In and out of the camper all weekend after this install. GREAT PERFORMANCE!

Great video, but many of us are not on a budget and really like the traditional fold down stairs as we dislike the solid steps for multiple reasons, but mostly because they limit where you can put them down. This is a great gadget that may in time remove the need for a solid step.

Installed them on my Imagine XLS 21BHE. I LOVE IT. It gives about 90% do the stability of Solid Steps at 10% the price.

Love that design with the exception of the protruding bolt heads on the face of the step. Wish they had used a plow bolt fastener setup.

Thanks for the video. I have a Trandscend and now know this setup will work. No more stacking blocks for me!

I could have used this information a week ago before I replaced my fold down steps with solid steps. Great idea and your right way cheaper. 👍

@WanderingWeekends

2 жыл бұрын

Sorry!! I just installed them last week!

Great content. Thanks for sharing. Always love seeing new products, especially useful products.

I purchased one of these solid stance stabalizers spring 2021 and it is way nice and simple.

Thanks Cory. Very helpful and informative. I've wanted solid steps for sometime now but we store our 5th wheel in a tight spot. This will be great... and i agree with you, it's pretty rver- friendly for Lippert to put this product out. Although i see this as becoming the standard for years to come. Thx again. bg

Order mine when they first came out. They work great.

I just purchased one of these for our 251BH. Instructions didn't show a step with the slope underneath that our steps have so started questioning if I had purchased the right one. When I searched for videos on installation and saw your logo, knew it was the video I needed to watch. Thanks!

@WanderingWeekends

7 ай бұрын

I really think these do a great job! Appreciate you watching.

Great option like others, I wish I had this rather than the Solid Step addition we made. Thanks for the info

Hi Cory I’ve been looking at that solid stance for a while I missed the Amazon sale I’ll probably pick one up in the spring it seems like a nice product

This looks like a better design than the Campco version. We’ve been at a few campsites and even our RV pad at the house due to the slope from left to right, there is no clearance under the bottom step. We use a Valterra RV stabilizer with the ratchet strap under the step box. Seems to work well for us.

👍nice cory need it see if those work with my aluminum steps way to go lippert

Seems like that install is backwards. Wouldn't you want to have those black handles facing the front so you can more easily reach them? Bummer that you are forced to drill through your steps. I would like to see some sort of system that allows you to bolt through the side of the steps. Heck, going forward it would be really nice to just see that system on all of their steps welded to them so there is not bolt on for when you buy new.

@WanderingWeekends

2 жыл бұрын

Worked great this weekend…

@007KrausBean

2 жыл бұрын

@@WanderingWeekends I don't doubt that it works. To me it just seems to make sense to have the black knobs facing out where you can grab them without having to reach around to them. Anyway...cool video. Will be nice to see how this product evolves.

@glenludwig9676

7 ай бұрын

Drill your steps. Life will continue

Considering the 22MLE I would probably add this to if we do buy it.

I would counter sink those holes and use flat heads so they would be flush on the top. Looks like those bolt heads could be rough on bare feet.

Like butter

Why do the recommend facing the spring pins toward the trailer? To me, would make sense to face them outward, easier to access and adjust.

@WanderingWeekends

Жыл бұрын

When you’re folding up to leave easier access.

That’s a great product. Kinda wish I had that instead of the solid step. The solid steps are nice until you realize every time you want to go into the trailer when not in use, even for a second you have to fold them down and fold them back up. That can be tricky for some people who don’t have a lot of room where they store their camper. They also tend to get more dirt into the camper.

@joshhaas2410

2 жыл бұрын

This is exactly why I have been hesitant to go with solid steps. As much as I would love that stability up and down the steps I think your experience just helped me decide they aren’t for us. Thanks.

@mattc3169

2 жыл бұрын

@@joshhaas2410 glad I could help. I do like the solid steps at a campground and they are built really well, but like I said you do need room to fold them down and they are a bit on the heavy side.

@christophercattie

Жыл бұрын

I had to pull over once close to the side of the road to get inside and remember thinking "if I had the solid steps, I wouldn't be able to get in I'm so close to the guardrail. Thats why I like this.

I like that option better than the solid steps. I like being able to fold up the steps without blocking the doorway to aid in loading/unloading. But I don't quite understand the need for the steps to be grounded. I get that they like the solid feel but I've never felt like my floating steps were going to fail without some kind of ground support. Nice install video, though!

@JohnScheppler

2 жыл бұрын

Warren the fold down steps are nice but as a person with impaired mobility the wiggle in the fold down steps are modified when you don't have good balance. This would also apply to people as they get older in years too. Having the steps solid to the ground helps greatly in reducing any accidents because of the movements.

@wmcnett

2 жыл бұрын

@@JohnScheppler I can totally understand that. I'm not too sure that the handrail leading into the trailer would remain intact if someone lost their balance. My balance certainly isn't what it once was either.

@JohnScheppler

2 жыл бұрын

@@wmcnett hopefully we never need to find out, but yes probably not.

Nice mod. Very timely as I was just on Amazon ready to order the two metal plate type with a screw jack type . This looks a lot more stable. Beats my current stack of 2 x 6's. Milwaukee drill bits in a DeWalt drill, blasphemy ! surprised the drill bit didn't snap in protest.. (lol)

@WanderingWeekends

2 жыл бұрын

Haha!

@joshhaas2410

2 жыл бұрын

Glad you went this route. I don’t like our screw type camcos at all.

Could you pull that strip out of the step, install the unit and then put the strip back down, I wonder? We just bought a Transcend and this stabilizer would be an awesome mod.

👍👍

An upgrade even a Tech fan could do!

@WanderingWeekends

2 жыл бұрын

😂🤣

Can't find your amazon step stabilizer link

👍👍👍

Cory do you think there would be any issues with the step rug covers going around the step (connected by spring hooks).

@WanderingWeekends

2 жыл бұрын

That is a great question. I would bet there is a way to make it work but until I actually had everything in front of me I couldn’t give you a solid answer 😕

@nh4640

2 жыл бұрын

Great question. Pending to see if possible! Thanks for providing all the RV video/info!

Thank you for this. I might try it. I can’t stand our camco step mounts. Such a great idea but I can never get it to work right. With the Camcos, when I step on my second step, the lack of support there lifts the first step slightly and moves the camcos out of position. This is my biggest complaint. Do you notice this problem at all with the lippert design?

@WanderingWeekends

2 жыл бұрын

Nope! I thought that may be an issue as well. Didn't seem to have that issue at all while in use.

@joshhaas2410

2 жыл бұрын

@@WanderingWeekends Killer, thanks for your reply. I have different steps than your transcend so when I install this on my Apex Nano I'll comment on this again with the result. I think ours are probably more the standard lower end double folding steps most have.

Those look like Milwaukee bits not Kobalt!

@WanderingWeekends

Жыл бұрын

Cobalt is the material the bits are made of... not Kobalt the brand name

@carlitos305way

Жыл бұрын

@@WanderingWeekends lol got ya thanks for clarifying

First step is solid. What about the other two? The bottom one doesn’t lock in. So that product is useless

@WanderingWeekends

7 ай бұрын

Have you used one?

@glenludwig9676

6 ай бұрын

@@WanderingWeekends Yes and yes you get some support but pretty much on the bottom step only. To me it’s a waste of money. Not even close to the support of a solid step. Yes more money but it a better product because it’s built for that reason and not a aftermarket product to pull the Pennys from your pocket. No offence to your review if it works for you.

My aluminum steps thank God had rubber removable strips on the upper surface of each step that hides rivets that secures the aluminum step to the surrounding metal framework. Because of this design feature I was able to HIDE the bolt heads under the rubber strip to prevent an awful look as the one you installed. I'm surprised you didn't speak at all about the unsightly bolt heads showing on the step surface. Fortunately for me I was able to avoid that.

@WanderingWeekends

Ай бұрын

I just look at things a little different. I’m a function over form guy. These things aren’t Ferraris. They’re glorified tents really. If someone is worried about the bolt heads on my RV steps we probably won’t be friends long. 🤣 I’m all about pride of ownership and I do like for my stuff to look nice but this is silly in my opinion. To each their own.

Like your video - hate the intermission ‘music’’

@WanderingWeekends

2 жыл бұрын

Hey… can’t make em all happy 🤷🏻‍♂️

That looks horrible with them bolts on top.... Better get some rug steps... 😊

@WanderingWeekends

Жыл бұрын

🤣 you make it sound like the steps were a beautiful work of art in the first place. They’re folding RV steps… a few low profile bolts ain’t hurting the look. No need for rug steps. The bolt heads aren’t even noticeable u see your feet.