A friend of mine that passed away several years ago. He worked in plastic injection molding. This would have put a smile on his face.

@BusterBeagle3D

Жыл бұрын

Sorry about your friend but I'm glad you think he would have liked this!

This is one of the best instructional videos I've seen.

Good job! Excellent way to repurpose pre-existing equipment, that really helps keep costs and build time down!

Been looking around for a manufacturer to make a bunch of parts for me at a price I’m not willing to pay. This is exactly the thing I need to make! Thank you sir

Before this video I had no idea how these machines work. Now I know how to build one! Amazing stuff!

@BusterBeagle3D

3 жыл бұрын

Thanks for watching!

@gertnel1602

Жыл бұрын

@@BusterBeagle3D Hi will a 160w 35x35 band heater work?

@BusterBeagle3D

Жыл бұрын

@@gertnel1602 I have used lower wattage bands in the past but they never seemed to have enough power or take too long. The 380W versions are not hard to find if you need them.

As a Process Technician in the injection molding industry i find this very cool. It's a great addition to any garage molder. It'd be cool to be able to add a reciprocating screw with a makeshift check ring to help with mixing different colors and help with heating the material.

Usually I watch a how-to video like this and think this is beyond my skill set but after viewing your tutorial I have no doubt that I can build my own Injection Molding Machine. Very well explained, two thumbs up...

@BusterBeagle3D

3 жыл бұрын

Thank you! Glad you liked it.

I am so happy I found this, I tried to do something similar with the same drill press about 2 years ago and never got it properly sorted.

Haven't build one yet, but it's definitely on the to-do list. Very nice instructions, thank you.

Just got that pid/ssr kit 50% off xD couldn't resist! I've been wanting to start this build for years! You've done a great job refining this since last I saw it. Thank you for the step by step. I hope your efforts have paid off well!

This is such a great design. The minimal use of custom parts is brilliant. I love how the nozzle is removable for easy cleaning. I built a desktop injection molding machine a while back and the barrel/nozzle was a single piece and it was very difficult to completely purge it to change plastic. I ordered the stainless steel parts right after watching this video and I'm looking forward to putting it together. Great job all around with this and thank you for sharing it!

@BusterBeagle3D

3 жыл бұрын

Thank you for the kind words and for the order! It's on it's way to you!

This is a great tutorial - I'm about half way through and still very engaged and excited about the possibilities of making and using one.

@BusterBeagle3D

3 жыл бұрын

Thank you!

@jennyclark6183

3 жыл бұрын

@@BusterBeagle3D Where do you get or how do you make the molds?

@BusterBeagle3D

3 жыл бұрын

@@jennyclark6183 Hello Jenny. If you browse through my channel you can see how I use a 3018 Pro hobby CNC machine to make my aluminum molds. I am currently looking into using SLA 3D printed molds as well.

@andersalbertsson215

2 жыл бұрын

@@BusterBeagle3D Great video- definitely interested in the SLA resin mold aspect, I have some parts that I normally 3d print but they would be a lot better off injection molded

@dhairya8238

2 жыл бұрын

@@jennyclark6183 You can contact a local business to get the Moulds / Dies C&Ced out for you. Or you can make them out of arts and crafts resin as well, to an extent.(not ideal but will be cheaper and workable)

This is by far the best tutorial I've ever seen on KZread. so simple and well explained!

@BusterBeagle3D

3 жыл бұрын

Thank you Ethan!

I just made an injection molder and it worked on the first try. I bought a puzzle piece mold for testing and made 2 parts. Thanks for a good set of instructions that were easy to follow. I did watch parts of the video a few times while building it to be sure I didn't make a mistake. Now I need to start making my own molds.

@BusterBeagle3D

2 жыл бұрын

Awesome! Glad to hear it worked out for you. Thanks for sharing!

This is absolutely amazing! I didn’t think it could be done. The skill level of hobbyists is astounding. Bravo, Sir! You have yourself a subscriber!

@BusterBeagle3D

2 жыл бұрын

Thank you and welcome to the channel!

This is amazing! Thank you especially for the demonstrations at the end. Looks like this thing works great!

Got my parts today, super excited to put this together.

@BusterBeagle3D

3 жыл бұрын

Can't wait to see other people using the machine. Please let me know how it works for you!

@TylerHarney

3 жыл бұрын

sweet! Subscribed

I was just about to make one of my own due to the high cost of a manufactured one. You saved me a whole lot of time. Thanks!

@BusterBeagle3D

3 жыл бұрын

You are welcome!

@D3nn1s

3 жыл бұрын

Just one question i have: what would you actually use it for? I would think most parts you could probably 3d print or cnc machine since you need to have cnc anyways for the molds. I get the handles shown since you could produce many of them cheaply with high strenght, but then again you can simply buy such parts

@avivharari1362

3 жыл бұрын

@@D3nn1s legos with the kids. And i intend to use silicone molds so no need for aluminium ones

@D3nn1s

3 жыл бұрын

@@avivharari1362 ah interresting. Im pretty sure that wont work unless maybe with duplex and thats a lot of material. Silicone will flex and legos are actually really really precise

@josepal4568

3 жыл бұрын

@@D3nn1s I see your point Im thinking about making one for making duplicates of my wax models for lost wax casting. but I see your point as to why use one of these when you could use the CNC machines that people are using to make the molds haha

beautiful job! clear, understandable with readily sourced parts! Big Thumbs up for your work.

Thank you very much for the simple and at the same time clever idea.

Wow, I've been trying to learn about injection molding. Not only I learned how injection molding works, I am now the proud owner of my own machine in the garage. Just finished putting it together. Can't wait till tomorrow to run a couple of projects

@snkr_suds

2 жыл бұрын

How did it go?

@KobraVR

2 жыл бұрын

@@snkr_suds he's dead

@snkr_suds

2 жыл бұрын

@@KobraVR 😆

@loafandjug321

2 жыл бұрын

RIP

@canbiance

Жыл бұрын

James Franigan will be missed by many. After his tragic accident with his homemade injection molder killed him in his garage...

Great video, being a CNC machine shop here. I have made parts for a lot of injection molding machines for customers. Might be interesting to make this just to play with it. Thank You for sharing!

@kevinhornbuckle

3 жыл бұрын

Would you be able to machine an aluminum split mold of a particular design out of a block that is about 3" X 2" X 5"?. Fairly simple design.

@Michel-7.7.7

2 жыл бұрын

@@kevinhornbuckle would take obviously more than 6 month to answer, plus around 8 years to make it.

love it as simple and cheap as possible, great!!! and it works perfect

Just watched a video on how most plastics aren't being recycled. This is great; hope to make one and a fuel maker someday soon. Thanks. Liked and subscribed.

This looks great! Ill have to put one together.

This is a PERFECT video, thank you so much.

@BusterBeagle3D

3 жыл бұрын

Thank you Oscar!

Top, Great idea, I've been thinking about this machine for 10 years, I considered using a drill holder, but using 2, it solves all the problems. valew brother you are the best. In my country, this machine is sold for R $ 8,000.00 at around USD 1472.40

Really a nice build and very informative. I really expected you to have to bear down when you shot the plastic )so much so I though the handle you were going to use to support the machine while you injected the plastic looked a little wimpy), but it looked almost effortless, and the quality of the parts you pulled was really nice. Thank you for sharing this project and your time and talent.

Good tutorial - but you should put the max temperature and then REX100 in the learn mode >AT< so it will regulate and hold exactly the temperature

I would live a follow-up video of you making more complex parts so we can see the limits of the machine. Things like thin walls, larger dimension pieces, complex geometry parts. I think that is where this machine will really shine. For example: automotive electrical connector housings with tight tolerances, brackets with 90 degree angles and webbing, glass filed materials, large sweeping thin-walled part like an optical mouse shell. Can't wait to see more videos on this!

@cannaroe1213

3 жыл бұрын

I think a lot of cable connectors are molded around the cable itself, i.e. they don't come off or have any pretense of reuse. Also a lot of them are coming out of patent, and I can see mechanics buying a set of molds for their particular car brand. A pipe joint or some other waterproof tube would also be great, a lot of applications there. At some point it's your ability to make high-tech molds that becomes the limiting factor, not the hot glue gun.

@PeytonDelp

11 ай бұрын

This was my question exactly, and the whole reason I was reading through the comments lol. Looking at the other videos, the most complex design I saw was the coin that had small text, and it looked like it did that fine with high quality.

I suppose that you could build out this idea even further with some sort of automated pellet dispenser if you wanted to speed up processing. It's a great project, thanks for sharing and furthering desktop manufacturing!

Just got SS heating chamber today in the mail and finished mine up wahoo! Awesome job Ryan and great parts too. Thanks for making something a lot of people wanted to do affordable finally!!

@BusterBeagle3D

2 жыл бұрын

Thank you Nathan! Glad you like it!

Amazing innovation. Thank you

this is the best home build I have seen

@BusterBeagle3D

3 жыл бұрын

Thank you very much! I have worked really hard at it for a long time and appreciate the compliment!

Amazing job! Very impressed. I will be building one.

Dude, you are the absolute king of detailed tutorials!!! I don’t even want to build one of these but was totally captivated and entertained! Keep it up! Great video!!!

@BusterBeagle3D

2 жыл бұрын

Hahaha. Thank you! I'm glad you enjoyed it even if you don't want to make one.

This is a very nice build. I may just need to attempt this myself. One thing I would caution you on is the solder type heat shrink connectors are not a great choice for this application. The connections to the heater elements in particular should be mechanical connectors of some sort - preferably heat resistant. Solder is fine for low temperature, low current applications, but it could melt from the higher current and temperature it is exposed to here.

@Graham_Wideman

3 жыл бұрын

And the type of wire connecting to heating elements is often a type that doesn't accept solder. Note that most similar heaters on eBay or Amazon come with screw-clamp connectors or other mechanically fastened connectors.

@theotherebikeguy1473

2 жыл бұрын

Good point. In fact the low melt solder has to be a bismuth tin mix.

@adamkos4179

2 жыл бұрын

What kind of wire is proper?

Excellent video, clean build. Love the concept of using off the shelf components for the build. If I were to build one in would be with the intention of molding disc golf discs. This would require a larger volume of plastic. Not sure off the top of my head how much more.. best guess is triple the volume. Ideas? Thanks for the great content! Keep it up!

@BusterBeagle3D

3 жыл бұрын

Thank you! I'll keep trying to put out content as much as time allows me to ;) Yeah right now this machine is really limited to parts smaller then the golf discs. I guess the concept could work the same way if you design a longer chamber with more heaters and a larger frame. It's definitely something I will look into depending on the interest I get in the machine. Thanks again!

@jttech44

3 жыл бұрын

larger parts will require a larger chamber size, and it will require more injection pressure and mold clamping pressure. Something like this baby machine is fine with just a couple C clamps and a drill press, but you may need to go to something based around a vice and an arbor press to cope with the forces involved. Also, if you're planning to do any sort of volume, you will want to find a place local to you that can build you a mold out of steel. Steel is more dimensionally stable with temperature, and it will allow for the clamping pressures that you need. In addition to that, while you're having a mold built, you should also consider incorporating some cooling channels in your mold halves so that you can quickly cool parts and maintain some sort of stable mold temperature. Once you're done with all that, you'll have most of the features that a commercial machine would have.

You're my hero. I always wanted to make one and you made it easy like butter. Thank you sir

@BusterBeagle3D

3 жыл бұрын

Thank you!

Thank you for showing how easy it is

Nice work! I started a molder like this but burned out when I got to making the chamber/nozzle. Just ordered your parts to finish it up.

@BusterBeagle3D

3 жыл бұрын

I got your order and it will go out first thing in the morning! I do agree that the chamber was the hardest part. I went through many, MANY, iterations of it. I even started by trying to make it solely out of available parts and cobbling it together but that never worked. I went through about 8 manufactured design prototypes before it was dialed in. I would love to see your version once you done with it. Thanks again.

Thanks for sharing this useful video but How can i get larger chamber and plunger for example for maximum shot 100 gram or 150 gram ?

This is really an outstanding video, and I watched the whole thing in one shot. Thank you for being impeccable.

@BusterBeagle3D

3 жыл бұрын

Thank you! I appreciate it.

So happy I found this build. I've already ordered all the parts needed for the stand and electricals. Can't wait to get started 😁

@BusterBeagle3D

2 жыл бұрын

Glad you like it! Thanks for watching!

Absolutely killer work here! Not sure I even need an injection molding machine, but I'm pretty sure this is going on my "to make" list for the near future!

Ok, weird that it took me so long to find this channel, even tho i was actively searching for inspiration for my own Injection molding machine. In the end i build something that was a bit more expensive (about 300) and looked a lot more post apocalyptic, if you want to see the ghetto version of what you build, check out my build series :)

@BusterBeagle3D

3 жыл бұрын

Seems like I released this video around the same time you did so I can see why you didn't see it. Your build seems fine and even if it's Apocalyptic as long as it works it's great!

@shedtime_au

3 жыл бұрын

Nice job!

Very rare to see brilliant engineer and teacher in one person. Easy to understand have not seen more brilliant tutorial.

@BusterBeagle3D

3 жыл бұрын

Thank you very much! I appreciate it.

One would understand everything if he found people who explain like you thanks for sharing! Great content great channel definitely subscribing!

I have no idea what I'd make with this but I still want it

I had no idea I needed one of these. Thanks

@BusterBeagle3D

3 жыл бұрын

Glad I could help you realize that you do :)

You have mastered show and tell, great job. Thank you for sharing the work you did. It is extensive and well thought out. I say outstanding job, and cheers to you. My parts are on order looking forward to the experience.

I also forgot to mention that your video is very WELL done and easy to understand ,even for a neophyte like myself! Thank you.

@BusterBeagle3D

3 жыл бұрын

Thank you!

Aye youtube recommending me something useful for once!

@BusterBeagle3D

3 жыл бұрын

Glad you find it useful!

@dominicandawg3455

3 жыл бұрын

@@BusterBeagle3D I have been trying to find a good diy injection molding build vid and honestly yours hits the head on the nail perfectly!

This is awsome. Ill be adding this to my project list. I sell 3d printed parts and some parts are in need of injection molding

@3dw3dw

9 ай бұрын

Same... it looks like a good way to recycle failed prints, too.

Wow I was looking for a low cost injection molding machine just like this one - but yeah - the cost of them are so much higher than an advanced 3D printer! Great video - I think i will try to make this one!

Got this on my make list! That heat up time was agonizing, so trying to look into ways to speed it up some!

@BusterBeagle3D

3 жыл бұрын

Honestly it heated up way fast other times. I'm not sure why it took so long that time I was filming.

Really interesting! =) I always thought molding plastic is way more complicated.

@BusterBeagle3D

3 жыл бұрын

Thanks! This is plastic injection molding in it simplest form and can be way much more involved but this is a great way for those interested in dipping their toes in it.

@geoffcrumblin7505

2 жыл бұрын

It is.

Holy Smoke Batman! That's unbelievable! I'm building one!

@BusterBeagle3D

3 жыл бұрын

Thanks. Glad you liked it.

Oh my! I regret throwing that cheap drill press contraption. Now I will have to buy 2!

This is incredible. I had no idea that this was accessible at this price point. Chapeau!

@BusterBeagle3D

3 жыл бұрын

Thanks!

This is incredible! I've never done injection molding before, and this makes it very accessible :) Big question though: If you want to mold something that has a greater volume than a single shot, is it possible to do multiple shots to fill the mold without creating significant defects or weaknesses in the molded object?

@BusterBeagle3D

3 жыл бұрын

I don't believe it is possible to inject twice into a mold with any type of machine. You can inject twice if you are over molding a current piece but not if you are just trying to fill the same cavity.

@Michel-7.7.7

2 жыл бұрын

@@BusterBeagle3D maybe heating the aluminium also to around 250°C somehow??

@BusterBeagle3D

2 жыл бұрын

@@Michel-7.7.7 I haven't heard of anything like that. If you need a much larger volume I know there are some other builds on things like the precious plastic website but it may require a little more work to get a machine set up.

@Michel-7.7.7

2 жыл бұрын

@@BusterBeagle3D thx for your quick Response and for sharing your knowledge. Awesome tutorial, x magnitudes better than the guys at the other end of the Bell curve, like one guy without even a screwdriver, who 'converted' an ATX Power supply into a 'bench top Power supply', by using a pocket knife to open the case and cut wires.

cool build

You are a talented engineer. I am impressed with your design and use of off the shelf parts.

@BusterBeagle3D

2 жыл бұрын

Thank you very much!

Great tutorial. I don't have a use case for it yet. But I'll be recommending this video for others to see.

Would be nice to recicle plastics like PET bottles for instance..

@anthonybevers6066

3 жыл бұрын

Have you learned anything more about PET plastic recycling? I have seen where people have made small scale bottle shredders and the plastic is turned into fine shards. The melting point for PET is 270-280 C so i wonder if it is possible to upgrade the controller to melt at higher temps if it doesn't already? If possible, there is a lot of material just laying around outside (unfortunately) that can possibly be repurposed at home.

@Spartacusse

3 жыл бұрын

@@anthonybevers6066 PET loses some of it's properties when re-melted, it probably can't be used for the same purpose, like a soda bottle, but nothing stops it from doing an other function, a more thick part, like an end cap, handle or something. If this guy kzread.info/dash/bejne/fmeI2qWDe8Wzdbw.html can simply cut a thin strip and put it thought a slightly modified 3d printer, I don't see why one couldn't push into a mold, since 3d printing needs a much more precise and consistent feeding and injection is much more brute force and forgiving.

@elementiro

3 жыл бұрын

@@Spartacusse well, honestly all plastics lose properties, maybe just one more so than the others. That should be fine if you consider that in your process/design and if you're fine with it for your item. Industrially, from what I've heard to maintain high quality no more than 5% of input should be recycled material (usually coming from the factory itself, for example from cutted off extruded pathways in multi-item moulds).

@WhenDoesTheVideoActuallyStart

3 жыл бұрын

@@elementiro Depends on the factory, and they can benefit from new additives, more control over the recycling process and the manufacturing, etc....

You should go into production with this.

@BusterBeagle3D

3 жыл бұрын

I may make a few full kits in the future but I keep pretty busy now with all different types of projects. Not to mention the cheapest way to make one would be to DIY. If I made the whole thing it would be quite it bit more expensive.

@Validole

3 жыл бұрын

@@BusterBeagle3D If you do decide to send these to someone not fully comfortable with line voltages, please make sure the ground connection is actually up to spec.

@BusterBeagle3D

3 жыл бұрын

@@Validole Thanks. I know that there is some concern that there might be some coating or paint on the frame the might prevent a good ground connection but I assure you that I have checked the continuity of the connection with a multimeter and the ground functions correctly. If I was to sell fully assembled machines I would go once step further and really make sure that connection in uncoated and secure.

pretty cool, will have to try to make it one of these days

Dude, thank you so much for making this!

Is an hole for the air to escape not needed when injecting plastic into the mould?

@BusterBeagle3D

3 жыл бұрын

If you look closely at the molds there are very slight groves coming off of there where the air can escape the molds. It would still be needed even with these smaller molds.

Where can I find the sheet to make the wire lengths. Love this.

@BusterBeagle3D

3 жыл бұрын

You can find all of the files here. www.thingiverse.com/thing:4658991/files

@rott1976

3 жыл бұрын

@@BusterBeagle3D I ordered parts tonight from your site. I cannot wait.

@BusterBeagle3D

3 жыл бұрын

@@rott1976 Thank you! All of my orders from today are packaged and ready to be dropped off at the post office tomorrow morning. Thanks for your order!

that was pretty cool... well done, thanks for sharing

Awesome, love this project, simplicity, utility an overall elegance in the solution.

@BusterBeagle3D

2 жыл бұрын

Thank you very much!

Liked this video

Subscribed!

@BusterBeagle3D

3 жыл бұрын

Welcome!

I'm doing manual injection from 27 years. Your machine is very nice, easy for position of the mold. My problem is mold making of organic figures like animals, letters, etc. But my diy cnc can do it, I 'm testing.

Awesome, well done and thanks for sharing!

being a coated metal, I seriously doubt that ground is actually grounding. drill a threaded hole into the case, and use a ground bolt.

@danielbecker8373

3 жыл бұрын

Also since plastic is in the stack, the ground can loosen with creep.

@michaelschmidt7014

3 жыл бұрын

Also in any manufactured machine NEMA Code requires a separate ground point. This ground point does not perform any other mechanical function(s) as they can loosen thus loosing ground. A drilled and tapped hole for a screw or a self-tapping screw could be used. Further I would use an eyelet terminal so that in the even the screw loosens the ground wire will not fall off. A second ground wire needs to be run to the lower bracket holding the injection nozzle and heater assembly with the same installation of the ground as the upper assembly. Great video.

Need to scrape the paint off the heater bore and behind the nut. This not a very good ground path as shown

@RV6Tweety

3 жыл бұрын

Came to the comments to say this as well. That ground connection needs a star washer to bite into the powder-coated case, the spade terminal should be a ring terminal so it can't be pulled out accidentally, and it should be properly sized for the bolt it's going on. Also worth pointing out that when you reverse the forked terminals so they don't scrape on the case, you're also defeating the purpose of a forked terminal, which is that it can be inserted without removing the screw. Might as well use ring terminals all around and be completely secure.

This is actually the best actual video of an actual injection molding machine actually built of actual off the shelf actual parts.

@BusterBeagle3D

2 жыл бұрын

I actually see what you actually did there……actually.

Dude... That is BRILLIANT!!! Many years ago I'd purchased the book and parts to make a Gingery injection molding machine. Never did make that machine because I didn't feel like machining all the steel components. Even though I've substituted resin 3D printing for injection molding, I've always wanted to have that in my hobby manufacturing "toolbox", but shied away from doing so with a small commercial bench top machine, due to the extreme cost of one. This is just what I needed!!! Thanks for sharing such an innovative way to produce your own injection molding machine...

@BusterBeagle3D

3 жыл бұрын

You are welcome! Thanks for watching.

@WHJeffB

3 жыл бұрын

@@BusterBeagle3D Looking forward to the Stainless steel parts being back in stock. Also... The Temp sensor you spec'd is out of stock. There are two others that Amazon recommends that look to be similar. One is for 400 degrees, the other for 800. Any preference? Thanks again!

@BusterBeagle3D

3 жыл бұрын

@@WHJeffB Seems like every time I link to a temp sensor wire it goes out of stock ;) You just need a K type sensor with a M6 thread. The 400 degrees would be more than enough and the wires that are 1 meter long are long enough to. They have come with every Rex C-100 PID controller that I have bought. You should easily be able to buy a kit that comes with the PID, SSR, and Temp Sensor wire.

Learning about those solder and seal connectors is enough to make this video worth it. Honestly great video !

@BusterBeagle3D

3 жыл бұрын

They are pretty awesome.

what a nice project !

@BusterBeagle3D

2 жыл бұрын

Thank you!

I was considering a CNC Router, but since my buddy has one...I think you just made my day.

@cannaroe1213

3 жыл бұрын

The two compliment each other - how were you going to make your molds? Out of wood?

@noxix7641

2 жыл бұрын

@@cannaroe1213 I can have him make them, easy enough. Or outsource it after initial prototyping. However the bigger issue is the size, I'd need to build one with a far, far bigger capacity to make anything of use. Which as with all things, will drive the cost up quite a bit.

OMG wonderful, never saw this coming, so simple... On my bucket list... but think I will be dead before I can make it, so many wonderful things...

thank you very much! I have the presses on order and will order the stainless parts once they are available. very good design, much appreciated!

@BusterBeagle3D

3 жыл бұрын

Thank you!

Between your videos, Crafsman, and JohnSL, we're really spoiled for injection molding content right now. I appreciate the amount of attention given to the PID temperature controller setup; I have an Emco 999 benchtop machine that I've been wanting to modify with digital controls and it shouldn't be too difficult to adapt this arrangement to my machine.

@BusterBeagle3D

2 жыл бұрын

Glad I could be of some service. Thanks for watching!

Sir, I in love with your video and your machine. I've seen lots of videos of desktop injection machines, but none as well explained as yours. My pleasure. Thank you thank you thank you!

@BusterBeagle3D

Жыл бұрын

Thank you for watching!

Fikir çok güzel. Kalıbın daha kolay sıkıştırılması ve daha düzenli bir hale getirilmesi ile çok daha profesyonel ve hızlı bir makine elde edilebilir. Elinize, emeğinize sağlık.

I was skeptical at first but then wow, this is amazing. Thanks for sharing

@BusterBeagle3D

2 жыл бұрын

You are welcome. Thanks for watching!

Sweet! Thank you!

This is so awesome!

Holy carp! This is rad as hell, thanks dude!

Very good tutorial, thank you

Remarkable design and resourceful engineering and instructions.

@BusterBeagle3D

3 жыл бұрын

Thank you!

You are just awesome .... well explained .... So kind of you...

Fantastic! This video is very much appreciated!

Well done!

Thank you for making this detailed video!!!

@BusterBeagle3D

2 жыл бұрын

You are so welcome!

Wow I’m so impressed with this! Like good job my dude

@BusterBeagle3D

3 жыл бұрын

Thank you!

You're a genius! Just what I needed. Thank you so much, all the best.

@BusterBeagle3D

6 ай бұрын

Thank you! Glad you liked it!