Budget E46 DIY Muffler Delete
Автокөліктер мен көлік құралдары
The wagon was in desperate need of being louder so I could hear better while I'm drifting! This current setup drones pretty bad and if I can't get used to it I'll probably change the piping from 2.5" to 2" in hopes to reduce the drone
Follow me on Instagram: @e30joel - / e30joel
Пікірлер: 137
You building a family now breh. You got a lot of people looking up to you, myself included. Keep it mayn! You'll be one of the greats in the car scene
@sawyerT92
2 жыл бұрын
yessir 🤙🏽 @vip.92
You can really just do about anything with your car yourself. Wow 👏
@idkdrew
2 жыл бұрын
i know a lot of people wish they could say that lol! DIY is the way to go
If your looking for cheap but decent welder I have an everlast inverter stick welder that’s been solid for me. It’s paid for itself with the repairs and projects I’ve done. I haven’t tried their mig machines.
You've got mad metalworking skills bro and shout-out to your pops. The wagon sounds amazing, good clips 👌🏾
Glad your surgery went well! Slow and steady wins the recovery race, you'll be back up before ya know it. We love you Joel!
watching all the hard work and passion that you put into your builds just never gets old
Joell! Thanks g. Stop drinking really want to start building my fg4 si. Been working out too. You a inspiration g.
@wamp629
2 жыл бұрын
Good shit stay up bro
bro I forget where I even found you but you've become like my top 5 favorite channels to watch I don't even own an e30 and I feel like I could work one inside out from watching you. Thanks for putting out such great content and I hope for a speedy recovery,
I gotta say this, thank you for your videos, really helps me get my mind off of things. Much love joel!
Joel, I laughed so hard when you lost your bumper... I truly hope you feel much better bro, I'm glad I found your channel, I bought a e46 325i Individual and I absolutely adore that car, its one of the reasons why I watch you,and its mostly cause of the vibes.
Appreciate the upload, hope recovery is going well bro!
I just got the Eastwood mp140i. Works great for exhaust tubing, brackets, etc. First gas shielded welder I’ve bought, and for only $500, I love it!
love the wagon content, excited to see the rear being rebuilt
I would recommend you get the BimmerBrakes V3 catless headers when you decide to throw some headers on it. I have those headers plus a muffler delete like this and it sounds godly. Awesome build Joel, excited to see this build progress!
we love you bro hoping the recovery is quick can’t wait for the next vid
Pops is a G, another good video 👌🏼 Rest up, take your time to recover properly, we’ll be here when you get back
Great work on the exhaust. Sounds amazing bro. Keep up the grind. Love watching you vids. Gets me hyped to start working on my first car.
I absolutely LOVE the sound, I have a 1.6 Mini from 03 (BMW Mini) and it sounds the same at 2k rpms! Get well soon bro!
you're making me really wanna make my wagon louder it sounds nice as hell
i really like this series keep the videos coming i literally watched the whole series all the way through.
Well needed video, hoping for the best recovery 🔵
your vids gotta be my fav vids to watch while eating
Yo Joel when you're cutting the exhaust piping at 4:50 I've found that what helps me the most with the sawzall is to keep the piping as close to the machine as possible, you don't want to be cutting the pipe with the tip of the blade. This let's you use the butt of the machine to absorb some of the shaking and give you a more stable cut
Glad you found ur bumper and did The delete sounds good when ya hit the gears
love the e46 content
Love the wagon content bro. I daily the same car but its a 330d, soo good.
Yoo its sandy bro showin love💪🏼
i aspire to be like you man, i wanna be able to build and learn like how you do building it i hope to do that one day. i love the vids man love your channel. take care always have a speedy recovery god speed
Bro I can’t wait to see the future content w the e46 wagon
Nice, love the wagon content
It’s my man that full sent it in front of the police !❤
Keep up the good work! I love watching your vids
Just in time for lunch let’s gooooo 💪🏻
Joel makes me want to get a bmw 👍 great video man
are you still driving it without the stock airbox?? that might screw up your MAF sensor prematurely.. just be careful. cars sounds better tho
When I was doing my CSB in the shop, I fired it up with absolutely no muffler, just the headers that thing sounded scary😆
I love how has doing it DIY shits fun to watch
The reaction about bumper was priceless 🤣🤣
How much did it run you to do the swap from auto to manual.... its something I'm thinking about doing
"Sounded like I lost some shit" "OH NO MY BUMPER!" Lmao, that really had ma dying 😂
fire vid bro, also just did a muffler delete, on a e36
You and your bro be the funniest for real😂😂😂
Have you had the issue with your gauge cluster not working? If so how did you fix it?
bro , what tires are you rinning and how wide are the rims spec?
diff bushings for the win replace all three
u can do high flow cats instead of catless and then do performance resonators like used or something
Brother, I've got a 328i E46; the steering however doesn't center the way yours does. Any idea what might be wrong?
man i love your content.
Where did you buy adapter and pipe?
I did the Same bro but the fuel consumption is too high. Is there anything I could do about that bro?
I would delete the stock resonators and weld in some drone delete resonators. Did that on an E39 525i and it sounds good with little drone.
Bruh I started laughing so hard when his reaction to his bumper flying offff like why the whole bumper !
is this after the surgery ? are good now?, hope you are
LOL I started dying when I saw that your bumper fell 😂😂
!!!love the videos man keep it up
Can I do this to a 325xi?
nice e46 brooooo.
beautiful note, you should think German and cut the pipe so it lines up with your camera angle and the end of the inner bumper, it will sound 110%
Y ahora pa sacarlo 🤣🤣🤣🤣🤣😭😭😭 brooo, love the vids!!! 🤣 saludos pa tu papa!
I have the same rear clunk in my 330ci and it’s so damn annoying. Got the diff mounts/bushings but just have been putting it off lmao
Are those e39 wheels?
Catless headers with muffler delete best sound on these cars
Sounds perfect!
My man really said dont wanna go into reverse and spin the engine backwards. 😂😂😂
Does anyone know what wheels those are?
What part of ct you from
U gonna do catless headless or a res delete
I had the muffler removed on my 323i. The sound in the station wagon is terrible. The next day I put the original exhaust: D These are 18 inch wheels ???
what engine?
😂😂😂 you fount me when the bumper got lost
Whic country you stay
fire vid
LMFAOOO when homie found his bumper was gone
Dope stuff g
Are you gonna do an engine swap in the future?
MANS LOST HIS DAMN BUMPER I CANT HAHAHHAHA
omg brop yESSSSS haha whatever I love your attitude, I'd do the same hahaha the next morning bumper search. I love it haha Bless
engine?
Watching at 20:00 hoping you're going to make hangers
Good job Love your videos
@ImJoel Bro I love that you can speak another language other than English, I love the BMW content too but not as much as I like that other language... I hope you don't mind me mentioning that Lol
why you keep saying e36 ?
Buy a titanium 200 from harbor freight I weld every single day with it. Exhaust, diffs. Everything
Push weld puddles, dont pull thats usually reserved for stick welding exclusively
your rear tires are on backwards (rotating the wrong way)
Is that galvanized steel? That’s terrible!!
Next time, just grind off any coating on aluminized steel, or any coated steel. It cleans the steel as well, and promotes a better weld.
Guess I know what I’m doing to my e46 wagon next lol
imjoel stonks going to the moon soon
Ain no waaaaay, THE BUMPER!!!!!!! 😭🤣
10:14 I shat myself haha, really enjoy watching this vid
You gotta tighten the top center bolt on the maxpeedingrods coilovers, they come loose as fuck!
17:25 bolt for coil is loose asf i think
One tip is don’t use harbor freight blades.
there is clearly a problem with rear bumper,cuz it cannot fall off
Just add a resonator if it’s drones that much.
omg bro i been thinking to do the same thing to my 328 e90
@xisupremez8402
2 жыл бұрын
But idk if i shuld
You need to delete the middle resonator
Now weld subframe supports lol
Fuck man I don't know if i'm ready to attempt this with my harbor freight flux core welder hahaha, I was able to do some bypass work in a stock e34 525i muffler with it though