Reminds me of when I was a kid, I would make things like this because I didn’t have the money to buy them. Once I had money I bought what I wanted, but some of the magic was gone; so I have come full circle and now enjoy making things again. Two things I wish I had back then: CA glue and those step drill bits. We live in wonderful times.

@parishna4882

5 жыл бұрын

Look at his tv setup... he has the money to buy everything, yet still makes this out of wood and plastic... that's just showing off :(

@dwong98

5 жыл бұрын

Trying to do these projects can be pricey as some people don't have access to a workshop full of tools

@digitalian99

5 жыл бұрын

the things he used is NOT pricey at all, BUT the availability is what makes it hard for others to do this project

@bombeiro-instrutor-Muniz

5 жыл бұрын

Brasil 👍👏🙌🔊🎶🔊🔊🔝

@amanteapasionado6836

5 жыл бұрын

@@dwong98 Some wood, drill, screw driver, screws, wire, wire cutters/crimpers, needle nose pliers, some used speakers, soldering iron, glue, and amp board is all you need to make this. most people already have the tools used, amp boards are what $10 - 50 usd depending on how much watts you want. Someone in the US could make this for less than $50 usd, and if they wanted to make one cheaper that that they could. The most difficult thing would be the knowledge to do it, not everyone understands how to wire this thing up but a few youtube videos on how to do it would be all it takes.

I don't have any knowledge about these..but it seems you did a great job.. neat and clean.. expert level in my opinion. Keep it up

That is a classy little soundbar video, so thanks very much for sharing. I'm going to make it myself. It looks easy enough.

Wow! You are really Talented. Excellent job done. Thanks for sharing.

Man great stuff, you build a lot of things on your channel and its very helpful and informative. Great how to videos by the way keep up the great work.

a little details of the outside trims, it would be nice if it rounded around the speakers and the whole unit from all corners. it is an awesome project , good job

Big props for use of space in your workshop!!!

WOW! I LOVE CREATIVE CHANNEL YOUR EVERY VIDEO IS HIT FOR ME THANKS FOR NICE VIDEO

My first ever build, was a sound bar before sound bars were invented lol. Circa 1991 I Scavenged 6 car speakers from the junkyard, made a large box to fit 4 front facing and two side facing. Powered it with a converted 50 watt car amp I also scavenged..and voila...instant theater. Only thing was, I had to use one TV set for sound and one for Video haha LOL!

@kuntal.chanda

4 жыл бұрын

@PEDRO HENRIQUE LEONEL GUIMARAES 🤩

you are very creative & stunning...Bro... Lots of love &respect from #India..

Good job with basic carpentry equipment & basic soldering.. Great job Thumbs up.

very good quality and instruction. Wish all diy videos on youtube were this good

INFINITELY better than a store bought soundbar. Great work.

Very brilliant person i like your all work

와우..대박..힘..이.아주.아주..좋군요..ㅋㅋ잘 보고 감니다~

Impresionante estupenda y formidable tu capacidad de creacion .Felicitaciones . Dios te bendiga enormemente

Its a great build apart from your speakers are out of phase and what you should have done is left the inside open, that way the passive radiators would work herder and you would get a more defined bass

I want to go to your home . There are so many instruments 😮.

Either way, your work environment is really beautiful.

Excelente el proyecto que realizo. Excelente.... Sos un capo. Vos siempre haciendo cosas raras pero siempre tenes buenas ideas. Segui asi. Te felicito por tu taller que tenes muchas cosas guardadas. Creo que no te falta nada.

Dude! My heart is bleeding! Such a great project and such a lazy paint work, like you don't care! If you'll spend 20 minutes more, you'll come with professional looking electronics!

This video made me enable my adblocker for KZread.

You got a serious Man-Cave there dude... A thousand thumbs up!

Enjoyed the video so much! Very well done!

Awesome job!!! You have a lot of batteries as well!! 🤙🏽🤙🏽🤙🏽

That's a really really nice Project - congratulation. Just on Question. In The Video it looks like the Bass-Speaker are out of Phase. Just how it looks for me. Maybe one try to change + and - for one of them and listen ... More Bass then my guess was right. If not change it back an feel good ;-). Like i said in the beginning: nice Project...

@getyourkicksagain

6 жыл бұрын

Die Kellerwerft I was about to comment on this also. The woofers are out of phase. The one on the right looks to be wired backwards, as it pulls inward with the bass. Also he used polarized electrolytic capacitors for the crossovers where they should have been non-polarized. He could get away with it if he used 2 polarized caps per speaker connected in series but opposing polarities (+--+ or -++-) thus creating a non polarized capacitor.

@bigrenegade7121

5 жыл бұрын

You are right. They are out of phase. At 14:50, looking at the capacitors, he has one of them connected to the wrong terminal creating the out of phase problem

Excellent work and project... Wow, amazing sound bar. 😎

Making is very good and for those who dose not know it is very good to show how others can do the same 👍👍

Needs some primer, lots of sanding, and finished off with a coat of clear for that deep "piano black" look.

@jeeiee_com

4 жыл бұрын

simple paste vinyl sticker

@ermekt7090

3 жыл бұрын

Х

best channel ever

thanks for this great detailed awesome project

Muy elegante, lo que mas me gusto fue el diseño de la caja, falta creo yo un bajo, amplificado Excelente, un abrazo

First time I saw your shop in the whole year or so I've been subscribed. Looks cool!

Your room look very amazing :-D like a toy store for adults. I want it...

This reminds me of my old days

Nice room XD. Amazing done!

Whaaaaaa! Nice work bro! And ever since, this is my first time to see your room 😂

@andrianidewi8036

4 жыл бұрын

Dhz

i want all your equipment😍

This video inspired me to buy a sound bar on Black Friday.

Brilliant idea cheap and best 😍😍😍♥️🇮🇳🇮🇳🇮🇳🚀

@kauanpaixao3950

3 жыл бұрын

Xddssdswgfed

Great vid, next video on making it completely wireless by adding Bluetooth 5.0 module and 18650 batteries giving it 12hr backup.

@1234mattyman

4 жыл бұрын

That's easy just change the amplifier to one with Bluetooth inside and then add 18650 batteries with charger

Fantastic work, dude! 😃

@JFfacts12

6 жыл бұрын

Bro I have a diy channel #JFJHACKS

Amazing talent you have !!! Channel creative is the best !!!

Thanks, Good work simple easy to understand, two thumbs up...

Nice bro

20:30 Nice ;)

Nice soundbar , Nice setup and Nice Home 👍👍👍👌👌👌👌👌👌

Como me gustaría tener un """"COCHINERO" (lugar de trabajo así)) FELICIDADES, BUEN TRABAJO.

Amazing and beautiful speaker bar

@ashokkapse3967

5 жыл бұрын

How much it cost to make can you make one for me tell me the price for it thanks

Amazing bro

@WEMYOUR

6 жыл бұрын

yeah

@allankvist6741

5 жыл бұрын

not really

Your working room is so awesome

Ficou muuito bom este teu projeto.

Seems like one of the speakers have inverted polarity. Right one is firing in and the left side is firing out.

@amanthatthinks

3 жыл бұрын

No sir, it would sound really muffled then..

Please do a studio / room tour video

@JFfacts12

6 жыл бұрын

Bro I have a diy channel #JFJHACKS

6 жыл бұрын

@@JFfacts12 , please don't make ads for your channel.

@JFfacts12

6 жыл бұрын

Ok dear

@hemangparmar9810

6 жыл бұрын

Hey visit his second channel he already made that tour video

@Jithujayaprakash

6 жыл бұрын

@@hemangparmar9810 ok

You are a machine, congratulations.

Молодец! Приятно посмотреть на хорошо проделанную работу! :)

@hrenvan

5 жыл бұрын

Только ума не хватило провода припаять на столе, а не лазить в корпус.

nice

This is what Albert's room like.

Minhas congratulações! My congratlations! Sharing it.

Great working room, I liked it

Your creation is best.👍 I've seen other's,not very impressive.

How did you calculate the parameter of the capacitor to do the “crossover”? You’re the best man!

@dinkuu8724

4 жыл бұрын

of course he didnt

@TheSpotify95

2 жыл бұрын

There was no crossover, he just used a capacitor on the tweeters. For best results you would buy a 2 way crossover unit, and also use separate bass and treble speakers instead of treble and full range.

Great job my friend keep up the good work very Kool 👍👍 thank you so much for sharing your hard work and dedication

That is one hell of a piece of sandpaper 😊

You connected wrong the polarisation of 2 mid range speakers. In video you can see this. When first speaker go out , another one goes in but they should go out when bass nocks the speakers

@mysterOrel7924

6 жыл бұрын

true

@justabasslover4404

6 жыл бұрын

What if you made that one so that no mistakes

@mohammad.j_kamraan

6 жыл бұрын

Dragon Slayer , i made a lot of projects like this. That's a big problem. It can decrease output sound volume to half of real output

@justabasslover4404

6 жыл бұрын

The MJK DJ Thats the point if you made that in his channel,no problem

@exposuredynamic

5 жыл бұрын

Please don't forget and consider that he used a 2 channel amplifier. The reason that the 2 peerles speaker are not both synced of their phase is might be because of the sound signal that is coming from the music of he's phone, and might be was of unbalanced frequency coming from the music or from the phone itself. Anyway he can test it by doing a parallel connection of the 2 peerles on its channel. Just my thoughts. ^_^

Why did you separated tweeters in their own chambers? They don't need it, you wasted a big amount of air volume for the woofers?

@bryanpeeters2552

5 жыл бұрын

they do need it, as you can see they are not closed by themself. if he made it with no dividers the tweeters would viberate too due the pressure of the woofers

@dzonibravo7867

5 жыл бұрын

@@bryanpeeters2552 it could be done with thick plastic cup or something on back of the tweeters.

@bryanpeeters2552

5 жыл бұрын

@@dzonibravo7867 you're right, that's actually a really good idea.

The mad scientist! 😊👍

parabéns amo esse canal ❤

Well... In a speaker we using bipolar capacitors, am I right? :D

@RCshockwave

5 жыл бұрын

Exactly sir.

Please make UPS with 18650 battery

@user-bn4rb3tn3y

6 жыл бұрын

Hi! im just passing korean..

@user-kr9rc5lc4k

6 жыл бұрын

@@user-bn4rb3tn3y 여기서 한국인은 처음 보네요

Nice, thank you!

I like that creative

Make a home theather bro!

I don't want the sound bar i want your room hand it over to me

Bro check plus and minus on the speakers again and put some wool inside. Great project 👍👍👍

You are amazing

please 1 bluetooth speaker parsel me im from assam

@stonedsavage7814

6 жыл бұрын

riyan gogoi this has never worked before for anyone here so what makes you think he will just give you one?

@ranvirdebnath6192

6 жыл бұрын

I'm also from assam

@bilalonl

6 жыл бұрын

Chutya

@abhrajitdey9229

5 жыл бұрын

Oo kela kubio dim makchodu..... Gomm paise? Kela

@patelmarvel7300

5 жыл бұрын

Saale tum jeise logon ki wajah se hi india badnaam hai😒

Iam fist view and like bro

@spaceanime9550

6 жыл бұрын

ممكن نتبادلالاشتراك

@chkampawlow614

6 жыл бұрын

No life what is the pleasure in that

@JFfacts12

6 жыл бұрын

Bro I have a diy channel #JFJHACKS

@spaceanime9550

6 жыл бұрын

we can exchange subscriptions

@JFfacts12

6 жыл бұрын

@@spaceanime9550 ok

Hi I'm making this soundbar, can you please tell me the function of the capacitors AND what capacitors should we use if we install different speakers than those mentioned Thanks in advance

Love ur work.

fantastic work!

Great job like professional....

exelente, me sorprendiste...

Very nice projekt!

Wonderland 😍😍😍😍😍😍 Your's Workshop Bro

Awesome! Well DONE!!!

Very neat and professional work. My suggestion add a headphone jack connect a Bluetooth reciever and go wireless. You need power for Bluetooth reciever which is rechargeable

Beautiful & perfect

Amazing job. Very nice.

just you are super bro.

Superb!!! Bro what a creative mind awesome!!!👌

Finally someone who keeps his pinky nail growing to be a perfect tool for picking your nose. High five!

@niknovsak3288

3 жыл бұрын

wtf

@Jesus-tc4jd

3 жыл бұрын

@@niknovsak3288 stick your nose in othermans business

@niknovsak3288

3 жыл бұрын

@@Jesus-tc4jd no im confused how you have the name jesus lmao

Great project!

Might want to try padding the interior with a thin layer of sponge and making a breeder hole in the center also make holes along the partitions on the inside for the speaker to move more freely, you will notice a significant change in sound Cheers.

You are a genius bro

My congratulations!!! Sharing it.

Great job.

Süper bir video olmuş sizden yola çıkarak bu işi çok seviyorum ses sistemi yapmayı çok teşekkür ederim böyle süper video paylaşım yaptığınız için 💯💯👍👍

i like your workshop bro..nice vids...

The largest sand paper and bigest glue box I've ever seen are in this video 😄👍👍