Thank you so much for thoroughly explaining the measurements of the glass panels with a visual! It helps my autistic brain wrap around the concept so much easier. 😂

@norwichreptileshed

9 ай бұрын

I'm glad it helped! There is a more detailed and better filmed one on my channel also. It's called "how to measure glass for a vivarium"

Use painters tape on the lines that you are cutting and you’ll end up with less tear out

@norwichreptileshed

Жыл бұрын

That's a great tip and I do for stuff like melamine and worktops but this blade was particularly knackered and I didn't know until that first cut! Nice new blade on it now ☺️

@JMX07

Жыл бұрын

Wish I had followed your advise!

@petermport

6 ай бұрын

Just to add to malelpn37's comment, You should also set the depth of the blade so it just pokes out the other of the board

Like your content brother in reptiles! Cool you English used the metric system easier for me to follow. Building myself enclosures for more than 50 years now, started with old furnitures. I prefer to fix the airing holes with fine stainless mesh before glue and screw the hole cage...God's Blessings from Northern Germany Ludwig.

Great video bud. Always enjoy building new enclosures. It’s great watching other peoples building skills and different designs. I also build all of my large enclosures it definitely saves alot of money specially when building giant monitor enclosures. That’s awesome how you made that for a pair of leopard geckos 🙌. Keep up the great work bud 🙋‍♂️✌️

@norwichreptileshed

2 жыл бұрын

Thanks mate!

I love this! I'm repurposing a large entertainment stand/shelf but was pretty intimated by making the sliding doors. I think I can do it now.

@norwichreptileshed

8 ай бұрын

So glad it helped! Good luck with your build

This is an outstanding tutorial, and the enclosures are top notch. Great work, and thank you for this.

@norwichreptileshed

Жыл бұрын

Thank you! Glad you found it useful

Thanks for the great video! You make it simple, while still being everything a reptile could need. And this video is helping me to see that I can do this, too! I tend to overcomplicate things, so I needed this! : )

@norwichreptileshed

2 жыл бұрын

Thank you! I'm really glad it helps!

I have been trying to find a good video that goes over how to make a tank and this is the one I’m going to go with. You lay it all out and show how to do everything without making it look like I need to be an expert. Thank you.

@norwichreptileshed

2 жыл бұрын

I'm glad you found it useful!

Good video and gives me more confidence in tackling a project myself. Keep up the good work!

@norwichreptileshed

2 жыл бұрын

Thanks! Good luck with your builds!

Thanks for explaining how you come up with the measurements of the glass doors so they fit the tracks. The other diy videos I've seen skip that step.

@norwichreptileshed

Жыл бұрын

My pleasure! Glad it can help

Absolutely love this been searching for videos this is perfect great work

@norwichreptileshed

Жыл бұрын

Thanks! Glad it could help

I’m building a viv and needed help working out glass size, you’ve helped loads with a simple diagram and advice, cheers‼️

@norwichreptileshed

Жыл бұрын

Glad it helped! Good luck with your build

thank you for a great simple way to do it. cheers

@norwichreptileshed

5 ай бұрын

No problem! I'm glad it has helped

Brilliant video 😊

@norwichreptileshed

2 ай бұрын

Thank you!

Great video and tips Jamie

@norwichreptileshed

2 жыл бұрын

Thanks buddy

great info mate cheers

@norwichreptileshed

Жыл бұрын

Thanks!

Impressive build. What kind of sliding door track do you use for the larger terrariums, like at the beginning of the video? I was wondering if he plastic door track is strong enough for heavier glass

@norwichreptileshed

Жыл бұрын

Thanks! I use the exact same product and technique for the bigger builds too

Brilliant video, appreciate a british video with british prices and sites for once! Quick one, I'm looking to make a high humidity vivarium with wood (I know PVC is recommended but it's too expensive), havr you ever used liquid rubber to protect the wood? Or what would you recommend?

@norwichreptileshed

8 ай бұрын

Glad you found it useful! I personally haven't used that product but the safest way in my opinion would be to coat the entire inside with a pond epoxy like Pond Paint.

Hi great video may I ask does the wood Stan protect plywood from swelling an expanding with the moisture build up? Want to make my own vivarium

@norwichreptileshed

Жыл бұрын

Thanks! The wood stain does protect but I also add a water based varnish inside plus glueing the joints and sealing with silicone. I have also made a video on how I like the substrate area to add even more protection

Thank you for the tutorial. Any issues with rot from moisture in the enclosures?

@norwichreptileshed

5 ай бұрын

Glad it helped! I've had no issues with rot, I always have good thermal cross ventilation and I protect the substrate areas with plastic floor protection sheeting.

This video is great, thanks for sharing. I'm looking at building a custom unit for my ball python and am a bit worried about the wood Vs humidity. Do you think I should line it with something or protect the wood in some way? 😊🙌🏼

@norwichreptileshed

Жыл бұрын

Thanks! Plywood that has been sealed in some way will be ok with the humidity but I recommend lining the substrate area with a material that will stop moisture getting to the wood. I have a video all about in this channel, it's called 'waterproofing a wooden vivarium' hope you find it useful!

@jemsjournal

Жыл бұрын

@@norwichreptileshed amazing, thank you so much ❤️

Sorry I commented previous video, browsed the channel and found this which is much more relevant for me! Do you notice by any chance that the weight of them does cause a bow on the vivs underneath? Mine are either shop bought or Facebook tidied up, but they don't seem very strong long term. Is this simply down to the type of wood? As I noticed you mentioned hard wood

@norwichreptileshed

Жыл бұрын

Hi, this design and type of wood makes them much stronger than the melamine versions that shops sell. A 4x2x2 shouldn't bow and if I was stacking bigger ones then I would add lengths of timber between them

The most helpful video on this topic, but how do you do your heating?

@norwichreptileshed

4 ай бұрын

Thank you! Heating is quite specific to the species being housed, I have tons of different videos explaining the different set ups I have though.

Thanks for the video, very helpful! I am making a very similar sized Vivarium for 2 adult sized bearded dragons, that I am hoping will breed. This is all for my sons. I am wondering, what sized heating lamps would you need for this size vivarium? And UVb light? Thank you!

@norwichreptileshed

Ай бұрын

Hi, I would be using a 2ft 24w 12% T5 uvb and 75/100w halogen heat lamp, I couldn't say for sure as it depends on other factors like outside temperature and ventilation, you'll have to to do some tests before putting the animals in.

I might consider making my own if it works out cheaper than buying one flat pack cheers for making this video, although I may have to make mine 4x3x3 as i want a bearded dragon

@Rose-_-18

4 ай бұрын

Tbf looking at this again I think a 4x2x2 should be big enough

@norwichreptileshed

4 ай бұрын

Bigger is always better in my opinion! If you can fit a 4x3 in then you should definitely make one. The construction is the same just add the extra numbers to a 4x2 plan

Honestly love having more than one drill so your not faffing around swapping over drill bits constantly lol

@norwichreptileshed

Жыл бұрын

Oh if you can have an impact driver and a drill your day will be 1000% easier!

@Kira-kg4kl

Жыл бұрын

​@Norwich Reptile Shed we've got all sorts of tools tbf I probably have one, my husband is a carpenter, if I ask for a specific tool it normally materialises 😂 The awesome one is having a track for the circular saw so you don't have to make a guide and it auto cuts up to 12 ft sheets MUWAHAHA ❤

Can I use an under tank heater on my wooden vivarium it has good airflow I’m just worried it won’t heat through the wood then the substrate I’m going bio active so I need about 3 inches of substrate and for a leopard gecko so preferably on the bottom! Thank you

@norwichreptileshed

2 жыл бұрын

Hello, an under tank heater won't work with that much soil. I would recommended a halogen heat lamp on a thermostat, it's the best option for leopard geckos also.

If you have time, I would also love some advice on the heating pad? (I am in Zimbabwe so will order off of ebay to be brought out with a courier). Thank you so much!

@norwichreptileshed

Ай бұрын

Sorry I can't help you there as I don't use heat pads, all my enclosures are heated with halogen lamps.

I am very curious to know the long term effects of the stain on the creatures in question. That stain can be a harmful substances if it bleeds out of the wood while animals are in there. Also, it won’t protect against humidity in the long term. The chemicals can seep into the air over time. Curious how this all turned out. It looks good for sure. This is genuine curiosity. I’ve been a wood worker for years. For all you out there who just troll, don’t. It’s not productive or helpful.

@norwichreptileshed

Ай бұрын

Hi, I seal the insides of my vivariums with a water based varnish that is toy and food safe. I've had no issues in the 4 years they have been running for.

Great video. Thank you. Does the stain seal it?

@norwichreptileshed

Жыл бұрын

Glad you enjoyed it! The stain definitely adds a layer of protection but I always varnish the inside too

@DanielNelson

Жыл бұрын

@@norwichreptileshed ah I missed that part.

@norwichreptileshed

Жыл бұрын

I may not have mentioned it in this video as it more about the build, but I have tons more useful videos including how I line the substrate area to create even more protection.

New subscriber here pal

@norwichreptileshed

Жыл бұрын

Welcome aboard! Hope you enjoy the videos

Cool vid, one question though, why not seal the inside to prevent the wood from rotting?

@norwichreptileshed

Жыл бұрын

Hi, I mention in this video that it has two coats of stain plus a varnish. My other videos go much more into detail about protecting the wood and I have a whole video dedicated to lining the soil level 👍

@viciouscube3321

Жыл бұрын

@@norwichreptileshed ah gotcha, cause I was gonna say great build but it wouldn’t last long lol. Omw to watch that video 👍

Good video, I just can’t find the sliding rail on eBay? What is the exact name of you don’t mind

@norwichreptileshed

Жыл бұрын

Hi, thanks! They come up if you search "glass track runners"

Does that stain help from keeping consistent moisture out? I’m working on an iguana cage and I can’t find a stain or a applicant to keep that moisture out from the wood so no bacteria or mold grows

@norwichreptileshed

5 ай бұрын

The stain would definitely help but I also use varnish after

I do have one question... where do you get the glass for these? 😅 I can't find glass anywhere

@norwichreptileshed

2 жыл бұрын

Have a Google for a local glazier and I'm sure they'll sort you out. If not you can order online at places like Norwich glass company but it'll cost you more

@sambradburyfx

2 жыл бұрын

@@norwichreptileshed okay cool I will have a look around and see what I can find! Thanks

you mentioned about the glass size, just to clarify, is it 390mm x 625mm? cheers

@norwichreptileshed

Жыл бұрын

That's the size I ordered but like I showed later, I messed up the width so they should have been 390x605. That being said I strongly recommend you measure your own gap and don't rely on my measurements. A few millimeters here and there with the cuts and joints plus maybe a different brand of glass runner track will make a difference to the gap.

Can you show what lights fixtures you use in that set up 4x2x2? and how you set them up

@norwichreptileshed

Жыл бұрын

Lighting depends on what species is going to be housed inside. This particular vivarium was for our bearded dragon so used a 24w t5 12% lamp and an led flood light, I show this in our bearded dragon video. It will be different set up for my next 4ft build which will house leopard geckos.

@Arty_McParty

Жыл бұрын

@@norwichreptileshed Bearded dragon , okay i'll stay tuned :) thank you!

Im looking to build a vivarium for a ballpython what would you use to seal the plywood from the humidity

@norwichreptileshed

6 ай бұрын

I have tons of videos explaining all my methods of protecting plywood but a quick answer would be stain and varnishing the wood and sealing the joints with silicone.

Stupid question? What kind of snake is that green one? Beautiful Snake!

@norwichreptileshed

22 күн бұрын

That's a Boiga cyanea or Green Cat Snake

@jhermaineharris2142

22 күн бұрын

@@norwichreptileshed very beautiful. Thank you for replying.

I use inches where I'm from. An easier way is to just measure 1.5 inches shorter then what you want. So if you want 24 inches you would measure 22.5.

@norwichreptileshed

Жыл бұрын

I'm assuming you are referring to my circular saw spacer? Life isn't that simple over here 🤣 we switch between mm, cm and inches and rarely work in round numbers.

Hi may i know what thickness you use for the woods?

@norwichreptileshed

5 ай бұрын

18mm plywood

What type of wood did you use?

@norwichreptileshed

Жыл бұрын

Around the 5 min mark I talk all about the wood 👍

How would i heat it on the bottom? Heat tape under the wood?

@norwichreptileshed

Жыл бұрын

Hi, I don't heat any of my vivariums from underneath so I couldn't advise what works or not.

Is there no need for waterproofing the wood due to high humidity that would be in the vivarium? I'd assume it would other wise lead to wood rot no?

@norwichreptileshed

11 ай бұрын

Hi, I personally use two coats of stain and then varnish on top of that, I then seal all the edges with silicone and protect the substrate area with a plastic floor protector.

@samuelcutajar9565

11 ай бұрын

@@norwichreptileshed oh ok thanks 👍

can you stack these or will they warp

@norwichreptileshed

Ай бұрын

I stack mine, although if you plan on using a lot of soil substrate and rocks ect it's best to use timber between just be on the safe side

Hello , I am making 1800mm X 1000 mm X 600mm reptile vivarium .... Can you tell me if 4mm glass is enough for Boa snake ?

@norwichreptileshed

2 ай бұрын

I think 4mm toughened glass should be fine

Where do you order your glass from?

@norwichreptileshed

Жыл бұрын

My local glazier has a website that I can order from but any glazier would be fine. I use Norwich Glass Co

What stain did you use?

@norwichreptileshed

9 ай бұрын

Ronseal quick drying exterior

How do u put ur lights in

@norwichreptileshed

Жыл бұрын

Most of my lights are screwed to the ceiling but I have tons of videos showing the process I use specifically for a species I keep on my channel.

how thick is the wood?

@norwichreptileshed

Жыл бұрын

Hi, it's 18mm

how about you show how to install the lights and hide cables please

@norwichreptileshed

Жыл бұрын

Hi, I cover electronics on the more specific builds on this channel. I show it on my royal python, Northern Pine snake and false water cobra builds

Where do you order your glass from buddy

@norwichreptileshed

Жыл бұрын

I use a local glazing company with online ordering called Norwich Glass co but any local glazier will work.

@ashtimbers7183

Жыл бұрын

What are the measurements of the glass bud?

How much did it cost

@norwichreptileshed

Жыл бұрын

About £100

What wood was it please mate

@norwichreptileshed

Жыл бұрын

18mm hardwood faced ply

@_tinyterrarium634

Жыл бұрын

@@norwichreptileshed thank you

Is there any point whatsoever in co habbingnleopard geckos though?

@norwichreptileshed

Жыл бұрын

I have two sisters that were hatched together and have lived together for 8 years with zero issues. Housing two females is generally considered ok with the correct space and husbandry requirements.

Wow British tape measures look weird !

@norwichreptileshed

Жыл бұрын

We measure in metric and buy timber in imperial, it's a mess! 😂

What stain did you use and where was it from?.

@norwichreptileshed

9 ай бұрын

I use a Ronseal wood stain which is available at most diy shops, I use wickes for most of my stuff.

Did you say you're putting *two* leopard geckos in one vivarium?? Cohabbing is quite unsafe and unnecessary.

@norwichreptileshed

Жыл бұрын

Hi, this isn't the place to discuss Leo's but I will be having a video covering a build coming in summer. I keep two females together, if done correctly it is perfectly safe and can be considered beneficial due to recent wild studies finding these geckos living in loose social groups.

@clsicgrl81

9 ай бұрын

No need for a locking door? Sorry to ask, just new to snake keeping. And the heating element is a bulb? Can you put a heating pad on the bottom?