Bucket handling - Volvo Wheel Loaders H-series - Basic operator training - 5/11
Автокөліктер мен көлік құралдары
With the right operating technique and correct bucket you can keep the costs of fuel and tires down while maintaining high production. This video describes the most important things to consider for more effective and safer work with your Volvo Wheel Loader.
Visit the playlist "Volvo Wheel Loaders H-series - Basic operator training" for more instructions. If you have any questions related to the content of this video, please contact us: www.volvoce.com/global/en/our...
Please note: This movie is not a substitute for the Operator's manual. IT IS COMPULSORY TO CONSULT THE OPERATOR'S MANUAL FOR COMPLETE DETAILS.
Want to know more about our wheel loaders? Visit our global site: www.volvoce.com/global/en/our...
Пікірлер: 21
Ill be operating this machine next week, really looking forward to it.
@jessedean1983
6 ай бұрын
How was it?
Vous avez une bonne formation
Am in kenya I can want to work Volvo machines
If you use 1st gear with a soft footing you'll dig holes 1st gear produces too much wheel torque and the hydraulics are too fast. Use 2nd gear when loading the bucket. Wheel torque is easier to control and hydraulic speed is better matched.
@arne524
4 жыл бұрын
This is also automatic is it?
@nealk6387
4 жыл бұрын
@@arne524 it can be if selected by the operator.
@bjorndahlberg9182
3 жыл бұрын
Maybe you just need to learn how to drive, i always use 1st gear when i load the bucket, i never dig holes.
@nealk6387
3 жыл бұрын
@@bjorndahlberg9182 ok, fuckin super operator!
@RAPTORB26
Жыл бұрын
As they said in the video ADAPT engine rpm to prevent wheels from slipping. In other words don't keep the throttle mashed on the floor. I been working in very soft sand for 14 years and never had an issue using 1st gear. Running higher gears when digging runs higher risk of causing transmission and converter damage or premature wear.