Build Your Own DIY Radar System Using Arduino: A Step-by-Step Guide!
Ғылым және технология
In this tutorial, we'll walk you through step by step how to assemble the components on a breadboard and how to program the Arduino board. We'll use the Arduino IDE to write the code that controls the servo motor and the ultrasonic sensor. By the end of this tutorial, you'll have a fully functional radar system that can detect objects and display their distance on the serial monitor.
*THIS IS A SONAR NOT RADAR
Component Required:-
1. Arduino Uno
2. Servo Motor
3. Breadboard
4. Ultrasonic Sensor (HC-SR04)
5. Jumper Wires
Components Link:-
1. Arduino Uno:-www.amazon.in/Arduino-UNO-boa...
2. Servo Motor:- www.amazon.in/ApTechDeals-Mic...
3. Breadboard:- www.amazon.in/Generic-Element...
4. Ultrasonic Sensor:- www.amazon.in/Robotbanao-HC-S...
Codes:-
Arduino Code :- drive.google.com/file/d/177iK...
Processing Code :- drive.google.com/file/d/1jQ9G...
CIRCUIT DIAGRAM :- drive.google.com/file/d/1aEWd...
My Website:-
scicraft90.wixsite.com/my-sit...
If you're interested in learning more about Arduino projects, be sure to subscribe to our channel for more exciting projects like this one. We hope you enjoy building your own DIY radar system and exploring the endless possibilities of Arduino!
FOLLOW ME:-
- Instagram:- / scicraft9
- Subscribe My KZread:- / @scicraft
Thank you For Watching!!
Пікірлер: 154
tried it and worked completly fine
Nice video shot, thank you for sharing it, keep it up :)
Id be interested to see something like this upscaled for more advanced radar such as doppler. Navigational doppler radar would be neat.
@SciCraft
Ай бұрын
Yeah, I've been researching that too, aiming to create an advanced radar system. If you have any valuable information on this topic, please share. It would help me a lot. Btw thanks for the comment!
Love the smoky bread-board and quite slow.. add an ASCI and more radar sensors (receivers)
Thank you! It worked!
@SciCraft
Ай бұрын
Glad it helped!
Hi, it was an interesting project. I just had one question, if I wanted to shine a laser light on an obstacle when the radar detects it
@SeyyedMahdi-pj2pi
3 ай бұрын
How will the code changes?
How to make a 360° one ?
any ideas PLEASE on how to add 2-3 random targets on the screen using radars ecuation ?( just for the code only, not for the entire project with components and stuff)
@SciCraft
Ай бұрын
can you explain that to me a little?
@alexmanolescu2567
Ай бұрын
Hello and thank you a lot! What I mean is a short simulation of a radar screen that will show or not show some targets(distance, radar cross section or even received power from target) depending on the parameters introduced by the user.(also parameters of the radar range equation, antenna gain, wavelength, transmitted power, etc) So in the end there will be displayed only the targets that fulfill the formulas requirements. What do you think? Thank you a lot ! ❤️
@SciCraft
Ай бұрын
Can you email me this with a straightforward and clear explanation? My Gmail is scicraft90@gmail.com
Hello, how can I make the radar stop spinning without having to disconnect it from my PC port?
@SciCraft
9 ай бұрын
instagram.com/scicraft9/ - This is my instagram ID , DM me
so how do i make it do things such as turn on a light when an object is detected or play a sound or start a countdown ?
@SciCraft
2 ай бұрын
To achieve that, you simply need to modify the code
life saverrrrrr
amazing only amazing thank you
@SciCraft
7 ай бұрын
Thank you so much 😊
greatest of all timeeeeeeeeeeee
@SciCraft
9 ай бұрын
Thanks bro❤️
@supreethhc2810
13 күн бұрын
Bro my motor is not rotating what is the problem
how do i make my servo go as fast as your's was cause mine is moving a bit slow
@SciCraft
3 ай бұрын
You can reach me at scicraft90@gmail.com or connect with me on Instagram using the handle instagram.com/scicraft9/
How can i use the data from the ultrasonic and make it in use not just displaying it
@SciCraft
Ай бұрын
How do you want to use it??
Thanks 🤞🏽
@SciCraft
9 ай бұрын
Welcome❤️
please help how to link the arduino IDE and the processing enviroment
@SciCraft
2 ай бұрын
You don’t have to link anything basically there are two codes - one for Arduino Uno and the other for graphical representation. To upload the code to the Arduino board, you'll need Arduino IDE. And for the graphical representation, you'll need Processing software
Hey, i built the radar right and so was the code but the board just doesnt turn on (it turns on a very low power led that indicates it is turned on but barely) and it doesnt do anything
@SciCraft
5 ай бұрын
instagram.com/scicraft9/ - This is my instagram ID , DM me!
@CursedOnFire
5 ай бұрын
Im sorry, i figured it out. Turns out the port on my pc didns supply enough power.@@SciCraft
hey, can u tell me how to change the distance range to 2 meters or 1 meter
@SciCraft
Жыл бұрын
yes, replace this line of code For a range of 2 meters: distance = duration * 0.034 / 2; For a range of 1 meter: distance = duration * 0.017; // Since we want the direct one-way distance,
@user-yg1kk4ms8f
Жыл бұрын
@@SciCraft thanks
@user-yg1kk4ms8f
Жыл бұрын
also please send me your discord or instagram i have a doubt i will send picture
@SciCraft
11 ай бұрын
@@user-yg1kk4ms8f instagram.com/scicraft9/
I have a problem with the green signal thing it doesn’t move and I tried everything 😢 what shall I do
@SciCraft
4 ай бұрын
instagram.com/scicraft9/ - This is my instagram ID , DM me!
I am doing in Mac Book and my port is /dev/c..... what should I do
@SciCraft
10 ай бұрын
instagram.com/scicraft9/ Dm me
My sensor is moving slowly. What seems to be the problem?
@champikabiyanwila7128
7 ай бұрын
My olso
got it to work but its moving very slow, how do i fix that?
@SciCraft
2 ай бұрын
It seems like there might be an issue with the voltage
Hi! what type of connector are you using for the servo motor?
@SciCraft
3 ай бұрын
Can you please clarify what you are trying to say?
@rionela_games
3 ай бұрын
@@SciCraft like what type of connector are you using to connect the servo motor to the arduino? 2:33
@SciCraft
3 ай бұрын
Female-Female jumper wires
@rionela_games
3 ай бұрын
@@SciCraft Ok. Thanks!
my radar is showing everything red but there is no object can you help me please
@SciCraft
8 ай бұрын
instagram.com/scicraft9/ - This is my instagram ID , DM me
Can you please send me the circuit diagram for this.
@SciCraft
10 ай бұрын
instagram.com/scicraft9/ Dm me
interesting that you choose to mute the actual recorded audio. This isn't radar. This is sonar, and I am willing to bet that you can hear an audible beeping form the speakers.
@SciCraft
Жыл бұрын
Yes bro this is a sonar, I had also mentioned in the video
hello can we do same project using stm32, if yes can u give code for it
@SciCraft
4 ай бұрын
instagram.com/scicraft9/ - This is my instagram ID , DM me!
My radar is showing all red even when there is no object in front of it.
@SciCraft
3 ай бұрын
Actually, this problem also happened to me while making this project. After trying everything possible, I came to realize that my ultrasonic sensor was faulty. After replacing it with a new sensor, then everything is working fine
🥺 i really need help how to add sensors gas? is it possible please helppp me
@SciCraft
5 ай бұрын
instagram.com/scicraft9/ - This is my instagram ID , DM me!
i think you should clean your breadboard once in awhile
what is the processing software? what is it's name?
@SciCraft
3 ай бұрын
Its name is Processing.
i got this code in arduino ide: Failed uploading: uploading error: exit status 1
@SciCraft
3 ай бұрын
To resolve the issue, I'll need pictures of the setup and the error. You can easily reach me at scicraft90@gmail.com or connect with me on Instagram using the handle instagram.com/scicraft9. we can work together to solve this problem.
Which program needs for code?
@SciCraft
2 ай бұрын
So, there are two codes - one for Arduino Uno and the other for graphical representation. To upload the code to the Arduino board, you'll need Arduino IDE. And for the graphical representation, you'll need Processing software
😍😍
How can I change duration
@SciCraft
11 ай бұрын
Which duration?
Is there a way to stop the servo sensor from spinning once it detects an object?
@SciCraft
5 ай бұрын
Yes, it is possible instagram.com/scicraft9/ - This is my Instagram ID, DM me
I keep getting the port busy message what to do?
@cybertronacademy
Ай бұрын
This happens when you try to send an Arduino code to a board. In this case, it is because Processing must be running therefore its using the port. So if you get this message, remember to stop the Processing code before you send the code in Arduino. Hope it helps.
thank youuuuuuuuuuuuuuuuuu
@SciCraft
6 ай бұрын
Always Welcomeeeeee❤️☺️
How to add serial port
@SciCraft
8 ай бұрын
instagram.com/scicraft9/ - This is my instagram ID , DM me
How to add a screen to display that radar
@SciCraft
7 күн бұрын
Actually, I'm working on this radar with a separate display, and I will upload soon. Make sure to subscribe to the channel.
@naitiksoni907
6 күн бұрын
Bro my servo motor is not rotating but vibrating and it's showing red in radar when there is no object also pls tell fast only few days for the tec fair
@naitiksoni907
6 күн бұрын
Pls 🥺 help
@SciCraft
6 күн бұрын
@@naitiksoni907 Please contact me at my Gmail: scicraft90@gmail.com. We will solve your problem together
goatttttttt
The parseInt(String) function does not exist. Gives a fault
@SciCraft
Жыл бұрын
In the code ?
@SciCraft
Жыл бұрын
instagram.com/scicraft9?igshid=MzRlODBiNWFlZA== dm me on instagram
@taylancelik8372
Жыл бұрын
@@SciCraft 47 and 48 processing
@CrimsonRoseBDO
Жыл бұрын
@@taylancelik8372 Same problem here. Did you solve the problem. Sorunu çözebildiniz mi hocam.
@taylancelik8372
Жыл бұрын
@@CrimsonRoseBDO bayağı bir uğraştım ama radar görüntüsü var servo hareket ediyor fakat yesil ve kırmızı göstergeler yok onlarda kodda integerler fakat hata alıyorum hala.
radar or sonar ?
@SciCraft
10 ай бұрын
It’s a sonar because the ultrasonic sensor uses sound waves to measure distance and locate the object and Radar uses radio waves to detect and locate objects but sorry to mention it as radar because most people think it is radar and search this project as how to make radar using Arduino so that's why
how far it can detect?
@SciCraft
5 ай бұрын
Upto 40cm
@user-ne9bj2yg2v
5 ай бұрын
can't it move the reach away anymore? @@SciCraft
IS good see life of inside
🥺💬 I think SciLab release code with examples of many application, I used to work with MatLab, SciLab, and scientific program there is more application from location-based. Radar is not applicable for detecting objects only but the information you can align the shape of the object and tell about how objects are related on reflection information and is it possible with assumption. Radar can help the investigation to evidence for investigation or attachment more than catch the flying bird only.
@SciCraft
Жыл бұрын
thank you so much bro for sharing such a important infomation ❤
Sonar. Radar uses radio, not sound.
@SciCraft
Жыл бұрын
Yes,you are right bro
@SciCraft
Жыл бұрын
But most people of the think it is a radar
@jasonmorgan661
Жыл бұрын
T.v. antennas used to tell me when someone was walking up to my door lol...
@jasonmorgan661
Жыл бұрын
@@SciCraftame with metal detectors but they use Eddie currents to pick up metals in those and some have actual sonar as well ....when i think of Radar i think of m.a.s.h. lol....
@tylermcnally8232
Жыл бұрын
@@SciCraftnot if you use the word sonar they wouldn't.
Well it may 'technically' be a SONAR, but.... I think focusing on that fails to recognise the really good video. It takes ages to produce quality videos. Who gives a shizzle whether it's radio waves or sound waves (Yo' momma??).... exactly! The process is the same anyway! If you'd said "Build your own SONAR" then some daft Next Tuesday would comment "But we don't all live in submarines". Great video, keep the faith!!!
@SciCraft
3 ай бұрын
Thank a lot man for your understanding. I truly appreciate it.
why is mine moving really slow
@SciCraft
2 ай бұрын
It's a voltage issue
how to install processor can you tell me
@SciCraft
11 ай бұрын
Go to this link processing.org/ and download it
Can you send me processing code in the comment
@SciCraft
10 ай бұрын
instagram.com/scicraft9/ Dm me
How can I contact you?
@SciCraft
Ай бұрын
This is my email - scicraft90@gmail.com
its good project, but the circuit diagram and video is different,,
@SciCraft
2 ай бұрын
The circuit diagram is the same, but the way of connecting things might be different
Can u send the code please ❤
@SciCraft
10 ай бұрын
Codes:- IDE:-drive.google.com/file/d/177iKPwRGpDglTV7PG5hAgFL8iY_Jm6EP/view?usp=share_link Processing:- drive.google.com/file/d/1jQ9G55sKmw-xedU3e3QEJNCIltC_npbP/view?usp=drive_link
bang kenapa pas di running kok not responding ya
@SciCraft
4 ай бұрын
Okay, you can Gmail me:- scicraft90@gmail.com or here is my Instagram ID:- instagram.com/scicraft9/, contact me.
How you did this voice
@SciCraft
Жыл бұрын
In Microsoft clipchamp video editor
isn't that a sonar sensor not a radar sensor
is the jumper wires a male-male or female-female?
@SciCraft
4 ай бұрын
I had used all types of jumpers.
:) hi
@SciCraft
Ай бұрын
Hello 👋
it is getting HOT WHAT I DO?????
@SciCraft
2 ай бұрын
Is your Arduino board overheating?
@real643
2 ай бұрын
@@SciCraft yeeeees!
@real643
2 ай бұрын
@@SciCraft what i și wrong and
@real643
2 ай бұрын
@@SciCraft is
@real643
2 ай бұрын
And processing 4 i downloaded and my PC tells "app not found"
hello brother I followed your step but my radar is not rotating plz help
@SciCraft
8 ай бұрын
instagram.com/scicraft9/ - This is my instagram ID , DM me
@AnkithAL-ei6tr
6 ай бұрын
Same bro
This is not radar…
@SciCraft
Жыл бұрын
For this is a sonar but most of people think this is a radar and search for this
@barnettb901
Жыл бұрын
@@SciCraft right, which makes this misleading AF…
@jesterking1
Жыл бұрын
@@SciCraft No, most people search for radar, and you trick them into thinking it's radar by not including the recorded sound and by misnaming the video as "Build Your Own DIY Radar System Using Arduino: A Step-by-Step Guide!" No where do you say it's sonar. The only hint we get of it is in the parts list "ultrasonic sensor".
@tubatuba5968
Жыл бұрын
You Fail! 😂😂. People are so ready to battle. Great video. I made this my first project. Turned out perfect. Thanks You!
mantap buat steammi sama pak priyo