Click HERE for the 24 chip LED boards amzn.to/3qpRTyp Click HERE for the 9 chip LED boards amzn.to/2U47p6Y Support BoostedMotorsports by JOINING Today! kzread.info/dron/3B_Q1mNw1iuS8KkAZi_fUA.htmljoin **Checkout other cool products Boosted Motorsports has tested and recommends HERE** 👇 www.amazon.com/shop/boostedmotorsports

Thanks a lot for this vid, I had bought the peanut led bulbs probably 6 months ago, only to realize they wouldnt work(or so I thought until this vid) saw this at 1am, and ran out to my truck and pulled out the crap led module and replaced with the led peanut bulbs!! Now I can actually see in my truck at night .. took like 10 minutes to swap out!! Awesome!

@graj3da175

2 жыл бұрын

What peanut bulbs did you buy out of curiosity? Those led boards are bright but look cheaply made.

@BoostedMotorsports

2 жыл бұрын

These ones amzn.to/3ByTl7l

I installed these LEDs 6 months ago and they have worked very well so far. For assembly of the light assembly, I used hot melt glue at the posts. It's seems superior to using crazy glue and is easier to remove if necessary in the future.

I did this install over the weekend in my 2014 Ram 1500 Ecodiesel and I can't thank you enough! A year or two ago when I went to replace the bulbs, I thought I was SOL and Dodge told me I would have to buy a new assembly to replace their dull, flickering LED's. Now I have these installed and they are BRIGHT!

Could you do one that shows how to change out the bulbs in the rear seats, when you lift them up?

@jstaroszik

Жыл бұрын

I would also like to see this! I took off one of the caps and almost lost the bulb and had a tough time fishing it back.

Saw your first video on this years ago and finally got around to doing the upgrade. Loving it! Thanks so much for sharing your knowledge!

Very nice those lights are great for at the track trying to read faded time slips lol

Nice! Is there any upgrades to the little ambient light that's in front of the switch for the rear window?

Just use an led T10 bulb. Unless you are landing planes like this guy, they are plenty bright enough.

Finally Did My Upgrade wit the LED Lights (24), Your video was on Point!!! Thank You for that. Only exception is that I have the Sunroof Connection which was kicking my ass! at first but I was finally able to disconnect it. The 24 LED are perfect for me not too much overkill. So far everything is good very satisfied.

thanks a bunch its nice

Those are some brightass lights for sure! Very cool!

Can’t wait to do this to my ram

Thanks for the great video as always. Do you have a video of you changing the small cup holder light in the same console to a brighter LED light?

Super bright, can't say I like how it looks though. Those chipsets do work awesome for the underhood light though.

I like it! Looks good

My truck looks like that I love it.

I like it!

Did I miss a episode thought we would see you fabing on the headliner????? Looks good though!!!!!!

Thank you for your guides a lot! Can you please tell a recommendation on remove or not catalytic converter on ram 1500 iv hemi 5.7? Thank you anyways!

Have you tried replacing the back one? I have 2017 Laramie long horn I am not able to remove/ open it to start with. You had an old video but I was for a different trim. any help

Yo! I recall seeing your video on the led bed light but can’t find it again. I have an 03 Ram 1500 and want to upgrade to the super bright LEDs. Any suggestions?

Man that setup looks like a flood light not just dome lights 🤣

I love your videos. Super clear and simple. I find them very useful! Can you tell me if the backseat light can be upgraded with the same LED panel or we need different size? Best regards from Poland

😏👉🏼 little details HUGE DIFFERENCE it makes the interior look more modern

Are you doing the back one also?

So. Did the brightness wear on you, or are you thinking about going to the dimmer version? As always, I enjoy watching your videos. Great stuff!!!

Does it still work by pushing on them to turn them on individually with this set up?

That looks so blue 😩😩

Awesome video can you do a video on the back seat light please? Make it blue

I like how my name is on the box thing

A lot brighter then stock but I don’t know if it’s the camera they looked kinda blue I’ve got bright white ones in my 5th gen looks like daytime at night inside it

@payloadperformance9706

3 жыл бұрын

i’m really picky with my LEDs, i don’t even do 6k white because that’s a “cool blue” color, i feel like i’m in a cold storage. 5k white is the perfect white.

Love this videos! Following one of your other videos, I did the fog light replacement last weekend. Now you've given me my next project. Keep up the great work!!

Looks great, gotta do the back to match

@BoostedMotorsports

3 жыл бұрын

Yessir thats next

Its dope and too bright at the same time

hey John let's pretend you have a 2013 poverty sled (QC Tradesman) and only the one dome light in the center of the ceiling. What LED do you recommend?

couldn't you put a led 194 in its place?

I swapped these out today on my 2015 ram 1500, I did 4 lights the two map lights and I replaced the driver/passenger side floor lights, those where a direct plug and play with a two pin female plug then just stuck them on. I think they are perfect for the floor lights but the map lights are way too bright for me at night and if I turn one on have that residual light artifact like when you look at the sun! Anyone find ones that aren't maybe such a flood light and more focused, or recessed them in the light more? Also I had old laptop and xbox screws, using those along with a pilot hole to hold down the silver plates.

24 worth is still ? Or should I go with 9

Did you get tired of the 24 LEDs? Lol you went from 9 to 24 so what's the best!?!? Thanks for your cool 4th gen Ram content!

@BoostedMotorsports

2 жыл бұрын

It’s pretty brutal but I got used to it lol

No that’s not to bright I put leds in my Dakota what a world of difference now you have to change that back interior light lol

RAM- Our plastic will sound like it is going to break and sometimes it does.

I did it d*** that she's bright I don't know if that's overkill or what I'll let you know in a week or 2

I just wish we didn't have to take ALL that apart

Have you seen the video where the guy changes out the little white LED cup holder light with a red one? Perhaps something you may want to tackle and make a video on? kzread.info/dash/bejne/aYyfk8iSpsybmbA.html

First?

Excellent video! You did a great job going through all the steps for the removal and replacement of the map lights. I had one map light that was burned out (LED) so I decided of course to remove both of them and replace them with the 24 LED lamp. But I will say the Speed Clips on the upper console on my 2018 2500 Laramie was a Pain in the A$$! I thought I was going to break the upper console. It was sooo stuck, it felt that it was glued in...but it wasn't. The dealership wanted $675 to replace the one burned out LED, which I said hell NO! I was hoping that my truck had the incandescent bulbs, which I had planned to replace with LED bulbs...But no dice. My Laramie has the factory (weak) LED interior lights. Word of caution....the push in sockets were very tricky. You REALLY have to make sure the metal leads touch the socket and stays firmly in place.