Everything you need to know for the 2020 Sea-Doo CM-TEC hull
Жүктеу.....
Пікірлер: 15
@Sea-Doopilot2 жыл бұрын
Sea-Doo try to repair the "crazing" or cracking in my 18 RXTX. After attempting to fix it they eventually bought the ski back and gave me a 19. It took me getting a hold of the president of Marine sales at BRP to get it to happen. I've had no issues with the 2019 model. As anything first model usually has issues. Sea-Doo stepped up and replaced it which I appreciate!
@deplorablechump8758 Жыл бұрын
Show us a repair procedure
@andrewshevchuk20624 жыл бұрын
Can I get a link to the repair manual?
@livingdlife40764 жыл бұрын
I love my 2018 GTX limited, but I wish the acrylic finish you all decided to use wasn’t so sensitive. Plus i wish someone had explained this to me during the purchase process and not put a video up 2 years later. I “crazed” a small spot on my brand new ride without knowing better. Also if you recommend to owners to use XPS to lube the pump area, then the hull area where you spray it should be able to resist the XPS lube. Now my tunnel area is all “crazed”. What now?
@Rturoek2 жыл бұрын
Just start building them with aluminum hulls and optional uhmw. Little to no maintenance. The hunting guys will love it.
@donls1sscme4 жыл бұрын
tell us about the carbon ring
@martinadair12104 жыл бұрын
As much as I love my gtr 215. With under 60 hours and always garages with cover I'm pretty disappointed my seat cracked.. shattered actually. Not the best manufacturing
@tattoojunk6664 жыл бұрын
Carbon ring? +1
@tolinof79Ай бұрын
Junk fix the cracking problems. Pump tunnels an the front keels are well known for cracking. Its a big issue i see daily
@garygarnett64692 жыл бұрын
Confirm the 2019 GTX Ltd 300 doesn’t have the CM TECH hull
@deplorablechump8758
Жыл бұрын
Is it?
@valueStocks3 жыл бұрын
I hear all these hulls do is crack.
@deplorablechump8758 Жыл бұрын
The booklet is technically useless
@kenshinhimura93874 жыл бұрын
Yamaha nanotech 2 hulls are better and weigh less.
Пікірлер: 15
Sea-Doo try to repair the "crazing" or cracking in my 18 RXTX. After attempting to fix it they eventually bought the ski back and gave me a 19. It took me getting a hold of the president of Marine sales at BRP to get it to happen. I've had no issues with the 2019 model. As anything first model usually has issues. Sea-Doo stepped up and replaced it which I appreciate!
Show us a repair procedure
Can I get a link to the repair manual?
I love my 2018 GTX limited, but I wish the acrylic finish you all decided to use wasn’t so sensitive. Plus i wish someone had explained this to me during the purchase process and not put a video up 2 years later. I “crazed” a small spot on my brand new ride without knowing better. Also if you recommend to owners to use XPS to lube the pump area, then the hull area where you spray it should be able to resist the XPS lube. Now my tunnel area is all “crazed”. What now?
Just start building them with aluminum hulls and optional uhmw. Little to no maintenance. The hunting guys will love it.
tell us about the carbon ring
As much as I love my gtr 215. With under 60 hours and always garages with cover I'm pretty disappointed my seat cracked.. shattered actually. Not the best manufacturing
Carbon ring? +1
Junk fix the cracking problems. Pump tunnels an the front keels are well known for cracking. Its a big issue i see daily
Confirm the 2019 GTX Ltd 300 doesn’t have the CM TECH hull
@deplorablechump8758
Жыл бұрын
Is it?
I hear all these hulls do is crack.
The booklet is technically useless
Yamaha nanotech 2 hulls are better and weigh less.
BIGGEST RUBBISH!!!