Brewers Equipment - Pressure Transfer Kit for The Grainfather Conical Fermenter 🍺💨
www.themaltmiller.co.uk/produ...
Trying to minimise oxygen contact with your lovely latest brew is vital, especially if you have a load of yummy hops in the finished article!
In this weeks video, Rob takes us through the process of how to conduct a closed pressure transfer from a Grainfather Conical Fermenter to a Keg using our in house developed Pressure Transfer Kit.
Пікірлер: 38
Thanks for the tip about weighing the keg to judge the beer volume. I was pondering this exact problem and you've proposed a nice solution!
Excellent video Rob. 2 things I took from it: the JG adapter that screws into the bottom of the GF conical fermenter valve - great upgrade for closed transfer. And - I couldn’t work out how to ensure the keg didn’t just trap the CO2 when transferring. Turns out you can disengage the PRV by turning it 90 degrees. Who knew?(not me). Looking forward to putting this into practice to transfer a hoppy NEIPA and keeping out that pesky oxygen! Thanks, Rich.
sods law, Just purchased from you yesterday and now i will need to buy this too! Great vid, Been looking for a solution on transfering to keg.
Looks good guys. Why did you not include a pressure gauge on the top? This is a must in my opinion! :( Everything else is perfect!
@themaltmiller8438
Ай бұрын
As the GF30 isn't a pressure FV there is no point in a gauge as whilst you can build up enough pressure to push out your finished beer, you also will lose some through the lid seal.
Forgot to purge the beer line tubing, rookie mistake Rob 😂
@markusahl123
4 ай бұрын
How do you do this?
Thanks for the video - subscribed! So why do you prefer this over the GF pressure transfer kit?
@themaltmiller8438
2 жыл бұрын
Hi, put simply it is far less complex which is always a winner in my book;)
Wish I'd seen this before I just ordered my GF30. Will be putting one in my next order I think because the GF branded one looks super complex, and quite frankly I'd rather buy from you guys.
@themaltmiller8438
8 ай бұрын
If you would like then you can place the order and choose collection as your method of delivery we can ship it with the other order. Just add to the notes that you want it shipped together as I think your order will not have shipped yet 👍🏻
@lisacarruthers9649
8 ай бұрын
@@themaltmiller8438 thank you I will do this now.
@lisacarruthers9649
8 ай бұрын
Hi again. I bought the item last night for collection as you suggested, and asked for it to be added to my order, but from the website information today the order looks like it's left without the pressure kit in it. 😕 Do I owe you a delivery charge now?
@themaltmiller8438
8 ай бұрын
@@lisacarruthers9649 In any case we will sort so you don’t pay delivery. Leave it with us…..
@lisacarruthers9649
8 ай бұрын
Knew I could depend on you. Thanks guys@@themaltmiller8438
Dam your videos, more stuff I want to buy😂 I have a new GF fermenter in transit from you as I type. Oh well best I crack on and place another order. Cheers
Get the Grainfather one with the pressure gauge on it then you know how much pressure the lid start bending at 2 pounds
I just ordered it. Question - for oxidation perspective I would love to have this on when fermenting - how would you do about that? install a simple bubbler in a soda bottle?
@themaltmiller8438
Жыл бұрын
Juts put this on instead of your normal airlock, the PRV will act as the airlock. We do this regularly with our brews here and never have any issues
@paskrell
Жыл бұрын
@@themaltmiller8438 great. Really hope they are back in stock soon :)
Could this system work for dry hopping? (On a grainfather conical fermenter) Paul
@themaltmiller8438
3 жыл бұрын
Not sure Paul, what are you thinking?
Does the tri-clamp with the cornie fitting go on from the start?
@themaltmiller8438
2 жыл бұрын
Hey, yes you can fit it from the start if you wish. We have done this a few times and it's no problem at all. 👍🏻
@zindigoboutique
2 жыл бұрын
@@themaltmiller8438 I take it that the PRV is basically a blow off valve in this case?
@themaltmiller8438
2 жыл бұрын
@@zindigoboutique Exactly that
@zindigoboutique
2 жыл бұрын
@@themaltmiller8438 Great!Any idea when they will be back in stock?
Couldnt you attach the gas to gas on both so the head space of the GGC remains full and oushes the beer into the keg prv closed of course
@themaltmiller8438
Жыл бұрын
You could try this yes but there would likely come a point where the pressure would equalise and the flow would stop. This way means you have consistent pressure on top of the beer the whole way through.
@BarFlyBrewing
Жыл бұрын
@themaltmiller8438 I'm going to try it I'll let you know if it works probably fill corny with co2 and then lower its pressure 1st though
Not available to buy in Australia? would love this for my setup
@themaltmiller8438
3 жыл бұрын
Email in, we will send you one.
@infinitreality
3 жыл бұрын
@@themaltmiller8438 thanks, will do. can you do a price for just the tri clover fitting? I have everything else. Would save on postage
@themaltmiller8438
3 жыл бұрын
@@infinitreality email in and our customer services will be able to help sort
hi, is it possible to ferment under pressure with this equipment?
@themaltmiller8438
8 ай бұрын
No, the GF30 fermenter isn't pressure rated. You would need to look at either one of the PET plastic pressure fermenters or one of the other brands such as BrewTools or BrewBuilt www.themaltmiller.co.uk/product-category/equipment/
Where could I purchase the "John Guest 3/8 push fit to 3/8 BSP Adapter PI011213S" In the United States of America?
@themaltmiller8438
Жыл бұрын
Not entirely sure, might be worth trying your local plumbing supply store?