Looks beautiful! Nice work.

@yarieldelgado8422

3 жыл бұрын

Wow 14 likes no comments, unbelievable!

@bryanjovannyinzunzajimenez4667

3 жыл бұрын

Bob?

@danisol558

3 жыл бұрын

Bryan Jovanny Inzunza Jiménez Steve. :D

@jdev1647

3 жыл бұрын

69 likes lol

@bdawwg0774

3 жыл бұрын

Hey Steve!

for all the people in the comments saying "oh corona" on the paper at start that's the model name for the Xbox firmware and the motherboard it shipped with there are as follows. Xenon, zephyr,opus, falcon, jasper, trinity, corona. showing its a 2012 last gen variation

@aurora6758

4 жыл бұрын

xLinka and Winchester but they were the last gen and shipped on the “e-slims” slims would come either with trinity mother board or a corona motherboard trinity usually had the earlier manufacturing date and corona later around 2011 (the difference for both was that trinity used the standards 10.83a and the corona was 9.6a I think ) xenon and zephyr were the first boards to come into manufacturing in around 2005+ zephyr had a hdmi port then later variations when xenon failed with the red rings the opus consoles were usually sent out once the xenons got discontinued the same with zephyrs they were replaced with falcon boards and around 2008 they provides the jasper boards, these were the best boards for the phat consoles for modding and a quite favourable. Hope this helped

@spoof_aye

4 жыл бұрын

correct there is also a "E" variant confirmed with a slightly different corona board and the case looks like a Xbox One original, But that model also a really late 2013 model that patched the RGH exploit.

@spoof_aye

4 жыл бұрын

@@izfida yep pretty much.

@dwajinkoppunoori

4 жыл бұрын

xLinka thanks mate

@KXDEY

4 жыл бұрын

Don't forget Winchester!

I missed the satisfying ,,and we're done!"

@JeffPerson

4 жыл бұрын

he should say it it was so good when he said it haha

@AppleLife4123

4 жыл бұрын

same lol

@theannoyedmrfloyd3998

4 жыл бұрын

"...and we're done!"

@agamingchannel2

4 жыл бұрын

Wendy’s dont roast me

@caelari1722

4 жыл бұрын

hahahaha i do not even know why i always laugh the i heard him saying that...

Hugh, Since the Xbox didn’t come with a Hard Drive. Try Installing an SSD inside it if you can. That would be a really cool project and you would have a fast Xbox 360 Slim

@Taken_Alpha

4 жыл бұрын

He could do that but it would be a huge pain to do

@pastalover21

4 жыл бұрын

They don’t handle SSDs well due to them constantly reading and writing to the disk. This significantly reduces the life of the drive.

@w3bv1p3r

4 жыл бұрын

There is actually a reason they didn't, the Xbox 360 plays the games from the data on the disk. Only (like a couple of MB) are stored on a 5 GB hard drive (might be bigger). You could download games from the Xbox store, but you sometimes pay more then you would for the disk. I'm just speaking from experience, correct me if i am wrong on anything.

@seanw789

4 жыл бұрын

@@w3bv1p3r You could install games to the HDD (After the original blade dashboard was updated) I always did, saves wear on the DVD Drive and generally reduced stuttering caused by DVD latency.

@Taken_Alpha

4 жыл бұрын

To everyone saying they can't handle SSD's or listing off reasons they didn't use them. That doesn't matter, in order to get an Xbox 360 console to recognize a SSD or even a HDD as an internal storage medium requires software tools to format the drive in a way that the console could use it. and it would need to be a specific size because the hard drives were only made in certain storage sizes

I wish these types of mods were available for the Xbox One. There was a whole modification community for the 360. Good ol’ days.

Very nice! I did something similar years ago with my 360. Clear body, clear fan/heatsink shroud, DVD top removed besides center strip, third party led back fans, 60mm top fan addition, 2 digital temp readouts on both the main heatsinks. Was a thing of beauty, now sits in storage 🤐

when you were at it, you could also change the termal paste

@andreilucian10

3 жыл бұрын

That super clean fan tells me someone did that little time before :))

I have that same exact case on my Xbox 360 and it got me so excited. It's been around 5 years since I've modded my 360 for that, but I've had so many great memories on my 360.

Beautifully done. I absolutely love watching your videos. Keep it up

thank you for making my day and keep doing you and your good work :3

I could only imagine how cool a PS4 would look with a transparent housing for the unit.

By far the coolest xbox 360 build I've seen from anyone build! Awesome job man! Awesome build great job!

Huge, great job on your channel and videos are high quality shows you really put the effort and time. Just letting you know my friend it doesn’t go unnoticed!

Hugh Jeffreys Stats Intelligence - 100% Knowledge - 85% Physical Activities - 74% Supportive - 65% Technical Service Supervision Expert - 97% Experience - 100% Charmful -92% Keep up the great work here Hugh I’ll keep on assisting you to your success

@jahadmeneh1396

4 жыл бұрын

Shut tfukup

@Sahara_Ace

4 жыл бұрын

@@jahadmeneh1396 hey bro watch it

@2500hd_idk

4 жыл бұрын

Starlight Artemis hey Sis Watch your profanity

@Sahara_Ace

4 жыл бұрын

[IOS] Awesome Default ‘scuse me I don’t use profanity here ok

@marcmiyamoto

4 жыл бұрын

Starlight Artemis yeah profanity is for bad people

Well done! You are doing very good work!!

Your channel definitely deserves my subs!

hello Hugh! I love this mod and it's good to change things up. also a suggestion for your website: add captions to photos take new and better photos make merch I will buy it :) idea for merch: Hugh Jeffrey's logo and curcit board pattern around it, like the intro 🙂

@ikky_o7

4 жыл бұрын

U foolish grapefruit

@riftkey

4 жыл бұрын

@@ikky_o7 umm?

I love these videos they are very entertaining, do not stop uploading videos please! a big hug from Mexico

Where can I find this clear case? I can't seem to find any available in stock.

I have had a Xbox 360 for 6 or 7 years and it still works amazing I still use it every so often.

Entertaining and satisfying like always. 💯

Back three years later to watch again. I always loved transparent cases. First one was my Nokia 8146 in electric blue, and I put a flashing aerial on too.

The fact this console is sorta coming back is amazing

Is there a way to fix the power brick when the light on it turns red and “dies” or do you have to buy a new one?

Nice vid Hugh! 👌

Hugh's work is CLEARLY amazing.

I love these videos and they have helped me repair my own device

wow i thought you were boring but... your videos actually help me thanks for the support man.

Brilliant build hugh, be safe 👍

Looks amazing. Would have been awesome with green led lights as a nod to original xbox but still... Looks awesome

Dude love the video already, not even a minute in the video, it's already interesting 😄

hugh, im trying to get into resorations myself. is there anything i should start with practising on like old consoles and iphones. or simple bundles/lots of broken devices???

This guy is an experienced professional I hope that if he was a doctor he would repair Corona with the sponsorship of I Fixit

Very efficient. Good job, good video

That thing looks SWEET

Hi, it is my birthday month and since this whole corona pandemic is here I can't have a party and your videos really help me get the entertainment I wish to have from this pandemic (keep up the good vids)

@thealien_ali3382

4 жыл бұрын

Spread Ur cheeks and pound it

Hugh please make links to the custom housings for consoles and iphones. Im begging you for an custom coloured iphone housing.

@joshuabest100

4 жыл бұрын

I know

@alessioacri.

4 жыл бұрын

Usually you can find 'em on Aliexpress or ebay

@GeraltOfRivia69

4 жыл бұрын

You can find easily on aliexpress

@joshuabest100

4 жыл бұрын

Can you get me a link then please

@2S2F1

4 жыл бұрын

Alessio Acri nah man ive tried to find blue housings for the ip6 and it’s literally impossible.

waw i like that youre doing more then just iphones and doing just more tech stuff keep up the good work

loved the 360 modding!! great content.

Where did you get that transparent case for the xbox?

Hi! You are my favourite you tuber, thanks for being you and because of your channel, you have inspired me to move on to a tech channel of my own which I will soon be uploading. Again, thank you so much and keep going on!

Hi Hugh I attempted a screen replacement on a iPhone 6s and it all went well thanks to your video . Well until I went to plug the screen in. The connector connecting the home button fell off the ribbon cable and now I have no home button THIS HAS HAPPENED TWICE. So I’ve spent more on screens than I have on the phone. Is there a way I can fix it or do I have to spend yet another £20 on a new display?

Hugh I love your channel!!!

where did you get the clear case dude?

"Once we are happy, it's time to continue on..." Seems like I'll never be able to continue on

@imadrabhi5991

4 жыл бұрын

Happiness doesn't really matter when you think about it friend.

Nice. A clear DVD drive lid and fan would make it really outstanding.

Where did you get the case from? Link if available pls???

you vids are always fire

Take a shot every time hugh says clips. Enjoy a smashing night.

I’m curious how leaving out that shielding affect the operation of the Xbox. I’m assuming that shooting was heat shielding. So it doesn’t get really hot now without the shielding? It looks cool. It really does.

Do they make those shells for the xbox 360 e(the one that released along with the xbox one)??

WOW HUGH JEFFREYS WHAT A BUILD🔥

hi, ghostcase website dosent work where did you ordered it?

You are a very skillfull lad,well done mate keep them comming👍

@riftkey

4 жыл бұрын

I agree mate

Woow! It’s looks beautiful.👍

does it run unsigned code and original xbox games

Tbh the black bezel on that clear Xbox would’ve looked sick

Love all of your videos

I have a question can you transfer pictures from your Xbox 360 to your Sony PsP Portable?

where do you get the iphone housings with the apple logo?

Should try and see if you can find a transparent DVD drive casing, they used too make them back in the original 360 days and they looked amazing

Looks great👍🏼

This looks so cool

What is the name of the LED light kit or how can I find it online?

Bro where did you buy the case from?

Where can I get shells for the consol?

Love your videos!

Looks cool, look better with green LED's I think.... great vid keep them coming chap :)

Do you mind saying where you got the ghost case?

Hugh Jeffreys: I'm not scared of anything *Xbox 360 clips Hugh Jeffreys: But those, they scare me

seems a bit late to mention this, but the middle support plastic on the sides aren't actually melted, they do indeed just pop off like little clips and re-attach, that's how you'd access the other plastic clips for the outer piece

Dang that looks awesome

Can i ask u questions? I replaced my battery and screen after that my iPhone won't turn on. It's possible that my logicboard damage? Hope u answer this thankss.

You dropped this...👑

Bro - i just wanna know how you got your hands on a Clear GhostCase?

I love your videos Hugh Jeffery

3:07 *dies of laughter as i did not see this coming*

You are the best! Clean 😉

Hi bud l have a xbox 360 with the hardwire on top can you get a case for this one?

Hey Hugh what do you do with repaired hardware?

It’s crazy to think my Xbox 360 Elite never once failed on me not even a red ring of death, it’s still invincible to this day from when I first bought it in 2007

Where did u get this shell ?

Where is the direct link for this case.? I would also like to get a clear case for my falcon fat

It's like my Cyber bot PS3 I have 3 colours of LED's though and an LED fan, nice build though. I like those ghost cases

where do u get the housing from ?

where did you get the clear case

Having this back this lol u would have been the goat

Woah that’s cool!

this reminds me of my old jasper 360 that i put an xcm clear case, xcm rear fan w/ Fan controller, and the two heatsink fans. that thing glows soooooooo bright but its pretty damn loud lol

This is the sexiest piece of art I have ever seen.

Will the Insides of an xbox 360 E fit I to a slim shell? Becasue I csnt find any 360 E shells. Anywhere. Someone help.

How do u get deliveries during the lockdown

i actually got a gloss xbox 360 s for the a little less than you got yours including shipping and it works perfectly and seems like it has barely ever been used, barely and dust and only a some light scratches with one patch of scratches ontop. edit: although i only got the console and the av cable, nothing else

Where can I find this custom case ?

looks perfect !!!!

Me: Ah... I miss his videos... This video pops up Me: He is risen

I’ve customized the same exact console and it was difficult but wasn’t bad at all, I didn’t break any clips or anything at all. This looks more complicated than what I remember

@7ngel

4 жыл бұрын

You sure it wasn’t the fat model?

Onde consigo comprar dessa carcaça transparente e o led também?

I'm a little surprised that you didn't replace the thermal paste, because god knows who and how played on that console. Anyway, great housing replacement/customization video!

Been looking for a Ghost Case like that for quite a while but they are impossible to find. They don't make them anymore.