Thanks man. I just gutted my mustang 2 in a very short time. Just need a 1/2 inch speaker jack

@JimVincent

4 ай бұрын

1/4" jack

Hey mate, but Is there a way to make the jack output of the cabinet out? Like a 2x12. I'm asking because i have a 75' reverb which Is really heavy, and i would like to separate them without soldering Every time. Thank you very much and Sorry for my bad english!

Been looking to modding a working small combo into a head only. Basically taking the chassis out. I didn’t put much thought into the left over cab and speaker so I might do something like this so there isn’t much waste. Did you decide to leave the amp chassis in the cab to just make it easier to reuse the jack and mount for it? I am thinking about just making a larger baffle since I am wanting reusing the chassis too. Don’t know if I missed the reason why you went that route. Thanks for the video and the idea!

This video is exactly what I was looking for. Did you use one of the 1/4" jacks already in the amp for the input jack or did you use a different one? I'm doing this to a 1st-gen Peavey Envoy 110 and wondering whether I can just re-wire the speaker cables to one of the 1/4" jacks already in the back of the amp or if I need to use a completely different one.

@SLARPmusic

4 жыл бұрын

hi, i used one of the existing 'speaker out' jacks, where you would connect the extension cab.

@taliqhill7114

3 жыл бұрын

could i use a foot switch jack on the back of my amp?

How did it sound after the conversion versus how it sounded as an amp? I realize your head has it’s own character but did you notice any similarities with how it sounded as an amp? I ask because I have an old Crate amp that sounded great when it worked but is beyond repair. I was hoping if converted to a cab that it would retain sound quality it had before.

Can we use it direct cabinet to multi effect pedal without using head?

@eSLARPmusic

Жыл бұрын

no, you will need some kind of amplification.

What do you think of the Ibanez head ? Has that got the ts circuitry built in?

@SLARPmusic

7 ай бұрын

i don't own the amp anymore, but it was a great clean platform (and yes, it has a tube screamer built in)

can i do this to my line 6

@cameronnalley3197

4 жыл бұрын

peepsmith that’s a dumb question

@thetacticaltildo1139

4 жыл бұрын

If you’re speaker has enough ohms to take from your head then I would say yes

Is it an active or passive cabinet?

@SLARPmusic

3 жыл бұрын

passive. no amp parts left.

A couple of replacement capacitors would be a cheap fix

I cringed when he soldered the wires to the speaker without protecting the speaker cone.

@SLARPmusic

4 жыл бұрын

just trying to keep the tension up ...

How long did this take?

@SLARPmusic

5 жыл бұрын

45 min.

@tsukihime4357

5 жыл бұрын

@@SLARPmusic what kind of 1/4 jack did you use? Also is is just a matter of soldering the speaker wires to the jack? I'm doing this to a Marshall valvestste 8040

turn the music down!!

@SLARPmusic

8 ай бұрын

no!