Drove the bus right over Iceman.

@raging_rhino2582

4 жыл бұрын

@T BOW are you in charge of chat there TBow? who are you to tell anyone to do anything bruh

@destrujillo7419

4 жыл бұрын

Eat shit

Ice Man has regular company's he works for he cant ditch them for a one off dud who cant mask of a windscreen he has cleaned and polished “So unreliable. I can’t stress that enough.” I wouldn’t come back after that spray did you pay him real money.

@jacqueshoule9269

4 жыл бұрын

i fully agree if you don't trust someone tell him not belittle him on social media t5hat is a "CHEAP' shot

Iceman said if you would pay him your shit would be done by now He knocks whole trucks out in a day don’t blame him for the hold up

@vegasfordguy

4 жыл бұрын

Ice man is the polishing bad ass!

@aliyounis777

4 жыл бұрын

@T BOW yo T BOW

Man you can't do Iceman that way. He a good dude.

@shellyweiers121

4 жыл бұрын

Yes he is Alex a very good guy well said

@mechanichell

4 жыл бұрын

Timestamp please

@alexgonick

4 жыл бұрын

Shelly Weiers thank you :)

@alexgonick

4 жыл бұрын

Aleksandar Spasenovski 28:27

@mechanichell

4 жыл бұрын

@@alexgonick Thanks

IceMan says, where was that work table when I was polishing them rims?

@RR-wm7yr

4 жыл бұрын

😂😂😂😂😂😂😂😂

Looks good Bruce leave iceman alone his a lad he busted his ass polishing the rims did a good job too

@blugods2655

4 жыл бұрын

Mick Taylor I’m sure he was getting paid lol

@calebm.5698

4 жыл бұрын

*Blu Gods* I don’t believe he was, probably just in beer. Bruce needs to be less of a dick

@ArmchairDeity

4 жыл бұрын

I’m actually starting to have difficulty watching the channel... between the work supplies “for Christmas”, the what the actual fuck probation violations (see his other channel for that clusterfuck), and destroying a $120 cooler “just for fun” I’m really getting tired of the constant assholery.

@micktaylor2500

4 жыл бұрын

@@blugods2655 of course he was getting paid

Bud , I think you guys doing great job restoring these old truck. People talking shit aint doing nothing but sitting on there asses trash talking. KEEP UP THE GREAT WORK!

who else was cringing when they didn't sand down the vent cover and flooded it with paint

@jasondeli

4 жыл бұрын

100% lol

@quintin1561

4 жыл бұрын

What is prep work lol

@andrewhill8907

4 жыл бұрын

Up prep is a big factor in how the end product will look.

@MrJoe1129uscg

4 жыл бұрын

The entire paint process was cringeworthy

@mw5905

4 жыл бұрын

At least the camera dude knows how to spray paint from a can...haha

Its your truck..I don't care if you paint it Mossy Oak from a rattle can. You're the one that has to look at it. I am enjoying seeing it coming together mechanically. Nice work.

Had to laugh at little brother’s concern about dust from the road, after his doughnut stunt while the primer was wet.

It's a 50 50 paint job. Looks good at 50 ft or 50mph lol jk

Hey Bruce! I worked for an Int'l truck dealership for 44 years. I can remember when the COF9670's came out. They were all over the place. Now you hardly see them. That screen behind the grille is actually a BUG SCREEN The Int'l emblem on the front should be orange & black. Been following the restoration of your truck. Looks good to me!!

Polishing takes a long time, lots of work too let Iceman take his time it's not like you're using the semi for Daily Business yet.

These videos and this channel just keep going downhill. I fast forward through most of it now just to see the truck and all I get is winch installation on a pickup. Lame.

@2low2roll

4 жыл бұрын

yup me too

@rileyr5342

4 жыл бұрын

Hvw8 _ same

I seen most of the negative comments about the paint job guys. I dont see how they can judge. From my standpoint, its your channel and you guys do what you want. Its not a bad job for the first time. Practice makes perfect guys. looks good to me. Thanks for sharing this series bruce.

Bruce: "Everyone talking crap about the paint." Also Bruce: "Freakin' bug got in the paint."

@super6954

4 жыл бұрын

There are professionals doing real perfect paint jobs in booths and ok or very poor amateur ones being done in far from ideal situations. The only other thing than paint application they have in common is both can end up with a bug or something else in a spot on fresh paint as it dries. It only takes one fly to be in a paint both hiding and commit suicide just at the right time . I'm surprised he only has one bug he commented on ,spraying that truck outside like that to be honest.

@CrushedLuminary

4 жыл бұрын

@@super6954 yeah, so you didn't watch the last episode, and to that end, Bruce didn't show it in this vid. Having now mentioned something about the 1 foot long line of runs, in a cryptic way, the wrap should look really nice. The truck when finished should look really nice.

@super6954

4 жыл бұрын

@@CrushedLuminary Oh yeah I watched it and saw the runs whats the point in commenting much more than I did. All the fan boys love the shit paint and other jobs some guys put on youtube and won't hear a wrong word against them. The truck will look nice at 20 foot with the Wrap you won't see most of it. I've been round fixing bad painted machines and nice stuff to know while fixing them for guys. I've painted enough machines here to know how it's done to get stuff right as well when you are close enough to drive and see it's right or not.. I'll just add if you want to see nice painted crap from far go to a Ritchie brothers auction and look at one of their 5 gallon overhauls on sandblasted junk that is full of rust pits L.O.L.

@CrushedLuminary

4 жыл бұрын

@@super6954 there's a big difference from someone who knows how to paint, in a booth, and "being done in far from ideal situations". Or is there? ~Certified Body & Paint

@CrushedLuminary

4 жыл бұрын

Unless you're MAACO or Earl Scheib (I always take a dig at those two)

I was originally mad when I saw you didnt take the time to take the horn off but then I heard it at the start of the video. Hope its getting replaced....

@kennyhuskisson2684

4 жыл бұрын

Yes, needs those long kenworth horns from the 70s👍✌

@Brandon-ch2ot

4 жыл бұрын

I would keep the horn and do the Popeye toot every where around town. Makes ppl laugh

Well the Ice Man is an artist! Some artist just have to have that inspiration in order to work. Don’t confuse the Ice Man’s artistic Nature with unreliability!

@skitz2813

4 жыл бұрын

Put the bong away mate

You're doing good. Don't let anyone take the wind out of your sails!

I'm so happy to see how awesome this truck has turned out so far, can't wait to see more

The new name for the Cab Over is officially, “RattleCan”

@raging_rhino2582

4 жыл бұрын

Or maybe "RattleCorn"

"not bad for a amateur paint job, everybody talking crap on the last vid" 😂😂😂😂😂😂😂💀

@lynyrdskynyrd7779

4 жыл бұрын

not me, thinks Bruce did a good job! so shut up all !

@davejohnson3474

4 жыл бұрын

Your supposed to do atleast 2 coats of paint. He only did 1 so not enough material to sand any runs, sand bits of crap or even polish anything out. Just watching 1"how to spray youtube vid" would have shown him that.

@shortvidz9576

4 жыл бұрын

He's the one talking his fat mouth full of shit 😂

@shortvidz9576

4 жыл бұрын

@@lynyrdskynyrd7779 he's an amateur so we know what where dealing with 🤣🤦🏽‍♂️

@ironlung7176

4 жыл бұрын

Im gonna have to say the truck looks pretty damn good.👍

When I was driving one of the dozen 9670's the company had. I went to a metal shop and had the front vent replaced with louvered aluminum pieces! All of our were cracked and broken. Solved the problem.

Beautiful tractor, I've drawn that type of tractor in my art recently. Living the American Dream.

“So unreliable. I can’t stress that enough.” Pay him good money, and he’ll be there...I hope he never comes back now...I wouldn’t.

@ImGdiddy

4 жыл бұрын

Dick Fitzwell Don’t be so quick to condemn without knowing the circumstances . If you are depending on someone to accomplish a job or ship a part or product at an agreed upon time and they fail to deliver routinely, you could say that they are unreliable although their work or product is excellent. If you don’t get something when promised, I’ll bet that you would be annoyed and angry because it can bring your job to a grinding halt. Your choice is to live with the unreliable source or find another source if one is available. Just something to think about........

@bob5074

4 жыл бұрын

dvs1145 it’s for a KZread video...He was prob paid in beer...Bruce said some racist ass shit to him too...calling him “Boy”...fuck that shit

@saxongreen78

4 жыл бұрын

Agreed - I was hoping that it had been a joke when I read all the comments...so, I went to that point in the vid and watched it twice. No irony. Damn shame about that.

@pauldalkin2573

4 жыл бұрын

@@bob5074 I'm not from US s so things may be different there than in the UK but how is calling someone "boy" racist. It might be condescending but the word "boy" doesn't differentiate between race.

@bob5074

4 жыл бұрын

lesser dog that is definitely racist here in the US

Nothing wrong with a budget backyard paint job. If you look back through my old videos, the black C10 with the flames I painted with rustoleum in my parents driveway, with the $14 harbor freight gravity feed gun. That paint was tough, and would clean up great.

Big thumbs up for the work your doing. It's a work truck with a backyard paint job, but as you said it was never gonna be a show truck. Applauded the time and effort and money your putting into it. It would be easier just to send it to a body shop and have everything done 100%, but you've done most of the work yourself and with limited experience and knowledge. Once the wrap and chromes on I think it's gonna be a sweet little work truck. I'd love a big boys toy like that sitting outside my house.👍🏼

Back in the day International Cab Over's were affectionatly known as Corn Field Cadillac's .

@junkyarddog8277

4 жыл бұрын

Whys that?

@msm6186

4 жыл бұрын

@@junkyarddog8277 IH was one of the biggest Ag eqpt manufacturers - farm tractors, implements, light-medium-heavy trucks, WW-Ii M-1 Army rifles, home refrigerators and chest freezers - even a circa 1910 automobile on 5 ft tall wagon wheels and a crude gasoline engine - popular with rural US Mail carriers! There are several good books on IH's 150 year run. Worth a look. Many towns had IH dealerships. Navistar is the medium/heavy truck legacy operation today.

@carlwilliams8354

4 жыл бұрын

Rod Burger Corn Binders or Binders for short!

Something I can look forward to

What's up Bruce, checking you out from Honduras. I know everyone likes to criticize every little detail about the work being done on this International but the truth of the matter is that the before and after has been a real transformation for this old truck. Any person that knows how much work has been done on this truck will appreciate it and most likely will sell much faster than any other truck that same year because I don't think someone would spend that much money on the truck to bring it up and make it look as clean and nice as you are making this truck look. Some of us would like to have an idea how much do all these repairs cost on this truck... Easy on Iceman. Overall great job Bruce!!!

Hello my friend Bruce Wilson all right. I've been following the rescue of this beautiful truck from the beginning and I'm amazed at how it looks. Congratulations and Happy New Year.

Really disrespectful towards iceman something that should be discussed in private and out here blasting him

@quadvloggs6876

4 жыл бұрын

It's called business lol if you slack you dont get calls back, if iceman cared about his image wouldn't you think he wouldn't fuck around knowing Bruce has a camera with so many eyes watching? Lol I get where your coming from but at the same time like theres a bigger picture, also wasnt hard to tell when he was recording iceman that he didnt really polish the stuff in the quickest manner and fiddled around quite a bit while hes there at the same time trying to charge bruce by the hour haha

@trowaway1510

4 жыл бұрын

You can always leave if you are offended, democRAT

@dustinschings7042

4 жыл бұрын

@@trowaway1510 how TF you gonna bring politics into this???

@Tone9719

4 жыл бұрын

@@quadvloggs6876 iceman doesn't charge by the hour😂

@quadvloggs6876

4 жыл бұрын

@@Tone9719 idk him personally it was just a scenario there snowflake haha

Don’t worry about what people say about it,at least you doing something,and keep it up I think it looks great.

Chrome shade visor with updated chrome markers on top and tint the windows. Can't wait to see the wrap. My moms first truck was an 86 eagle cabover

Got new lights coming in? Can't wait to see the finished project!

I love it in the beginning when he runs his hand down the new paint job and it sounds like sandpaper. Might be a little dry.

@succulentflakesofperfectly5541

4 жыл бұрын

needs clearcoat

@calebm7133

4 жыл бұрын

@@succulentflakesofperfectly5541 its single stage paint you dont use clear coat on idiot

@pauldalkin2573

4 жыл бұрын

@@veeeight1976 you still need a good base to apply a wrap. The whole thing will need sanding again if the wrap has any chance of not lifting and looking sh!t with small imperfections underneath.

@joshuafuller9898

4 жыл бұрын

@@veeeight1976 It's a 20 footer if you're Helen Keller. The whole left side looks like a non-skid finish. It was shot way too dry, with improper gun settings and a very poorly prepped substrate. I hope they learn from this experience. Painting is difficult to master.

@joshuafuller9898

4 жыл бұрын

@@calebm7133 Actually, Summit sells a line of paint that you can use single stage or shoot a clear over But generally, yeah, it's either base clear or it's single stage.

Please do the back lettering of the international emblem black youll be glad u did !! But love the cabover bruce.

@southernoutdoors5515

4 жыл бұрын

Just paint it the correct color ( orange) if your going to spend the time to do the black. Because it was supposed to be orange in color

Coming along pretty nicely Bruce. That International emblem fits pretty well with it being red. Keep it going my friend

Back in the day in Ottawa, KS. Our friends Dad drove a truck that looked almost just like this. Brings back memories...

@derekwells7060

4 жыл бұрын

Hey Drax68! I have friends who used to live in Ottawa, KS! Small world, my friend!

Really disrespectful talking to Ice Man like that. He is an asset to your channel and he deserves all the respect.

Still disappointed that you did all that work and not do a proper paint job

@daveyjones662

4 жыл бұрын

Think you can do better

@17snooker

4 жыл бұрын

@@daveyjones662 is not the question as to can do better. It's the fact they put in so much good work and to let it down on a poor paint job is letting them selves down

@daveyjones662

4 жыл бұрын

Quit being a hater

@daveyjones662

4 жыл бұрын

He did good for amateur and his first paint job

@southernoutdoors5515

4 жыл бұрын

Sleeping Warrior why when your wrapping it it'll never show! You'll never see it..man you guys that are worried how the pain looks kill me. It's not going to show....all he wanted was a clean base for the sticker..

Looking good 🚛🚛🇬🇧🇬🇧.. Amazing what you can do on a budget. Fair play to you...

Being that I was a truck driver in the 70s I like the rig and keep up the good work.

Love the chineseum bolts. They are made of that very rare chineseum metal lol. Also i would re grease the gears in the side cases with some real bearing grease

Lookin good! Can’t wait for the stacks!

Nice truck bro I can't wait to see it when it's done

Happy to see how the truck came out, gave me some inspiration to take on something like this myself.

Looked better before. Stock paint looked so era correct for the shape, and had character. Still a badass rig.

.2:05 sounds like the plastic red air horns for auto lol. THE CAB OVER NEEDS SUM DEEP LOUD SCARE THE PISS OUTTA SOMEBODY AIR HORNS. Cab over looks Better and better, getting put back together, good ol raddle can paint lol

Well done - excellent effort seeing you are out in the atmosphere without protection from the weather. Keep up the good work!!

Can you do a video showing your entire budget for the binder and break down all the costs? it might help others to decide to restore old iron instead of crushing them. This has been great to watch.

Please apologise to Iceman on your next vid...I'm pretty sure you may have missed the gravity of the slur you uttered about him - we are talking about a fellow artisan's livelihood here, after all.

😂😂😂 that horn is so bad. Needs a set of train horns ASAP.

@whyettjensen3292

4 жыл бұрын

Jared Lumbert probably horn blasters 🤘🏽

@TheCustomEverythingChannel

4 жыл бұрын

Yes it does

@coystormo5604

4 жыл бұрын

I don’t think train horn. I think he needs to get the classic medium pitch truck horn.

@andysmith6824

4 жыл бұрын

Get a Nathan 5-chime which sounds incredible (or a 2 chime, I can give you the specific notes for the horns if you want a certain sound or want to sound like a certain railroad. I’m talking about train horns--they’re all over the place out here. My retired Conductor buddy has a boat and he put a Southern Pacific 5-chime on the front. It’s hilarious!

@kennyhuskisson2684

4 жыл бұрын

Kenworth had the long, deep sounding horns, those would be awesome sitting on top of the cab, I think👍✌

it’s pretty cool seeing someone restoring one of these old international cabovers. they kind of disappeared in the last 15 years, but in the early 90s they were literally everywhere with JB hunt and Schneider.

I 've really enjoyed watching the cabover project

Dude that International logo deserves more respect...at least take some time to black out the black areas!

@raging_rhino2582

4 жыл бұрын

I think you might be mistakenly looking to this project from how you would do it vs how this guy does everything "This wench might be a cheapie hopefully it works a little bit" yep... Hopefully...

@ivanwallace3296

4 жыл бұрын

No dice

Haha he needs to go to specsavers if he thinks that's a good paint job! Full of shadows and it needs another couple of coats, The only reason a lot of people watch your channel is they they think your a professional! But your a back yard amateur mechanic at best (cowboy)I wouldn't let you work on a Lego (Toy)truck

@Mrleppy

4 жыл бұрын

Whole truck is getting wrapped dude calm your farm

@joshpursley5244

4 жыл бұрын

Your a stupid person go back to your mommy shed and play xbox idiot u couldn't paint a hot wheels to save your life

@kamilkarwat2706

4 жыл бұрын

patrick mcintyre ding ding ding. Callin it how it is💪🏻

@GeminiWoods

4 жыл бұрын

@@joshpursley5244 I mean it is a pretty shit paint job.

Coming along nicely. Seen it yesterday at your buddies house as I was driving down the road looks 10 times better in person

I like it........ keep up the good work.... You show us out here it can be done..... that poor old truck would have rotted away if it hadn’t been for you.... bravo..

Paint looks good to me under the circumstances! Keep on truckin bruce

Next time you wire wheel a bolt please for the love of god use some vice grips or channel locks to hold it. 🤦‍♂️

@1980bwc

4 жыл бұрын

Why? If you've got the tiniest bit of brains, you're not going to stick your fingers into the wire.

@charliebowman785

4 жыл бұрын

@@1980bwc my man, it's likely the thing to slip out from your fingers so they will end up right into wires spinning with the result we can expect. I guess grabbing the object with the appropriate tool will never be an exaggeration while doing this kind of work. I respect your opinion but believe me, it's painful to get hurt with this thing or with grinding stones of any kind. Best regards!

@charliebowman785

4 жыл бұрын

Excellent 👌 advice. Had taken a tool to do that cleaning work, I wouldn't ever got hurt that bad. Kudos!

@tykerkst

4 жыл бұрын

Just makes me nervous to watch is all. Better safe than sorry I dont think brains are required to know that holding your fingers an inch away from a grinder isnt the best of ideas. To each there own I guess.

@scottgm321

4 жыл бұрын

My wire wheel has a shield on it so now the bolts I think I'll quickly clean that get sucked out of my fingers , get stuck between the guard and wire wheel instead of flying across the shop never to be seen again. Good advice.

Love your rattle can game. Your Not spraying bugs. My daughter was even laughing.

I don't know much about trucks but I love seeing people working on them so I love your show I am from salt lake City Utah

“We’re not going to paint it”

@awesomeguy8392

4 жыл бұрын

@Edgar Scott completely agree

@deltagames3864

4 жыл бұрын

He didn't clear coat it

@calebm7133

4 жыл бұрын

@@deltagames3864 its single stage paint dumbass just dont comment on stuff you don't have a clue about.

@tattmantatt5661

4 жыл бұрын

Caleb m calm down buddy pull your pants out your ass

@tigerbray3992

4 жыл бұрын

LOOKS LIKE THE WHITE TORNADO

I need your buddy Ice to cut my rims , he did a helll of a good Job on your chrome brother . I'm up in Orlando I'll come to him. Throwback cab overs bring back memories 😁

@dalejrfan820002000

4 жыл бұрын

Hey my uncle lives in Florida and he polishes Semi and wheels and fuel tanks

@josephjohnson9074

4 жыл бұрын

Robert ok , what part? I just want the wheels cut for now.

@dalejrfan820002000

4 жыл бұрын

@@josephjohnson9074 Zephyrhills Florida

I like the 9670, nothing wrong with a backyard paint job. Looks good, and thanks for the videos.

On older Scanias, you had to make sure the pump for tilting the cab had to be turned of, or it could build pressure when driving. Hard on the locks. Saw you had the stick in the pump and it had shifted from right to left during the drive

interior reveal assuming it's done?

He knew if he uploaded the ending bit of this video as a separate video it would get no views so whts the best thing todo upload a video of the semi that gets half a mill views of just putting 4 bolts on the truck and fill the rest of the video with something nothing to do with the truck to make the video look longer meaning more views and more money the content for the truck videos got longer with less I them once he seen how many views it was getting making alot of money so he now uploads videos of something that takes a few mins todo and stretch it out to 20 mins make content for the subs and views not thinking about filling your pocket yes you need to make the money back but you lose subs and views by dragging it on

@bluecollartrader1791

4 жыл бұрын

Yup- I bailed out after he took about 14 minutes to do about three small tasks and then said he was on to some uninteresting shit about a winch. Unsubscribed immediately after.

Bruce, the transformation you and your friends have done to that semi is night and day. Well done!

I do love Cabover truck they were the first trucks I every work on right out of trade school

Anyone remember the movie White line fever and the Famous truck the Blue Mule I think the star of the movie was Jan Michael Vincent but actually the White truck with a blue mule painted on the back of it was the star 🌟

Yo I know where dale Earnhardt’s freightliner that pulled his rcr car is sitting, the owner would sale it also, been sitting for a bit. I have pictures if you message me. You should restore it.

@dicksoprano5310

4 жыл бұрын

Better not say that too loud, his bitch of a wife will want a cut!!!

@christhomas7463

4 жыл бұрын

Cleetus needs that for the fleet!

love the cab over vids!

Don't listen to the haters bro. Looks much better now. Keep doing what you're doing. Enjoy the posts 👍

When you get done this truck is going to look amazing

Cool but if got to winch from a tree got to use a tree straps so as to avoid damaging the tree, heavy winching on a cable can cut deep enough to do mega health issues for the tree 😉. Also putting iceman out like that's is kind at all for all the hard work he has done for you sadly went from a like on video to dislike

Can't wait to see the wrap! The one on Toast is incredible

I can't wait to see what the visor looks like on the cabovers. btw Arron is doing an awesome job with the videos. Great job bud. Sorry if I miss spelled your name.im terrible with names. But you used to be so quiet and now your getting into the video and explaining what's going on. That's what makes a great KZreadr is being a part of the video and explain what's going on.great job bud. Keep up the great work.🤘✌️👏👏

Stop having him do it then

Will you just finish it already!!!!

Loving the video series!

That international is looking great!! Keep up the good work

The international emblem is supposed to be red

@southernoutdoors5515

4 жыл бұрын

Actually the colors of international on that truck was orange from the factory...

@tonylee6391

4 жыл бұрын

It will fade to orange with the Florida sun

If you want too put some clear coat on it bri. That would be sweet🚚

@1980bwc

4 жыл бұрын

Single stage paint doesnt need a clear coat.

@davejohnson3474

4 жыл бұрын

1k air dry paint he should have done 2 coats which is what your supposed to do. He knows it you can hear how rough it is when he touches it so whatevers exposed after this wrap is going to get dirty really quick.

Looks really good with the grill on there, nice.

It's night and day from when the truck started out. The job done to date is practical and acceptable , nothing wrong with it.. Good job!

Dang straight put Ice man on blast so unreliable huh

@bryanblackmon5053

4 жыл бұрын

izzyzilla80 I thought the same thing that man bust his Ass on polishing that truck I wouldn’t come around anymore either 🤦‍♂️

@debowh

4 жыл бұрын

Thrown straight under the bus 🤣🤣

@tylertartt4754

4 жыл бұрын

What part of the video did he do that ?

@bryanblackmon5053

4 жыл бұрын

Tyler Tartt the very end of it

@ianwinfield929

4 жыл бұрын

Tyler Tartt 28:20

28:20 - Big oof, man's gonna hear you.

Ole cab over coming together cant wait to see her all wrapped up and standing tall

Love the videos... keep them coming guys!!!!

*Iceman Appreciation Society* *1/ Mia Wallace*

@stupidloser

3 жыл бұрын

It seems everyone is in your society

I would’ve just sprayed clear coat over the original paint and kept it, but to each their own.

@joshuamcpeek4708

4 жыл бұрын

@Sleeping Warrior it would've flaked off

@Fearborne

4 жыл бұрын

@@joshuamcpeek4708 *facepalm*

Great video Bruce the truck is looking good so far can't wait to see when it's all finished and it has sweet exhaust stacks. :) :)

Looking forward to the full reveal of the interior.

The big boy has the painting technique.

Slowly but surely loosing interest in this guy I didn’t come here to watch you install a winch on the front of your second gen

@billplatt

4 жыл бұрын

He started milking the videos for views. 30 minute video and almost nothing of interest got accomplished.

@6PyramideHead6

4 жыл бұрын

you're free to go

@skitz2813

4 жыл бұрын

Oh u poor baby why don't u go back to watching the Kardashians

@rubenbraekman4515

4 жыл бұрын

What do you mean, it's his channel and his content 🤷‍♂️

@guitarhippie

4 жыл бұрын

Same here. It also seems like he's getting cocky and pushy with his friends and family. Ordering them around and whatnot. Plus the unskippable ads are bullshit.

Looking good, people that complain about a paint job on a work truck need to shut it. Been working on my own headache for the last 3 years lol

I've been watching your channel since you started working on this truck and I think you've done a very fine job we were referring to your paint job

Where’s ICE man he is one funny guy