A quick overview of the insertion technique for the EZ-Blocker bronchial blocker used for one lung ventilation.
Жүктеу.....
Пікірлер: 14
@moisestyu124 жыл бұрын
Great video.
@outoffears3 жыл бұрын
Thank you🌿
@nergachirimofor10207 ай бұрын
thank you !
@abelos15184 жыл бұрын
Thanks !!
@orio97 жыл бұрын
Fantastic
@OpenAirwayorg
6 жыл бұрын
Thanks Mohamed! Please let us know if you have suggestions for other videos and future content you would like to see.
@survivor707011 ай бұрын
you need to disconnect ventilation before isolation and surgerical incision right? Because if you isolate one side without disconnecting the ventilation..........the lung is not collapsed
@soli48383 жыл бұрын
Hi, I was doing a lung case with a E-Z blocker.. After the OLV in progress...all of a sudden the ETCO2 tracing went flat and I could nt ambue. I met a lot of resistance. Sats were in the high 90s but remained stable. What happened in the lung to create this event? Thank you!
@sahiraftab
Жыл бұрын
Did you recheck with a bronchoscope?
@OpenAirwayorg
Жыл бұрын
Interesting! My first guess would be the blocker slipping back a bit and thus obstructing the trachea. Sometimes if one overinflates the balloon, it will "herniate" over the carina and give this problem. One can maintain oxygenation with small ventilation volumes, but the resistance to flow is high and lack of adequate Vt leads to little or no EtCO2 trace.
@sahiraftab Жыл бұрын
What size bronchoscope were you using?
@OpenAirwayorg
Жыл бұрын
This was demonstrated with either a 3.2 or 3.5 mm fiberoptic bronchoscope - forgive me if I can't recall which! One needs a "paediatric" (4.0 mm or less) bronchoscope, but it is ideal if it has a working channel so that you can suck out any secretions or soiling if encountered.
Пікірлер: 14
Great video.
Thank you🌿
thank you !
Thanks !!
Fantastic
@OpenAirwayorg
6 жыл бұрын
Thanks Mohamed! Please let us know if you have suggestions for other videos and future content you would like to see.
you need to disconnect ventilation before isolation and surgerical incision right? Because if you isolate one side without disconnecting the ventilation..........the lung is not collapsed
Hi, I was doing a lung case with a E-Z blocker.. After the OLV in progress...all of a sudden the ETCO2 tracing went flat and I could nt ambue. I met a lot of resistance. Sats were in the high 90s but remained stable. What happened in the lung to create this event? Thank you!
@sahiraftab
Жыл бұрын
Did you recheck with a bronchoscope?
@OpenAirwayorg
Жыл бұрын
Interesting! My first guess would be the blocker slipping back a bit and thus obstructing the trachea. Sometimes if one overinflates the balloon, it will "herniate" over the carina and give this problem. One can maintain oxygenation with small ventilation volumes, but the resistance to flow is high and lack of adequate Vt leads to little or no EtCO2 trace.
What size bronchoscope were you using?
@OpenAirwayorg
Жыл бұрын
This was demonstrated with either a 3.2 or 3.5 mm fiberoptic bronchoscope - forgive me if I can't recall which! One needs a "paediatric" (4.0 mm or less) bronchoscope, but it is ideal if it has a working channel so that you can suck out any secretions or soiling if encountered.
What is the outer diameter of EZ Blocker?
@OpenAirwayorg
Жыл бұрын
The shaft of a EZ-Blocker is 7 French, so 2.33 mm