I put the Open TX program in the video description. The program is made for Magom pump and Servonaut ESC

Auch wenn es keine Anleitung ist, es für dich durch Erfahrung einfach ist, macht es doch Hoffnung daß es als Winterprojekt umsetzbar sein kann. Dankeschön für das Video. Danke an Wühlbox für die Erstellung der Zurüstteile. Gruß Ralph

this is really another example that you really deserve your youtube aword. your work is great. keep it up. you are a great inspiration to many people. 🤩🤩

Really nice work 👍🏻 I've just bought the hydraulic conversation kit for my electric Volvo I already have the blade and slew ring upgrade and a few other bits once it's done it will be nearly identical to the one you've converted in this video

@DanielGonzalez-mj3he

11 ай бұрын

I just purchased the blade today 😊

Awesome… very beautiful 👌 Fully watched 👍👍👍

Szuper! Igazán nagyon szép!

Electric screwdriver 👍👍... 🙄 but great video, the RC world had gone big! Amazing Machines.

Super vidéo merci

Amazing video once again.

thankyou 💞👏💪🥰🥰

nice job !

I am speechless. You have done an amazing work again. keep it up!

Cool!

Como siempre, un trabajo impecable. 👏👏👏👍

Ну вот.. снова какое-то волшебство... Очень круто Стив!

muito top mano

Great

👏👏👏👏

That's amazing 👏, if you don't mind me asking would you sell these?

I liked and subscribed

Great barste.

Kul 😊😁

Thank you for responding if you look on your official manual link. Thats what im doing, at the end i see them connecting the 40 ESC but it doesn't really show what they're connected to. Did the cut off the factory battery plug and put the deans connector on the new ESC? Or did they wire the +and- wires to the factory electronics I hope im explaining this right..

@BartsteRCModels

8 ай бұрын

I don't know how it's made... Is there a BEC from factory ? Maybe tracks and swing motors ESC need power too ? I changed everything on mine, maybe you have to ask APK or wuhlbox of how it have to be done ?

@ALRIGHTdieBand

8 ай бұрын

Hey. I removed the power cable from the original circuit board and now it gets power from the new ESC 30A controller. But the chain drive and uppercarriage rotation can no longer be controlled on the original remote control. Did you find a solution for this?

Mega Umbau ;) eine Frage hätte ich , woher sind die Abdeckungen für die ehemaligen Kabelöffnungen im Baggerarm?

@BartsteRCModels

2 жыл бұрын

C'est dans le kit APK.

@simonw6922

2 жыл бұрын

@@BartsteRCModels das war in meinem Kit leider nicht mit drin 🧐

@BartsteRCModels

2 жыл бұрын

@@simonw6922 Il faut contacter le vendeur du kit ? Moi il me manquait de la visserie, et 2 raccords.

Hi there.. awesome model. I like the addition of the blade. How many millimeters stroke would the actuators for the blade be?

@BartsteRCModels

9 ай бұрын

All parts are listed in video description.

Ok

Is it anyhow possible to make electronics detailed video for this? Hardware is well seen but you kind of skipped the electronic part a little with servo connections and such. I want to copy exactly your setup with radio and sbus connectors and such. That would be perfect to see or is there any pictures somewhere? Thanks!

@BartsteRCModels

Жыл бұрын

Sorry I didn't made it, the video is about APK kit build and Wuhlbox option, usually you can use the standard radio, I made my own setup like my other excavator, but it's not detailled here.

@SonerBaysal

Жыл бұрын

@@BartsteRCModels I see. I liked the video a lot actually. I am also planing to build the same excavator with wuhlbox hydraulic upgrade kit. Thats why i was interested. Thanks for the reply and hard work you put to record the process and sharing. Does those grey 3D parts comes with Wuhlbox hydraulic set? The ones closes the gaps after taking the electric motors way from the boom arm?

@BartsteRCModels

Жыл бұрын

@@SonerBaysal yes the 3d parts comes with the APK Kit

Are you an engineer? What is your experience background as you seem to be knowledgeable in many fields

@BartsteRCModels

2 жыл бұрын

thanks, I am an automation technician

I bought a blade from wuehlbox but I don't know how to connect the wires. Can you explain it briefly?

@BartsteRCModels

5 ай бұрын

I depends the esc you have, I use my own esc, not the esc from wuehl, ask the seller for support.

@maga_bagger

5 ай бұрын

@@BartsteRCModels thank you so much 😀

Do you happen to have a link to the STL for the 3D printed covers you made?

@BartsteRCModels

Жыл бұрын

I get the cover with the APK kit, I didn't printed it

Did you implement the quick coupler without upgrading to a 4v system? If so its electronic quick coupler?

@BartsteRCModels

9 ай бұрын

No it's manual coupler

Can I convert the huina 1550 to hydraulic system 😫

LESU warning light?

Also wo gibt es den Bausatz ?

HI. Where did you get the plastic cover for the stick and boom?

@BartsteRCModels

7 ай бұрын

Ot comes with the kit

@luddvikk1

7 ай бұрын

From APK?

@BartsteRCModels

7 ай бұрын

@@luddvikk1 yes

I really like your excavator. I have a question and a request. Where did they make the chain movement on the remote control. I'm thinking about buying such a remote control too, would it be possible to get your settings from the remote control. thanks

@BartsteRCModels

2 жыл бұрын

I modified my TX16 with back joystick like this : kzread.info/dash/bejne/Zp6GwZWTfLTcdZM.html

Will you give me a link to these connectors to which you attach the cables from the hammer to the excavator?

@BartsteRCModels

Жыл бұрын

It's standard pin servo connector

Did you make the cylinder or did you buy it?

@BartsteRCModels

Жыл бұрын

Cylinders are include in kit, all parts are in video description

@user-pm5kh3ul6u

Жыл бұрын

@@BartsteRCModels Do you know where to buy kits?

Is a diy conversion better than the hydraulic version from double e?

@BartsteRCModels

4 ай бұрын

Yes it's better than the double-E hydraulic version

how much money is needed to make it?

How many minutes can I operate after the battery is fully charged?

@BartsteRCModels

Жыл бұрын

2h aprox

Where does the Feetech Micro ESC go? I can't see that on the video.

@BartsteRCModels

Жыл бұрын

It's for auxiliary control, they are small, you can put everywhere

@markuskania4380

Жыл бұрын

@@BartsteRCModels for the excavator shovel to tilt ?

Hello might be a stupid question but where do I hook up the ESC from the hydraulic pump and motor to? I’m using the factory electronics and transmitter. Does it go to the battery or connect to the channel box somewhere? If it does go to a battery. What do I do with the factory battery wire? Thanks

@BartsteRCModels

8 ай бұрын

Yes the esc must be wired to battery, there is not instruction with your installation ?

@MYRCHOBBY

8 ай бұрын

Hello. The kit came, everything is going well but the hoses. There are not fitting. I tried heat , oil, grease. any advice? Thanks

@BartsteRCModels

8 ай бұрын

@@MYRCHOBBY Yes I had the same problem, hose are too strong, I put some oil before pushing it, but it's very hard.

@MYRCHOBBY

7 ай бұрын

Hello, I purchased the song module you have in the description. How do you program it. I only get a truck sound? Thanks

@BartsteRCModels

7 ай бұрын

@@MYRCHOBBY You can buy a programmation cable and other sound where you buy the sound module

Salve, volevo chiedere se è possibile installare questo kit idraulico apk su un volvo originale idraulico, lasciando solo i pistoni originali.grazie

@BartsteRCModels

5 ай бұрын

Je ne sais pas si les diamètres des tubes correspondent, si elle est déjà hydraulique pourquoi changer ?

Hey, wie kann ich die beiden Ketten Antriebe so machen das sie feinfühlig fahren ? Kann ich da eine esc von WB dazwischen schalten? Hab auch die Electric Version vom Volvo EC160E. Mit freundlichen Grüßen.

@BartsteRCModels

2 жыл бұрын

Tout les lien des pièces sont dans la description de la vidéo. J'utilise des variateurs servonaut MF8

@sheldonxx30

2 жыл бұрын

@@BartsteRCModels many thanks for your fast support.

Wie hast du das Soundsystem angeschlossen?

@BartsteRCModels

5 ай бұрын

Das miko from aliexpress

Hello, I also converted it and operate it with the original white remote control and original circuit board. The hydraulic functions and lights can be controlled, but the upper carriage and chain drive can no longer be rotated. Please advise, thank you.

@BartsteRCModels

8 ай бұрын

Hello, I don't know, I use RadioMaster transmiter. Ask the seller for support with original transmiter

@gregor001

8 ай бұрын

@@BartsteRCModels OK thanks

Hallo wo hast du das Raumschild her

@BartsteRCModels

Жыл бұрын

All parts are listed in video description

this is sick nice work can you do it for my😀😀😀😀i paid for sure

@BartsteRCModels

2 ай бұрын

No sorry, I didn't build for sale

Allo Steve, J’aimerais avoir ton avis par rapport à ce kit. J’ai présentement une Bruder Cat 320 next gen convertie en hydraulique avec le kit magom, le bras en métal et la base en acier. Je l’aime bien, mais la volvo m’attire par sa puissance. Recommanderais-tu l’achat de ce kit vs ma pelle Magom? Merci!

@BartsteRCModels

Жыл бұрын

Salut, pour être franc, j'ai eu pas mal de soucis avec le kit APK, j'ai remplacé la pompe et le distri par du magom, donc perso je garderai la CAT 320, si tu veux plus de force met plus de pression ou prends une pompe Jung.

@Sampick94

Жыл бұрын

Merci de ton retour. Si j’installe une pompe Jung, ce ne sera pas trop de pression pour les vérins Magom? À quelle pression recommandes tu de l’opérer? Merci beaucoup!

@BartsteRCModels

Жыл бұрын

@@Sampick94 Dans tout les cas il faut un limiteur de pression, donc peu importe la pompe, on peu réduire la pression, j'ai 20bars c'est bien assez.

I'm curious about the electronics behind the driver's box, is it necessary to move smoothly?

@BartsteRCModels

2 жыл бұрын

All parts are listed in the video description

How to buy this

@BartsteRCModels

2 жыл бұрын

All link in video description

Tu me la pasarías a hidráulica la mía? O no te dedicas a eso?

@BartsteRCModels

Жыл бұрын

Non désolé je ne propose pas mes services

Berapa harganya excavatornya bang

@BartsteRCModels

2 жыл бұрын

All link in video description

KIT APK Hydraulic conversion tres bien seulement le hic pas de pieces de rechanges le bout des tiges de verins sont en laiton et donc fragile

@BartsteRCModels

2 жыл бұрын

Je dois dire que je suis déçu au final, la pompe à laché au bout de 3min, j'ai des fuites sur le distri et les passages dans le distri sont trop petits. Servo de distri trop bruyant et trop lent aussi. Ca reste pas cher, on en a pour son argent.

@cindydegrange-brayette6815

2 жыл бұрын

@@BartsteRCModels a mon avis il faudra modifier et ameliorer cela avec du magom hrc

@BartsteRCModels

2 жыл бұрын

@@cindydegrange-brayette6815 j'ai deja la pompe de magom et si le distri me prends trop la tete il sera remplacé aussu

@cindydegrange-brayette6815

2 жыл бұрын

@@BartsteRCModels moi j'ai opter pour le distrib et moteur pompe et servo ESC matos de chez magom HRC seule les verins APK que j'ai conserver sur le bras de la pelle

Hey dostum bunu bana satmak ister misin😁😳

UN FORUM ou l'admin est un gros C... on se fait insulter sexisme et homophobe kzread.infoYnTpd9zAr0o

@BartsteRCModels

Жыл бұрын

Je pense que tu parle de JPG lol. Ca fini toujours comme ca avec lui... Ta vidéo est privé je ne peu pas la voir.