Congratulations to Riccardo Bergomi in Milan, Italy for winning our John Mayer Pedalboard Giveaway in Collaboration with Sweetwater. We had over 17,000 people enter! Thank you to you all for participating and stay tuned for another pedalboard giveaway in the near future!

I don´t know if it´s me getting older, but besides the mega-builds i´ve grown to appreciate simple boards like this. Great content, as always!

@VertexEffectsInc

3 жыл бұрын

Yesss! Wisdom!

“Most John Mayer per square inch”😂😂

@VertexEffectsInc

3 жыл бұрын

Hahahahah

@Starch1b2c3d4a

2 жыл бұрын

And he flicks his hair…. Hehe

Finally someone actually bulit and plays the pedalboard.

I have always loved the Ibanez TS Mini. I think it sounds just-as-good . . . as any of the Tube Screamers. Always enjoy your informative videos Mason. Stay Safe brother.

@VertexEffectsInc

3 жыл бұрын

Thanks man! Glad you dig it

The background music is NICE

@VertexEffectsInc

3 жыл бұрын

Thanks for watching!

The sheet metal top is a great idea for these pedaltrain boards.. the rails just never give enough purchase - going to need to look into this idea. Cheers man

@VertexEffectsInc

3 жыл бұрын

👍👍👍

My suggestion: Micro Q tron-$95.80 Keeley tone workstation-$299.00 JRAD archer-$199.00 TC Alter Ego-$169.99 Boss TU-3-$99.99 Final Cost $863.78 Masons suggestion: Vertex steel string-$199.99 JRAD archer-$199.00 Ibanez TS-Mini-$79.99 Xotic EP boost-$120.00 Ibanez analog delay mini-$119.99 Boss TU-3-$99.99 Final cost $818.96 Cost difference-$44.82 more for my suggestion Some additional points: - For an extra $45 you get much closer to the overdrives and boosts John Mayer actually uses, as the Tone workstation was based on John Mayer’s tonal needs and includes a comp as well as a bluesbreaker/katana boost that are excluded in Masons board, yet are much more central to Mayer’s tone than a Dumble OD and certainly an EP boost which I’m pretty sure he doesn’t really use often/at all. - Moreover, Mayer has used analog delays, tape delays, and digital tape delay emulations, so digital tape echo emulation pedal, would be a much better alternative as it can handle much more of the delay tones of John Mayer. - My suggestion includes an envelope filter which John Mayer is famous for using. - As a final point, if use the same power supply as Mason does in this video (Truetone CS6) you can always one more pedal, as my board concept leaves one free adapter for one more pedal. You can add a wah pedal, Dumble style OD, Boss BD-2 or octave fuzz of your choice to include one of his less frequently used effects.

@VertexEffectsInc

3 жыл бұрын

Ben, I think you make some good points here. A few things to remember, it needed to fit on a Metro 16. You suggestions are larger pedals, this would be problematic to sell the "mini rig" concept of the giveaway pedalboard, nor would they fit with this board platform. Secondly, this giveaway was sponsored by Sweetwater and done in collaboration with them, meaning we had to use pedals that were in stock and available through Sweetwater. I don't see the Keeley Workstation, Alter Ego, or the Micro Q Tron in their inventory or in stock. I think there a lot of way to "Skin The Mayer Cat", I tend to go for more of the Continuum era stuff, and Trio era since that's more of the iconic tone to my ears. These were much more scaled back rigs compared to what's being used now, and pre-dates the use of the filter effects, or any compressor use. In any case, I appreciate your feedback, and certainly if the only criteria was getting there at the lowest cost there would be lot of pivot options to make, differently from what I did with Sweetwater.

@benskurbe

3 жыл бұрын

Vertex Effects fair enough. Your choices definitely make a lot more sense under the limitations you laid out. I wasn’t trying to be confrontational btw just wanted to make some counterpoints.

@VertexEffectsInc

3 жыл бұрын

I appreciate the suggestions

@benskurbe

3 жыл бұрын

@Luke Monsensey thank you for that, I didn’t realize you were the judge of who asked or that I needed permission to share my relevant opinion but okay. Thanks for the unnecessary rudeness. I’m sure that that attitude gets you far.

I love the pedalboard, I love the tone that allows you to get. Also thank for sharing that boss pedal trick!!

@VertexEffectsInc

3 жыл бұрын

Thank you so much for watching!

This is amazing. Thanks vertex effects for this opportunity ❤️

@VertexEffectsInc

3 жыл бұрын

🥰🥰🥰

Awesome build, very inspirational. Full of great advice and tips

@VertexEffectsInc

3 жыл бұрын

Thanks Josh! Glad you dig the video! Make sure to enter the giveaway!

Awesome sir Bonnie Scotland is very impressed

@VertexEffectsInc

3 жыл бұрын

thanks for watching!

Enter to WIN THIS BOARD here! www.vertexeffects.com/Pedalboard-giveaway

@geras2058

3 жыл бұрын

I really wanna win this, I've never had a pedalboard before

@VertexEffectsInc

3 жыл бұрын

Fingers crossed 🤞

@elvinlupi5619

3 жыл бұрын

Is this U.S only?

@VertexEffectsInc

3 жыл бұрын

Worldwide

@VertexEffectsInc

3 жыл бұрын

Elvin Lupi worldwide

Super good demo, and Rig Doctor was around during premier to answer qs! Thanks @VertexEffects!

@VertexEffectsInc

3 жыл бұрын

Thanks for watching

I'm really liking your videos! You're just a knowledgeable dude with a nice way of talking. I like it!

@VertexEffectsInc

3 жыл бұрын

Ty Abrahamse 🙏🙏🙏

Simply the best rig 🙏

@VertexEffectsInc

3 жыл бұрын

Yes indeed!

Love this series!

@VertexEffectsInc

3 жыл бұрын

Good luck in the giveaway! Fingers crossed!

This pedal board is so very beautiful !!!

@VertexEffectsInc

3 жыл бұрын

Thanks for watching!

Phenomenal playing from Jules Leyhe. Would love to see more of him in your videos.

@VertexEffectsInc

3 жыл бұрын

Yes!!!!

Great work,you make it look easy! Always great info,thanks

@VertexEffectsInc

3 жыл бұрын

So glad you dig it! Hope we earned your subscription

@335gc

3 жыл бұрын

Vertex Effects absolutely

@VertexEffectsInc

3 жыл бұрын

gary ciuci 🙏🙏🙏

This is actually one of my favorite boards ever. I entered in as soon as I saw it a long time ago and I actually think about it and pray every day

@VertexEffectsInc

3 жыл бұрын

🙏🙏 🙏 good luck

As always Sweet build sir.

@VertexEffectsInc

3 жыл бұрын

🙏🙏🙏

That's the nicest pedal board I have ever seen. Never had the money to buy pedals but I submitted in hopes of getting that board to sound like my favorite guitarist John Mayer. New subscriber here, nice video Mason!

@VertexEffectsInc

3 жыл бұрын

Best of luck! Thanks for subscribing!!!

Idk why but showing that you flipped the back case of the tuner really cracked me up. That's brilliant!

@VertexEffectsInc

3 жыл бұрын

Glad to share this!

Super video! Thanks Dr. for tips and tricks. ;) It helped me good. Awesome!!

@VertexEffectsInc

3 жыл бұрын

Glad it was helpful!

hey bro, I love watching your videos and I learn a lot from them, thank you very much

@VertexEffectsInc

3 жыл бұрын

Really stoked you’re digging the channel and learning my friend!! Thanks!

Awesome!!! Very good job guys!!!

@VertexEffectsInc

3 жыл бұрын

Thank you!! Make sure to enter to win!

AWESOME!!!!!!

@VertexEffectsInc

3 жыл бұрын

Ronald Jr Sugitarios Tubio 🥰🥰🥰

great video as usual

@VertexEffectsInc

3 жыл бұрын

Thanks so much🙏🏼🙏🏼

Wow thanks for the boss pedal tip for pedal tape I never realised that :)

@VertexEffectsInc

3 жыл бұрын

🙏🙏🙏🙏

This! Fingers crossed.

@VertexEffectsInc

3 жыл бұрын

🥰🥰🥰

Super duper great pedal 😁😍 Thanks for making giveaway contest... 🙏🙏

@VertexEffectsInc

3 жыл бұрын

Andrew Pun 🙏🙏🙏👌👌👌

I recently bought a boss pedal and was just about to remove the rubber. I am glad I saw this before I've done it. Thanks!

@VertexEffectsInc

3 жыл бұрын

Glad I could help!

@forester057

3 жыл бұрын

Lesson learned: always think twice before removing the rubber.

@VertexEffectsInc

3 жыл бұрын

You’re a genius 👍👍👍

@VertexEffectsInc

3 жыл бұрын

@@forester057 yes indeed!

Very helpful video 👏👏👏

@VertexEffectsInc

3 жыл бұрын

Glad it was helpful!

Wow!! I really need this 🤞🏻🙏🏻

@VertexEffectsInc

3 жыл бұрын

Good luck!

@pazshemesh3778

3 жыл бұрын

@@VertexEffectsInc thank you! 😊

I hope I'm not too late for the giveaway 🤞. Love the sound of the rig, great job 👏👏👏

@VertexEffectsInc

3 жыл бұрын

Just gave it away yesterday!

Great video! I watched it on my tv but came here to subscribe! Great stuff thanks!

@VertexEffectsInc

3 жыл бұрын

🥰🥰🥰

Dual lock is cool thanks

@VertexEffectsInc

3 жыл бұрын

The best!

I love it. It's pocket size!

@VertexEffectsInc

3 жыл бұрын

The kids these days want tiny rigs!

@thcblgy7993

3 жыл бұрын

@@VertexEffectsInc What's it weigh in at 8 lbs ?

@thcblgy7993

3 жыл бұрын

@@VertexEffectsInc It's not the size of the rig it's how it's used....

@VertexEffectsInc

3 жыл бұрын

Thc blgy I don’t recall the weight...it packs a punch for sure

Awesome! He said Oakland as in bay area Oakland? Represent! Great info and well done and cleanly executed video on getting that tone and building a proper, clean, and organized rig. Party on!!

@VertexEffectsInc

3 жыл бұрын

Yes! Thank you!

Amazing a great video

@VertexEffectsInc

3 жыл бұрын

Thanks for the visit

Gosh I would love this

@VertexEffectsInc

3 жыл бұрын

Be sure to sign up for the giveaway

Easy to going❤️

@VertexEffectsInc

3 жыл бұрын

Yes 😊

yeah !

@VertexEffectsInc

3 жыл бұрын

Good luck in the giveaway!

Nice pedalboard! but really insane the thing you did with the rubber feet of the boss tuner

@VertexEffectsInc

3 жыл бұрын

Insane = good I hope? Thanks for watching!

Vertex Inversion. Slick.

@VertexEffectsInc

3 жыл бұрын

thanks for watching!

Love this board.

@VertexEffectsInc

3 жыл бұрын

Thanks Eric! You could win it! Make sure you enter :)

@ericwilliamson9869

3 жыл бұрын

Vertex Effects i already receive the newsletter but I signed up for it anyway. I also have been subscribe for a while now on KZread and also follow in Instagram. Only thing is, I don’t have Facebook because, well, I don’t care for Facebook. Lol

@ericwilliamson9869

3 жыл бұрын

Also, you’re located in LA, right? Do you re-house old pedals or know a guy who can?

@VertexEffectsInc

3 жыл бұрын

Our showroom is in LA and manufacturing. You can always email us and we can talk to you about options for mods.

@ericwilliamson9869

3 жыл бұрын

Vertex Effects will do! Thanks

Hey! Awesome video as always. I've never learnt so many things in such a short amount of time as I've done by watching your videos!! Please never stop sharing knowledge!! I have a simple question... What material is the platform you've mounted on top?? I have a Novo 32 and I don't know what material to choose because it's already veeeery heavy (but I want that little extra space of not having rail holes). Thanks!!!

@VertexEffectsInc

3 жыл бұрын

So glad you liked it, this is just an 8th inch of sheet metal cut to the size of the pedal train

I recently submitted my entry. This is my dream pedalboard. ❤️

@VertexEffectsInc

3 жыл бұрын

Good luck!

Very nice 👍

@VertexEffectsInc

3 жыл бұрын

Thank you! Cheers!

Awesome!! I Thought I was the only one who does that with boss pedals ;) Hope to win this pedalboard!!

@VertexEffectsInc

3 жыл бұрын

🍀🍀🍀 good luck

3 жыл бұрын

@@VertexEffectsInc Thanks man!! Greetings from Bogotá, Colombia.

man ..i need this

@VertexEffectsInc

3 жыл бұрын

good luck!

@ryner5171

3 жыл бұрын

💙

I need to know more about that custom interface !!!

@VertexEffectsInc

3 жыл бұрын

We have a few videos where we show an in-depth tutorial of this

Very tastefully marketed... not too much use of the term sweetwater and because of that i would use sweetwater in the future... well done all involved

@VertexEffectsInc

3 жыл бұрын

Thanks for watching

I've had my guitar for a year and a half now, and I'm looking forward to this giveaway and that you'll guys choose me! And I already registered 😂😂

@VertexEffectsInc

3 жыл бұрын

Good luck!

Thats wonderful pedalboard. Hope to win it.🙂

@VertexEffectsInc

3 жыл бұрын

Good luck 🍀

well fingers crossed i win this 🤞

@VertexEffectsInc

3 жыл бұрын

Good luck!

@Manu-xk1ub

3 жыл бұрын

@@VertexEffectsInc Thank you :)

Watching it for the 1000th time

@VertexEffectsInc

3 жыл бұрын

Yes!!!

I don't always enter giveaways. But when I do, I prefer John Mayer pedalboard giveaways.

@VertexEffectsInc

3 жыл бұрын

😂😂😂

I'm not really hoping to win this but still entered the giveaway for assurance😂jk great work there Mr.Mason👏

@VertexEffectsInc

3 жыл бұрын

Thanks Benny! Good luck!

i felt physical pain when you ripped of the rubbery part of the boss pedal lol

@VertexEffectsInc

Жыл бұрын

What's the alternative?

@francisco.amorim

9 ай бұрын

@@VertexEffectsInc If there's room for the rubber part on the circuit side, can it be kept untouched?

Nice sound, I'm a big fan of Mayer and his sounds are creat and didn't know that it's possible to have a good sound for low budget. Nice idea!!

@VertexEffectsInc

3 жыл бұрын

Glad you like it!

Great build video. Truly appreciate it. I'm not sure if you placed a plate over the Metro16 rails in order to increase the contact surface area for the mini pedals. I would be curious to know what gauge steel you used. Thanks.

@VertexEffectsInc

3 жыл бұрын

16 AWG

@SanchezGuitar

3 жыл бұрын

@@VertexEffectsInc Thanks 👍

@VertexEffectsInc

3 жыл бұрын

Angel Sanchez Guitar 🥰🥰🥰

Great build! When I use dual lock it always comes off of either the board or the pedal if I try to remove a pedal. Once it comes off it will not stick again. Doesn't seem to matter if I just put the tape on or if it's been on for months.

@VertexEffectsInc

3 жыл бұрын

If it’s coming off it’s for two reasons, first reason is you didn’t clean the surface before you applied to dual lock. Second reason would be, it’s supposed to remain sedentary for about 12 to 24 hours before you really start pulling things on and off, almost like a curing of the adhesive. If I follow those steps I’ve yet to have a problem in over a decade

@frankstabler1920

3 жыл бұрын

I did let it sit for 24 hours. Maybe it's not cleaning the surface well enough. I'll try that next time. I really liked the tip about flipping the bottom of the one pedal over to get a clean surface.

@VertexEffectsInc

3 жыл бұрын

@@frankstabler1920 Let me know how it shakes out

@nianwen7814

3 жыл бұрын

Had the same issue before, the reason for my case is that I use the wrong gauge, the 400 grid dual lock I applied was too strong for pedalboard usages, should choose 250+170 or 250+250.

Just an idea but maybe you should let us submit photos of our pedal boards and you can review and make recommendations and tips on what to do next time. Especially since you really support dyi work

12:22 is that "Intimate Friend" by Eddie Kendricks? I think I've heard you play that before. Great tune.

@VertexEffectsInc

3 жыл бұрын

I think it’s called Tie Die

@johnmorrison8618

3 жыл бұрын

@@VertexEffectsIncDon't know that one.. Check out the Kendricks tune though, it is the same progression and tempo.

@VertexEffectsInc

3 жыл бұрын

John Morrison will do

Can't tell you how many times I've watched this!! Wondering with the new SSS, would you be able to take the Archer out and just use the SSS and Tube Screamer?

@VertexEffectsInc

3 жыл бұрын

They do different things. The SSS is really about the Dumble Amp tones...the pedals are sorta doing a different thing.

@jiraphatnimkittikul3435

3 жыл бұрын

@@VertexEffectsInc Got it! Already placed order for your SSS, can't wait to try it out!

@VertexEffectsInc

3 жыл бұрын

@@jiraphatnimkittikul3435 Amazing! Thanks for the support!

I’ve never owned a pedal before and John is my favorite guitar player. I know I would put it to great use if I win.

@VertexEffectsInc

3 жыл бұрын

Good luck!

First time entering for a giveaway 😅🙏

@VertexEffectsInc

3 жыл бұрын

🙏🙏🙏

I enjoy your board builds very much. I don't do well with soldering however and am curious as to why you cut the power supply cables and re-solder the ends. For space or aesthetic reasons?

I’m casting black magic to win this since i’ve heard about it. Lma0!

@VertexEffectsInc

3 жыл бұрын

Hahaha 😂

cool😍

@VertexEffectsInc

3 жыл бұрын

Good luck in the giveaway! Fingers crossed!

I'd like to know more about that custom interface.

@VertexEffectsInc

3 жыл бұрын

It’s just a glorified I/O pass through box, we have a few videos on more fancy ones on our channel

@leibundgu0

3 жыл бұрын

@@VertexEffectsInc can we have a Link to this I/O videos? Good work!!! Regards from Switzerland.

When is the winner announced? Thanks for doing these videos there super helpful!

@VertexEffectsInc

3 жыл бұрын

Last day of October!! Glad you dig the content!!

Did you switch the order of the TS and the archer or are my eyes playing tricks?

@VertexEffectsInc

3 жыл бұрын

Adam Guillory we did - I rechecked the original rig and realized I’d reversed them

Does John run the tube screamer into the Klon? I figured they would be stacked opposite.

@VertexEffectsInc

3 жыл бұрын

This is what I’ve seen on rig shots and being in front of the rig myself a few times

Couldn't we not rip the sticker off when flipping the plate to apply adhesive?

Awesome. What was the reason again for placing the steel String later in the chain?

@VertexEffectsInc

3 жыл бұрын

Thanks Bryan!

@bryanlaird745

3 жыл бұрын

Vertex Effects I have your S.S SRV pedal but I am amp-less at the moment because it was never returned to me from a mod shop that went under. Hopefully I can get an amp to try it out soon!

@VertexEffectsInc

3 жыл бұрын

Hope you get it soon!

Uncle Mason: I was just taking a calculus class in college and they kept talking about vertexes, and since a vertex is part of a parabola it made me think: Mason should do an EQ pedal or something and call it "the parabola"

@VertexEffectsInc

3 жыл бұрын

yes!!!!

@danielwilliams9634

3 жыл бұрын

@@VertexEffectsInc when you make it, im going to need an Uncle Mason built pedalboard

One thing I noticed not discussed are John’s other effects (Roger Linn) and placement. I would be curious about this.

@VertexEffectsInc

3 жыл бұрын

Would’ve been too big and only used on one song I think for the BTMB sound

@willywonka200000

3 жыл бұрын

Vertex Effects he used the Adrenalinn 1 for BTMB, the adrenalinn 2 on Slow Dancing and the adrenalinn 3 on Heartbreak warfare. I’m pretty sure at least 😅 Full blown Mayer board would be insane!

@VertexEffectsInc

3 жыл бұрын

Donnie Simmons what was the AL used for on Slow Dancing?

@willywonka200000

3 жыл бұрын

Vertex Effects my bad, I meant “I don’t trust myself”. He uses the AL envelop filter. I had slow dancing on the brain lol

@VertexEffectsInc

3 жыл бұрын

Donnie Simmons 👍👍👍

Another awesome board! Love the John Mayer/SRV tones👌 what are you using for your surface on the pedal train? I noticed it’s a lot thinner than what you’ve used in the past.

@VertexEffectsInc

3 жыл бұрын

Tanner Shultis amazing! Using some thin powered coated sheet metal

@tannershultis6656

3 жыл бұрын

Vertex Effects oh awesome! It looked great! I’ve added surfaces to a couple pedal train boards, might have to find something similar for a thinner option. Thanks!

@VertexEffectsInc

3 жыл бұрын

Tanner Shultis most metal places can make this for you and you can get it powder coated like we did for this project.

@tannershultis6656

3 жыл бұрын

Vertex Effects Cool, I’ll have to get in touch with a local metal place. Thanks for the direction!!

I usually hate pedal board but I love everything about this one to my taste. Being a plug and play guy , it would be the desert island pedal board I'd like to have. I'm in for the draw!

@VertexEffectsInc

3 жыл бұрын

🥰🥰🥰 glad you dig it

Please let this man learn how to set up guitars. He would have a monopoly

@VertexEffectsInc

2 жыл бұрын

I'll leave that to the pros :)

AmaIng rig here Mason. I’d like to know what’s the significance of placing the steel string after the drive session? Is it an always on pedal in this case?

@VertexEffectsInc

Жыл бұрын

It's emulating an amp tone of a Dumble, normally you'd run your drives into the amp, not after it.

why would the EP booster go after the other distortion pedals? Not asking to be antagonistic; I've never owned one but have seen stuff about it, just always assumed it was meant to go first. Are you trying to simulate where you'd put an echoplex in your chain?

@VertexEffectsInc

3 жыл бұрын

Using it as more of a post gain boost as the SS pedal will be always on presumably.

Haha I flip the boss bottom plates over too

@VertexEffectsInc

3 жыл бұрын

It’s the move!!!

Great video! Would you change anything on the pedalboard for John Mayers song Last Train Home?

@VertexEffectsInc

2 жыл бұрын

You'd need chorus and digital reverb.

@jimfbailey

2 жыл бұрын

@@VertexEffectsInc thanks for your response! I have everything including the steel string. My assumption is that he would leave that on all the time and turn on the tube screamer for the solo?

❤️

@VertexEffectsInc

3 жыл бұрын

🥰🥰🥰

I’m super late to this video but is there any way I could know what model of strat is played in this video? It sounds unreal. Great rig build

@VertexEffectsInc

2 жыл бұрын

Fender Custom Shop Rory Gallagher Stratocaster

Didn’t know about that pedal trick.

@VertexEffectsInc

2 жыл бұрын

Nice!

I just bought the Vertex Steel String MKII and like it a lot! I'm running it in to a TS9 (Analogman 808 mod) followed by the OCD, then Xotic EP. I'm not sure about keeping the ep booster on my board. My question though if the Steel String going in to a tubescreamer, ocd, is correct. It sounds fantastic to me but, wanted to ask the question. Thank you in advance.

@VertexEffectsInc

3 жыл бұрын

If you’re treating the Steel String Pedal like an amplifier, it would make more sense to put it after the TS9.

@donwhitesel12

3 жыл бұрын

@@VertexEffectsInc Thank you! It's a great pedal and adds a huge amount of head room to my Fender Bassbreaker 15W. When I hit the TS9, the OCD, and Vertex together on a lower gain setting It's absolutely incredible. I tend to run the Xotic EP by itself. When I just want some color and more valume with modulation.

@donwhitesel12

3 жыл бұрын

@@VertexEffectsInc Currently I have the Vertex, TS9, OCD stacked running in to a clean Fender amp. I'll put the Vertex in back of the OCD. So the TS9 & OCD are hitting it.

Great board build, what did you use to make the pedalboards flooring a completely flat surface Mason?

@VertexEffectsInc

3 жыл бұрын

Some 1/8” sheet metal

@RobertNolan

3 жыл бұрын

@@VertexEffectsInc masonite opportunity missed 🤣 Still a very cool pedalboard though bro, great video.

@VertexEffectsInc

3 жыл бұрын

🥰🥰🥰

WHERE IS YOUR CANDY FROM SWEETWATER!!?? Seriously... every order I have ever placed with the good folks at Sweetwater has included a baggie of mixed candy. It's a really cool little extra they do. Of course I have a fairly major sweet tooth. Shout out to Ed Needler ... my 'go to' sales engineer at Sweetwater! ... ... now I'll watch the rest of this cool video.

@VertexEffectsInc

3 жыл бұрын

We’ll send the bag with the board to the winner 🤣🤣🤣

Can you post up a real good Jimi type board?

@VertexEffectsInc

Жыл бұрын

You'll have to watch my "What's On Your Pedalboard" on Sweetwater's channel coming out soon. Very Jimi.

Nice rig and great content. Is the chord progression and turnaround at 12:17 what I think it is? Either way I dig it.

@VertexEffectsInc

3 жыл бұрын

not sure, maybe hit up Tim Marco on IG?

@jpatrickgreen

3 жыл бұрын

@@VertexEffectsInc Right on man. Will do.

@VertexEffectsInc

3 жыл бұрын

@@jpatrickgreen 🥰🥰🥰

Why did you put the Steel String further down the chain? I could quite catch what you said in the video

@VertexEffectsInc

3 жыл бұрын

Treating it like an amp I put it last before the delay

@jpatrickgreen

3 жыл бұрын

@@VertexEffectsInc Thanks for clarifying because I missed that as well. Was thinking in that case just switch spots with the EP but now I get it.

@VertexEffectsInc

3 жыл бұрын

@@jpatrickgreen perfect!

Great Video! But couldn't you just flip the backplate of the Boss TU-3 with the rubber on, or isn't there enough space inside the pedal? :D

@VertexEffectsInc

3 жыл бұрын

It's not a universal thing on all Boss pedals, and I'm attempting to generalize this technique no matter the Boss pedal. Many of the Boss pedals won't allow this because the mezzanine board with the pots push the main board right to the edge of the enclosure, where the tuners don't have any pots to deal with so there is more space inside.

This is a great little rig! I'd for sure want to add a looper, reverb and perhaps some chorus, but there's also still plenty of space on the interface and power supply. Anyways, amazing build as always, Mason!

@VertexEffectsInc

3 жыл бұрын

Thanks for watching

What is the interface box, what does it do, and is it necessary for every board? I always see so damn much stuff I do not understand!

@VertexEffectsInc

Жыл бұрын

Not required just makes it easier access to the board input and output.

So is the steel string considered a clean boost or an overdrive?

@VertexEffectsInc

3 жыл бұрын

Somewhere in between