually 2021?!

@marcogenovesi8570

2 жыл бұрын

water rises

That sir is one fine machine, great design and looks incredible.

You very clearly explain your every action and what you do in general. I've gotten a little smarter in the last 27 minutes!

@Player-fg4ub

2 жыл бұрын

so true...

@charadremur7354

2 жыл бұрын

Wait I was halfway through, and I didn't even realize that it's 27 minutes, wow!

@Boys-R-Boys-and-Girls-R-Girls

2 жыл бұрын

And other people are watching island boyz trying to rap

@srsachinsr

2 жыл бұрын

#thank you so much #srsachinsr