The draw of the mega-factory is irresistible, no matter how many times you remind yourself of the performance cost and the impracticalities, you keep coming back.

Great video. Update 8 is fun (yay for flying), but there are also issues with missing nodes and things not working exactly as expected (trying to connect a machine to a belt often ends with the belt at a weird angle forcing you to delete it and do it over and over).

@coolersmoke

11 ай бұрын

Flying is definitely a HUGE bonus. I can lay down things like splitters & mergers so much faster and more accurately!

Really great video - one suggestion that worked well for me: I set up 4 Blueprint Designers next to each other. That way I can design both the Left/Right hand side of the blueprint at the same time, as well as the left/right bottom floor logistics. Might be easier for you to demo your blueprint designs if you have the multiple designers up at the same time

@LancelotSwe

11 ай бұрын

I did that with a turbofuel-blueprint. So with a few clicks I take 30 oil in and get turbofuel. Just need a few connections. But I do it upwards :)

@PaulReed

10 ай бұрын

That's ... why does my brain not work that way? I made a super inefficient single blueprint that produces modular frames all from iron ingots and felt like a GOD until now.

@LancelotSwe

10 ай бұрын

@@PaulReed I can send you blueprints if you want to see?

@PaulReed

10 ай бұрын

@@LancelotSwe Given how efficient the turbofuel powered generators run I would very much like to see! I tend to build what I need as I need it so everything is a bit of a mess. I've already rebuilt once and it got out of hand again haha!

Awesome Episode! This Save gets more and more Epic 😊 Can't wait for the next One!

Oh the changes to u8 in blueprints is AWESOME. I would never go back.

You convinced me to switch to update 8, cheers for your efforts

I absolutely love the idea of using smart splitters on a manifold to scale the number of active machines to the resources coming in. That never occured to me but i plan to try it

@StrifeA217

6 ай бұрын

I actually prefer to do this with my coal power plants, it just makes for a cleaner start up cycle. and if I accidently put to many down then it stops it at the belt limit and doesnt spit and sputter with power fulgurations. If im not running enough for whatever reason it spits the resource out and I can either sink it or use it for another purpose without it disrupting my power situation like you would get with a normal splitter. I did this with compacted coal once and was trickling out gunpowder, it eventually filled the container and then the extra just trickled into the sink.

... as always, ch.

man, watching you use sinks to keep everything "always on" I am assuming makes me want to redo my world haha Do you have a video of you building your train lines? I have always admired the curves and I struggle with this in my own world. Would love to see that if you have it.

Satisfactory has been the only instance of something in life that's made me wish I was more diligent when it comes to making sure my maths is correct.

Looks an awful lot like how I make my refinery setups. Slight differences. But looks good.

Would t it be more efficient to use the alloy recepie for iron and pure for copper?

@daveisnothere

11 ай бұрын

As far as space, power and number of machines needed to process the ore the alloy recipes are much better, esp copper, pure copper is insanely huge compared to the alloy recipe. To make 1000 copper ingots it is 27 refineries, 400 copper ore, 266 water, 795 mw for pure or 10 foundries, 500 copper, 250 iron, 160 mw for copper alloy. With liquids being as temperamental as they are I don't like the pure recipes at all. Iron is closer, pure is 540 iron, ore, 300 water, 16 refineries and 455 mw and alloy is 400 copper, 400 iron ore, 20 foundries and 320 mw.

@halbouma6720

10 ай бұрын

@@daveisnothere Just to add on your answer, there's so much iron on the map I find it hard to justify using anything but smelters unless there's some special case - like you have 300 iron ore you need to double and you just happen to have water there. Even if you overclock the smelters to 250% for 75/min (higher than pure iron at 100%) its still using less than half the power of a refiner (plus the water extractor/pumps). Copper alloy is a beast though and its far more scarce so I don't mind burning iron and like you said water sucks. lol.

The "pure" receipes are utterly powerhungry indeed.. Time to expand the powergen part of the factory !

@daveisnothere

11 ай бұрын

About 5 times as much power as the alloy alternate setup.

How does he create those holes in the ground floor that the elevators use?

@Creophilia

2 ай бұрын

I hope you found out by now, but if not, look for the awesome shop under «special» in the build menu. The foundation holes can be «bought» there with the ingame currency «tickets»

megafactory project?? nice!!!! But... mark4 belt? why? why didnt you plan for mark5?

@nunolourenco6177

11 ай бұрын

0😊

@matt69nice

11 ай бұрын

Building a megafctory with mark 4 belts does feel like a bit of an oversight

@justinwhite2725

11 ай бұрын

I don't think he has unlocked it yet.

@TotalXclipse

11 ай бұрын

It's not unlocked yet. 😅

@kzar99

11 ай бұрын

@@TotalXclipse plan for mark 5 - not use mark 5 😉. You will need more than double the current allocated space if you want to have your ingots produced in one place

⚒

Question guys, how is he managing to have so much flat terrain? On my save there is so many hills I dont have much space for build. Im newbie

@TheMrCurious

11 ай бұрын

They are building a flat terrain above the natural terrain.

@cunnipa

11 ай бұрын

He’s building on water. You can leave the starter area and seek out areas with more open space.

@jaymorrison2419

11 ай бұрын

He is building out on the west coast of the map, above the water. Another good area for flat-ish is the North East desert, which you can pave over with concrete fairly easily.

Im pretty new to the game. This is definitely a noob question.. do you need water pumps to feed the refineries water?

@harrybudgeiv349

11 ай бұрын

Yes, though the number of water extractors depends on the recipe you use.

c est beau

How do you fly ?

i want to build 2*2 or 3*3 or... fundation in zoop mode. help me please🙏

@dangus2965

11 ай бұрын

use blueprints to build a 2*2, 3*3, 4*4 etc foundations and place accordingly. cant zoop from what I know.

@GnomBoom

11 ай бұрын

sadly blueprints cant be zooped

@Bademjoon0

11 ай бұрын

@@dangus2965 but i see someone to build 2*2 to 10*10 in zoop mode

@mikoajolempijuk9180

11 ай бұрын

@@Bademjoon0 mods

@ForsakenFenix

11 ай бұрын

closest thing to zoop for blueprints is switching build mode to blueprint from default, this makes the blueprint snap to the existing blueprint. I can just walk forward then click the mouse the second the blueprint snaps in place.

Pst you dont have to restart for update 8.

@TotalXclipse

11 ай бұрын

I'm not restarting for update 8... Like I mention in the video 😅

first?

@cartoonkeeper

11 ай бұрын

Congratulations here's your Internet cookie 🍪 try not to eat it all in one place

"...as always, ch-"