Really cool system.

That's a really nicely put together system. Industrial sized BIAB! I love it!

impressive!

Impressive

Hope i can upgrade to this system on 2021 ! Greetings from Chile

@silvermediastudio

3 жыл бұрын

You haven't

Hello could you use this to possibly make a carbonated soft drink ...where all the ingredients would boil in ?

@Brewha

4 жыл бұрын

Hi there -- yes, one can make carbonated beverages, beer, kombucha, chai and other beverages with this system.

Wouldn't adding water post boil compromise the heat sterilization?

@Brewha

5 жыл бұрын

Hi Bill, I prefer to add water pre-boil (during sparge) and control boil rate as needed to tweak final volume, but as long as the water being added is treated (distilled is best) and the temperature at the end of addition is not below 90C/195F it will remove the organisms that will cause problems. (It is important to run boiling wort though the valves during the boil for this same reason -- particularly the bottom dump valve and the racking arm could hold water at the extremity that doesn't heat up enough so flush a bit of boiling wort through the valves to ensure the entire valve is sanitized.)

hai.i am from india.wonderfull job.how much plant cost.

has anyone tried their brews?

We want to do a 2.5 barrel test batch on the 5 BBL. Is that possible? Thank you!!

@Brewha

4 жыл бұрын

Hi there, on our specifications page on the website we recommend 3-5BBL for the 5BBL 4-in-1 fermenter, but 2.5BBL is possible--contact us through our website for details: brewha.com

This looks amazing, I need to know how much water will i waste per batch (for my city sewage board application)?

@Brewha

6 жыл бұрын

The Colander and pump can be cleaned with as little as few gallons of water (sprayed/wiped down) and the same goes for the fermenter. Heat will take care of the rest! (If your water is such that beer stone forms in the fermenter, you will need a traditional chemical clean once in a while -- many customers don't ever need it). I think a generous volume to use for planning would be 2 units of water for every unit of beer produced -- that is one unit for beer and one unit for cleaning. (If you are using tap water for cooling and just dumping that, the volumes will likely be 2 or 3 to one for the cooling--the first unit or two can be captured for the next batch and for cleaning. And of course, if a cold liquor tank is used all that water is recovered.

@Lyron7

6 жыл бұрын

With "Heat will take care of the rest" you mean that you apply a cleaning cycle with heat or that you don't clean the mash tun (and fermenter) at all?

@Brewha

6 жыл бұрын

The mash tun and fermenter just need to be rinsed out with the visible 'soils' being removed. The heat takes care of the microscopic.

Are the fermenters able to hook up to cellar control systems? Is there a whirlpool feature?

@Brewha

Жыл бұрын

Hi Matt -- yes, there are multiple ports for control connection and whirlpool as desired.

I do brew in a basket homebrewing right now. I thought about using same system for my future brewpub but the only issue I see is that if I want to ferment several beers at one I would have to buy several of your systems. price wise it doenst make sense. what am I missing here ?

@Brewha

2 жыл бұрын

Hi Genaro, you don't need multiple systems, just one BIAC system (which includes a fermenter), and as many additional 4-in-1 fermenters as you like (the brew day hardware from the BIAC can be used in each of the additional 4-in-1 fermenters).

How much vertical clearance does this system need? My building only has a 12' ceiling. Any tips on whether or not that's a deal breaker, not only with the BREWHA system, but with any system? Thanks!

@Brewha

Жыл бұрын

Hi JT -- as you are probably aware, the higher ceiling is only needed directly in the brew area (for lifting the Colander out of the 4-in-1 fermenter) and is not needed where fermenters are pushed for fermentation. And yes, a 12' ceiling has worked for many. You can see more details about ceiling heights with the different sizes on this page (email us at brewing@brewha.com with any questions): brewhaequipment.com/pages/clearance-need-to-accommodate-the-brewha-lift-beam

Hi guys. If I happened to be in a position to open a tap room in BC, and purchased one of your BIAC systems, could you share any advise of what I need in regard of licenses and permits?

@Brewha

3 жыл бұрын

A number of BREWHA customers can be hired as consultants to answer these exact questions--see details here: brewhaequipment.com/products/microbrewery-tap-room-brewery-setup-consultant

Some folks serve direct from the bright tank. Is it possible / sensible to serve direct from the BIAC?

@Brewha

3 жыл бұрын

It is certainly possible to use our tanks as a brite/serving tank. For prolonged duration at near freeing temperature we would recommend having us add a layer of insulation to reduce cooling losses/electricity.

Hi guys, quick question, would it be easier to simple have an opening at the bottom of the container where the grain is, instead of tilting the vessel to dump the grain?

@Brewha

6 жыл бұрын

Hi Gino -- dumping is very easy with the tipping cable to tilt the Colander as it is lowered. We looked at various designs with bottom openings but none were as affordable, simple and efficient.

@silvermediastudio

3 жыл бұрын

No. What's more simple than turning and dumping 🤣🤣

Is the hot trub or hot break removed after boiling?

@Brewha

3 жыл бұрын

Yes, during the chill (cold water in the jacket) it settles to the bottom of the fermenter cone and can be removed out the bottom/dump port.

What about the hops you boiled with? Do they just stay in throughout fermentation and end up resting with the yeast? If so, can you pull yeast off the cone for another batch or is it now infested with hops?

@Brewha

7 жыл бұрын

Hi George, whole leaf hops can be contained using our Hop Baskets (on the Accessories page of our website) or a similar device. Especially with the larger systems, brewers will often use pelletized hops as they will settle to the bottom of the cone during chill and can therefore be removed along with break/protein prior to aeration and pitching.

@silvermediastudio

3 жыл бұрын

Use a spider or like every other conical, dump them before pitch.

Best qulity

So you ferment right in your kettle? If you had to do multiple brews in the same week you would have to pump into another vessel to ferment correct? So if you started a micro using this to scale it you would just add fermentation vessels and pump and pitch?

@Brewha

7 жыл бұрын

Hi Chris, the Mash Colander can be inserted directly in each additional BREWHA fermenter so you can brew right in them. Although it can be done, there is no need to pump wort into other fermenters, potentially compromising sanitation along the way. This blog shows how: brewhaequipment.com/blogs/howtobrewbeer/18189829-one-biac-endless-possibilities

@crm75c

7 жыл бұрын

So the elements are in the colander? I see.

@Brewha

7 жыл бұрын

Hi Chris, the elements are in the cone portion of the fermenter under the Colander. They remain there and can be used at low output (ie1-2%) for warming the ferment if in a cold building or for certain styles of beer. Each additional fermenter that can be brewed in (with all temp control accessories) is about 50% the cost of the full BIAC.

@vishamchinkan6920

7 жыл бұрын

Chris McAuliffe thats about right

@silvermediastudio

3 жыл бұрын

I don't think you understand the point of this system.

What kind of all in one thing is this and why isnt one in my house?!!!!!!!!!!!!!

For Startup, In India how much, BBL required? Indian lacking in Craft beer still not there yet, What are your thought about that?

@Brewha

3 жыл бұрын

Hi Divjot, if you India is lacking in craft beer, I think you will need a LOT of BBL. :) But seriously, most of our customers for brewpubs of 50-100 seats have six 5BBL fermenters, for over 100 seats and/or distribution then 6-8 7BBL fermenters.

I didn't see any mention of whirlpooling. Is this possible in the BIAC?

@Brewha

6 жыл бұрын

With a conical bottom, the protein/hop material naturally settles to the tip of the cone where it can be removed through the bottom valve. But a racking arm in the racking port can also be used to whirlpool the wort.

do you have to ferment in that kettle? or could you pump it to a conical fermenter?

@Brewha

3 жыл бұрын

Hi Nathan -- the 'kettle' in that video IS a fermenter. After the boil just chill in place (using the jacket), and ferment. Want to start the next batch? A second BREWHA 4-in-1 fermenter with heaters is all you need.

@AndrewSmithThomas

3 жыл бұрын

@@Brewha but you _could_ pump it out and ferment in another fermenter, right? To my mind that misses the unique selling point of the Brewha that you have everything in one vessel.

@Brewha

3 жыл бұрын

@@AndrewSmithThomas Yes, that is possible, and yes, it does miss the benefits of the BREWHA system.

I would like to know if they sell the plan to build one like that? I am from Argentina.

@Brewha

5 жыл бұрын

Hi NIcolas, we don't sell the plans but we can export systems to anywhere in the world, including Argentina. Email us for details at brewing@brewha.co

@jubhgioubgob

5 жыл бұрын

Cody Zhang can you match the price point as this system? Don’t forget, this system uses less footprint too

@alenabayti5622

4 жыл бұрын

@@Brewha hi ,what the cost?

Thanks for the video. does the jacket temp control fermentation? If not, how else have you seen people control temp during fermentation with your system?

@Brewha

3 жыл бұрын

Yes, cooling water in the jacket controls fermentation temperature. See this article for more detail: brewhaequipment.com/blogs/howtobrewbeer/11296489-controlling-fermentation-temperature-in-the-3-in-1

Cost wise the BIAC 5 BBL system is much cheaper than other 5 BBL systems with a more traditional 3 vessel setup. I love the idea of boiling and fermenting in one vessel but buying multiple 5 bbl systems would add up quickly. Would there be anything stopping you from buying a single 5 BBL BIAC and initially using it primarily as a brewhouse and then fermenting in separate fermenters?

@Brewha

5 жыл бұрын

Hi there -- you don't need to purchase multiple BIACs to get all the benefits (chemical free sanitation, labor, capital savings, etc.). You only need to purchase additional BREWHA 4-in-1 fermenters and heating elements and you can brew directly in each one of those (using the one Mash Colander etc.) that comes with the BIAC system. Each additional fermenter with heating elements is about 40-50% of the Complete BIAC price.

What kind of hoist setup did you find works best for the 3bbl BIAC system?

@Brewha

3 жыл бұрын

We sell the Japanese made Kito/Harrington SER brand of hoist and trolley -- for the 3BBL the 500kg/1100lb is sufficient. brewhaequipment.com/collections/brew-system-accessories/products/kito-ser-010l

@fluffog1729

3 жыл бұрын

@@Brewha Thank you very much!

Are these available in the UK?. Cheers

@Brewha

3 жыл бұрын

Hi Julian -- yes, BREWHA can ship to the UK. Reach out to us directly using the form on the BREWHA website for more details.

For heating and boiling, are you using electricity or fuel?!

@Brewha

3 жыл бұрын

This system uses electricity

@silvermediastudio

3 жыл бұрын

It's coal fired. Shovel sold separately.

How can you get rid of the humidity inside the room?

@Brewha

3 жыл бұрын

Most BREWHA customers use the steam vent and move vapor directly outside. There is also our non-mixing steam condensor: brewhaequipment.com/search?q=vent+condensor

@silvermediastudio

3 жыл бұрын

Close your mouth.

Is there a way to Whirlpool? Can it be done at lower than 170F?

@Brewha

3 жыл бұрын

Hi J -- with the conical shape of the base, solids will gravitate to the bottom port where they can be removed. If one still wants to whirlpool, they can use the racking arm.

@JT-ic9mp

3 жыл бұрын

@@Brewha thanks for the quick answer. Would you say that introducing lactobacillus into the brewhouse is less of a concern since you are heat sanitizing the fermenter everytime? Seems intuitive, but any other precautions you'd take?

@Brewha

3 жыл бұрын

@@JT-ic9mp Hi J -- yes, that is correct. Without hoses/transfers which can harbor bacteria, and with heat sanitizing the fermenter itself, brewing with bacteria is much easier on the BREWHA system. The only caution is to be sure to flush out your racking and dump port during boil, to ensure that they are properly heat sanitized.

Noob question, What is the temperature should I maintain the BREWHA , can keep on garage 85F summer time during this process before kegging or should be climate room ? Thanks.

@Brewha

7 жыл бұрын

Fermentation temperature is easily lowered in the BIAC by cycling cooling water from the Chiller through the jacket (see 'Temperature Control' section in the 'Learn' area of the website for more info). Regarding fermenting temperature, it depends on the style of beer and yeast used - most lagers should be kept around 50-60F and most ales around 65-75F, but some styles, like saison can be fermented at your garage temperature.

where is this project place dear ? i amean your from ?

@Brewha

4 жыл бұрын

Hi Ajay -- our main shop is in Victoria, BC. You can see more on our website brewhaequipment.com

what do you do with all the grain left?

@Brewha

2 жыл бұрын

Most customers either arrange with a local farmer to pick up (as feed for livestock) or compost it.

@ramtharthegreat

Жыл бұрын

My chickens and ducks love mine, especially when it is still warm.

How easy it to expand your brewery with these?

@Brewha

5 жыл бұрын

brewhaequipment.com/blogs/howtobrewbeer/18189829-one-biac-endless-possibilities

Wish this was in Australia

@Brewha

2 жыл бұрын

BREWHA ships to Australia!

Any European version of this system?

@Brewha

5 жыл бұрын

Yes, we have sold to Europe.

@DraGon-cg6ge

4 жыл бұрын

BREWHA Equipment Co Ltd web sito ?

where can i buy this system....and do you people have outlets in kenya or can you export to kenya as well......i have been using a chinese system....God only knows.

@Brewha

4 жыл бұрын

Hi Okello -- we can ship to any major port. For purchase inquiries, please visit our website: brewhaequipment.com/

@eddywidda8508

4 жыл бұрын

Osiepa lets brew something OMERA!! Kendu bay lager coming soon!

@okelloraymond2115

4 жыл бұрын

@@eddywidda8508 whats up dude ...are you from kenya

@eddywidda8508

4 жыл бұрын

@@okelloraymond2115 yes i am , whats the name of your beer?

Do you ship to Mexico?

@Brewha

2 жыл бұрын

Yes. Please email us at brewing@brewha.com for more info.

How much is ? 5bbl

@Brewha

4 жыл бұрын

For up to date pricing, please visit the website brewha.com

Electric drill and bbls of water and a steel conductive pot. What could go wrong?

@Brewha

6 жыл бұрын

Care should always be taken when using electricity, especially around water. That applies in a brewery with bbls of water, as it does in a kitchen when mixing in a small pot. It is safest to use a GFI protected circuit. If one is concerned they might not be able to operate a drill or mixer safely, they could use a wooden stir stick or mash paddle.

celebrating at end..damn rights ..big money!!!!! how much is cost of batch ????

@Brewha

7 жыл бұрын

Of course it depends on scale and ingredients chosen, labor costs etc. but a fairly generous allocation is $0.50/pint for ingredients and $0.50/pint for labor, electricity etc. giving a total COGS of about $1.00/pint.

I would like to buy pls let know

@Brewha

4 жыл бұрын

Hi Vara, for purchase inquiries please visit our website: brewhaequipment.com

@karthikm1231

3 жыл бұрын

Hi. Did u buy this system. Is this system installed anywhere in india?

Is there any reseller in Europe (France would be perfect)?

@Brewha

2 жыл бұрын

Hi Rodj, we can ship direct, but Tim at Le Brasseur du Pape in Eguisheim is a BREWHA consultant in France that can help you. Email us at brewing@brewha.com for more info if you would like it.

@rodjstudio

2 жыл бұрын

Hi, thanks for your answer, I'll shoot you an email

My Request to your company to supply your company's mini brewing units to my place Bhubaneswar city in Odisha state in India

If only i had $25k burning a hole in my pocket :/

@silvermediastudio

3 жыл бұрын

Don't be poor

@tabel4844

3 жыл бұрын

@@silvermediastudio Big difference between not having it and not wanting to blow it on something you don't need. You'll realize that when you get of your moms cellphone plan.

@silvermediastudio

3 жыл бұрын

@@tabel4844 Are you mad because you're poor and can't save up $25K?