▼EXPAND THIS SECTION FOR IMPORTANT INFO▼ ★THIS VIDEO WAS MADE POSSIBLE BY★ M-Power's really innovative tools: www.m-powertools.com/ *My hand tool collection includes premium tools from Bridge City Tool Works:* bridgecitytools.com/ -Bridge City Combination Squares: bridgecitytools.com/products/combination-squares *Please help support us by using the link above for a quick look around!* (If you use one of these affiliate links, we may receive a small commission) *Some other useful links:* -More videos on our website: stumpynubs.com/ -Subscribe to our e-Magazine: stumpynubs.com/browse-and-subscribe/ -Check out our project plans: stumpynubs.com/product-category/plans/ -Instagram: instagram.com/stumpynubs/ -Twitter: twitter.com/StumpyNubs ★SOME OF MY FAVORITE CHEAP TOOLS★ -123 Blocks: lddy.no/vpij -Mechanical Pencils: amzn.to/2PA7bwK -Lumber pencil: amzn.to/2QtwZjv -Pocket Measuring Tape: amzn.to/2kNTlI9 -Irwin Drill Bit Gauge: amzn.to/2AwTkQg -Nut/Bolt/Screw Gauge: amzn.to/2CuvxSK -Self-Centering Punch: amzn.to/2QvbcrC -Self-Centering Bits: amzn.to/2xs71UW -Angle Cube: lddy.no/10nam -Steel Ruler: lddy.no/10mv7 -Utility knife: amzn.to/3nfhIiv -Center-Finding Ruler: lddy.no/10nak -Bit & Blade Cleaner: amzn.to/2TfvEOI -Digital depth gauge: amzn.to/3mwRf2x -Wood Glue: amzn.to/3mqek6M -Spade Bits: amzn.to/3j8XPtD ★SOME OF MY FAVORITE HAND TOOLS★ -Digital Caliper: amzn.to/384H1Or -Marking Gauge: lddy.no/10muz -Marking knife: lddy.no/10mv0 -Narex Chisels: lddy.no/sqm3 -Stanley Sweetheart Chisels: amzn.to/3y5HDOc -Mini Pull Saw: amzn.to/2UEHBz6 -Gent Saw: lddy.no/ss2x -Coping saw: amzn.to/2W7ZiUS -Shinwa Rulers: lddy.no/zl13 ★SOME OF MY FAVORITE POWER TOOLS★ -Miter Saw: amzn.to/3gqIlQ8 -Jointer: amzn.to/3yc3gfZ -Planer: amzn.to/3mn6BGF -Router: amzn.to/3grD22S -Sander: amzn.to/3DdvD0Y -Cordless drill: amzn.to/3D9ZiIm -Brad nailer: amzn.to/3gsRkjH -Mini Compressor: amzn.to/3mvrmQr -Bladerunner: amzn.to/2Wl0TtJ -Jig Saw: amzn.to/3zetTBY -Scroll Saw: amzn.to/3gq9qDc -Multi-Tool: amzn.to/3muZuMi ★SOME OF MY FAVORITE OTHER TOOLS★ -Drill Bits: amzn.to/3B8Ckzh -Forstner Bits: amzn.to/3kk3wEI -Shop Vacuum: amzn.to/2Wkqnbl -Machine Setup Blocks: amzn.to/3gq7kDh -Counter-Sink Bit: amzn.to/37ZukUo -Featherboard: amzn.to/3DeqHsq -ISOtunes Hearing Protection (Save $10): bit.ly/3BHYdH7 (If you use one of the affiliate links above, we may receive a small commission)

@MichaelMantion

8 ай бұрын

Nixon tried to convert the us to Metric. That was the real reason they faked a scandal to get him out of office.

@Anon54387

8 ай бұрын

If you stop to think of it, the push for the metric system is nothing more than a hatred by many of all things British. That's a really silly reason to adopt a system of measure. The fact is that a base 8 system (and 12 is just 1.5 times 8 and 16, obviously, twice 8) is superior in matters of trade. It works out well, people have written papers on this, for trade and really meshes well with the physical world. Base 10, OTOH, does not. Imagine if we had a 20 hour day with 10 hours for AM and 10 hours for PM. Imagine what a face clock would look like. A base ten system is for those of such limited intellect that they can't deal with anything but powers of 10. The metric system LIMITS thinking, and the world isn't so simple as the base 10 system. People are too afraid and too lazy to actually THINK.

@raymondbaehr3784

8 ай бұрын

Metric is so much simpler. I wish we as a country would just convert. Train the kids in school and jump to metric.

@TGMrac

8 ай бұрын

I didn´t learn French, but i know the way to build numbers is worse than the imperial system. The word for 80 means 4x20. They only count up to 20 and an addition in words.

@FLPhotoCatcher

8 ай бұрын

Please keep using Imperial units, with metric converted plans. It's what almost all woodworkers in the USA use, and based on some of the comments, some people in other countries also use Imperial units when woodworking. It's not a perfect comparison, but it would not be cool to try to get everyone in the world to speak the same language. It will probably happen eventually, but why rush it?

I used to love the metric system because of the easy use of dividing by 10. Seemed natural, it was the same number of fingers I had before I became a woodworker.

@uplink-on-yt

8 ай бұрын

You grew extra fingers?

@vladtepes97

8 ай бұрын

Ouch

@ionrazvan126

8 ай бұрын

​@@uplink-on-ytclearly you never used a saw

@piptyson5512

8 ай бұрын

@@uplink-on-yt 100% human, 0% salamander.

@arawtgabi

8 ай бұрын

Depending on what happened, you can start using the Octal system

This guy has top-tier humor. It was one blow after the other, delivered in the most matter-of-fact voice, that had me chortling. Subscribed.

@khoado1999

7 ай бұрын

IKR! It sounded so informative 😂

@julianivanov3058

7 ай бұрын

Funnily enough that's very reminiscent of British humour

@abstractexchange5057

7 ай бұрын

the inch unit system and other unit system are stupid. It is not because of stupid system, but because that they are not compatible with the international system SI. All other unit systems must compatible with the international system SI. I often use computer programs for technical machines and other engineering tasks. And I often have to store and enter various values for various variables in computer programs, then let computer programs use entered values to calculate various tasks. You know that computer programs use standard known scientific formulas to calculate. If you enter values for variables in different unit system, then any time you add values, you must check the unit used in scientific formulas, then you must convert the added values to required unit systems. It is nightmare in engigeering tasks and scientific tasks. The only solution is that : use universal unit system SI : all programs and people exchage and communicate only with values in SI system. Thus no need to convert and check formulas when you apply variables in scientific formulas. Other unit system maybe comfortable only in conversation communication languages, but not in engineering tasks.

@mikevandenboom5958

6 ай бұрын

He's on his way to be another Leslie Neilson

@michab4083

Ай бұрын

I particular loved the bit about the 10 dollars in a saving account ... The perfect argument for going metric 😂

I prefer metric by a mile.

@smithdoesstuff

Ай бұрын

This is a drastically underrated comment. I’m sorry on behalf of the internet.

@vplph

20 күн бұрын

​@@smithdoesstuff we would say... I won't move a mm towards empirical.

@Birdman953

20 күн бұрын

😂

@user-gb8jp8ew6z

20 күн бұрын

As a european, this is funny and i actually never heard it before.

@rigamortice

19 күн бұрын

I don't

ALL of our imperial dimensions are officially defined using metric units. For example, the inch is exactly 25.4mm (2.54cm) so a foot is exactly 30.48cm and 3 feet (1 yard) is 91.44cm or 0.9144 meter.

I'm from the Czech Republic and while I got mostly used to the US lengths and weights thanks to watching all the cool American bushcraft stuff, I always felt a bit sad that you guys didn't moved to the metric system. The ease of multiplying or dividing by 10 let's my simple brain to do other things. :D

@timosdinkydetailing

8 ай бұрын

I have Several Czech made garden hoses (my wife is Czech) from a company that predated the collapse of communism (two are over 25 years old). The internal diameter is 1/2". It's printed right on the hose!

@RufianEmbozado

8 ай бұрын

​@@timosdinkydetailing So? I keep having to buy irrigation and plumbing material by inches. Same for computer and too many other things. Most hardware is sold in inches and I'm damn sure it's not by the influence of Liberia or Myanmar. It smells more like USA exceptionalism. It must be so great to know there are like 7.5 billion dwarves abroas who disagree with you... and your yards, gallons, ounces, tablespoons and so on. Such a power!

@mernokallat645

8 ай бұрын

@@timosdinkydetailing I have seen new hoses that have 13 mm written on them.

@matthewnirenberg

8 ай бұрын

Respectfully, that ease only exists as long as you either don't have anything right of the decimal, or a select tiny number that's easily manageable. US Customary units get around this as everything is fractions which are easy to work with and there's no numbers right of the decimal to worry about. Once you get into giant numbers right of the decimal and have to do complex math with them, it becomes problematic, especially where rounding gets involved. Round and varying positions (say 4 decimal places on one value, then 8, then 9) for different numbers and your answer is way off what was expected; sure you could pick a point at which to round but at what point does that consistently work when the numbers are coming from multiple different equations? This is why software such as GNU Octave and Matlab exist to perform such calculations rounding at ridiculous numbers of decimal places. When I was at university getting my degree in mechanical engineering was when I discovered the point I made in the paragraph above this one, I was the only person in the tutorial class who kept getting answers that matched the book, most others were off by quite a significant amount. When being asked why I was getting the answer the book had when everyone else wasn't, I demonstrated it to the class. The professor noticed that I was instinctively converting everything to imperial and then solving as fractions whilst everyone else wasn't. When I reached my final answer, I converted back to metric and got the correct answer. Having grown up in the bush in Australia, fractions were taught as a priority and many farmers used "Imperial" (basically the British version of US Customary units). Most land is sold and listed in acres as people understand that better than hectares (which are only used on govt records alongside the acre value).

@matthewnirenberg

8 ай бұрын

@@mernokallat645 Yeah, but remember that it's only directly compatible with new plumbing parts unless they've made it as 1/2" but incorrectly listed it as 13mm. In reality 1/2" is 12.7mm so that's a significant difference when compared to real 13mm. This is why plumbing parts are still made in Imperial and why both are still used in the Commonwealth countries - new houses are metric but older ones (pre-2010) aren't.

I spent 45 years as a machine designer. The SI (System of Units), the official name for the "metric system", is by far simpler than the Imperial System (Customary Units of Measure in the USA). Using the SI System is like learning and becoming fluent in a second language. Once you understand it you can switch back and forth without too much trouble. It's really very easy to learn and way less confusing.

@tienglongmy

8 ай бұрын

I'm a contractor, sorry your metric system is inferior.

@riangarianga

8 ай бұрын

@@tienglongmy Please elaborate.

@newolde1

8 ай бұрын

Fock having to use fractions for everything. Now if we could clean up the English language cuz it's an absolute mess. 😂

@SaurianSavior

8 ай бұрын

@@riangarianga I am not a contractor, but I hardly see how that's relevant. Whether you are a contractor or making use of contractors, the majority of the planet uses metric. I guess it must suck if you're a contractor ONLY doing work in imperial. You basically are restricted to working in the US, Liberia or Myanmar. And there's always the risk of conversion error, like the case of the Hubble mirror.

@KuK137

8 ай бұрын

@@riangarianga He can't, you just took really poor bait from a stupid troll who probably thinks bud light is a beer, poor fellow...

As an American, I was amazed by the ease of calculating volume by size and also the weight. 1ml(of water) is 1 cubic centimeters, which is one gram or in larger terms 1 liter of water is 1000 cubic cm and 1 kilo. Not necessarily as easy if you are looking for the wight of something other than water, but volume still works. Without looking it up, how many gallons are in a cubic foot?

@Scudmaster11

7 күн бұрын

No one does that... there is 0 need for when messuring the weight of water based on its weight... ive never done that my entire life... metric is only good for messuring chemicals and thats where it only belongs... but for everything else... its a awful system... imperial is and always will be better

@samuelbudzinak

6 күн бұрын

1 cubic decimeter of water is not exactly 1kg. At room temperature it is about 997g. It is close, but it is because of water density

@Ragnar8504

6 күн бұрын

@@Scudmaster11 Of course that comes in handy, for example if you want to know whether your floor can hold your new water bed with x hundred litres of water inside it. Or if you're building a DIY raft using air-filled tubes and you want to know how much volume you need to keep your weight afloat. Imperial is only better for those who're used to it, changing is always difficult.

@Scudmaster11

6 күн бұрын

@Ragnar8504 the only thing i hear difficult is you... imperial isnt hard... and we dont normally need to convert... PS messuring air buoyancy with metric is stupid... water beds arent really used (only in vary rare situations are they bought).... ive given metric a try before and hated it... couldnt visualize anything... it was all over reliant on objects and machines as because the numbers are unweildly)... also... if you think converting between stuff in imperial is hard... its not.... you are only nameing the vary few novelty things metric is only better at... but imperial crushes the cpmpetiton by MILES..... achers of land is better (and economic) if you want one that you will never top... achers are known by how much work a famer can get done in one day (back then)... so its a efficient way for land... even though i dont personally use it... its used in land messurement of how much there is

@LTimotheus

6 күн бұрын

@@Scudmaster11Indeed, 1 metric achre, aka 100m^2, aka 10x10m, is better!

I would say we’re at least 7/16ths of the way to being metric but not sure we’ll ever go the whole 9 yards.

I'm old enough that converting to metric is easy on paper, but trying to re-train my mind to visualize things in anything but inches, feet, and yards is going to be a challenge.

@AWZool

8 ай бұрын

You have to pretend, so the next gen. can do this naturally.

@Shadow27374

8 ай бұрын

Oh yes, i have this problem with inches, feet and yard... i am from germany... :D

@pawelzielinski1398

8 ай бұрын

@@Shadow27374 Same here. I live in a metric world. I am from Poland. Fortunately I am a scientist, so we use metric system at work as well.

@LockeClone

8 ай бұрын

It took me about 4 days to really click into metric when I was taking an automation class where the software was only metric. I've kind of lost that "sense" now, but it really wasn't bad.

@M3rVsT4H

8 ай бұрын

Another metric guy here, but fortunate to be comfortable in both systems. I visualise in feet and inches all the time. But I measure and cut in mm.. If that makes sense. I reckon stick with what you know, and as you say, it's easy to do the maths when its time to draw the plan.

I’m from the UK & I remember our conversion to metric. It was a great move. I took my scuba instructors exam, I used metric for the physics portion, most others used imperial. I finished about an hour before everyone else (generally scoring higher).

@carcharhinus_555

8 ай бұрын

Geez, don't even want to think of doing this in imperial units. Speaking of, I wonder how many accidents happened because of imperial-units calculation errors.

@carcharhinus_555

8 ай бұрын

Though as an add on question, we use 10m=+1bar pressure. Do USCS divers use PSI for that as well? Is there some easy way to gauge? Or one just remembers 10m=+14.5 PSI (or is it rounded to 14)?

@thomasherrin6798

8 ай бұрын

I'm from the UK also and whilst scuba diving might be easier in metric we are not all metric yet, its a mixture, the temperature is Celcius though and that's definitely better!?!

@OscarOSullivan

7 ай бұрын

Even beer is metric an imperial pint is 568ml in Ireland a brewers yearly output is measured in hectolitres

@peterking8586

7 ай бұрын

@@carcharhinus_555 Yes, they use PSI.

Friedrich Hassler, the man who created the standard U.S. measurement system, adopted the metric system for the U.S. Coastal Survey, which he initially ran. Small tidbit for those who are interested.

I’m a retired engineer and prefer the metric system. Unfortunately I get forced back to using the imperial system sometimes because many materials in the US are sold in those units. But I have found that metric hardware and fasteners can often be cheaper and easier to find especially online.

@LudwigVaanArthans

4 ай бұрын

The free market provides Supply and demand, fewer manufacturers produce in USC, the vast amount of the rat produce in metric, so the prices go down due to direct competition But I'm sure manufacturers in the US never bother lobbying against metric in your government, that would be self serving and greedy

A funny thing is that although almost everything over here is measured in SI units (that's why you easily can calculate that one cubic meter = 1000 liter etc.), we also have traces of imperial. One common example is computer screens, we buy them in 15, 21, 27 inches - that's just the international standard for them 🙃 No-one knows exactly what it means but we know what screen size we're expecting.

@autohmae

8 ай бұрын

The 19" rack, for datacenter and sound engineers is an other one

@JBB685

8 ай бұрын

I believe the international standard for plane runways is also measured in feet

@autohmae

8 ай бұрын

@@JBB685 probably because flying happens in feet/miles, which came from ships, which didn't change after metric was created.

@EddoWagt

8 ай бұрын

Actually this pretty much only happens with inches for some reason, computer screens, wheel diameters, piping thread sizes. All in inches for some reason. Can't think of any non inch standards (apart from the airplane runways mentioned before, but those are also distances)

@scratchy996

8 ай бұрын

@@EddoWagtIt's funny, because computer screens are in inches, but TV screen sizes are in cm.

As a Canadian, it's even worse up here. We oscillate between metric and imperial so frequently, you'd think we were experiencing convulsions. I love the humorous approach to this subject.

@gometricusa

8 ай бұрын

You can thank your recalcitrant neighbor to the south for that. American pop culture is so pervasive that the USA also hangs up the rest of the world with it's olde fashioned feet, pounds and such. It's so out of place on a modern globe.

@StephFacca

8 ай бұрын

I was going to comment the same. Since we are so close to the US, we use both in an odd, haphazard way. Even worse for those of us who grew up in border towns!

@jimrobertson8357

8 ай бұрын

Here in the UK we would ask for 3m of 2 x4, so we mix and match all the time. Gas is sold in lites but we talk about miles per gallon.

@superd222tube

8 ай бұрын

We have bilingual measuring tapes!

@nicholas5623

8 ай бұрын

Also Canadian here, construction industry atleast is still the old way good ol' feet and inches

I've noticed that since I started using a scale to measure cooking and baking ingredients I find myself measuring in grams voluntarily. I love progress, but I hate change. Surprisingly, this change sneaked in and worked for me.

@Yupppi

25 күн бұрын

Word on that. Ever since I got a kitchen scale I abandoned desilitres and other stupid measures as well. Everything in grams allows my half-decent home cooking to be decent.

@ledocteur7701

9 күн бұрын

@@2001kb As a metric user, pretty much the only reason I sometimes measure ingredients using a cup is because we have a measurement cup with scales for each common powders (sugar, flour, ...) and guess what those scales are labeled as ? grams. It's just a non-mechanical and non-electronic balance disguised as a cup.

@Scudmaster11

7 күн бұрын

Then why use metric if it keeps on changing so often... it is worst then when windows 10 launched and there was a update every 20 minutes

@ledocteur7701

7 күн бұрын

@@Scudmaster11 what do you mean ? metric hasn't changed sinced it's creation. Why would you ever think that.

@Scudmaster11

7 күн бұрын

@ledocteur7701 oh you dont know then... also... it was made with a mistake (its not a perfect system) ((even if it was... it would still be imperfect and awfully flawed))

As I don't live in USA, Liberia or Myanmar I use metrics. But when I am working with a folding ruler I can choose inch or mm. Which is good for measuring, when the hole might not be whole mm but linstead ines up with the inch side of the ruler. Almost all folding rulers in Sweden only uses mm but you can still find the ones with both inches and mm, my favourite ones. Thank you for helping with the fast reading in inches.

As a hobbyist boat builder, most of my work is done in metric. Honestly, I have always hated adding, multiplying, subtracting, and dividing fractions. It is a serious pain and takes far longer than just learning to use the metric system.

@antoniiocaluso1071

7 ай бұрын

ever build an ECO6 micro-cruising catamaran sailboat? 13mm ply/epoxy/glass. Super-cool! I built one. Check it out if you've not. It'll put hair on your chest. haaaaa built a one-sheet tender for it, too. fun :-) next up is a micro canalboat

@abstractexchange5057

7 ай бұрын

the inch unit system and other unit system are stupid. It is not because of stupid system, but because that they are not compatible with the international system SI. All other unit systems must compatible with the international system SI. I often use computer programs for technical machines and other engineering tasks. And I often have to store and enter various values for various variables in computer programs, then let computer programs use entered values to calculate various tasks. You know that computer programs use standard known scientific formulas to calculate. If you enter values for variables in different unit system, then any time you add values, you must check the unit used in scientific formulas, then you must convert the added values to required unit systems. It is nightmare in engigeering tasks and scientific tasks. The only solution is that : use universal unit system SI : all programs and people exchage and communicate only with values in SI system. Thus no need to convert and check formulas when you apply variables in scientific formulas. Other unit system maybe comfortable only in conversation communication languages, but not in engineering tasks.

@jacobh9487

7 ай бұрын

I suppose 16.5cm is a lot more impressive sounding than 6.5 inches of manhood. I have to revert back to college lab mentality, scientific notations etc. Biggest daily thing would be getting used to speeds, temperatures, and body weights in Kg.

@antoniiocaluso1071

7 ай бұрын

guess ol sailingspark9748 is too-busy building some boat, so he can't respond here :-) Heyyy...I'm building myself an modded-Escargot canalboat now. What are you? And where is the least-expensive Epoxy to be found? I use alot :-)

@sailingspark9748

7 ай бұрын

@@antoniiocaluso1071 Sorry, I was away sailing on the Chesapeake leading up the Small Craft Festival in St. Michaels. And no, I have never built an eco6, My boats tends to be long an pointy. A couple of kayaks, a wherry, and I just finished up a Milgate duck punt. My next boat will be Canoe Yawl, just have not decided how big or small I want to go. I tend to get my epoxy from Jamestown Distributors. Being in NJ, the delivery from R.I. is super quick.

As a flight mechanic it would be a 100 times easier if the American engines were designed for metric

@sergio-er1zx

9 күн бұрын

R u working in Boing for any chance? 💀

@markthomas919

9 күн бұрын

Apparently you can hammer on metric sockets onto aircraft spec bolts, Boeing,

@snowleopardseal

8 күн бұрын

It would be 212x easier

@Scudmaster11

7 күн бұрын

Ehh no... miles are better... imperial is better

As a Harley drag racer in Europe, I´m surrounded by either system- drive 320 kilometers to Hockenheim at 34 degrees Celsius, go for a 1.4 second 60feet time, explain how much cc a 96 ci motor has got, get a 3/16" allen wrench to tighten some 1/4" bolts, and enjoy half a liter of beer from Belgium afterwards. Went fine so far. Thanks for making serious stuff fun to watch!!

@paulwinters8920

2 ай бұрын

I have not thought of Hockenheim in a very long time. I was at the Formula 2 race when Jim Clark was killed, that was a long time ago.

@Ryarios

3 күн бұрын

Exactly.

@danh6720

2 күн бұрын

The difference is you get to dabble in Imperial. You don't have to live in it.

I’m Canadian, grew up as a kid in the SI world, adopted into the metric system when Canada flipped and am equally confident in using either system. However, I frame houses 16” on center, using 2x4s, 2x6s, 2x8s etc, do most cutting with either a 8 1/4” or 10” blade on my power tools. When I drive to the local hardware store I keep to an average posted speed of 60 km/hr over a driving distance of 12 kilometres, all the while wondering if the weight of the load of 5/8” plywood will make the trailer tongue weight exceed its maximum rating of 200lbs. Of course during the drive home my wife phones and asks if I could pick up a pound of ground beef, 2 litres of 3% milk, 150-200g of freshly sliced smoked ham. I said “of course I will, but first have to stop and get some gas - hey, did you notice gas prices dropped to 173.9 a litre today!?!?!” Her response: “ great, now we have a few extra toonies to take with us on our trip to the States tomorrow!” And, finally “Yes dear I’ll remember to drive at their posted speed limit of 60mph!” Now I ask you, do I qualify for dual-citizenship, or do I simply have to accept the fact I live in a global world.

@niemi5858

8 күн бұрын

Retired Canadian carpenter here. I lived through the same conversion. I was a foreman with about 20 men working on a large concrete forming job and it was the first project we did with metric drawings. The mistakes were a horrendous cost, all bacuse the guys were trying to convert to imperial. After a couple of days, I had to put a stop to this so I went and bought 20 metric only tape measures and the next morning exchanged with the guys for their old ones. It took a day or so, but they soon got used to it. I only lost 2 men because of it and they were about to be let go anyway.

@kjelllindberg6987

8 күн бұрын

Is your 2x4 actually 2x4? Our equivalent is 45*95mm so it got a bit smaller, old people still call them 2x4 (that would be 50.8x101.6mm). Or is it that raw timber starts at 2x4 and after it is planed it turns into 45x95 if so you are already in metric...

@Ragnar8504

6 күн бұрын

@@kjelllindberg6987 In the US it's much worse, I think the term 2x4 is defined based on some low-grade timber, while modern construction timbers are a higher grade. Other explanations say the 2x4 was measured before drying and milling. Therefore a 2x4 is 1 1/2x3 1/2" or 38x89 mm. Which isn't a lot more than the 5x8 we use in Austria (48x78 mm). We rarely use those for framing walls though, that's 95% metal studs because they're cheaper, lighter and easier to assemble, no nails or screws involved. Load-bearing walls are either masonry or much bigger timbers.

I grew up when Australia converted from Imperial to Metric, my Mum took advantage of it (for a short while) by explaining to the police officer who pulled her over for doing 100kph (60mph) in a 60 kph zone that she was only obeying the speed sign that said 60:)

@zyamadeadborn1785

8 ай бұрын

I heard a story about a guy driving an american car imported used to Russia when he got pulled over for speeding on a highway and when asked how fast he was going said: "Dunno, a hundred?" Cop looks on the dash and says: "Your speedometer is in miles, you dummy!"

@stainlesssteellemming3885

8 ай бұрын

Yep, I remember that transition. I also remember having to master arithmetic using pounds, shillings and pence as well as dollars/cents.

@douglasfeilen4344

8 ай бұрын

I am an Australian. I was doing my Fitting & Machining apprenticeship at the time we were going metric. I was so grateful,much simpler & less opportunity for error. GO METRIC!

@georgegiagios4521

8 ай бұрын

​@@zyamadeadborn1785I had a similar experience in England years ago.i hired a little Vauxhall in London for a trip to Oxford. We drove along the motorway with me complaining about the little piece of s@#t we hired - screaming its head of just doing 100. As we flew past Jaguars and BMWs I looked more closely at the speedometer ... MPH.

@ComboMuster

8 ай бұрын

@@douglasfeilen4344 spoken like a true craftsman.

Your script writing in this video is amazing. It is ironic, smart. really good. I envy your talent.

@noquedaniuno

8 ай бұрын

love the jab about not knowing to use fractions...

@moonrazk

8 ай бұрын

His older videos are full of this snarky writing.

@nellayema2455

8 ай бұрын

He's brilliant!

@Raven.flight

8 ай бұрын

Script writing? You tell lies!! He did this on the fly!!!

@joetoner8848

8 ай бұрын

Could not have said it better!

Just found your channel. I'm on the start of my woodworking journey. Love to see your humor as is high quality as your woodworking knowledge and teachings. Thank you!

One of the things that gets me is when NASA is doing public relations (launching rockets / probes / talking about space stuff etc) it uses imperial units and never mentions metric *despite having to convert from metric to imperial in the first place* . It is literally no effort to say X miles, Y kilometres etc. America could end up like the UK where we tend to use imperial for rough figures and metric for more accurate measurement. For instance We buy fuel in litres, work out driving distances in miles, economy in miles per gallon, but it's all based on metric measurements. We buy milk in either pints or litres, depending on what suits (The amount in the jugs is exactly the same).

I grew up metric but have used inches for decades since moving to the US; years in the construction industry certainly helped that along. I now find myself using millimeters when precision is required and feet and inches for rougher work. What really has me scratching my head is decimal inches, especially rulers with sixteenths on one side and tenths on the other. A trap for the unwary if I ever saw one.

@timjbarnes

8 ай бұрын

And for some reason surveyors like to use decimal feet. Very odd.

@drewbacca1981

8 ай бұрын

I'm a surveyor, decimal feet have ruined inches for me forever

@skipinkoreaable

8 ай бұрын

​@@drewbacca1981My feet are decimal. They have 10 toes.

@Agnemons

8 ай бұрын

Obviously they got cold feet converting to metric.@@timjbarnes

@davidroddini1512

8 ай бұрын

I work in a company that makes windows and sunrooms. The labels/order slips list dimensions in decimal feet and inches but we have “the giant inch” on each machine. This is a 4x5 card with 1 “inch” along the long side divided into 16ths of an inch. It is then marked with dots showing common decimal inch increments such as 3/10 inch. That way workers can tell at a glance approximately where to cut if they only have a standard tape measure with 16ths of an inch but not 10ths.

I was born and raised in the US and now live in Canada. I comfortably switch between imperial and metric; sometimes within the same project. For certain though any time I need to find the center of something, I use metric. Division of whole numbers beats fractions any day.

@etherealbolweevil6268

8 ай бұрын

Quite. I enjoy watching people trying to centre something 43 and 3/8 inches on one side, 44 and 5/16 on the other, how much to move to be in the centre? Long silence. Another long silence. Hit with hammer. Repeat. On the other hand, my workshop is imperial with a mixture of BSF and BA threading tools, fraction and number drills, imperial measuring tools, machine tools graduated in 1/1000 inch. It will not be going metric anytime soon. Multiply that by a whole economy. Unless the US government funds it, there won't be much movement, and it will be hugely expensive as every last broken tool will be dug out to be replaced by taxpayer's money.

@lanzer22

8 ай бұрын

Studied in BCIT and went through the same thing having to learn both measurements, and by learning both I mean spend 90% of my time memorizing the unit rates of all the imperial units.

@SI0AX

8 ай бұрын

@@etherealbolweevil6268 I hate imperial with a passion. I *always* convert imperial to metric before I do anything. And If I have a bunch of damn drills or like 10-20 wrenches or sockets that are imperial, I have to line them up in order to know which one is bigger than the other FFS I *hate* imperial!

@poisonedtruth

8 ай бұрын

@@etherealbolweevil6268 You gave both examples i will use those, finding center is easy. On odd numbers 43 3/8 for example subtract 1 to make it even leaving 42. divide by 2 = 21. for the fractions you add the numerator and the denominator together = 11 your new numerator. to get your denominator you just double your old one so 16. all together thats 21 11/16". Evens are super easy 44 5/16" ex. divide your whole number by 2. so 22 then just double your denominator so 32. that gives you 22 5/32"

@nova396

8 ай бұрын

Oh really? Take off .003 in machining, or take off .000118? Sit down.

Great to see an American with a tongue-in-cheek/sarcastic sense of humour. Keep up the good work! I'm from the UK and remember inches and feet kinda being around when I was a kid in the late 70s/early 80s, but metric was most definitely taught in schools. The weather was a bit odd, as we had temperatures in both scales, but Celsius obviously won out. We've kinda stalled at about 90% metric. We still use miles and pints. Although it'll mess with my head for a while, I wouldn't begrudge finishing the job off. Whether that will actually happen remains to be seen. Here's hoping the US joins the party!!

@Ragnar8504

6 күн бұрын

These days I'm surprised when I come across Brits born after the introduction of the metric system who still use feet and inches. There's a few more examples though, like using feet and inches to measure your height or using stone for your weight. A recent push to re-introduce imperial units post-Brexit failed spectacularly, with a staggering 98.something per cent voting for remaining metric in a poll. BTW, I don't think any country in the world has ever gone fully metric. As far as I know all plumbing threads are either American (NPT) or British (BSP/Whitworth), both of which are Imperial. While copper and plastic pipes have been metric on the continent pretty much forever, galvanised and black pipes aren't. I haven't found much evidence so far but I assume BSP spread across the continent as the British built gas works all across Europe and supplied everything, including the pipes and fittings, in the mid-19th century.

@tristandunn4628

6 күн бұрын

I'm guilty of that with height and wight. I'm making a more conscious effort to know that I'm 1m80, rather than 5' 11" and my (over)weight in kilos!

I’ve used inches and fractions almost forever in my workshop. But during my last project building a desk, I got real tired of adding fractions like 3/8 + 1/4 + 3/16 to get a total I need to make a cut. I whipped out my metric tape measure and almost never looked back. I reduced my scrapped cuts as well! 1:49

@devilsadvocate6989

8 ай бұрын

ditto, I use metric whenever possible. especially if its a project I am doing alone, for myself. I grab the metric tape every time.

@JDeWittDIY

8 ай бұрын

6/16 + 4/16 + 3/16 = 13/16 ...... if you convert like that in your head, it's trivial to add fractions on the fly... For woodworking, where the smallest fraction will be 1/16, this works great.

@MrWookie1981

8 ай бұрын

@@JDeWittDIY but think of all the pencil lead you save by not having to write the denominator all the time.

@adaslesniak

8 ай бұрын

​@@JDeWittDIYIt always helps to multiply things by some number before adding them and then divide result by 16. It's so much easier than to just add them :p

@damianjones6546

8 ай бұрын

Yeah, make things simple that's what I say. Not everyone can figure out the complicated fractions.

I bought a fully metric tape measure for work doing HVAC. The other guys give me a hard time about it but it's easier to divide 120cm into two or three parts than it is 47.2441 inches. I regularly need to center mini split heads on a wall or between windows and it saves so much time and mental effort. They told me all the tricks for finding half with standard but i dont even need them with metric. It's also a smaller scale so more ability to be accurate. I started using metric for 3d printing modeling. Fusion 360 was set default to metric so I tried it. I'll never go back now. I still use standard on new construction jobs because there's standards for stud spacing etc. but I use metric whenever I can.

@blauesKopftuch

8 ай бұрын

If you are still new to metric: decide wether to use cm or mm and stick with it, don't mix units, don't switch units otherwise you'll get confused by your own notes pretty fast. If you don't like to type in decimal points in fusion: go for mm. But note: many rulers / tape measures come in cm, unless they are from/for Australia, where they made mm the default unit by law. Mixing units is terrible, say i go out to buy a piece of wood for a friend and he writes down 20 x 100 x 200. Thickness is obviously 20mm (because 20cm would be too much), but is it 100 mm x 200 cm or 100 cm x 200 cm or 100 cm x 200 mm? All three are reasonable sizes.

@ingo_8628

8 ай бұрын

@@blauesKopftuch The rule says, if no units are written, the numbers mean mm, if somebody means cm but doesnt write that and sends someone else with that sheet of paper to a store he is just an idiot. If anything is unclear, why dont you just make phonecall?

@crusaderanimation6967

8 ай бұрын

Calling unit system only you and few other countries uses standsrd is so American.

@pacman10182

8 ай бұрын

what tape measure has decimal inch?

@erickleinwolterink3524

8 ай бұрын

You mean "47 and a quarter, shy." Right?

I personally find that I use both systems almost equally. While the metric does conversions better, the metric system has 1 issue. Which is dividing by 3. The beauty of the imerial system for measuring construction distances is due to the fact that its a system based on 12. 12 can be divided by 2, 3, and 6. This is a lot more useful when doing generalized layout for things like equially distancing things as you have more units of measurements to work with. While most people are used to dividing by 10, I honestly think a system based on 12 is actually a lot more versitile when you fully commit to it. But that being said, the metric system is far better for projects that are under a few inches. The metric system is better and going small through conversions, but sometimes if I want to work referentially halving continuously is better for eyeballing. While I may have defended the imerial system more than mentioning how good the metric system is, I will point out that there is a video above already mentioning that and simply basing things off of 10 is just really useful. But so is basing things on 12. Why force yourself to use 1 system when you can seamlessly take advantage of both system's advantages.

@timexyemerald6290

3 ай бұрын

Well. Thats only one advantage. The advantages of using Metric is clearly far more than using Imperial

@zackeryhardy9504

3 ай бұрын

@@timexyemerald6290 Why not use both? It's like a rich guy choosing between a truck and a mini van. Just use both for the task they each excel at.

@gtvgranberg

7 күн бұрын

Make your thing 12cm, problem solved! Or 24 or 48 cm or mm or m. Any 12 multiple

I'm full blood Texan and I only use the metric system. Yes I learned fractions and I can use them somewhat now days, however, I have a metric tape measure. All woodworking projects I've done in the past 15 years have all been in metric. It just makes sense because the 10-base system is so simple and since we already use it in our money system why not use it in everything. My only difficulty in metrics is distance by Kilometers only because I've never used it. I can imagine/visualize a mile but not yet a kilometer. Thanks for the video.

As a Canadian who grew up using Imperial measurements and then had to learn to convert to Metric, it wasn't hard to do. I use both systems interchangeably.

@MegaNardman

8 ай бұрын

Yes, but you have to remember that the (median)average American isn't that smart, and half of the rest are dumber than that.

@yfelwulf

8 ай бұрын

Same here I was at school when Australia changed

@paulwujek5208

8 ай бұрын

There is always the issue of things that were made with the imperial system are easier to deal with in that system. My house was built in 1958 which means that all rooms, doorways and other features are sized using whole imperial numbers - when dealing with that it is easier to stay in imperial than to convert to metric. I have eight foot ceilings, 28 inch wide doors, 3 foot wide staircases, etc.

@Quince828

8 ай бұрын

And yet the grocers still package and advertise meat in pounds instead of 454 g. And 20 degrees still seems colder than 61

@mxh5647

8 ай бұрын

Although plywood measurements can be a bit of a pain. Isn't 3/4" ply slightly undersized?

I love that I, as a Swedish bought up in the metric system, took almost the entire video to notice that he has a Sjöberg workbench. Sjöberg is an incredible swedish name, and the bench is most probably also very metric. That beein said, we sometimes actually use inches for our lumber. So I guess the imperial to inch conversion goes both ways =D

@nilsdock

8 ай бұрын

inches in Swedish lumber is usually slur for the things that are actually measures in mm. the Swedish 2 by 3 is actually 45x70 mm. what I mean to say is that inches exists in the language but not in the measurements.

@sm3ttz

8 ай бұрын

Don't forget that not many years ago we bought 4 inch nails.. Now they are 100mm nails

@drops2cents260

8 ай бұрын

@@sm3ttz Well, as an Austrian, I always bought nails in millimeter lengths - except for Nine Inch Nails, of course... 🙂

@douglashaag1127

8 ай бұрын

Good to learn that you are "a Swedish" and not "a Swede". That will be valuable information so I don't embarrass myself if I meet someone from Sweden. I guess that means someone from your neighboring country would be a "Danish" and not a "Dane".

@leifclaesson2470

8 ай бұрын

Don't trust him on that @@douglashaag1127 :). I am very much Swedish myself, but I'm also a Swede. ;)

In the U.K. we have rulers that have imperial and metric on them. The speed limits are in MPH and so are the speedos. You can buy a sheet of 8 x 4 but it is 2440 x1220, at18mm thick it is 3/4". We have a mixed up system 😁

Yes, I will absolutely be switching to the metric system!

This was the most well written content you ever produced. Straight up, 6 minutes of giggling. I guess base 60 won’t be going anywhere anytime soon.

@sylviam6535

8 ай бұрын

The French wanted to make everything based on 100 (time, angles), but it did not take.

@AndersJackson

8 ай бұрын

​@@sylviam653510 day week was not approved by workers. Except priests, who had tre more free day between preaching. 😂

@konstantinbodin9936

8 ай бұрын

You call it that way but yet, you divide by 10. To got 60system nomber you need 51 diferent symbol after nomber 9. Same in hexadecimal, no 10 is A, so you are stil in decad system because you count 0,1,2,3,4,5,6,7,8,9, 10(and that is decad system because you repeat 0 from the beginingand 1 is moved just one place to represent it) and first nomber in second "stage" (to simplefie litle) is nomber from begining 0, and next is 1... and ading representation of "stage" its 11. So we all operate in decad, computers do in binary 0,1... nomber 10 is 1010 nine is 1001...

@SomeKidsAtHomes

8 ай бұрын

because he litteraly copied the "Why I will NEVER use the Metric System" video

I'm from the Netherlands, and If it wasn't for wheels, TV's, PC monitors and drivebays I'd probably never ever knew inches were a thing. It's kind of weird that we got so accustomed to the imperial system for certain devices. It was probably more convenient to stick with them as conversion would lead to even weirder numbers and more confusion.

@wishingb5859

7 ай бұрын

Yes, nowadays there is no reason to do any conversions. Type how many inches is in a meter and Google or Siri or Bixby or Alexis answers - you don't even have to think at all.

@nerdzone

7 ай бұрын

@@wishingb5859 Yeah, I wonder how NASA did not figure that out in 1999. :)

I think the real issue is if speed limit signs and highway exits are converted to metric, since those may be the ones that affect our lives with the greatest impact.

Also when temperatures are expressed in Fahrenheit, for me being used to the Celsius, it seems weird when they say it's 80 degrees outside, we have 80 degrees celsius in the saunas.

Up here in Canada we officially use metric, but you will still find a lot of imperial units around as well. Monitors and and Tv screens are measured in inches, and you will very rarely find someone who will give their height in CM, almost always feet and inches. The weirdest thing to me though is wheel/tire sizes. Wheels are measured in inches, so tire sizes will be partially metric, and partially imperial, with a ratio of one of them thrown in there for good measure. 215/60R16 means the tire is 215mm wide, with a sidewall that is 60% of 215mm, and it fits on a wheel that is 16 inches in diameter and about 6.5 inches wide, but then the offset of the wheel is MM again. It makes perfect sense if you don't think about it at all. 😂

@captainunderpants936

8 ай бұрын

Same in SA

@OnlyOnePlaylist

7 ай бұрын

Haha the tire thing is also in Europe. I don't own a car but the same issue occurs for bicycles, such a pain

@GolfWangMedia-incorporated

7 ай бұрын

Same as UK but we use also use imperial for the roads and car speed

@emgriffiths1861

7 ай бұрын

Yeah a bit of a mess, I had to fill out an application for a licence and it asked for my height and I filled it in, they sent it back as I didn't specify feet inches or meter/cm I wonder if they thought I was over 5 meters tall ?

@jamesnasmith984

7 ай бұрын

Dividing by 2 (repeatedly) rather than by 10 may be a matter of taste but the endlessly changing intervals between adjacent denominations of magnitude is a royal pain to memorize; 12 in/ ft, 3 ft/yard, 1760 yd/mile. Worse; US quarts and gallons are smaller than Imperial versions.

The irony is the US already has switched to metric, we did a long time ago. The formal definition of an inch is EXACTLY 2.54 cm. In other words, the inch is already defined in terms of the metric system. And the same applies for all the "English" units we use. We're just running the metric system with a texture pack over top of it.

@StumpyNubs

8 ай бұрын

"The irony is the US already has switched to metric, we did a long time ago...." - Yes, that's what this video is all about :)

@TanyaLairdCivil

8 ай бұрын

@@StumpyNubs True! I just find it interesting that even the units that are ostensibly still Imperial units are metric if you actually look up the precise definition of them.

@douglasclerk2764

8 ай бұрын

I spent my early schooling using both the metric and the imperial system. I have been teaching physics since 1977 and find the metric (SI) system way easier. However when doing woodwork, every now & then I find myself thinking in inches - Imperial seems somehow to lend itself well to woodworking.

@bobalman

8 ай бұрын

@@douglasclerk2764 Yep, good old 2x4s. You know those boards 3.5"x1.5"...

@Emily_M81

8 ай бұрын

so you could say we're using the metric system with extra steps.

Awesome videos as alsways. Love the humour. I am a French Quebec'er from montreal. Learnt fractions from my father watching him in the work shop as a kid. Still today i have issues with that system. Much prefer metric. I still however make an effort with imperial measurement. Try to keep it fresh in the head in case i work with someone who has metric fobia. Hehe 😮😊

Metric was introduced into Britain in 1965 when I was 10. Up to then, I had only been exposed to the Imperial system. Strange, even though I've used metric throughout my professional career, for everyday stuff, like imagining a person's height or weight, I have to convert it back in my head to feet and inches or stone and pounds for it to have a conceptual meaning. Flaxen Saxon.

As a Aussie with an American mother I grew up confused as hell with measurements, on top of that I often failed my spelling tests because I leave the U out of color...I mean colour. Now I fix metric Airbus aircraft in the morning and Imperial Boeing's in the afternoon. 🙄🇦🇺

@houtdraaien7103

2 ай бұрын

Now it is clear why the Boeing's are falling apart

As an engineer, I love this 😂

@DuffyHomoHabilis

8 ай бұрын

Absolutely!! Engineering calcs are SO much easier in metric!!!!!

@SteelheadTed

8 ай бұрын

As a structural engineer I hate it. Whenever performing a calculation it is imperative to have a gut check on whether it is a reasonable answer. If I’m expecting an answer in a certain range of pounds, I know what that means. The standard unit system is my first language. It would take years to attain that same gut feel in Newtons. I would always be converting back to standard units. An engineers gut feel for an answer is critical.

@pashahart8698

8 ай бұрын

Explains why there are so many bridge issues engineer......

@conrat2000

8 ай бұрын

I think @SteelheadTed got it right for a lot of us. I took have a hard time visualizing metric units and am comfortable with imperial units. I end up converting to double check myself.

@Shin_Lona

8 ай бұрын

Yeah, but I already use metric for engineer related functions... It's everything else that I'm worried about. Do you really wanna use Celsius? You lose resolution when making important decisions like if it's going to be warm enough to wear shorts or not. KPH? Think about the speeding tickets. Officer: "Do you have any idea how fast you were going?" Me: "No, I do not."

I'm in Canada. I use imperial for wood working and some things, and metric for other things. The right tool for the job. The benefit of a 12 based system is large unjts are divisible by 2, 3, 4, 8, etc. A 4 x 8' sheet of plywood is divisible in so many sizes with even numbers. Also, we only work with easy numbers under 100, usually. Also, fractions are trivially easy. it's all done in your head on the spot.

Hooray! I'm glad you doing it, it's a really step forward.

I used to hate the metric system. Mainly because their odd sizes didn't fit correctly in the imperial tools I had at the time. But as I aged and started working on industrial machines for overseas, where everything on them is metric, I found it's a far easier method and can quickly be learned by anyone even a child. There are times now even at home where I'll prefer to use the metric system for my work around the house.

I’m retired now, but I still remember the horror of starting my first job and finding out everything was done in ‘imperial’ units. Virtually my entire education (in Canada) was done in metric, and by the time I finished university all day to day measurements were in metric units. However, all my company’s customers were US, and all requirements were in imperial units, well that is to say US measurements as they were a bit different than the British measurements we used to use - just to make it even more messed up. Now that I am retired and dabbling in a bit of woodworking, I tend to stay with the US units as that’s what all the tools are. However, I am seriously considering just going all metric for future projects, I think once I get started, I will never look back. And in some ways the USA is fully metric. A inch is defined as exactly 2.54 cm and a pound is exactly 0.45359237 kg. All non metric measurements are actually defined precisely to their metric counter part, and it is the metric measurement that is related to some fundamental physical constant.

@thothtahuti5509

8 ай бұрын

Well said, sir :)

@ChrisSudlik

8 ай бұрын

A screw called out in a design with a British thread type threw off the work cells at one of my past jobs brutally, given that even the British mostly stopped using them ages ago.

@timosdinkydetailing

8 ай бұрын

Using Imperial measure is the best way to do construction framing, that's why you do it. You can do a thought experiment on how you would design a metric plywood size and measure out evenly spaced joists to match it. Imperial plywood is eight feet tall. Same as the floor to ceiling hight. The four foot wide sheet can also be framed perfectly with either 12", 16", or 24" spacing. I think, if there wasn't an imperial measurement system, there would be no frame houses at all. Like in Europe.

@actionjksn

8 ай бұрын

I have never bought wood that was in metric dimensions. Using the metric system on wood that is cut in imperial dimensions doesn't make any sense to me.

@russellhorsefield9199

8 ай бұрын

To this day I still can not understand British Withworth but I would like to learn before I pass away.

Good point. I have been using metric in my shop for years and find it much easier when building projects and cutting material to size. Why is this you ask? well, many don't realize that the materials we have been using for years are actually produced in metric sizes. Frustrated me when I was doing all I could to get my projects right and doing the math on a close enough scale that they would always come up not quite right in the end. I have many metric tools in my shop that I use on my channel as well. Seriously considering the full conversion in my shop for good. Thanks again. Awesome video.

I bought a brand new motorcycle last year. It's made by Harley-Davidson... and it shows the displacement in CC's. As someone who spends a lot of time making technical drawings, I really wish we could switch to metric.

"10 dollars in the average Americans saving account", outstanding move!

It's funny because here in Germany we always use the metric system but on our rulers we also had the inches (we call it Zoll which translates customs) . It was very confusing for us some of us back then. But we also got in touch with it back then.

@flybywire5866

8 ай бұрын

While we generally use metric in germany, things like plumbing or car rims or tv screens use inches.

@Wildschwien

8 ай бұрын

​@@flybywire5866Selling screens only it imperial however is not legal. Same with using PS or horsepowers for the power of sth. Imperial should be finally replaced everywhere.

@vomKuckucksfelsen

8 ай бұрын

The german word "Zoll" was written "Zol" back in the Days and was always a unit of measurement. "Zoll" also means "customs" but that comes from the latin word "telonium" which describes the Place you had to pay customs to continue your journey.

@shadowmancy9183

8 ай бұрын

@@Wildschwien I have no idea how PS works for horsepower- I know 50hp is a nice amount on a bike, but is 50PS more or less, and by how much? Same with torque- 50ft-lbs is enough for a smaller bike, but is 50Nm more or less, and by how much? There's just not a sense of scale when it comes to the practical things.

@Wildschwien

8 ай бұрын

@@shadowmancy9183 PS is Pferdestärke (horsepower) in Germany. However this is not the same as the unit hp I think. We don't use lps as well.

i live in Scotland, i have grown up to use both inches and millimeters. done a lot of renovation work to old houses that have inches for the timber measurements, you ask for timber in inches but different to USA (UK is 4x2 but USA 2x4) but they do have the mm size on hand for timber if you need it. i like how the UK uses MPH, it feels faster as takes more effort to get to a speed where as KPH just turns into daft numbers (like for super cars, 200mph is 322kph. going over 300 is silly to me unless its in MPH then its like, wow, thats shifting). use mm and inches but keep MPH is what i would recommend lol

As my career involved machining that became a mixture of inch and metric. The double dials on some manual machines offered that option. The CNC machines that's a parameter change. I have know the metric system well since the mid 80's as this all filtered in. I still use my inch micrometer as all these tools I own are in inches, and the newer ones are selectable. Wood worker from High school I like your videos very informing and thanks for sharing. Cheers!

I believe that in the 1960s there was a big push in the USA to switch the metric system which was quashed by the Society of Automotive Engineers. I think that is fascinating since, as you pointed out, American cars are now mostly metric.

@Raggzzaug11

8 ай бұрын

Wish we had,I would't need two tool boxes.

@bretsk2500

8 ай бұрын

The last fastener I saw on an American vehicle was my 1988 chevy pickup... the only SAE bolts left that I know of are the 3/8-16 bolts in a side terminal battery.

@tookitogo

8 ай бұрын

I very much doubt the resistance was at the behest of the SAE, since American automakers are one of the few industries in USA to fairly thoroughly switch to metric.

@Chris-hx3om

8 ай бұрын

@@tookitogo I really wish they had! I had a boat shop in the 1990's. New Mercury (and OMC) outboards with legs and gearboxes built in 'murica were imperial and the powerheads (built in Japan) were metric. BLOODY ANNOYING!

@carloscollomps1552

8 ай бұрын

It's annoying how some american cars have mixed imperial/metric fasteners/bolts, like my 1988 S-10.

Funnily enough, I was born, raised and educated in the metric system (I am from France), and yet, when I work in my workshop, I primarily used the imperial system. I found the fractions fun to use... That said, who cares what system you use as long as you have fun building stuff.

@saxus

8 ай бұрын

Oh those fraction thing drives me crazy.

@BoraHorzaGobuchul

8 ай бұрын

As the Russian saying goes, "monsieur is a connoisseur of perversion" (used as a praise of sorts)

@TruFrag

8 ай бұрын

It does matter when it comes to compatibility between projects and sometimes even within the current project its self.

@mattsutube

8 ай бұрын

It's only fun when you're dealing with the easy conversions of the metric system. I'm Done struggling with Imperial.

@yfelwulf

8 ай бұрын

SI Metric is Universal (French Metric is as you say different) all the units are related 1mm x10 = 1 cm x 100 = 1 meter. 1 cubic cm of water = 1 millilitre that weighs 1 gram x 1000 = 1 liter then 1000 liters equals 1 metric ton or 2200 lb. America is making its self irrelevant by maintaining a system that no one else uses anymore. I was at school when Australia went from British Imperial to Metric. Remember US and UK are not compatible being different scales. ie 1 UK gallon us 4.5 liters one US Gallon is 3.9 liters even the inch is a different scale.

Temperature in F. There are 180 increments between freezing and boiling. "Short" measurements in imperial - easier to divide into halves, quarters, eight's etc. Try to measure a quarter of a cm. Angles will always be some increment of 360... or 60 minutes of a degree... or 60 seconds of a minute. Planes and ocean going vessels still use knots - nautical mile, traditionally 1/60 of a degree of latitude at the equator (now codified as 1852 meters (just over 6000 feet)). If you really want to be obtuse, give your measurements in the FFF system - fortnight, furlong, firkin, or in terms of Plank dimensions (length - 1.616255(18)×10^−35 m), mass 2.176434(24)×10^−8 kg, time - 5.391247(60)×10^−44 s and temp - 1.416784(16)×10^32 K) Not all metric units are great. Not all imperial ones are bad. There are more obtuse ones in common use than you realize. So long as you're able to effectively communicate your intent with your audience - that's what really matters.

The best measure system is the one you know well. But yes, metric is an improvement. The issue I think is that orders of magnitude don't always translate into useful units.

The inch was re-sized and defined as 2.54cm very early in the 20th century. Although, I think it was "officially" set as such in 1959. For the most part, all the precision work in the industrial age has been on an inch that is really metric in disguise

@thomasherrin6798

8 ай бұрын

All the precision work in the Industrial age was done by Imperial fractions!?!

@mRw0oK

7 ай бұрын

lol , you wanted to say: precision work was mostly done by metric, especially in the last 100 years almost exlusively :D imagine bulding a CPU with imperial :D

@kjelllindberg6987

8 күн бұрын

That was due to the difference between the US customary units INCH and the imperial INCH, then both systems agreed on a INCH being exactly 25.4mm long...

Went totally metric when about 2 years ago when I finally changed to Celsius because I did a total immersion language so I could feel comfortable in my second language. The hardest part of that was actually the fact that I needed to convert the speed and distances for when I described a road trip because I was so ueed to giving location as being the amount of time it took to get there not taking into account that I was telling that to someone was using the Autobahn which made something like its an hour away from Chicago a meaningless statement.😅

@aixtom979

8 ай бұрын

I'm just running in to the "X hours away" situation while planning a trip to Japan next year, where "an hour away" (while considering daytrips from my hotel) can be anything from 25km to 300km. ;-)

@davidsilvercreek8541

7 ай бұрын

Celsius is not metric and is half as accurate as Fahrenheit, who cares when water freezes and boils at SEA LEVEL... Next, time is divided by 12....

@mRw0oK

7 ай бұрын

@@davidsilvercreek8541 bro you can add decimals to celsius and it will be the same accuracy... accuracy is dependend of the Device you are using not the numbers that come out... you can even make you're own scale if you want... but you cant change the device and its accuracy to measure stuff

@davidsilvercreek8541

7 ай бұрын

@@mRw0oKIf you use a big enough sling shot you can make a pig fly...

@mRw0oK

7 ай бұрын

@@davidsilvercreek8541 you can throw sayings around as much as you like, in the end you cant argue with logic. But you wont understand because you dont even understand the conept of logic

I'm 54 and use both systems. I think it's great to be able to use both in some circumstances. If measuring something I can use whichever is easiest at the time. If it's dead on inches and odd numbers in metric then probably use inches and some times easier to divide. It's not difficult to use both. It's just difficult relating certain numbers in metric. for instance my weight. I can judge peoples sizes by stones and not kilos. That's just because not used to using it like that. Over time new generations won't have the same problem but still think people need to learn fractions.

I'm engineer-trained and have been using both SU and Imperial measurements most of my life, and I'm in my 60s now. Both are easy, although sometimes switching mid-project might require a calculator. While many years ago a calculator was uncommon in most shops, now most folks have cell phones that can run unit conversion or calculator apps. It takes seconds to use a common conversion tool to get an accurate measurement. I've got a garage full of both metric and imperial tools, and a woodshop with more imperial and less metric tools. Mostly because most woodworking shops carry imperial stuff in the US. Someday our conversion to metric will be complete, I'm sure, but the cost of changing everything over is huge and there will be legacy needs to address for many decades. Until then, any decent conversion app will suffice.

Already metric and loving it! Love how it's so transferable through the other units, e.g. 10cm cube is a litre of water. Which is a kg. Oh, and science uses it, SI

I already have gone metric as an American. I’ve been criticized by some people in public for using millimeters and centimeters when describing the length of something’s.

@JBG1968

8 күн бұрын

Because nobody know what you’re talking about

@ellenorbjornsdottir1166

5 күн бұрын

@@JBG1968 [citation needed]

@boredymcboredface8624

Күн бұрын

Keep fighting the good fight buddy

Simple conversion from C to F I learned in the 70's. Our thermometers in our helicopters were in Celsius, so we just used double the C, subtract 10 % and add 32 to get F. It was and is simple to do in your head without straining your brain. It is exactly the same computation as the "real" formula, 9/5 C + 32 = F

@itskarl7575

2 ай бұрын

You... just changed my life.

@vaalrus

24 күн бұрын

The widely used Canadian cheat was the straighforward “Double it and add 30”… some inaccuracy creeps in, but for human scale day to day, and it was close enough, and for when watching American TV. :)

@christopherbedford9897

18 күн бұрын

The problem with that conversion - at least, the doing it in your head part - is that if you're not naturally a numbers person it's hella difficult (ok, no, i't impossible) to remember if you add or subtract the 32 and if you do it before or after multiplying by 9*2/10 or 10/9/2. If you want to be sure if you got it right, pull out your phone.

@vaalrus

18 күн бұрын

@@christopherbedford9897 Millions of Canadians born before our switch-over would disagree… especially if you’re going with the slightly less precise “Double it and add 30” approximation of the same algorithm. Then again, we also spent a decade putting stickers on our old speedometers

@christopherbedford9897

18 күн бұрын

@@vaalrus In South Arica, we did that conversion in the early 70s. For the first while (it might also have been two decades, but maybe closer to one) we also did that stickers on the speedo thing 😁 and were allowed to buy rulers, measuring tapes etc with both inches and metric measurements on them. But then in the draconian tradition of the apartheid regime, the sale of anything with any imperial measurements (or items stated in imperial measure, like fl oz on cans of soup or inches in the size of a TV set) were banned outright for a long time - probably two or three decades - and we adjusted. We have now relaxed to allow the use of any measurement you like but we don't care, the only place you'll see anything other than metric measurements is in computer screen sizes and no-one - not even old people who used only imperial for as long as they could - has a clue how hot 95°F or how far 150 miles is without punching it into a conversion calculator.

Im a product designer and can use both inches and mm for length to design easily. Go between, use fraction on the inch stuff I know all the decimals to the 16th off my head. But aside from psi I’m pretty much using all other units or combinations of units in metric

Here in Australia the older generation like my father, were brought up on the imperial system. So I know how hard it is to change from something that was taught from a young age. But it does make me laugh when my dad has to add up 5ft 9 53/64th in + 3ft 7/16th in + 9ft 3/32 in , and all I have to do is 1774mm + 926mm +2822mm 🙂

@Chris-hx3om

8 ай бұрын

I grew up with imperial, and had to change to metric. Best move EVER! How much does 1 litre of water weigh? 1 kilogram. It's just so much easier than trying to convert volume of water to mass, then dividing it by the number you first thought of... And aircraft, filled up in pounds of fuel. You've got to be shitting me! (and yes, I'm fully aware of why they use pounds!)

@oleksandrbespalov9713

8 ай бұрын

As the author of the video said, you're just afraid of fractions 😅

@Chris-hx3om

8 ай бұрын

@@oleksandrbespalov9713 Americans are SO lazy that not only do they refuse to learn the metric system, they can't even see why it's so much better. Which does surprise me in a way. Don't you lazy people see that by using metric you can be even lazier? Go metric, no more fractions! (BTW, fractions don't worry me in the slightest. And I do know that the lowest common denominator for americans not going to metric is that they are stupid.)

@nevillesevicke-jones1227

8 ай бұрын

And.... are you using short (US) tons or long tons? And gallons...( remember them?)...US gall==3.8 litres.. a standard gallon 4.55 l

@dannynysus

8 ай бұрын

🙀 oh noes, pwease wescue me fwom da scawy fwactions 😭

Weirdly enough, the rigid but foldable device for measuring, usually made from wood, is called a "Zollstock" in German, literally "inch stick". A "Zoll" was a cut off piece of wood with a thickness of about 2 thumbs, whereas 12 Zoll made 1 Fuß, or foot. But then a Zoll varied between 2.5 cm in Hesse and 3.7662 cm in Prussia, with Baden and Switzerland (where 10 Zoll made a Fuß) somewhere in between. We also had miles, varying from 7500 to 9000 m, or between 12000 and 24000 Fuß in other places. All in all, the metric system is a good thing...

@zbnmth

8 ай бұрын

Dutch has the same, "duimstok" (thumb stick). Except it's becoming an archaïc word (since it's becoming an unused tool) and we'd use a "rolmaat" (rolling measure) way more often.

@SimplySketchyXbox

8 ай бұрын

The French used to define a foot as the literal measurement from the Kings foot.

@FabioCapela

8 ай бұрын

And this shows why standardization was truly needed. Even before the SI came along, what we now know as imperial units were only ever used in the British Empire; other places had different measurements that, to make things more confusing, often shared the same names but not the same measurements.

@durandalgmx7633

8 ай бұрын

@@zbnmth duimstok and rolmaat arte different things. Duimstok is rigid and still quite handy.

@durandalgmx7633

8 ай бұрын

@@lurch789no it's not. It's the same. your (?) imperial system is just one of the many and evolving imperial systems that are/were out there. That is the whole point. There was no standard, until Napoleon and his metric came along and made it all standardised and simpler. Today the US Imperial system is officially defined by the metric system.

I use metric in my woodworking projects and anytime now I need to measure things around the house. It’s so much easier to add and subtract dimensions. It has been helpful to use a tape measure that has both imperial and millimeter on the tape to get accustomed to metric or make conversions on the fly.

I use millimeter tools to measure and cut my home improvement projects, it really is simpler than dealing with power of two fractions and inches. --- not to mention converting between inches, fractions, decimal inches, inches and feet, decimal feet, etc. might as well just convert to mm and get on with it. I only use inches where something is supposed to come out even, for example 16" on center studs or a 4x8 sheet of plywood.

In South Africa we changed from imperial to metric in the mid 1960. I use both. Although metric is easier for calculating engineering subjects. My biggest downfall is I love to bake bread. Blows my brain when the recipes use cups , ounces , lbs etc. so much easier when it’s all in grams , litres and millilitres. 👍👍. We enjoy your videos.

@seanseoltoir

8 ай бұрын

And if you look at it a bit closer, you need to realize that there are US cups (fluid=236.5882365 ml, dry=275.305235679 ml), Imperial cups (284.130625 ml), metric cups (250 ml), Canadian cups (227.3045 ml), etc... And there is also the issue that US cups are further divided into dry cups or fluid cups, which most people don't realize the difference and end up using the wrong measuring device for the type of cup that the recipe is requiring... Then again, you have no guarantee that the original creator of the recipe used the right measuring device either... And then there is the FDA "nutritional cup"... Might as well say, "a smidgen of this and a dash of that" for the recipe... :(

@bskbishop

8 ай бұрын

Metric recipes tend to be measured by weight, and imperial by volume. For ANY kind of bread or pastry, the ratios are critical to get right, and measuring by weight is SO much easier and more accurate. I definitely prefer metric for bread, and other baked goods.

@dappermuis5002

8 ай бұрын

I was born 16 years after the change over. Pretty much everything I do is in Metric except baking. I agree Teaspoons, and cups are so much easier for me, though I use metric on things like the butter as it is easier to carve off blocks knowing how much is needed without having to weigh the darn stuff. I grew up using cups and spoons, also most recipes are from old cook books, WAY older than me. Also when dyslexic and one gets things wrong on a calculator, having to whip out a scale just to measure what would have been 4 teaspoons of something in the old way of measuring is just rediculous. If using a scoop, when you figure it out, you still have to convert back to how many scoops needed that are measured in teaspoons anyway!

@trystdodge6177

8 ай бұрын

And look at south Africa now. Great reason to NEVER entertain the idea of switching to metric.

@DigiLab360

8 ай бұрын

The metric system in South Africa has been tremendously useful for measuring the level of corruption in the government.

In the early 1960's there was a serious effort to convert the U.S. to the metric system. I remember being in grade school during that time and was educated in the metric system for about 2 years. Then they abruptly stopped. Well, my later education as an engineer; physics and chemistry classes were all metric. It's like growing up learning 2 different languages at home. As an old man, I think and function equally well with either system............

@hamptonwoodturnings

8 ай бұрын

I remember that too. I believe the powers at be during that time found it was too difficult to switch over using a bunch of grade school kids to do it, 😅

@noquedaniuno

8 ай бұрын

do to the vicinity, we use kind of a hybrid system here(Mexico). You get the chance to order materials(plywood, PVC pipe, etc) in Imperial but you make all your measurements in metric. To this day i still see some mechanics using SAE tools on recent cars... I stopped taking my car to those shops and had to learn some mechanical skills on the way, but seeing someone beat a 1/2" socket in a 13mm nut was a really hard pill to swallow -_-

@haqvor

8 ай бұрын

That seem to coincide with the imperial system being redefined and based on the metric system in 1959. For example the definition of an inch is exactly 25.4 mm, and in turn the metric (or to be more precise the SI system) is based on measurements of physical phenomenon that can be very precisely measured.

@kwilliams2239

8 ай бұрын

@@haqvor No, it really has nothing to do with the rationalization of the imperial system. Politicians in the '60s thought they "knew more" than the mere riffraff and decided to push it down their throats. The people rejected it, soundly, so it went away. Mostly. Liquids are still sold in metric units but that's about all. People in the STEM fields use metric because it's, well, required. A lot of needed units don't exist in the FPS system and conversions are much more important. For 99% of the people, FPS works just fine. If our betters are going to try to force it again, expect the same results. A lot of people will be really pissed. I don't much care, except that I have a *lot* of imperial tools.

@stephendurnan3609

8 ай бұрын

In the early 70's that called it 'think metric'.

I'm in Canada and still do home renovations in imperial units. Drywall and plywood are 4x8 foot panels though the thickness is now mm. Studs are on 16 or 24 inch centres, tiles are in inches... I tried going metric but found it more difficult given the standards in construction that even 50 years after going metric are still imperial. For woodworking I use and prefer metric. I could tell I made the switch when I started converting to metric to visualize units. If someone says something is a foot I think "about 30 cm" now converting to metric in my head.

I made the switch to metric for all 'fine woodworking' projects from the start. All of my tapes, squares and straight edges are metric or dual measurement. I added a Wixey digital rule / gauge on my table saws and planer and keep a nice Mitutoyo caliper at the ready. I still reference approximates in imperial and use it for larger projects like cabinets or home repair just because most appliance schematics and accessories use imperial, but my life is loads easier using metric.

@jeffreyoneill6439

8 ай бұрын

NO,NO,NO!, That’s all, but NO.

Here in the UK we use both interchangeably, although I think imperial is becoming less common in the younger generation. I'll use imperial for my height, weight, distances and speed, but metric for almost everything else. I like the ease of halving, say, 4 & 3/8 inches by doubling the denominator, but for any precise measurement I'm just much more comfortable in mm

@sygad1

8 ай бұрын

exactly the same, if we could just shake those last few

@dansmif

8 ай бұрын

As a child of the 80s in Scotland, we only learned distances in metric, which is weird because we still use miles on our road signs. I just wish we'd hurry up and get rid of imperial measurements - we should have done it decades ago.

@newportshapwick

8 ай бұрын

I'm happy using both at the same time. Carpets in the UK are often measured in feet in width, but metric in length! I tend to swap from one to the other depending on what I'm doing and which gives me the results in the quickest way to work out.

@louisc.gasper7588

8 ай бұрын

I understand you still price race horses in Guineas.

@jaapgoddijn

8 ай бұрын

@@newportshapwick The carpets measures are hilarious! 😂 Though I can understand how such a thing evolves in time.

I use both. I design parts in the computer with MMS. I brew beer with grams of ingredients, but gallons of water. I adhere to the road laws in MPH. I did a project (construction) with some Aussies. Their blue prints are all metric (whether building something the size of a thimble, or the size of a stadium)...

Metric units is not about converting lengths to lengths. It is about not needing a constant when you calculate formulae, such as multiplying the acceleration in m/s² with the mass kg to get the kinetic energy in J. If you are a non-metric but smart citizen and need to calculate things, you convert all measurements to metric units before calculating stuff, and then back to old imperial, or whatever.

Here in Puerto Rico: we sell gasoline (petrol) in liters, yet we sell milk and motor oil in quart, half gallon or gallon jugs (yet we ask for a liter of milk); speed is measured in miles per hour, yet distance is measured in kilometers and mileage is calculated in miles per gallon; cloth for sewing is sold by the yard; lumber is sold by inches and feet. In cooking: we use the 'spoon and cup' system. This is a partial list.

@LRM12o8

Ай бұрын

So, of you go 55 mph on the highway and your destination is 70 km away, you can't easily estimate how long it'll take? Sounds very cumbersome!

@merlin9702

Ай бұрын

@@LRM12o8 Converting the speeds is pretty easy though if you don't need exact results. 50 km/h ≈ 30 mph 100 km/h ≈ 60 mph 160 km/h ≈ 100 mph 200 km/h ≈ 125 mph I use these values to make a guess to convert mph to km/h as someone who only uses km/h exclusively and watches American youtube and sometimes needs to know how fast x mph are. So I'd guess 55mph are a bit under 100 km/h, let's say 90 km/h and after checking online the exact conversion is 88.51392 km/h, so pretty close.

@SamBowker

24 күн бұрын

@@merlin9702 All that mental arithmetic will keep your brain active and ward off Alzheimer's disease. Its probably a cunning government plan. LOL

@markthomas919

23 күн бұрын

Sounds like a real bodge up!

@seannorgren5752

22 күн бұрын

I'm so confused...

I grew up in Singapore where we uses Metric. Watching and reading imperial is just about another measuring systems. Hence no big deal. Now a days smart phone are so convenient and conversion is just a click away. What I felt really challenging is baking, where Cups and spoons were used rather than weight and volume which is much easier to follow. This is personal. 😊

@RoryIsNotACabbage

8 ай бұрын

A cup is also different depending on who you ask Volumetric measurements need to go

@pacman10182

8 ай бұрын

@@RoryIsNotACabbage I'd never get any cooking if I had to weigh everything

@kennith.nielsen

8 ай бұрын

Old recipes actually use cups and spoons in Denmark. The problem is that they don't all have the same size. Son of you have a big cup and a small spoon, you might mess it up if you're not an experienced baker. Using grams, centiliters and deciliters (one tenth of a liter) you get the same result every time.

@alexhajnal107

8 ай бұрын

@@RoryIsNotACabbage When dealing with powders such as flour the volume for a given mass changes depending on how tightly it's packed. For this reason professional bakers always measure by weight, never by volume. Also IIRC, US bakers use metric, not imperial.

@Antinous99

8 ай бұрын

Another advantage of using metric (weight) instead of cups and spoons is that there are less dishes to wash. Put one bowl on the scale and add the ingredients.

The only unit I've ever had any trouble with is celsius. All other units of measurement in any system are things I visualize, but temperature is a thing that I feel. Hard to get away from fahrenheit for that reason. I have no doubt that I could do it though, it would just take time to get used to.

UK here. I use both systems, depending on which is closest and which is easier to remember at the time.

For me, this was really a one-time event. I made the decision when I started to get into CAD modeling back in the mid-00s, to standardize on millimeters for everything, car-size and beyond. Everything else just happened naturally from there -- calipers set to metric, found some decent tape measures and other tools with metric or dual scales, and ultimately I was pretty surprised by how painless it was. Metric fasteners are easy to design with, you can work mostly in whole numbers, a lot less fuss to make the change than I was expecting. Haven't looked back.

@ITubetc

8 ай бұрын

I was going to write almost the same story. I'm happy to say I'm ambidextrous but mostly prefer metric. I still buy 2x4 lumber and 4x8 sheets of plywood not 50x200 or 1219.2mm X 2438.4mm plywood sheets.

@arthurmoore9488

8 ай бұрын

Hardest part for me is finding metric tools at the local big box stores. Plus, pipe fittings are all NPT, and a large amount of equipment uses Imperial fasteners.

@h.mandelene3279

8 ай бұрын

Face it - the REAL reason US car makers went to metric was because all the people making parts(1/2 way around the world) use metric and not Imperial(US makers) and not to make it easier....

@markmatthews1802

8 ай бұрын

Same here for designing parts in CAD. So much easier for calculating.

I’ve been using metric on personal projects for a while now. My only problem with using metric at work is that my metric tape measures seem to keep going missing off job sites, funny thing that.

@barneylaurance1865

8 ай бұрын

In the UK I don't think I've ever seen a tape measure that doesn't have metric on one edge and imperial on the other edge.

@charlottevixen9222

8 ай бұрын

​@@barneylaurance1865same when I lived in Australia

@mckamey

8 ай бұрын

Really strange they seem to walk of since they don’t have feet, unlike imperial tape measures.

@CelticAssassin

8 ай бұрын

That's all tools, sadly. Was doing a QA/QC job on a construction site for a while on Eglin AFB and we usually were there for all of about 4 hours. I left my surveyors tape that measures in tenths unattended for all of maybe 10 minutes and it was gone with the wind. Same happened to my hammer as well. Still miss that hammer.

@CelticAssassin

8 ай бұрын

​@barneylaurance1865 That's pretty much standard. What's harder to find but far better in my opinion is one with tenths instead of inches. Tenths are simply and undeniably superior in every way.

I build scale models, I convert all measurements to metric before I start because it is so much easier.

Greatly done with a straight face! Love to see the outtakes on this one.

I lived in Germany for about 13 years and found it easy to thrive using the metric system. I was thinking in meters, liters, grams, and Celsius in a very short time. It was only an issue if I tried to convert one system into the other. It's kind of like learning a foreign language. Translating one into the other on the fly was always tedious at best, so I learned to think in German, which was a breeze over time.

@SmallSpoonBrigade

8 ай бұрын

Finding it easy is one thing, the problem is that it's never easier than using imperial measures, and frequently less convenient. Add to that the fact that the US has trillions of dollars in SAE infrastructure and you've got a bit of a problem. The US would be the largest developed nation to make the switch, whereas every other nation was either smaller or less thoroughly developed when they made the switch. The US uses the same base units to back the measures that everybody else does, we just subdivide them in ways that are more sensible for non-scientific use.

@Nikolasz1173

8 ай бұрын

this guy tries to tell me that using 5/32 of inch is more usefull than decimal numbers...

@kenc3622

8 ай бұрын

@autisticdoingandthinking The point I was making is that if you stop converting from one to the other, it becomes second nature. US industry is already well on the way to doing everything in the metric system. When the introduced color TV in the USA back in the 1960s, they chose to use an inferior system to save people money. When they went to digital TV, it was expensive and inconvenient. Very few people would go back. If we switch to the metric system, there would be a lot of pushback, but once everyone got used to it without dealing with conversions, few would want to go back.

@benvoncamp

8 ай бұрын

I have a very similar experience with 20 years in Germany. All aspects of metric are superior, but Celsius is simply brilliant. 0 = frozen 10 = mild 20 = room temp 30 = hot 40 = the hottest day on the planet.

@brianmclaughlan2546

8 ай бұрын

I think you hit the nail on the head there. I was in Europe for a while a few years back and (because I'm a math-nerd engineer) was trying to convert everything to Imperial. I could do the conversions, but I wasn't really grasping the measurements. It wasn't until I immersed myself that it just clicked. "This is what 15 degrees feels like." "This is what 20 degrees feels like." "I walked to the market and that was half a kilometer."

Hi Stumpy, coming from Australia I did my schooling and joinery apprenticeship in imperial. Australia went metric, for measurement around 1974 just as I became a tradesman. So I am conversant with both systems. I'm with you, metric is by far a simpler and more accurate way of working. Eventually all us old imperial dudes will be dead along with the system based on 12 with crazy fractions. Long live the metre!

@berenzable

8 ай бұрын

12 inches in a foot, yes, but 3 feet in a mile and 5280 feet in a miles. Let’s ignore hands, yards, furlongs, barleycorns, or twips. Yes, for woodworking, you’re mainly in inches and fractions of, but I’m so glad I run my shop entirely metric rather than an archaic British system based on an ancient Roman system

@garysouder9111

8 ай бұрын

It may be more simple for you but stop saying metric is more accurate - it is not! It is just as accurate as any measurement system you choose to use. Jesse

@peterebel7899

8 ай бұрын

As long as you can select to use short tons vs long tons: Imperial is alive.

@andrewpullen2655

8 ай бұрын

@@garysouder9111 I agree, both are as accurate as each other. Its just that Imperial may be more prone to error from a "user" perspective.

@Rufio1975

8 ай бұрын

​@@andrewpullen2655 You beat me to it. There's more room for error when trying to convert or add and subtract different fractions.

All construction in Canada is Imperial but when I worked in a cabinet shop all measurements that came in were converted to millimeteres before any cabinets were build. I believe the reason was because the metric system does not need a learning curve. Depending on the skill level of the worker there was less chance of error plus there is no conversion needed within the system.

I install commercial flooring for my daily shillings. Sometimes the material is metric and I keep a special tape measure around but, As soon as the layout is done , I swich right back to good old freedom units.

I’ve pretty much gone metric by choice for projects etc. i find the units more accurate and easier to use. Sure it took several tries for it to start to be comfortable, but now it’s second nature

As a Canadian I can tell you that the stubbornness of the imperial system is boundless. Even after everything governmental has switched we still buy 2.5 inch mattress toppers and brag about being 6 ft tall and so on

Well done guys! Right up there with Liberia and Myanmar. And some of you can even correctly name and point out your own capital city on a map! Amazing!

As an ancient Anglo Irish Brit I use both inches and mm. for my woodwork But for most parts I use neither but use either a prepared rod or directly from other parts, it makes for better fits. For the most part people do not care about sizes they just want things to fit. It is rare for an antique to fit either system. But they always look just right.

In Australia we converted to the metric system approx. 50 years ago. Unlike some countries we went the 'whole hog' and use metrics for absolutely every conceivable type of measurement. Back in those days I had been working in the architectural profession for about 10 years and was deeply involved in the imperial system so obviously the change was rather dramatic for me. Yes there was a little bit of a learning curve where you tended to do a conversion from metric to imperial in most measurements but that didn't last long. Once you had adapted to the new system there is no way you would ever consider going back. The metric system is so much better. Obviously the arithmetic is much easier but the way everything relates to everything else is wonderful.

@AndrewAuff

8 ай бұрын

we converted in '47

@markkelc

8 ай бұрын

Yeah,I'm the opposite, , I did Primary School in the 80's in Australia - by then we were only taught metric, and find every time I encounter imperial measurements, I am converting them to metric to understand them...

@bigfutus

8 ай бұрын

Yet you still drive on the wrong side of the road, reeeee :)

@bomafett

8 ай бұрын

Not for "absolutely every conceivable type of measurement." You don't do time in metric. No one does (no countries, at least). There's 60 seconds in a minute, 60 minutes in an hour, 24 hours in a day, 7 days in a week, 28-31 days in a month, and 12 months in a year. We do go metric when talking about times shorter than a second: milliseconds and such. But for units larger than a second, we generally don't do metric (unless you are a scientist, but even then, they usually just measure in seconds and don't talk about kilo seconds or the like).

@ajs4x482

8 ай бұрын

Australia still hasn’t gone the whole hog on metric. Metric bolts in hardware stores are only becoming common in the last few years, many are still whitworth. Tyre pressures are still almost exclusively referred to in PSI. A lot of sheet goods still come in imperial sizes, although are expressed in the metric equivalent just to name a few.

Our cabinet shop changed to metric back 35 years ago! A little adjustment and learning the system it became very easy for us!!! The US needs to convert sooner than later ! All our cabinet end panels were dowel and linebored centered so u no longer needed left or right panels!! A lot less confusion for sure ! No more did we say cut me a part at 24 “oh leave the line !!! Just say cut me a part 610 mm it’s that easy ! 🥱🥱🥱😎✌️🫡🇺🇸🇺🇸🇺🇸

6 Months ago I bought my first metric measuring tape... I find myself reaching for it more frequently. I'm also old enough to remember being in junior high and being forced to learn the metric system for science... Dividing by ten is not very hard! Cheers!

@TheCharleseye

8 ай бұрын

Fractions aren't hard, either. We learned them in elementary school.

@wittttttt

8 ай бұрын

​@@TheCharleseye Both are easy, but it's just simpler to say one number vs a few numbers. That's it. You can say: "three AND one-sixteenth" or just "seventy-eight". When you're on the jobsite it's easier to scream one number, instead screaming multiple numbers. It's also easier to add/subtract whole numbers. Doesn't mean fractions are difficult

@TheCharleseye

8 ай бұрын

@@wittttttt Obviously fractions aren't difficult. American laborers use fractions without any issues over yelling the numbers across job sites. It's the rest of the world that can't handle something so simple, that they need a system to be even easier than the one Americans learned in grade school. That's fine, though. That was previous generations. This generation can't even make change. It's a good time to switch, so that this generation of Americans actually has half a chance of being able to handle the math related to a given field. American exceptionalism is circling the drain.

@joefaraone977

8 ай бұрын

​@@TheCharleseye Just to be clear - I use both. Dividing fractions? invert & multiply. Quite simple. Metric - just divide.

@shanebumpurs

8 ай бұрын

yeah I remember them training us on metric when I was a kid, then it just kind of died.

It may be a consolation for US-Americans that in Europe/Germany, in return, the size of certain products is given exclusively in imperial units of measurement. The diameter of car and bicycle tyres is measured in inches, as are all gas and water pipes in the household sector. The folding ruler is still called "Zollstock" (literally inch-stick) in Germany. P.S.: By the way, the calibre of the Browning M2 machine gun helps me a lot with the conversion from millimetres to inches.

@Foersom_

7 ай бұрын

"bicycle tyres" A standard size bicycle tire is 700 mm.

Imperial is superior for temperature measurements, full stop. As for woodworking, it in a world where we are preparing to fit and attempting to evenly divide lengths, it makes sense to use a measurement system that uses fractions over a base-10 system relying on decimal values.

@Loanshark753

11 күн бұрын

Fun fact 1 BTU is the amount of energy required to heat 1 lbs of water by one farenheit and HVAC systems are measured by their cooling capaciy in terms of tons ice per day. Also one calorie is the amount of energy needed to heat 1 gram or water by one celsius.