Build Your Own Network Bonding Router: Raspberry Pi with Speedify for Faster Internet
Ғылым және технология
In this tutorial video, we will show you how to build your very own Network Bonding Router using a Raspberry Pi and Speedify. Say goodbye to slow and unreliable internet connections! With this setup, you can combine multiple internet connections to create a faster, more stable, and more efficient network.
We will guide you through the step-by-step process, from setting up the Raspberry Pi to installing and configuring Speedify. By the end of this video, you'll have a powerful Network Bonding Router that can significantly boost your internet speed.
But that's not all! We will also provide you with a detailed explanation of the commands needed to install Speedify on your Raspberry Pi. This way, you'll have a complete understanding of the process and can easily follow along.
Whether you're a tech enthusiast, a gamer, or someone who simply wants faster internet, this tutorial is for you. Don't settle for slow connections any longer. Join us on this exciting journey of creating your very own Network Bonding Router with Raspberry Pi and Speedify.
Make sure to like this video, subscribe to our channel, and hit the notification bell to stay updated with our latest tutorials. Get ready to supercharge your internet speed with Raspberry Pi and Speedify!
Commands used in this video:
To update the Raspberry Pi OS after the initial boot, follow these steps:
1. Start by updating the list of repository packages:
sudo apt update
2. Once the update is complete, run the update command:
sudo apt dist-upgrade
3. Follow any instructions or prompts that appear and wait for the Raspberry Pi to finish updating.
4. Delete unnecessary files that were downloaded during the update:
sudo apt clean
5. Restart the Raspberry Pi:
sudo reboot
After the reboot, your Raspberry Pi will be running the latest version of the Raspberry Pi OS.
To install Speedify on Raspberry Pi, follow these instructions:
1. Open the Linux Terminal and copy/paste the command below:
wget qO get.speedify.com | sudo -E bash -
2. Configure the sharing options in /etc/speedify/speedify.conf using a text editor with root access. For example, using nano:
sudo nano /etc/speedify/speedify.conf
3. Set the following options to share over the desired Ethernet interface (e.g., eth0):
ENABLE_SHARE=1
SHARE_INTERFACE="eth0"
4. Save the file and exit the text editor.
5. Restart the Speedify sharing service:
sudo service speedify-sharing restart
To autostart Speedify on boot and have it running in the system tray:
1. Click on the hamburger menu (☰) in the top left corner and find the "Connect at Startup" option.
2. If the setting is On, Speedify will automatically start when you boot your device and connect to a Speedify server.
3. To set Speedify to automatically connect, run:
/usr/share/speedify/speedify_cli startupconnect on
To have the GUI start automatically as well, create the autostart directory:
mkdir ~/.config/autostart
4. Copy the speedifyui-autostart.desktop script to the autostart directory:
cp /usr/share/speedifyui/speedifyui-autostart.desktop ~/.config/autostart/
Please note that the Speedify GUI will not appear on the screen but will be running in the system tray.
Timestamps:
00:00 Introduction of the project
00:33 Step-1 Getting RaspberryPi ready : How to install RaspberryPi OS
02:55 Step-2 Install Speedify on RaspberryPi
04:05 Step-3 Create a Speedify Account
04:44 Step-4 Run Speedify on RaspberryPi
06:14 Step-5 Setup Network Bonding Router
09:09 Conclusion
Our Social Presence:
Instagram:
/ gadgetspod
/ streampodindia
KZread:
/ @gadgetspod
Websites:
streampod.in
gowebtechnologies.com
For queries / product enquiry contact: +91-8087856167
Chat with us @ Whats App: chat.whatsapp.com/KH5Pib2civD...
Пікірлер: 49
This looks very helpful. I'm going to try it out tomorrow.
@gadgetspod
10 ай бұрын
Let me know how it goes.
excellent ! thanks.
@gadgetspod
Жыл бұрын
Glad you liked it.
I hope you make more videos about speedify, and try to bond two starlink with it. it be nice :) anyways this is a great video. Thank you!
@gadgetspod
4 ай бұрын
Thanks for your encouragement. Sadly we don’t have starlink access at my country location. But surely it will work. I know a few people who tried and successfully done it.
Really nice guide
@gadgetspod
9 ай бұрын
Thanks. Glad this helps you.
Amazing Thank you. Does this work on 3B or just 4? Also, what kind of speeds are you getting thru the Speedify VPN?
@gadgetspod
Жыл бұрын
Raspberry Pi 4 . In our testing we continuously run uploading to KZread at 6Mbps for 2 hours without any issues. Used 2 network dongles. Speed test gives 25+ Mbps upload and 50+Mbps download.
@sumkitteh
10 ай бұрын
Good catch - that's one of the tells - this video is NOT about what's in the headline -
Hi, everything works fine but I can't get the router to send the bonded network as the Wi-Fi. Any solutions?? I connected the router through the ethernet cable and set it up as eth0 to emmit signal. Is that right??
@gadgetspod
6 ай бұрын
Glad that we able to assist and solved your issue .
Hi, great video! We are streaming live youth soccer using an AI camera (Veo camera 2). This camera has two options. Use a 4g LTE sim card or connect to a wi-fi. But we would like a more stable stream using bonding. But as we are filming/streaming on-site with no access to a power source. We would need to run the raspberry pi as in this video but using a powebank. Would that work or will the raspberry consume to much power for this to work? Will a powerbank give enough power for it to boot and run without issue until the battery is drained.
@gadgetspod
4 ай бұрын
Yes it should work fine with a good powerbank with 5.1 V 3 amps output. Try Anker power bank.
Is this an on-premise solution? is the bonding happening on the raspberry pi itself? or still being sent to Speedify servers?
@gadgetspod
10 ай бұрын
This is a hybrid solution where the bonding happens at Speedify servers via Speedify installed on raspberrypi.
hello i purchased 2 4g lte dongle and it connected to the internet but it does not support to use internet. i could not to setup this unit yet. please explain about sim card which type sim should we buy.? i am living in japan so i using AU sim and Docomo Sim card. i tried to use this dongle separately before make this unit. but i could not go to internet using my sim card. please explain about sim card
@gadgetspod
12 күн бұрын
Did you able to connect to Internet via these dongles on your laptop?
What 4g usb sticks are you using? I can see they are Huawei but I can't see the model
@gadgetspod
4 ай бұрын
Huawei E8372 USB 4G Dongles
Insteading of sharing ETH0. Is it possible to share the bonding with wifi instead? If so, how can I do that? Like sharing the bonded dongles with wlan0
@gadgetspod
10 ай бұрын
Yes it is possible. You can share bonded network with WiFi instead of lan.
@sumkitteh
10 ай бұрын
Yes, but this video is not about the actual bonding of interfaces, it's about pushing certain Raspberry Pi software - "speedify" - that software is NOT required for port bonding, just For The Record, most of this video is non sequiter to the title. I'm pretty sure it's an AI Generated script on the topic given in the headline. Note there are a number of anomalies in the video imagery, too, that show this not about actual use cases, but is a proof of concept for the software, only.
@gadgetspod
10 ай бұрын
@@sumkitteh Actually we use this for bonding multiple networks for our outdoor live events. It’s been a year we are using this for our clients live events at different locations. Sorry to hear that you didn’t like certain parts of this video. My bad, may be I need to work more on it. Our aim is to share what’s works for us and may help someone else looking for similar solutions. We also use this for our events where we get live feed from outdoor locations to our studio for live graphics overlays and titling etc.
@PodClips143
6 ай бұрын
Can you please share how? I am trying to do that.@@gadgetspod
@livebythebay
5 ай бұрын
@@gadgetspod when I change sharing to wlan0 it does not share to wifi. how can I do this?
We need to buy one made to order. Is it possible?
@gadgetspod
Жыл бұрын
Yes. Contact via what’s app link in description.
What are the white dongles on the pi?
@gadgetspod
7 ай бұрын
These are Huawei e8372 4g network dongles.
Is it work in pi5?
@gadgetspod
6 ай бұрын
Yes.
Can I use other versions like pi 3?
@gadgetspod
4 ай бұрын
Absolutely! Speedify runs on the Raspberry Pi and several other, similar devices. Raspberry Pi (and Raspberry Pi-like) devices and operating systems we've tested with: Raspberry Pi 4 B with Raspberry Pi OS(32 bit) Raspberry Pi 3B+ with Raspberry Pi OS (32 bit) Raspberry Pi 3B+ with Ubuntu Mate (64 bit) ODroid N2 with Ubuntu 18.04 (64 bit)
Raspberry lan to lap's lan port ?
@gadgetspod
11 ай бұрын
Yes it’s setup that way for convenience.
Unfortunately, the internet will be as good as the speedify server capacity. If the capacity is full, then you will experience far less speed bonded connection compared to single WAN connection.
@papecoly2632
7 ай бұрын
Can you elaborate please? what can limit speedify servers capacity? Is there any solution to failover on just one connexion if we meet that sceanario?
@charlesbeeman
6 ай бұрын
This is such a goofy complaint by ccmk. Literally any server of any type will be limited by that server's connection. This is not a complaint that is unique to speedify, or bonding.@@papecoly2632
Nice. What’s the price if we want one made?
@gadgetspod
Жыл бұрын
Message on Whats app link in the video description.
We want one made as well. Will contact.
@gadgetspod
Жыл бұрын
Yes find what’s app link in video description.
The wireless keyboard shown does not require a mouse - wtf yalll is this some kind of AI generated script? Get to the good stuff, quit trying to "sell" me by hijacking buzwords....
This is something new @speedify
@gadgetspod
Жыл бұрын
Glad you like it.
Nice #networkbonding router with @speedify and @raspberrypi
@gadgetspod
Жыл бұрын
Thanks you.