Build a Kit Car with ONLY a Drill, Pop Rivets, and Rattle Can Paint - Engine Power S2, E10
Автокөліктер мен көлік құралдары
Pat and Mike team up with Dupli-Color to build an old skool street rod with Factory Five Racing's '33 hot rod kit.
PARTS USED IN THIS EPISODE:
Design Engineering, Inc. (DEI): Heat Protection, Acoustic Insulation, Boom Mat, 12 1/2 in. x 24 in., Self-Adhesive, Set of 20
More Info: pntv.us/pn_pt_1831
Dupli-Color: Paint, Metallic Coating, Enamel, Textured, Silver Metallic, 11 oz., Aerosol, Each
More Info: pntv.us/pn_pt_1821
Dupli-Color: Paint, Spatter, Enamel, Textured, Black/Gray, 11 oz., Aerosol, Each
More Info: pntv.us/pn_pt_1819
Dupli-Color: Paint, Wheel, Acrylic Enamel, Satin, Black, 12 oz., Aerosol, Each
More Info: pntv.us/pn_pt_1827
Dupli-Color: Paint, Lacquer, Matte Clear Coat, 1qt., Each
More Info: pntv.us/pn_pt_1834
Dupli-Color: Paint, Paint Shop Finish, Lacquer, Gloss, Jet Black, 1 qt., Each
More Info: pntv.us/pn_pt_1833
Dupli-Color: VHT, Paint, Roll Bar, Epoxy, Satin, Black, 11 oz., Aerosol Spray Can, Each
More Info: pntv.us/pn_pt_1825
Dupli-Color: Primer, Paint Shop Finish, Lacquer, Flat, Gray, 1 qt., Each
More Info: pntv.us/pn_pt_1832
Dupli-Color: VHT, Paint, Flameproof Coating, High-Temperature, Satin, Clear, 11 oz., Aerosol Spray Can, Each
More Info: pntv.us/pn_pt_1824
Dupli-Color
Wax and Tar Remover, 11 oz., Each
pntv.us/pn_pt_1823
Stop Tech
Brake Pads, Street Perfomance, Aramid-Fiber Metallic, Set
pntv.us/pn_pt_1829
Stop Tech
Brake Pads, Street Perfomance, Aramid-Fiber Metallic, Set
pntv.us/pn_pt_1830
Dupli-Color
Paint, Brake Caliper Paint, Blue, 11 oz., Aerosol Cleaner, 8.5 oz. Brush-On Paint, Kit
Factory Five Racing,Inc.
The Factory Five "33 Hot Rod comes with all of the parts you need to build your car except for the engine, transmission, rear-end and paint. Complete kit, with optional 18" and 20" Salt Flat Wheels - Gray, with 245/40/R18 and 295/30/20 TOYO Tires
Loctite
598 Black, High Performance RTV Silicone Gasket Maker, 300 ml Cartridge
The Industrial Depot
Industrial Depot - Fasteners, Hardware, And Shop Supplies
WD-40
Aerosol, 12 oz., lubricant, water dispersant, penetrant, protectant
Пікірлер: 550
We'll continue to post these episodes here on KZread. If you can't wait for the rest of the build, visit our site to binge-watch: www.powernationtv.com/shows/engine-power
@ministerc9513
4 жыл бұрын
Please don't
@JustRelaxCo
4 жыл бұрын
How do we enter to win this thing?
@bustersmith5569
4 жыл бұрын
How do you title a kit like that ? TY,
@robertless5056
7 ай бұрын
You guys are high
I remember when I used to watch tv shows with these guys and others, the whole show was a commercial except when they had a break for a commercial.
I think with an in depth how to step by step video would encourage more novice builders.
I assembled one for a friend. I was very impressed with the quality of the kit. We added air conditioning, power windows, hard top, windshield wipers, remote start with alarm, remote entry ( no handles ), touch screen radio, cd, blue tooth, navigation with a back up camera, hidden LED backup lights, Rockford Fosgate amp, subs and high end speakers. Turned out so nice that l forget sometimes that l assembled it. Maybe someday I can assemble one for myself. Owner went with a 351 dressed up inside and out, TCI trans and 8.8 rear end. It will move.
@honorabledice
Жыл бұрын
Hello Arthur, would you assemble one for me as well. I'm willing to pay up
@grahamstrouse1165
10 ай бұрын
Don’t know how likely it is that you’ll see this, Arthur, but if you do, may I ask how long it took you to put this ride together? It sounds like a really neat ride, btw. I hope you get a chance to build one for yourself!
A drill and a rivet gun and a lot of knowledge about car building as well as a full set of every tool.
It's hard to convince someone to use a rattle can on a car they spend $30k on.
@1RAYGC
3 жыл бұрын
I decent paint gun is not expensive, I think it has to do with Duplicolor being a sponsor.
@georgvonsauer2618
3 жыл бұрын
I use a rattle can on my model t all the time...with a little bit of work, you can not tell where I used it...I do not sweat rock chips or scratches...
@boomerisadog3899
3 жыл бұрын
@@georgvonsauer2618 Teach me your ways, Great master. For I have a 67 Chevelle SS with 10 year old black paint.
@dancahill9122
3 жыл бұрын
Who said anything about money ? ? ? They said build a car with a drill, pop rivet gun and rattle can paint. The title didn't say anything about needing Money ! ! I'M PISSED ! ! !
@bmxriderforlife1234
2 жыл бұрын
@@boomerisadog3899 dude it's not hard. But also depends how much work you wanna do. Learn about burying shit in clear coat like racing stripes and polishing and wet sanding.
Drill, rivet's, rattle can and about 30 THOUSAND DOLLARS😵
how did you sand the excess fibre glass , and flash mould lines , was it with a pop rivet , or the drill ??
Dupli-Color customer for life. Painted my rally car interior with the stuff
here in europe we can just dream about something like this... a kit car built in your driveway with a couple of buddies and a bunch of beers... enjoy your freedom fellas
@crsmith56
3 жыл бұрын
Will do. Thanks 🍺
What a clean lookin build. Great job
Wow... It is badass ! I would love to have it in my driveway !
American hot rodder culture is great.🥝🇳🇿😊
simple build..looks great
I love the kit and I love the price, but I would have a roll bar put on it before I go out with it.
@lilbo1Y1
2 жыл бұрын
Kit comes with a roll bar but people leave it off. It bolts in or could be welded to the frame.
12:42 That wrench doesn't look like my drill or rivet gun or paint can. Which is it PowerNation?
Loved these as soon as they came out
ohh wow! Simple great build
I love this and I want to get one I'm sure I could build it no problem!
Once i have ny new job this is my goal is to build one of these and make videos cruising my home state
Looks pretty good actually
Very cool 😎🇺🇸 I wish we would of have had this when I was a kid.
CARROS MARAVILHOSOS ,SENSACIONAL!!!
Heavens waiting, Jesus would be proud !!!!!
I will totally take the car. Good looking job.
on such a wheelbarrow to dissect just a pleasure like bro
18:41 Question - Aluminium to steel riveting, they are dissimilar metals and are subject to considerable galvanic corrosion being wet from rain, road grime (salted roads) and even humid hot days. Wouldn't the better choice have been zincanneal sheet and spot weld them to the frame THEN paint the frame?
This is a cool ad ngl
This looks like something I need to start saving money for, it'll give me something to shoot for as well as be able to say I built my own car, you wouldn't even need a big motor for a car that size and weight
thats sweet ride
Plus I'll take anything those two build! 😁😁😁😁
Honestly. One day I'm going to build a kit car.
@TheNomadicWrencher
4 жыл бұрын
these kits are 20k no motor and trans and other parts missing.
@suckmysilencer747
4 жыл бұрын
@@TheNomadicWrencher Thanks for the fun fact. But I'd still like to build a kit car one day, doesn't mean this exact one.
@TheNomadicWrencher
4 жыл бұрын
@@suckmysilencer747 id like to some day also.
@trentdawg2832
4 жыл бұрын
Porsche 356 on a bug pan, with a turbo subaru boxer engine would be raw
good video so easy to build that car
That would be one bad ass ride to win.
This is way cool very light
4 years latter- A real benefit of these kits is the possibility of a very cheap and practical A to B vehicles by going the low hp route, AKA some of the light vehicles out of the UK using motor cycle engines. Being built for larger engines may give them a large safety buffer over the lighter vehicles when smaller engines are fitted.
Yeah that's awesome we love to have something like that lian-li pastime getting too old that is an awesome job we love your work love to watch you work
Thank you.
Best TV ever........ :) LoveNation
CAR BEAUTIFUL
Good stuff!
I love and completely agree with your list. The last quality of a Sense of Humor is my most important one as well, but unfortunately in my almost 46 years I have yet to meet someone that could match my sense of humor. I do look forward to that.
I laughed out loud at the driver switch. Haha.
How long does it take to build
Now someone make a 3-row dad wagon kit.
I thought I was going to see a cool build video. Turns out this is just an 18 minute long commercial. DO BETTER.
@jgkavanaugh
4 жыл бұрын
That is every episode of the show. It is all product placement and advertising.
@1RAYGC
3 жыл бұрын
same is true with their tv shows
@boomerisadog3899
3 жыл бұрын
@@1RAYGC DuPliColoR!
This makes me so happy MERICA🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸🇺🇸
Love it!
"Visibility is good" until the top goes on and you realize it's chopped, lol.
LoL it's badassss, would look incredible in that malibu candy metallic blue with tan leather
I once saw a guy change an automatic transmission with only one tool and it wasn't a drill, pop riveter, or a rattle can, it was a pair of Visegrips.
Yep... I want one!
Muchas Felicidades Joven Por Su Canal
COISA LINDA DE SE VER ,LINDO,LINDO,LINDO!!!
Truly amazing! Are your kits available in Canada?
I dream of one of those 33s,with a hot slant six and some tall narrow steel wheels,
@goober3463
4 жыл бұрын
I'd find a 85 mustang donor with a carbureted roller top 302 and a 5 speed manual, light weight 225 hp stock and 300-6 with overdrive gas mileage until you stomp on it.
@ronaldharris6569
4 жыл бұрын
@@goober3463 those are rare now,but there are a lot of crown,vics out there
@trentdawg2832
4 жыл бұрын
Dream bigger and lose the 6
@ronaldharris6569
4 жыл бұрын
@@trentdawg2832 making oddball stuff fast is the point
@basshead.
4 жыл бұрын
+Ronald Harris The Slant 6 isn't an oddball. It's a pretty generic old inline 6 engine.
I like the rims.
300 HP go cart, fun to dream about, looks coo, fun to drive around the block but will wear you out after 50 miles.
@JohnSmith-ps7wp
7 күн бұрын
Not true if you go with the hard top.
Hi Bro nice project.Very very nice:Colour,power engineers.❤
I finally figured it out Pat is the James may of America
That's it i'm buying one!
Nice Duplicolor commercial boys.
426 hellephant crate engine👍🏾
Cool! Kind of a ZZ Top car!
Молодцы. очень интересное занятие. классные машинки
I would drive it like Pat nice and slow.
Wow. All i need is a rivet thingy and a crecent wrench and visegrips..
I soooo need one of these
Wish i had !
Man I want one
This is sweet
Love it :D
Cool!
A lot of people complaining about using 3 extra wrenches to build it. Finish work is up to you if you want to rattle can or put it in a booth..hell make it a rat rod.Its complete enough for me to do in my garage. Supercharged LS engine would be nice, reliable and fast as hell!
I'm ready to win this car, its nice
Does the assembly team come with the kit?
Oh how i wish i could have one of these. But no point in building something i can fit in. @ 6'8" tall id never fit. But oh how pretty.
I would love just to cruise
i need one of these like i need a hole in my head, but i want one outstanding!!!
Man I am just drooling to see a hopped up straight six and a manual in that. (Intake stacks on one side, pipes on the other side). A Jeep 4liter or old Dodge Slant... wait. Both of those have exhaust and intake same side. Well... still way cooler than a generic small block v8.
In case I was the last to know, open wheels are NOT legal in America. You MUST have fenders of a sort that prevents rocks and other debris from being thrown by the tire tread. FMCSR part 387. Thanks, JD
@ghostup101
Жыл бұрын
@Abe Adams you’re wrong. The Plymouth Prowler does have fenders in the rear and front of the vehicle. They may be small but they are there. Any vehicle without fenders is considered illegal to be driven on public roads. Although you may own one without fenders and have it in your personal collection.
I want one....😎
That build book was thicker then the Bible lol
Mass air sensor is mounted upside down, must be a cheaper one and had to clock it to get decent idle and running characteristics
Visiblity is good lol
You guys always find a way to disappoint me 🤦🏽♂️🧐😳🥺
Just a note for the diy crowd, even if it says no primer needed, use primer.
How many days did that take
Awesome informational educational video experience Y'alls God Bless Ya 🙏
My wife would look hot driving this... Would probably get a a 3L 400hp diesel powerplant in the future ☺️
I'm glad Mark Eichelberger was in this video. Great last name.
Do these come in a Hard top?....
Easy to fix...So what's the full price of the kit??
How do you shake a can of paint?
Any chance for the right drive? please
Do they come in right hand drive for. Australia
btw i would give anything to get a car like this. I love working on things, and this would take it to another level! :)
@trillrifaxegrindor4411
4 жыл бұрын
if you have 40-$50,000 you are all set!!
Can I still be able to buy this ‘32 Roadster ? and what exactly are the items ? .. fuel tank , power steering, engine , headers , radiator , tranny - and Rear end included!!!!?….
Man those are some big ole booger welds on that frame
Шикарный Хот-Род, почему сейчас, когда есть электро мотоциклы , на мотор колесах, ни кто не делает Хот-Род на электрических мотор-колесах???❤😢😅