What a cracker of a video!! I'm close to buying a GT and having the chance to look under the deck is priceless!! That simple fuse change/upgrade will potentially help many Wolves out there :) Would also like to see inside the controller box!! Keep up the fantastic work Ginger!

Nevermind Ginger, I typed in how to remove the battery and your video popped up. You're showing me how to remove the battery and why my scooter isn't charging. I'm going to check the fuses like you suggested and go from there. Thank you for all of your knowledge and wisdom on these bad boys. Ride That Tasty Wave

Thank you for all the insight. It was very clear and detailed for me. I have the GT pro and all the help with working on it is very much appreciated. Thanks again

Awesome video! Thanks for the in-depth look at the KAABO, your knowledge is much appreciated.

Fantastic video. Very well explained and impressive diagnostics you’ve done to determine and resolve the issue. You’ve saved me from having to take a course on electronics and electrical currents. 👍🏻👍🏻😄 Now I just need to get me a scooter.

That’s called a HRC (high rupture capacity) fuse. The powder in it is sand, and it’s designed to extinguish very high power arcs, the powder in it is sand, and it helps extinguish the arc by melting and getting insulating the arc flash. They’re using those types of fuses in that scooter due to the power levels involved with that huge battery. Also just as a side note they advertise a 6.5A charger for that scooter when there is only a 6.3A fuse on the charge port. These companies need to learn their damn products! Good thing I saw this before buying one.

@1112223333111

Жыл бұрын

yep. those glass fuses will catch fire if it arcs, which it will

Fun technical video Mr. Wheels. Thank you sir...

This reminds me of a fix I have to do on my DT Thunder. I scraped the side of a charge port and it's half hanging out. I need to pull the side rails, battery and remount it. Always something with riders that push our POV's. Great video sir.

@GingerOnWheels

2 жыл бұрын

If the charge port is damaged in any way I would replace it completely. Thats one part of a scooter you don't want to make angry.

Both my fuses blew on my Wolf 11+ using a 5amp charger as well last year. I changed them to better quality fuses and had never had a problem anymore using my 9amp fast charger. Great video Ryan!

@edwindedios1892

2 жыл бұрын

You must change fuse with the exact value for safety. Value of the fuses and type are electrically calculated along with the supplied circuit. Changing fuse with higher value is a mistake. Fuses is a last line of defence in a electrical circuit if they don’t blow fast enough when there’s a electrical fault 2 things can happen 1st more electrical components will get damaged or 2nd fire hazard can happen.

@hyrulemasterchef9573

2 жыл бұрын

Where do you get the fuses

Such useful info on here. Great video.

Thank you so much, I have a 72v wolf king and the fast chargers melted the fuses and this was the same exact problem that I’ve had. Not charging and showing green on both my chargers when the battery didn’t take the power going to it.

Thank you for the upload and this little upgrade hack. Can you please show us the controller panel space etc?

Nice video man...very informative

Thanks for the video.... I blew one of my charging fuses as well.... popped 2 new 250v 8amp slow blow fuses in and wah lah.

Just wanted to let you know your the reason why I didn't freak out when I went to charge and seen one was red and the other was green so I went to my mental file and said wait a minute Ginger did a vid on this. So thanks again for the help 🤙🏽🍻

@GingerOnWheels

Жыл бұрын

😎

Nice video mayn was wondering what it looks like inside.

Hey G.O.W. just wanted to say thank you. You convinced me to get an electric scooter. Since then I've owned 17. Yup. Addiction beyond imagination but honestly the best thing ever for my bipolar. You are a legend. From a happy subscriber in the UK

First off, WOW! There's like NO freaking room in that deck for anything else, it's a giant battery holder! Double WOW, that frayed cable, YIKES. Good thing that fuse blew or you'd probably have a fried scooter or worse. I'm going to watch how well that uber fast charger works out for you. My battery is 52v 23.4Ah (Nanrobot D4+ 3.0) so that charger should work once its dialed in. I'm especially excited by using 1 charger with a single split cable and splitting the amps between the the 2 charge ports, awesome sauce!

@GingerOnWheels

2 жыл бұрын

The most I would charge on your scooter is 9amps. You've got a 14S9P battery. 9 parallel strands each capable of of about 1.3 amps max safe charge. Dial that back by 30% for safety and you're looking at about 9 amps, between the two ports. I don't recommend more than 7 per port.

Great stuff Ginger I just purchased this beast by the looks of it has sure has been put together on minimum a budget. I sure don't like the way the wires are wrapped in cheap looking black plastic kind of wishing I had of seen this video first. Now I know what to expect I will be sealing all wires and maybe changing amps before my first ride thanks again

@jaycarl1562

Жыл бұрын

Why fix something not broken?

Nice little short there... Thanks for the inside view. Will you upgrade those initial thin wires or leave them as factory ?

You should start making lots and lots of videos of how to do things like replace motors replace batterys it would be so help and save so many holes in my wall my wiring was actually very very neat on my scooter

Thanks for sharing. Do have a service manual for the scooter or know where a person could find one? I enjoy exploring but l’d like a road map to reference.

Always have an emergency contingency plan when working on your scooter. Shorts can lead to catastrophic battery fires. There was a post on the electric scooter forum where a guy was messing with a water damaged battery pack and started a fire. He burned his feet and threw the battery into his bathtub where it became a toxic sludge. Just food for thought

My chargers just stopped turning red today, 700miles into ownership on the wkgt no issues yet. Placed an order for the 8A fuses, theyll get here tomorrow, will swap them and let you know the results. Thanks so much for the helpful video

@GingerOnWheels

Жыл бұрын

If you were only ever using the stock 2amp chargers then chances are that your fuses are fine. One thing that did happen to my Wolf King GT though that I didn't make a video of, the wires inside the deck that we're going from the charge port to the fuse actually came detached from the charge port because the battery was pressing on them so hard. One of the downsides of having such a tight fitting battery.

@Movementwithjames

Жыл бұрын

@@GingerOnWheels you’re absolutely right! I was hesitant to dig into it till the fuses showed up (electrical not my thing) but i unscrewed the deck and right there…. loose connection to the charge ports. Plugged in firmly and the chargers light red again! Youre right about it being a tight fit in there.

I use my dualtron storm fast charger to charge battery to 80%ish then use the reg chargers for the rest and it works great

@GingerOnWheels

2 жыл бұрын

Why not just use the fast charger for the whole cycle? Once it enters CV mode then it'll slowly decrease amps to balance your cells.

It'd be cool to see what's inside the controller box I tried looking all over the internet but nobody has done it yet lol

So much technology and power. Such cheap little fuzes. SMH 🤦‍♂️ ✨🤷‍♂️✨Good video. ✨✅✨Your Awesome!

I also have the King GT Pro all black. I received mine with a charging port not working and a bad charger. What my question is once I pull up the rubber matting will I have to use a adhesive or will it restick itself. Also while I am in there should I also replace the stock fuses?

Just had the same issue with my scooter earlier today, tried to change it and the light on the charging brick stayed green. Changed out the fuses and just like that it began to charge. I really would like to see Voro change out these fuses for better ones.

Hi Ginger! I have a kaboo wolf warrior 11+, and I have the same problem, do you know what type of fuse this scooter has? I know you had one for a while and maybe you have this information, greetings from Patagonia!

where did you buy those fast chargers? I have a wolf warrior x pro and my charge time is 12 hours

This happened to me fresh out of the box. One of the charging ports don’t work. Also, the blue lights nor either of the brakes work! Great inspection Voro ! Lol

@GingerOnWheels

2 жыл бұрын

I think I commented on your reddit post today, was that you?

@hyrulemasterchef9573

2 жыл бұрын

@@GingerOnWheels yes!! That’s me! I’m just now seeing your comment, yes it turned out to be a disconnected wire. It’s just unfortunate they cut those corners. - your probably wondering 💭 what does Hyrule master chef mean ? I have a Zelda channel for breath of the wild haha and a huge fascination for scooters. Your video actually helped me I needed to know where those screw holes and wires were! Thanks a million. THIS SCOOTER IS INSANE !!!

GoW this is my exact problem right now. I cant thank you enough for this video. It's given me the courage to take charge of fixing my wolf myself. See what I did there. Thanks so much as always.

@GingerOnWheels

2 жыл бұрын

Glad to hear it! Just be careful poking around in there. Pretty easy to short out the system if you don't know what you're doing!

@donnymukerji

2 жыл бұрын

Thanks GoW. The fuses fixed the issue. Had to get the fuse connectors as well. She’s charging on all 10A again. Cheers mate

I like your super charger! I purchased a similar looking charger which has two dials, one dial allows voltage adjustment, up to around 125 or so volts, and the second dial (potentiometer) allows amperage adjustments, i think up to 15 amps or so. this charger was made by someone that rides and is a part of the electric unicycle community. Great video! The wolf king gt pro is presently my favorite scooter. I love the stability of the ride at high speeds. i traded my nami burn e viper for the wolf king gt pro and i am very happy with the scooter. i may buy a new wolf king gt pro, or possibly wait for the wolf king gtr to come out, which appears to have even more improvements, to the front and rear suspension. i hope the wolf king gtr comes with self sealing/self healing tires, and a thumb throttle! and i would really like to see at least a 45 amp hour capacity battery in the wolf king gtr. or even 50 amp hour would be even better. the range would be very close to infinity :)

@GingerOnWheels

Жыл бұрын

The charger you have is called a Roger charger. It's literally the exact same charger except he employed the factory to add a second dial to it. After he did that then the factory started selling it as the standard format. 99% chance we have a charger from the same factory. 🙂 I agree 100% about your Kaabo feelings. I really wish they'd tried to fit a 40, or even 45ah battery in there.

The more teardown vids i see of electric scooters the more i realize im just riding on a big RC car.

Hey ginger thanks for the advice cause i have the wolf warrior its good to know I'm charging on 6amps my fast charger goes from 2amps to 6amps so 6amps in one port is ok right

@GingerOnWheels

2 жыл бұрын

Its right at the max allowable charge rate. 6amps for a few hours might even blow the fuse. I'd stick to 5 per port unless you've upgraded the fuses.

hey man, just wondering what charger you would recommend after the upgrade, Cheers

Just ordered my GT toinght!

I gotta put 8amp fuses liks i did the stock ones on the wolf warrior is 5amps the king GT pro has the 6amp fuses

Would u recommend this scooter is it worth the price

Easiest way to check the fuse is to use the continuity test on the meter. It beeps if the connection is good and is silent if the circuit is open.

@miguelescobar1338

11 ай бұрын

if you charge it at 6.5a to 10a consistently would the batteries deteriorate or become junk quicker?

Hey can you use 2 fast 5amp chargers on the WOLF GT at the same time for a total of 10amp safely great video btw

@GingerOnWheels

2 жыл бұрын

Yes

@jaycarl1562

Жыл бұрын

Hope you charge like that outside, using anything other than the new stock chargers is asking for trouble. Ginger doesn't care if your house burns down. Thermal runaway will ruin your day.

@GingerOnWheels

Жыл бұрын

@@jaycarl1562 I don't care? Is that why I invented, and sell the FireSak? Jay in your mind this video didn't exist before you saw it, sort of odd. Did you notice this video is a year old? I regularly charge my gt pro at 10amps. Why isn't my Wolf on fire? As long as your charger is putting out 84.3v peak then your battery will be totally fine.

What is that dual cable connector extreme charger??

I am hearing theres a recall on the wolf king gt the battery catches fire or blows controllers. also the from wheel breaks off. theres some threads on reddit. I just ordered the gt pro with TFT and now I'm worried. Apparantly bike stores and not selling them anymore. wtf?? can you update us on yours?

I have a single 5A charger for my GT and have had no problem

@GingerOnWheels

2 жыл бұрын

I had a wolf 11+, and regular king and charged them all the time with two 5 amp chargers. I used the same two chargers on the King GT Pro and the fuses blew 🤷‍♂️. I WAS plugged in outside and some people are telling me that's 'dirty power ', but I think it has to do with that 4 to 3 pin adapter, or maybe just a faulty charger? Either way, I'm happy with the upgrade because now I can rest easy knowing I'm not melting anything charging at 10+ amps.

Okay so charging fuses got plugged back in okay. But today marks the fourth incident that ive gotten error code 5 (undervoltage protection) and the scooter powers off and wont turn back on for some time, while having plenty of battery life left. Do you have any insight on this issue?

I noticed in the beginning of this vid you could see your other scooter in the living room. Looks like you have the “Bad Boy” Horn? I’m new to the channel so you made a video on that please point. If not, maybe make a video in that? I just bought one for my GT and wondering about the wiring and how to tie in Keep up the excellent work and vids! Thanks

@GingerOnWheels

2 жыл бұрын

Good eye! I've had that horn on there for a while and love it. Definitely video worthy, you're right! I'll get that out in the next couple of weeks.

Nice look under the hood Mr Ginger.

I had my deck off recently. I really don't like how the charging port wires are so close to the side of the battery., although the battery seems to be solid inside the case with a little movement and time they can short out to the side of the battery. I would like to see a better design.

Hey Ginger, in the settings menu the magnet count setting specifically, that allows you to calibrate the speedometer correct? If so which direction do I move it? Increase the count to increase the speed reading?

@GingerOnWheels

2 жыл бұрын

Adjust the tire size setting to get the speed more accurate. You should never adjust the magnet count.

@rammo2856

2 жыл бұрын

@@GingerOnWheels what size do you set the tyres to?

How's the silicone mat held on is it just glue? And how do you get it back on?

@GingerOnWheels

2 жыл бұрын

Glue. I just peeled it up in the areas where I know the screws are.

Hi my friend I'm getting to TT and I saw your video and I was looking for the charger I see you have a very special quick charger with two cables can you please give me the details of it thank you very much and keep on moving

them wires will handle up to 30 amps i use the same wires on my icom 756 amateur radio yes the fuse is blown ginge

yo ginger im making a mount for magura brakes to be mt5 brakes to be fitted on kaabo wolf range as im making for mine as there is none around would u like a set to try out when ive finished making ?

@GingerOnWheels

2 жыл бұрын

That would be fun. But I don't have any magura brakes to test them with. Thanks anyway!

What do you think of if I don’t have any on display?. Charger always green connected or disconnected to scooter I

@GingerOnWheels

2 ай бұрын

Fuse is blown.

Hi Ginger. Thanks for this awesome video tutorial. I ran into the problem and replaced my fuses to 8a, but it still doesn't charge. What do you think the problem could be? My king gt is currently sitting with 48% charge and 83.4V which I find a little weird. Would love to hear your input and hopefully a solution. Thank you very much and keep up the good work.

@GingerOnWheels

Жыл бұрын

You have the wrong voltage selected in the display settings of the scooter. At 83v your scooter is already at 100% charge, something in the settings is confused and thinks you only have half charge.

@URASSISGRASS1000

Жыл бұрын

@@GingerOnWheels I've gone through the P-Settings already, but didn't notice anything. I'm trying to find the wolf king gt pro p-setting list, but no luck and all I'm finding are the ones for wolf warriors.

@GingerOnWheels

Жыл бұрын

@@URASSISGRASS1000 you'll have to download a pdf of the manual I guess. I think they are called "advanced settings" on the GT PRO.

I had a weird experience today I charged 1 port with 6amps and one or two hours later added 1.5 amps on the second port and went on a cruise pulled the throttle and it showed up with error one 😐 and the charger is from aliens rides and only has 4 amps or 6 amps should I do 4 amps and then buy a splitter for two ports and do 4 amps on each port

Used the 6.5a charger from fluidfreeride on my king gt pro and it blew a fuse in the front port I believe :l Question ginger: I see people commenting saying you shouldn’t increase the fuse amps… I mean if I put these 8a ones in my scooter and then just use it on 5 or 6.5a it should be absolutely fine no…? I ordered the fuses great video man thanks

@GingerOnWheels

2 жыл бұрын

Yeah it works fine. People online like to repeat things they've read from sources with no experience. The stock fuses are only good up to 5 amps so it wouldn't surprise me that the stock fuse blew at 6.5A.

@TheRealElectricOutdoors

2 жыл бұрын

@@GingerOnWheels got them in and they work mint. Thanks man

Will 10 amp slow blow fuses work I can get that in two days if I go with 8 it going to take a month

@jaycarl1562

Жыл бұрын

If you're looking to achieve thermal runaway, yes get the 10 amp

Where did you get the charger from?

Is there a way to reset the miles

my kaabo wolf Gtr pro arrived yesterday and it has stock chargers one of the chargers switches colors green to red but the other one is just showing red indicating that it's charging so my question is why is one of my chargers switching green to red back and forth does it mean that it's not working do i need a new charger?

@GingerOnWheels

11 ай бұрын

It's probably fine. Leave them both plugged in for a while longer and I bet they both turn green. The charge ports will usually turn green to red at different times.

Can you help me figure out why the rear lights and LED deck lights are not working? I can't find any videos 😕

@GingerOnWheels

Жыл бұрын

That could be so many things. Most likely it's a loose connection in your wiring in the deck somewhere. Disconnect the LEDs and use a multimeter to measure for power while the lights are turned 'on', follow the wires back until you find a break in power.

Just ordered my King GT Pro, don't really want to get in there and replace anything, should I just charge at 4amps? Or is 5amps safe for the GT Pro?

@GingerOnWheels

2 жыл бұрын

I would limit to 8 amps. 4 amps per charge port.

Any chance you can help out with a regular king ? I have two dead charge ports and I have no clue how the fuses look or where you should be located. lots more wires inside the battery compartment of the wolf king it seems.

@GingerOnWheels

2 жыл бұрын

Hey! I think I replied to your Facebook post earlier today. Inside your deck in the same spot as this scooter you'll find the fuse holders. Follow the wires from the charge ports for about 8 inches and you'll see them.

@christianyoung405

2 жыл бұрын

@@GingerOnWheels someone did sisnt know it was you. Posted the question multiple places to get a higher chance of response. Thanks again

After reading all the comments on this video, I am surprised no one has asked this question: Where can I buy/get that 13amp charger?? I want it and need it since my two 1.5amp basic chargers for my Wolf King GT is not enough since I am a daily Wolf King GT driver on Speed 5 Dual Motors ALL DAY LONG!

@GingerOnWheels

2 жыл бұрын

I got mine on Aliexpress and had the cables made custom for the charge ports. Its really easy to catch your stuff on fire with this thing so I'd recommend against it unless you really know a lot about batteries and how they work.

@ajlosangeles11

2 жыл бұрын

@@GingerOnWheels sup Ginger, I just received that 13amp charger from Aliexpress haha. And like you said, it is easy to catch that stuff on fire with this charger. So what voltage should I set the charger on for my 72volt Wolf King GT? I saw on your video that you have it at around 72.5volts to charge your Wolf King GT, that means I should set my fast charger to 72.5volts?

Do you know what the BMS of the Wolf King GT can handle while being charged? I see you're doing 10A... I'm scared even doing 8A. Thanks man.

@GingerOnWheels

2 жыл бұрын

I've only ever gone up to 10 on stock fuses. I did 12 with the fuse upgrade on the king gt pro

@miguelescobar1338

11 ай бұрын

@@GingerOnWheelswould it deteriorate the battery and become junk over time quicker?

it probably blew because all the "experts" say turn on the charger before plugging it into the scooter. plugging in 1 at a time, the one charge port was overloaded with 10 amps on the 1 port before you get the other port on the charger. plug both in and flip the power switch

I saw on new the wolf King scooter got burn out the basement apt ...s

5:20 Ginger has 3 hands

Hey little off topic but I bought the wolf king gt and also got the fingerprint reader. Voro motors told me I had to install it. Any chance you know how complicated it is to install?

@GingerOnWheels

2 жыл бұрын

No I don't. Sorry. If it were me I would cancel the order for the fingerprint reader and just use the password function built into the display of the GT

@curtisjandreau4203

2 жыл бұрын

@@GingerOnWheels didn’t realize it had one on the system

My charger don't charge up to 100% and stay red so I'm going to update a fuse to see if that helped any ideas? I'm also going to throw in the fuse to prevent it from overheating my battery because it shut off when I ride for so long

@GingerOnWheels

Жыл бұрын

Honestly it sounds like you have a battery issue. Or BMS perhaps. If your fuse was bad then it would be an open loop which would turn the charger green. You can try unplugging and reconnecting the XT connectors from the battery to the controller to reset it perhaps, but it sounds to me like you might have a dead cell in your battery somewhere. Id contact your point of purchase for support first, if you mess with the fuses you might void the warranty.

My Wolf Warrior 11 plus came with a 2A charger which is painfully slow, Can I use a 60V 4A charger or even two 4A chargers same time. Thanks.

@GingerOnWheels

5 ай бұрын

Check out PEVoutlet.com. It's my scooter accessory shop and I sell chargers that will work on your scooter with a splitter that run at 9-10 amps. Despite what you hear online that's a completely safe rate to charge your scooter at. Most lithium sells can charge at one C which for your scooter would be 35 amps. The wolf warrior 11 plus has 5 amp fuses for each charge port though so you can run 5 amps into each port safely.

@nafi.j

5 ай бұрын

@@GingerOnWheels Thank you, mate.

I've melted the fuze holders with only 5amps on the Wolf Warrior 11+, it was pretty funny to watch to be honest. The fuze got so damn hot that it wrecked the holder before even getting close to blowing. If I had my way, the charge leads would be one gauge higher and use much cooler fuses that are rated up to the batteries true maximum charge rate. *This melting happened on a Wolf Warrior 11+ that had a dual battery install, there was no real loss as they were completely paralleled after this event so that everything happens all at once to both batteries at the same time and each esc too* *also the fuses used here are ceramic 240v AC rated, running them with DC they will have a slightly different rating, throw the model number of one into google and look around for a data sheet to see how they perform under certain circumstances*✌

@GingerOnWheels

2 жыл бұрын

Its irritating isnt it? A totally healthy charge rate for these massive batteries is still around 25amps, way faster than my wall will even allow. But with the 1.5 amp stock chargers its sortof a joke.

@JamiePineappleWyatt

2 жыл бұрын

@@GingerOnWheels I absolutely agree! I pump plenty of power into my t10-ddm without any issues, I usually take it right to the safe max, although it is much lower due to the 52v 22ah battery 😅 Hint hint, you can get heat shrink the right size online for the battery and some good silicone wire too and replace the dinky charge leads ;)

Can i ask a question please... How much, does the fast charging, affects the battery life? Is faster charging worth the cost?

@GingerOnWheels

2 жыл бұрын

Approx 0%. 'Fast chargers' do charge quicker than stock, but it's not anywhere near what an actual lithium fast charge is. A 35ah battery can fast charge at up to 35amps safely, but scooters and eucs consider 5amps a 'fast charge'. It's not fast compared to what the battery can handle, it's fast compared to stock.

@jaycarl1562

Жыл бұрын

The faster you charge the shorter life of the battery. Charging up to 100%, or 84 volts is also something that would shorten the life of the battery. I only charge 79.5 volts or 80% most of the time. I give it a full charge when I know I need it. Also make sure that you never leave it fully charged for more than 24 hours and do not let it discharge under 25%. Store your scooter between 60 and 75%. Taking care of your battery in this way will get you over 1000 power cycles easily, not doing this and following gingers advice you would get around 300 cycles. The price we paid for this scooter, it's in our best interest to take care of it the best we can. Ginger could care less about how long your scooter lasts he just wants to be right about everything and will never accept or admit when he's wrong.

how would you fix a broken right blinker on the kaabo wolf king gt pro

@Palicene

2 жыл бұрын

following. My left turn signal and deck lights don’t work anymore

@jaycarl1562

Жыл бұрын

Check wires, check for continuity with a multimeter. If you don't know how KZread it.

The reason you're not heating up at 14A is by providing two charging paths, you've created a current divider. You're only pushing 7A per path. The pack can easily take this with zero damage, as a total of 14-15A is less than 0.5C. You could probably push 3C (105A) or better without seeing any effects on the pack.

@miguelescobar1338

11 ай бұрын

will the battery become junk or deteriorate over time if charger consistently between 6.5 to 10a

I’ve had the same problem for months but I don’t have the confidence to open up my scooter, if it’s under warranty then Kaabo should fix it right?

@GingerOnWheels

2 жыл бұрын

I'm not sure about that one. The place you bought it from is the only place that can answer that question.

@DREAD0

2 жыл бұрын

@@GingerOnWheels I bought it from Kaabo, they want me to send it over 75 miles which is going to cost $150 in shipping, I could fix it myself but there’s always a chance it isn’t the fuses…

Yep.... just blew one of my charging fuses... used the speed charger at 6.5 amps... guess that was too much... it's funny they don't tell you that 6.5 is too much.

@GingerOnWheels

2 жыл бұрын

I'm curious who sold you the charger

Can you do the same for the KWW11 60v please

@GingerOnWheels

Жыл бұрын

I no longer own that scooter so, no, I can't !

hi sir, kindly please let me know what is exactly the charger for wolf warrior 11+, or what is best charger, i dont know what to order online

@GingerOnWheels

2 жыл бұрын

You want a 67v dc charger with a gx16-3 pin connector. Anything with less than 5 amp output. I think stock charger is 2.5 amps.

@daomingjeff

2 жыл бұрын

@@GingerOnWheels thank you sir

I been trying to find the charging fuse on my tiursor x13 but no luck can anyone help?

@frayfray6168

Жыл бұрын

x13 does not have fuses so if you have charging problem it is from bms most like[y bad mosfet or in safety mode,, do not charge more than 8 amps for both ports will cause battery to leak in some cells if they used tsl 21700 cells

GT pro not charging. I tested chargers, working as they should. Fuses are good, I just don’t know why it’s still not charging, light stays green. All wires are plugged in. Any chance you know a fix ?

@GingerOnWheels

22 күн бұрын

Could be your charger, have you tried another one?

@gear0neb131

21 күн бұрын

I have 2 chargers, both will stay green. I tested both and they are working as they should. What I did find out is if I run battery down below 15% and plug in the charger will go red but once it hits around 20% it will turn back to green. I just don’t understand. The fuses and wiring seems to be good.

Lol the powder is Cermic fuse 5x20mm 6.3 amp on king gt wolf warrior 11 is 5 amp

Alright now let’s get that thing back together and get a MAX Speed Video! Let’s Go!🤘🏽😆

@GingerOnWheels

2 жыл бұрын

Video out tomorrow 😁

@mannyrides3946

2 жыл бұрын

@@GingerOnWheels sweet

Ginger! I have a serous question! I see you’re charger has 2 outputs? I was thinking of pig-tailing my 8a charger. So i can duel charge with the wolf king. Any benefits? Like what I think would happen in my head. At 8a 84V it will double the a giving me 16A I know the battery can handle 20A etc You’re doing 11A! So that would be 22A total? Or am I missing something?..

@GingerOnWheels

2 жыл бұрын

You're missing something. Stock scooter can only do 10 MAX. I'd save the effort and just use your 8 amp single.

@sleepyhallows3681

2 жыл бұрын

@@GingerOnWheels what do you mean ? The battery accepts 20A charging? What would limit it ?

@sleepyhallows3681

2 жыл бұрын

@@GingerOnWheels btw I have a wolf King..

@GingerOnWheels

2 жыл бұрын

@@sleepyhallows3681 read the title of the video you're commenting on. Did you watch it....? There is a 5amp fuse to each port. 🤦‍♂️

@sleepyhallows3681

2 жыл бұрын

@@GingerOnWheels yes I did watch it ? I replaced both my 5A fuses with 10A fuses..

Just recieved king gt pro, won't turn on, voro sent new tft and still not turning on. Any ideas what may be going on. Voro motors is working with me to figure out the issue but not sure how long that will take. Thanks.

@GingerOnWheels

2 жыл бұрын

Wow. They sent you a DOA scooter and won't take it back? I thought they did quality checks on everything leaving their warehouse hmmmmm. Honestly I have no idea,it could be so many things. Obviously its charged I assume? You're holding down the correct button to turn it on?...

@ericmilan5256

2 жыл бұрын

@@GingerOnWheels Ya they are working with me, just never know what they know if they are just on the sales side. I'm waiting on the head tech to call me. Just hoping that someone has had the same issue and it was a simple plug or switch that I don't know about. But yep could be anything. And yep fully charged took 13hrs, and holding down the small button on the back of the controller.

@jaycarl1562

Жыл бұрын

@@ericmilan5256 Did you get it fixed?

@ericmilan5256

Жыл бұрын

@@jaycarl1562 yep, the guys at voro were awesome . They sent me a return shipping label and I got it sent back the next day. They sent out another scooter 2 days after they received mine and it's been amazing ever since. Never figured out the reason for the failure but the box that is was shipped in was trashed via ups so it could have been a shipping related issue, who knows.

6:00 if you're worried about the quality just get a simple breaker that you can reset. Yes of course it'll be Chinese unless you want a German Borsch type and drop your paycheck on it

@GingerOnWheels

19 күн бұрын

If you get a breaker for both charge ports you'll be hard pressed to fit them inside the deck.

I have a kaabo wolf king gt pro but it’s in error 30 I’m not sure what to do if anyone has experience this please let me know so I can try fix it the speed or nothing is showing

@jaycarl1562

Жыл бұрын

Error 30 - communications/controller error. Most likely a display problem, a wiring harness or the controller. If possible troubleshoot with another display (if you have access to one) ..... Check your wiring harness for damage or bent pins. Pay close attention to the wiring as it leaves the controller going to the wiring harness, making sure no part of the wiring has been smashed by motor flex or random debris Check if you have extensions for the brake levers, throttle or gear sensor. Unplug everything before testing, then test by plugging each component individually in and power cycling the system. Check that you are not pinching the wiring leaving the controller, or the installation is causing the wiring to be pulling out of the wiring exiting the controller. Unplug all plugs in the controller as shown here, then plug them back in. Click here and follow step 2 for bypassing the LCD I'd unplug everything except the display and see if it changes the trouble code. Even to the point of disconnecting the controller from the motor (hall and phase wires) as I think if the 5vdc regulated power supply is being shorted by something, loss of communication will occur. EDIT: May want to check for 5vdc at an easy location like the brake connector (see wiring pin-out below) to check if it's lost or weak first...

I charge my varla eagle one pro at 8 amps through a single port no problem

How much for a replacement battery?

@GingerOnWheels

2 жыл бұрын

I don't sell them

got my king the other day and the charge ports are on the right side, opposite of yours. I'm seeing that it wont charge to 84 volts. the lights stay red only reach 80.*v when I check it.. My battery pack doesnt say LG anywhere on it either.

@jaycarl1562

Жыл бұрын

You do not have the GT Pro, you probably have a Wolf but not the King GT Pro

@1112223333111

Жыл бұрын

@@jaycarl1562 yes its the gt pro. I think the pro has charge ports on the right.

@1112223333111

Жыл бұрын

i.imgur.com/7kcchTu.jpg the sticker says wolf king gt then configuration: pro

@davionsmith9769

Жыл бұрын

I'm having the same problem with my GT I'm going to upgrade the fuse and see if that help it don't charge up all the way to 100%

@davionsmith9769

Жыл бұрын

Would you able to figure out what's the problem?

Is the battery an LG, Samsung or some generic China version? Is there a marking on it anywhere?

@TheLondonCyclist

2 жыл бұрын

Battery is either LG or Samsung. Samsung will probably be in Japan because of their health and safety rules.

@johnphillips8088

2 жыл бұрын

My battery is a LG, the top pin on the back of the charger port is not being used, so they are only using two pins, for positive, and negative connections

@GingerOnWheels

2 жыл бұрын

This battery should be LG or Samsung but I saw no indication of that on the outside of the battery pack. Very odd. I can't verify the brand of cells at this time.

@johnphillips8088

2 жыл бұрын

@@GingerOnWheels mine is clearly marked on top

@TheElectricScooterGuy

2 жыл бұрын

Its a LG the wolf warrior 11+ comes withba Samsung

Nerd? I resemble that remark!

do you ever grease your bushings??

@GingerOnWheels

Жыл бұрын

Grease the bushings? No. Seems like they would just collect dirt that way.

@Vmaxfodder

Жыл бұрын

@@GingerOnWheels can you tell what kind of bushings they use in the back?? no one ever shows them or mentions them ? thanks

theres the BMS module inside the battery. Dont blow the mosfets in there or you are going to have a can of worms. that battery is like 1400 bucks. Do you still think the wolf king is worth it?

@jaycarl1562

Жыл бұрын

Actually its $1000 at voro. Tried them all, the KWKGT is by far the scooter with the least problems. Tried to like the NAMI BURN-E 2 MAX but there where simply to many issues, main one being crazy speed wobble at speeds over 45 mph no matter what you do. The KWKGT has absolutely no wobble at any speed. This is important as I commute on the Wolf 22 miles a day at an average speed of 48mph.

@1112223333111

Жыл бұрын

@@jaycarl1562 I had to put new rear bushings in mine. I got leet3d black. what a difference. so much better. kaabo wont cover that I bet

Interesting

the bms is what gets hot and you cant measure the internal temp of the cells

You must change fuse with the exact value for safety. Value of the fuses and type are electrically calculated along with the supplied circuit. Changing fuse with higher value is a mistake. Fuses is a last line of defence in a electrical circuit if they don’t blow fast enough when there’s a electrical fault 2 things can happen 1st more electrical components will get damaged or 2nd fire hazard can happen.

@TheLondonCyclist

Жыл бұрын

Nonsense.

@ryanmerrill8879

Жыл бұрын

If you use the exact value of charging current it will blow again. Fuses protect against excessive current. You want the fuse to be slightly higher than the current level you want to protect.

@jaycarl1562

Жыл бұрын

Exactly! Thermal runaway is no fun especially in a battery this size.

It’s a long shot but I could anyone on here give me some advice, I charged my wolf warrior x pro with an 8 amp charger and a standard 8 amp charger, the scooter will only turn on when charging and when unplugged the voltage on the display rapidly decreases and switches off. I can’t see the fuses being blown on the charger end as it still turns on when charging

@GingerOnWheels

2 жыл бұрын

Sounds like you charged at 16amps? I could see the BMS being damaged from that, on top of fuses being blown.

@benkellaway8736

2 жыл бұрын

@@GingerOnWheels I charger at 10A using one 8A and one 2A, I realised the fuses are rated at 6A each and that I shouldn’t use 2 different voltage chargers. I messed up the bms. I’ve ordered another battery can’t wait to get it going again.

@TheRealElectricOutdoors

2 жыл бұрын

@@benkellaway8736 is it fixed now