Great diagnosing of the start problem and so nice to see a young man show so much respect to the gentleman.I know you will get her running like new.

@rosstheoliverman

Жыл бұрын

I’m sure if he brings it over here I’ll be able to get it going for him. Thanks for watching!!!!

The extra wire on the coil should be the by pass /relay feed from the starter solenoid. It by passes the reister to give the full 12 volts to the coil during starting. That starter bendix will chew up the ring gear if it hasn't already. That engine hasn't had any real maintenaince for so long, it needs the valve clearance checked. Run a compression test and see just how good the valves and rings are.

@rosstheoliverman

Жыл бұрын

That’s why I wanted him to bring it here. I want to check all the valves and just give it everything that it needs, a very thorough tuneup. Yeah I thought of that after the fact, it’s like the old Ford trucks they had a bypass wire too to get full voltage while cranking

This video reminds me of that labor rate sign. $100 hr. $125 if someone else worked on it. $150 if you watch. $200 if you try and help. You're far more patient than I.

@rosstheoliverman

Жыл бұрын

🤣 yeah, I’m not really a fan of having somebody watch over me but it was nice having an extra pair of hands.

You're a patient guy with people, have to give you a lot of credit for that.

@rosstheoliverman

Жыл бұрын

It’s a lot harder for me to work when somebody’s watching. I’m much more of a work on my own kind of person.

@ctfarms6471

Жыл бұрын

Not patient in the class room

@rosstheoliverman

Жыл бұрын

@@ctfarms6471 If you knew the stuff I was thinking in my head and not saying out loud, then you’d understand how patient I really am being.

@dennisholst4322

Жыл бұрын

Who made the carburetor for those

@rosstheoliverman

Жыл бұрын

@@dennisholst4322 I was thinking IH built their own

I can see an alternate title in the offing, "Ross The Oliver Man and Tractor Whisperer". Or maybe "More Fun on the Farm with Ross". Your Patience with your "helper" is to be Commended. Another fun video Ross. This is why I look forward to watching Your Videos. Stay Safe and God Bless.

@rosstheoliverman

Жыл бұрын

Thanks Jack! He was a good guy and wanted to help. It’s harder for me to do anything when somebody’s watching me. I find I get a case of the stupid‘s 🤣

@jackbraithwaite8345

Жыл бұрын

Yep! I'm the same way Ross. I get to listening and forget what I was doing. You're a Good Man Ross.👍

@rosstheoliverman

Жыл бұрын

@@jackbraithwaite8345 thanks Jack!!

560 farmall is one of my favorite farmall models. 560 with the German diesel yes sir. Great tractor

I enjoy these videos...keep updates comming on 560. This why the smaller channels are my go to!😁👍

@rosstheoliverman

Жыл бұрын

Thanks Troy!

You can start up a new Red Green show, it was always good for a laugh, I would get the starter fixed first maybe it is low on power from not being wired right according to some of the other comments. Great call to bring it to your place, it will be cheaper for him in the long run and you can check out everything. Great video.👍

@rosstheoliverman

Жыл бұрын

Thanks!!! I think I can definitely improve it. There’s a lot of stuff that needs attention. I don’t know if I can be as good as Red 🤣

Marvellous description of a problem with a miss firing six cylinder gas motor 🇬🇧🇮🇪.

Cool tractor. Interestingly it was almost the end of IH. It had huge rear ended problems and it was the first major tractor recalls in history. Rumors are it cost around 19 million to fix it all. But they fixed it and in the long run it made for some loyal customers.

@rosstheoliverman

Жыл бұрын

There were a lot of them out there even with the problem, so they must’ve fixed it. Thanks for watching!!!

@demontrain4438

Жыл бұрын

I am not an IH person have never worked pn them or drove them. What was wrong with the rear end it would be interesting to hear

@duanecreativemachine

Жыл бұрын

I guess it was a copy of I think the 400 rear and it wouldn’t take at added HP and not all failed but when the did it was catastrophic. They replaced most of the rear parts under recall regardless of if it broke or not.

@user-jp7rk1uf2n

Жыл бұрын

We had a 63. The rear end was updated. Never had a bit of trouble with the whole tractor. It was easy on the diesel fuel and never took any oil or coolant. As far as them costing 19 million, I say Bullshit.

The things you were pointing out on the tractor sure were driving me nuts too. After you get done with it I know it'll run a thousand times better. Thanks Michael

@rosstheoliverman

Жыл бұрын

Thanks Michael! It definitely has a lot of stuff to keep me busy for a while 🤣

@ronaldwhite9954

Жыл бұрын

I kept reaching for the dead blow hammer that I didn't have next to me to tap the starter.

Wow what a mess, on the upside he found you instead of someone else who will take his money and leave him with a broke tractor. Looking forward to seeing this one running correctly in the near future.

@rosstheoliverman

Жыл бұрын

Thanks Cory! I think I can bring it around and make it good again

A guy told me he learned in mechanics school when he was 18-19 years old. 15 is too young, 36 is too old, but 24 is just right. That was the firing order for a six cylinder. (Now 36 is way too young for me.)

@rosstheoliverman

Жыл бұрын

🤣🤣🤣 that’s the exact saying that I learned as well! I tried explaining that to someone the other day and they didn’t get it the first time 🤣

Great video Ross! I’m l@@king forward to the subsequent videos on getting the 560 back up to par!! Have a great weekend Ross!! I want to add…. I appreciate that you explain what you’re doing in regards to troubleshooting the problem. Troubleshooting is something I’m not very good at! Thanks for doing that!! 😊

@rosstheoliverman

Жыл бұрын

Thanks Donald! That was one of the biggest things I had to learn when I started doing KZread, was that I needed to explain what I was doing. In the first videos I just did it and nobody knew what was going on or why I was doing what I was doing.

Looking forward to future videos on that tractor. Man I hope you fix the starter while your at it drove me nuts.

@rosstheoliverman

Жыл бұрын

Thanks Jeff! He’s supposed to bring it some time so we’ll see. Yeah that thing about had me on my last nerve with that grinding 🤣

He needs to change out that bendix drive on that starter. Best thing to do is have the starter rebuilt. You're right, those resistors do go bad over time. Should only be 2 wires going to the coil. Learned a long time ago, when having issues like this, just go through the entire ignition system, clean the carb. readjust valves and double check that timing. These old tractors are so simple to work on. Great video, cheers :)

@rosstheoliverman

Жыл бұрын

Thanks!! Yes, it needs a very thorough tuneup and I think it’ll be good to go.

I couldn't stand that starter , just fix things when there messed up. I agree champion plugs are crap I use ac plugs or autolite . Couldn't stand the oil running all over the place either. Head gasket leaking can't be good too . Better be quiet from turkey creek farms be safe n thankful

@rosstheoliverman

Жыл бұрын

Thanks Earl! Yeah, all that stuff was driving me nuts too. I think that the oil leak is coming from that side plate. That’s one of the things I’m going to address as well.

Even makin IH more better 😮. What a guy ! 😊 #oliver #johndeere

Enjoyed your relaxed demeanor, I am sure the Farmall gentleman did as well👍👍👍

@rosstheoliverman

Жыл бұрын

Thanks! I try to just go with it no matter what happens 🤣

Great Video, I learn something from you in every video.Great Job.

@rosstheoliverman

Жыл бұрын

Thanks Chad!!

Ross, please fix that man's starter! It pained me to hear that. Great video!

@rosstheoliverman

Жыл бұрын

Thanks Scott! That will be the first thing to come off when it gets here 🤣

Looking forward to seeing exactly what the problem is. Too bad you aren’t closer - my neighbor has a 560 that could more than a little love.

@rosstheoliverman

Жыл бұрын

I think I’ll be all loved out on red after working on this one 🤣

Champion plugs used to be a good plug, but for many years now I've had no luck with them lasting in my tractor engines. I seem to have the best luck anymore with good ol' AC plugs. They work well in both my Allis B and John Deere 40.

Your on the right track with the tractor got to figure out what causing the miss could be bad valve or like u say the coil you'll get it right from watching the video you no what your doin have good one take care Ross

@rosstheoliverman

4 ай бұрын

Thank you!

Enjoyed the video. The red ones breakdown as well.

@rosstheoliverman

Жыл бұрын

Thanks Meryl!!

Hope you take us along on this adventure

@rosstheoliverman

Жыл бұрын

I will if he brings it over. It still hasn’t showed up :(

Well that’s the way it goes

@rosstheoliverman

Жыл бұрын

Sometimes better than others 🤣

@daleschroeder8661

Жыл бұрын

Yeah that’s exactly. How I feel. Too it’s ok to have ur Owen opinion about things like that that’s what my Dad. Always said

@daleschroeder8661

Жыл бұрын

Yeah that’s what I live by. Lol

Looking forward to you working on the 560 again With the corn dog lol

@rosstheoliverman

Жыл бұрын

Thanks John!!! I’m sure he’ll be watching while I’m doing it 🤣

there's gotta be a basic equation between coil, point gap, condensor, voltage, and plugs, so we could measure the components and verify the combination. Thanks, Ross, appreciate the walk through and looking forward to finding that bent pushrod and loose rocker. And change the oil for crying out loud.

@rosstheoliverman

Жыл бұрын

Yeah, that poor thing needs a ton of work but it must still be running because he never brought it yet.

I will definitely be watching

@rosstheoliverman

Жыл бұрын

I just talked to the guy today, he’s going to bring it in a few weeks so stay tuned!

I love my 560 but I’m very glad mine is a diesel!

@rosstheoliverman

Жыл бұрын

I drove a 560 diesel once that had a turbo on it. I thought that thing had some life in it!!

green wire is 12v coming from the start button. provides 12volt to the coil when starting and bypasses resistor momentarily

@rosstheoliverman

Жыл бұрын

Thanks!!

Thanks for sharing

@rosstheoliverman

Жыл бұрын

Thanks!

As you know, being the last guy to work on a machine after a dozen guys have tinkered on it is the greatest challenge.

@rosstheoliverman

Жыл бұрын

Absolutely! I’ve encountered that situation several times. It’s much harder to work on after somebody else has failed.

New viewer here- enjoyed the video!!

@rosstheoliverman

Жыл бұрын

Thanks!!! I’m glad you enjoyed it, I never know what I get into so be sure to tune in again 🤣🤣🤣

I found coils wired backwards would not run right. Also a 12v battery charged backwards where the positive became a negative. Once charged correct ran perfectly . Owner changed so many part s for no reason. I had an IHC 300 starter did that. I took a Dremel and cleaned up teeth on flywheel and changed Bendix and nose cone bushing fixed it. Good video,Thanks

@rosstheoliverman

Жыл бұрын

Thanks for watching!!

Great job

@rosstheoliverman

Жыл бұрын

Thanks!!

I'm sure the 560 will start and run as it should when you are done with it.

@rosstheoliverman

Жыл бұрын

I hope so! It definitely can use some love.

@ollie-lk5dx

Жыл бұрын

@@rosstheoliverman I've never seen a engine that was ovehauled 4 years ago be so dirty. lol

Had that been an Oliver it wouldn't have had problems in the first place 😂👍

@rosstheoliverman

Жыл бұрын

🤣 now now, they all have problems eventually no matter what the color!

@jerryfaulkner6518

Жыл бұрын

@@rosstheoliverman I'd take a good non running Oliver over all other colors 😂

I love the 560 tractors but they were the start of the end of international harvester

OH NO ! Watch out Ross you might catch RED Fever ! LOL I just love working on wiring someone else has worked on several times before ! AHHHHHHHHHHHHHHHHhhhhhh Its about as easy to rip it all out and start all over from scratch and you know its right for your own piece of mind. I know you'll get it running smooth as silk again. Bandit

@rosstheoliverman

Жыл бұрын

Yeah, I think it needs some major surgery to straighten out the hack job by the last guy 🤣 i’ll be sure to be careful, I don’t need any red ones hanging around 🤣🤣🤣

@banditfarmer1900

Жыл бұрын

@@rosstheoliverman The only Red ones I would want hanging around is if the were Cockshutt's ! LOL I had the other red ones before and was not all that impressed with them to tell you the truth so I'll stick with the other good green paint ! All and maybe a little Long blue paint just for fun ! I've worked on enough stuff to know a hack job when I see it and when you do you just know your in for a lot of work that will drive you nuts the hole time ! I wish I would have videoed when I got into the dash of the long 900, You aint never seen so much wire behind the dash panel in your life ! Lets just say it all went bye bye and was wired like an Oliver 1550 diesel ! Run fine last a long time ! LOL Good luck working on the IH and "IF" you get to feeling off go to the doctor ASAP ! You dont want red fever ! Oh you missed a really good sale yesterday, The Oliver's went for big money and the JD's went cheep ! Oliver 566 5 bottom semi mount with all new ware parts on it and tires on it went for $550 ! Bandit

Good way to check for leaks on an intake is to spray it with break clean.

@rosstheoliverman

Жыл бұрын

Very true! I should have brought more supplies with me but originally when he called he said he just wanted me to get it back in time. I didn’t think ahead that it might run awful.

one of the extra wires on the coil is from the I terminal on the starter solenoid which feeds full 12 volts to the coil while cranking to make up for voltage drop caused by the starter motor. I would also be very annoyed by that starter, good luck

@rosstheoliverman

Жыл бұрын

I was wondering if that was the case. Thanks Steve! The old Ford trucks did the same thing. I think they have it wired up totally wrong because it looks like it’s already torched the new points.

@arvbergstedt3303

Жыл бұрын

Sounds right. Older delco starter solenoids had a R terminal that gave full battery voltage to coil bypassing resister from ignition switch. Points last much longer when charging voltage about 14.3 volts is cut down by resister to ?? Forget probably about 10 volts.

That coil had me looking for my multimeter. I think that is a winner for the most wires going to a single post on a coil. I'll get the award printed up and sent your way.

@rosstheoliverman

Жыл бұрын

You know the old saying for wiring up stuff: “when in doubt just hook it to the coil.” I bet the guy who wired this up has at least one junction box in his house that has 50 wires going into it.

@ThatOliverGuyChris

Жыл бұрын

I'm thinking that green wire goes into the harness, back where it can't be seen, splices into a red wire, goes back into the harness and goes right back to the coil.

@rosstheoliverman

Жыл бұрын

@@ThatOliverGuyChris that’s true but if it’s like on a grain truck the red wire is three feet long, circles up to the dash and then heads to the coil, just for fun.

@ThatOliverGuyChris

Жыл бұрын

Nobody can listen to AM radio within 100 feet of that 560. You may also be sterile now.

@rosstheoliverman

Жыл бұрын

@@ThatOliverGuyChris I wondered why I could change the TV channels now just by thinking about it.

Those 6 cyl IH are simple yet have a few complicated quirks. I grew up with a 656. The heat riser spring and flap on the manifold are critical. Full fuel flow thru a sediment bowl only is best (although a fuel pump with better filters is a great add on option ). Distributor slop affects running smoothly. Bent push rods can happen when a valve sticks from bad fuel. The 656 had A 6v coil with 12v starter bypass circuit. Also the 656 has an electric solenoid instead of a main jet screw--lots of problems between farm corroded wires and an occasional poorly built solenoid. These are usually sleeved engines, except the c301 in 806 or many of the combine engines.

@karlfischer1011

Жыл бұрын

Interesting that ih has cylinder numbers on the cap. A few distributors interchange but aren't right by application, who knows what's been swapped. There are generally straight or curved points that will fit,, i think the points plate is the determining factor there.. The timing advance mechanism can also rust stiff. We ended up replacing the manifold assembly on the 656 a few years ago and the phantom issues went away! IH wiring can get over complicated with only the lights being fused, and extra wiring like you're finding. kinda like an exercise of how complex can we get.

@rosstheoliverman

Жыл бұрын

It’s amazing how much stuff gets altered over the years by people. The biggest problem with this tractor was being screwed up where it wouldn’t run, I never got to hear what it ran like before to know what the original problem was he was having. If I understood him right the way I left it it was running much better than it has in years and that’s not saying a whole lot.

You have to do a follow-up video - I need the Mystery of the Green Wire solved.... 🧐

@rosstheoliverman

Жыл бұрын

Hopefully he’ll bring it and I can answer your question 😂

new to your channel , wow so interesting

@rosstheoliverman

Жыл бұрын

Thanks James! I’m glad you enjoy the videos!

Thanks

@rosstheoliverman

4 ай бұрын

Thanks for watching!

2 wire coil, my had bent push rod runs good now

I've got a feeling that you probably won't see that tractor again until it totally grenades itself or something in that order. Him running it for at least 4 years with that toasted starter tells me that

@rosstheoliverman

Жыл бұрын

Sadly I think you may be right. He hasn’t brought it yet and he said he was going to in the next few days. I bet it runs better than it has been so he’s just continued using it.

Hey Ross,I'm glad you are helping that guy. His story is very frustrating to listen to. They sell him the wrong parts, then charge him anyways, can't get it running for him, and leave him lost and frustrated with a tractor that is all messed up. And you sir,had it running in a matter of minutes. I'm sure you made his month. Glad there are still people like you helping the people who get left behind and dismissed.

@rosstheoliverman

Жыл бұрын

Thanks! I wish I could’ve got it better for him right then, but if he brings it over here I’m sure I can get it straightened out.

Thanks Ross the Oliver guy LOL

@rosstheoliverman

Жыл бұрын

🤣

Hi Ross don't no if i can help or make this more complicated lol I see your working with a 12v coil with an external balst resistor, the coil has 2 lives to feed it 1 being a 12v feed from your starter so the coil only sees 12v at crank and the second live is from resistor the main 12v live comes from the key to feed the resistor to only give out 7v( if I remember correctly) to the coil so it don't melt the points with them being giving 12v constant . The coils you personally use has this built in to them so only need the 1 feed from the key . Hope this makes sense to you and helps but am inclined to go with you on the mechanic or carb issues as its was running and I think it be far worse running or struggle to start if it was ignition (no back firing etc). Oh plus great videos fella keep them coming 👍

@rosstheoliverman

Жыл бұрын

Thanks Andy! Yeah, I figured that out later on editing the video. The old Ford trucks were the same way they had a hot wire direct to 12 V that was only on during cranking. This poor tractor though needs a lot of wiring sorted out somebody’s been in there hacking and it’s all messed up. Thanks for watching!!!

@andypreston1

Жыл бұрын

You'll get to the bottom of it am quite sure your capable fella 👍 i like the way you work am a mechanic to trade but had to take over the farm when my father passed for my mother , I'm a Scottish farmer and the way I was brought up to look after the machinery isn't any different to yourself and the Scottish we love a good rant lol Keep up the good work 🤣👍

Carl voice …. Ain’t got no gas in it

I like your channel

@rosstheoliverman

Жыл бұрын

Thanks Mark!

the negative wire from coil to the distributor positive wires go to starter and the resistor

@rosstheoliverman

Жыл бұрын

Thanks Richard! They had three wires hooked up and that’s not right. I got a book coming hopefully I can sort it all out. Somebody has rewired a bunch of this and it’s kind of a mess.

Poor old tractor !! it could sure use some TLC.....

@rosstheoliverman

Жыл бұрын

It has a lot of issues for sure.

Man that poor farmer, those parts guys are worse than useless. Your better off starting from scratch, some so called mechanics don't even know how to set #1 cylinder on the dist., That is one of the simplest engine to work on. Install Pertronix ignition, no more worries. At least it seems to be in good hands now. Good luck

@rosstheoliverman

Жыл бұрын

Thanks!

The 560 have all been 12volt.

First problem bad starter okay replace starter. Chances are you’re damaging ring gear on flywheel. Those early c 263’s were known for burnt exhaust valves they updated to IH stalite valves. Which are liquid filled , as far as bored out when overhauled? That engine had thin dry sleeves. Lol Good luck

@rosstheoliverman

Жыл бұрын

Thanks! I think I probably have my work cut out for me on this one

if not bendix bad ring gear. i worked at a 110 cow dairy ALL THE TRACTORS were like that and every make/model hodgepodge every starter alternator no working brakes no working lights and dairy farmers get going 3am 365 he kept his dads beloved case970 that burned to the ground insurance paid for engine rebuild/new tires but everything inside of cab was charcoal because the money ran out i cursed that place everyday they started 1885 and sold out DAY AFTER I LEFT. btw did'nt want to loose my fingers working there i replaced every electric motor silo room conveyors/augers he had been starting them by grabbing on/spinning the pullies to make them start. i asked dimwit boss once why don't you fix the tractors? he said because i've always just pull started them

@rosstheoliverman

Жыл бұрын

Some people can live with a lot of stuff not working but it would drive me nuts 🤣

The coil seems to be a long ways from distributor. The 560 wasn’t even in the same category as Olivers. They were pretty gutless around here.

@rosstheoliverman

Жыл бұрын

I’ve never run one in the field but from the limited experience I have driving on I’ve not been that impressed.

On todays episode of Ross the Farmall man!

@rosstheoliverman

Жыл бұрын

Hopefully it doesn’t become a habit! It just feels wrong 🤣🤣🤣

@travisstrader7722

Жыл бұрын

The first thing I would do is throw those champion plugs in the garbage lol

The oil rings might not have been put in correctly, but u said it does not smoke

@rosstheoliverman

Жыл бұрын

It’s hard to say. If he brings it over to work on more I’m sure I’ll have a better idea of it’s condition.

When he said he had over hauled it himself I thought well that explains alot right there. Most of the young mechanics have not been trained to diagnose a problem just to plug in the test equipment and replace what it tells them to. That is not their fault it is the lack of basic training for how things work and why. I have heard the statement, you don't know what you don't know. The dealer mechanics didn't have the basic diagnostic training to figure out that all of the basic requirements for it to run correctly were not working properly. I have done some of my own work but I know what I don't know so it goes to the shop where my mechanic can diagnose and fix it correctly. He knows I am not going to second guess what he does because he fixes what is wrong and it is correct. Good mechanics are worth the money but part changers are not.

@rosstheoliverman

Жыл бұрын

There’s too many folks that put their trust in the computer and don’t learn the nuts and bolts side of things. The computer won’t tell you everything.

OLD IRON,my friend

Your all right you no your stuff and if you don't you go back to the specs.good man no your wrenching.

@rosstheoliverman

Жыл бұрын

Thanks Phillip!

Is there a part 2 to this tractor diagnosis and repair?

@rosstheoliverman

Жыл бұрын

He never brought it over. My guess is it’s still running “good enough”

I was going to suggest that the green wire might be a low oil pressure/high temp cut out wire, but it didn't go to the negative side of the coil. So tracing it out is probably the solution?

@rosstheoliverman

Жыл бұрын

Yeah, I’m going to double check all the wiring on this thing when he brings it. I think it’s got a lot of stuff messed up.

Good video. Have you ever owned a moline?

@rosstheoliverman

Жыл бұрын

Thanks Lisa! No, I never have owned Moline. I owned one international for a short time and I’ve owned Fords but I think that’s about it.

👍👍

@rosstheoliverman

Жыл бұрын

Thanks Paul!

Sounded like push rod bent to me from what i could hear on phone ,.

@rosstheoliverman

10 ай бұрын

He never brought it over so I guess we’ll never know 😭

Valves need to be set, seemed like the starter would barely turn it over at one point in the revolution

@rosstheoliverman

Жыл бұрын

Yes, it needs a lot of attention. He’s going to bring it to me one of these days and I’m going to give it a good examination.

There is a wire diagram in the owner manual.

@rosstheoliverman

Жыл бұрын

I ordered a book for it so hopefully I’m ready if he brings it over.

That starter did not sound happy. It was a reasonable decision to get the tractor to your place. The wires seem messed up and im not a IH expert. But I don't think the original coil was bad, but that resistor looks very sus.

@rosstheoliverman

Жыл бұрын

Yeah, I hope he brings it. It definitely has things that can be improved.

@SuperMAZ007

Жыл бұрын

@@rosstheoliverman I'm sure you can do miracles with it. I think you can still get a new wire harness as many other things for this IH model. Maybe Steiners tractor parts? Nothing there that can not be fixed and I would peek into the fuel tank for each case. Usually there are gremlins inside that can make it to the fine fuel system.

Modern dealership "mechanic" needs a laptop to "fix" things.

@rosstheoliverman

Жыл бұрын

So true. If the computer doesn’t tell you what’s wrong some people don’t know what to do.

👍👍👍👍👍

@rosstheoliverman

Жыл бұрын

Thanks Mel!

What was the IH in the background? I am a red guy but the 560 was not one of their finest accomplishments................And for the record I own one.

@rosstheoliverman

Жыл бұрын

I’m not sure, I don’t know the numbers of internationals well enough. I think it was one of those 88 series tractors but it didn’t have the sides on it.

@tpfromcentralpa1692

Жыл бұрын

@@rosstheoliverman It was, just curious if it was a 50, 52, or 5488......................at first I thought it might be a 34 or 3688, but it has the heavy rear cast centers so doubt its either of those. I always ask, looking for a 3488 Hydro.

@rosstheoliverman

Жыл бұрын

@@tpfromcentralpa1692 I’ll try to remember to ask him when he comes over.

Is this farmer Ned Beatty or the Skipper from Gilligans Island by chance?

@rosstheoliverman

Жыл бұрын

🤣🤣🤣

Looks like your friend doesn't do much preventive maintenance on his tractors. I would have fixed that starter as soon as IT started acting up

@rosstheoliverman

Жыл бұрын

I never met the guy before this day. He always has his equipment worked on by the dealer and obviously they didn’t want to deal with it anymore because they gave him my number.

@brianhayes7618

Жыл бұрын

@@rosstheoliverman well you got it running for him good job

👨‍🔧🚜👍👍

@rosstheoliverman

Жыл бұрын

Thanks Tom!

Hi Ross good video as always, just wanted to let you know that I'm not sure if it's on my end or your end but every time I try to click on your Amazon store it says sorry can not connect

@rosstheoliverman

Жыл бұрын

Thanks Wayne! I’ll have to check it out. I know it worked the other day when I clicked on it so I’ll see if I can figure out what’s going on.

@waynemilks2352

Жыл бұрын

Thanks Ross for looking into it

@rosstheoliverman

Жыл бұрын

@@waynemilks2352 I think I got it fixed! Let me know if it gives any more trouble. Thanks!!

@waynemilks2352

Жыл бұрын

Working well Ross Thank you for taking care of that for me👍

@rosstheoliverman

Жыл бұрын

@@waynemilks2352 no problem! Thanks for letting me know!!

You always start repairing at the point the lat person was working on it. Usually you have to repairwatthey screwed up before you can fix the real problem.

@rosstheoliverman

Жыл бұрын

Yup. That is definitely the case on this one

That tractor looks like it been abused with the oil all over and did you he bring it over and did you get the miss out

@rosstheoliverman

9 ай бұрын

No, he never did bring it. I figure it must still be plugging away even though it runs terrible.

The advance doesnt seem to do anything ??

@rosstheoliverman

Жыл бұрын

It’s definitely a sick horse. I hope he brings it over so we can make it better.

fix bedix, try high test gas , replace points and coil to12volts and spark plugs to motorcraft. can't tell number right off and do away with resister. or put a german 310 Diesel in it.

@rosstheoliverman

Жыл бұрын

It needs a good checking over for sure. Just a few little improvements would make a lot of difference!!

You getting shocked startled me - please avoid doing so in the future. 😜

@rosstheoliverman

Жыл бұрын

⚡️⚡️⚡️⚡️

Nope not seen 3 wires on coil just one coming in and the other going out .

@rosstheoliverman

Жыл бұрын

Somebody definitely had a lot going on on here 🤣

I'm surprised you don't know how to time the engine with a test light. engine off, bring the engine to the timing mark, doesn't batter if it is on number 1 or 6. put a test light across the non ground side of the battery, this works with both positive ground or negative ground, the test light will go out when the body is rotated in the direction of rotor rotation. When it goes out rotate the distributor in the opposite direction until the test light comes on and lock it down. perfect timing every time, even before ever starting the engine. Sadly this only works with points type distributors.

@rosstheoliverman

Жыл бұрын

The test light won’t tell you if you’re on the compression stroke without timing marks. It didn’t appear there were any left on his tractor. He tried to do that before I got there.

@BiigCheeze

Жыл бұрын

@@rosstheoliverman really doesn't matter if number 1 is on compression or exhaust, on a 6 cylinder, you can time it on either number 1 or number 6. try it some time put your timing light on number 1, then try it again on number 6, you will find they will match

@BiigCheeze

Жыл бұрын

@@rosstheoliverman on IH, most of the tractors have the timing mark on the flywheel, under a removable cover

New means never ever worked.

@rosstheoliverman

Жыл бұрын

🤣 True

It would seem you’re a red/green sort of guy…

@rosstheoliverman

Жыл бұрын

It seems like I’ve been working on a lot of red ones lately for people!

@michaelsheeder148

Жыл бұрын

@@rosstheoliverman Ross maybe you might have to buy you Cocshutt tractors so you can definitely have some red tractors 🤣🤣🤣 thanks Michael

6y

@rosstheoliverman

8 ай бұрын

?