Thanks for the video. I refuse to buy another trimmer just for the battery.
@cusoonmyfriend3738
8 ай бұрын
they make you feel guilty for the planet, yet they build stuff and force you to throw it in the trash while you can easy replace or repair some pieces in it.We rly live in a world of sht
@electroumit Жыл бұрын
Thanks. Useful video.
@YEOUBE2 ай бұрын
thanks bro i watched this to fix my braun 5517 shaver with aaa batteries
@gfiksel7 ай бұрын
The most barbaric way to disassemble the shaver, almost at the level of smashing it with a hammer. Please, follow his method on your own risk, what a disaster!
@shaguftakhan3506 Жыл бұрын
Good information 👍
@JabiMM2 Жыл бұрын
Your my hero
@ramilamrahov8808Ай бұрын
i would desolder the batteries with nickel sheets from bottom of the pcb.this is a short and safe way
@cusoonmyfriend37388 ай бұрын
hi there, can i replace AAA 1,2 650 mAh with 2500 mAh ? thanks
@muhamed.awad. Жыл бұрын
Is this Braun 8 in 1 What a vision of It
@ted.8631 Жыл бұрын
I thought those shaver using a lithium ion batteries?
@edivanrs35Ай бұрын
Irmão, manda foto do carregador original, por favor. Pra eu ver as especificações 👍🏻
@shaguftakhan3506 Жыл бұрын
👍👍💖👍
@YassineELAZMI Жыл бұрын
That’s why I’m never buying braun again
@ismaillim92 Жыл бұрын
İyi günler kolay gelsin, bir sorum olacak braun mgk5515 makina var. pilleri NIMH 1.2v 1708 var. Ben duracell aaa hr03 1.2v 950 mah taktım çalışmıyor. Neden olabilir ?
@testcomparisons
Жыл бұрын
should be rechargable
@ismaillim92
Жыл бұрын
@@testcomparisons evet şarjlı ama olmadı .enerji geliyor ışık yanıyor ama çalışmıyor.
@elyazharradjaloa4338
Ай бұрын
I did it and really follow your step. But when I charge it for 2 hours...it keeps red blinking. Any suggestions..?
@ismaillim92
Ай бұрын
@@elyazharradjaloa4338 replace battery. try another one, different mah
@pejcamilos6 ай бұрын
Wath to model 5516??
@kamruljamanrajip2057 Жыл бұрын
I have same trimmer. But battery same problem
@zangezaАй бұрын
Friend, how are you going to kill these batteries? They don't kill themselves, they're just ordinary batteries.
@wolfz1235 Жыл бұрын
I’m sure there’s a way without soldering
@adamxxx8546
Жыл бұрын
Yeah, the best way would be welding, but soldering is good too, as long as you don't overheat battery.
@DamianYesiolow
Жыл бұрын
I just use insulating tape for secure batteries and everything is ok 👌
@davidpatriot1082
Жыл бұрын
I think Ive heard of a conductive glue but I dont remember the details
@harminderkambow9642
Жыл бұрын
That's what I thought. Surely wrapping the batteries with tape around the board will keep them in place and bending the connectors so it fits snuggly against the battery terminals?
@NieznajomyNikomu7 ай бұрын
BUTCHER :D
@pavelhrdy58053 ай бұрын
to je patla...
@yasmeentariq5836 Жыл бұрын
You have destroyed the strips and very crude way to open the cell box. Removing cells should be in this way, you should have stripped out two pins connecting near the charger pins then take out the whole board for cells replacement. Instead this you have agreesivel y using nose plier to remove strips of cells on pcb.
@testcomparisons
Жыл бұрын
i have to resoldering again so no problem how remove i fixed and working untill now perfectly. its take too much time 😜. make videos same time do work perfectly not possible its easy to comment but when you on my seat them you get idea ...but i appreciate your idea
@penelopehayes8695 Жыл бұрын
How are you going to charge a non chargeable battery?
@testcomparisons
Жыл бұрын
See in video. I already done 👍 and using again successfuly
Пікірлер: 36
This video is very helpful, thanks for sharing 👍
Thanks for the video. I refuse to buy another trimmer just for the battery.
@cusoonmyfriend3738
8 ай бұрын
they make you feel guilty for the planet, yet they build stuff and force you to throw it in the trash while you can easy replace or repair some pieces in it.We rly live in a world of sht
Thanks. Useful video.
thanks bro i watched this to fix my braun 5517 shaver with aaa batteries
The most barbaric way to disassemble the shaver, almost at the level of smashing it with a hammer. Please, follow his method on your own risk, what a disaster!
Good information 👍
Your my hero
i would desolder the batteries with nickel sheets from bottom of the pcb.this is a short and safe way
hi there, can i replace AAA 1,2 650 mAh with 2500 mAh ? thanks
Is this Braun 8 in 1 What a vision of It
I thought those shaver using a lithium ion batteries?
Irmão, manda foto do carregador original, por favor. Pra eu ver as especificações 👍🏻
👍👍💖👍
That’s why I’m never buying braun again
İyi günler kolay gelsin, bir sorum olacak braun mgk5515 makina var. pilleri NIMH 1.2v 1708 var. Ben duracell aaa hr03 1.2v 950 mah taktım çalışmıyor. Neden olabilir ?
@testcomparisons
Жыл бұрын
should be rechargable
@ismaillim92
Жыл бұрын
@@testcomparisons evet şarjlı ama olmadı .enerji geliyor ışık yanıyor ama çalışmıyor.
@elyazharradjaloa4338
Ай бұрын
I did it and really follow your step. But when I charge it for 2 hours...it keeps red blinking. Any suggestions..?
@ismaillim92
Ай бұрын
@@elyazharradjaloa4338 replace battery. try another one, different mah
Wath to model 5516??
I have same trimmer. But battery same problem
Friend, how are you going to kill these batteries? They don't kill themselves, they're just ordinary batteries.
I’m sure there’s a way without soldering
@adamxxx8546
Жыл бұрын
Yeah, the best way would be welding, but soldering is good too, as long as you don't overheat battery.
@DamianYesiolow
Жыл бұрын
I just use insulating tape for secure batteries and everything is ok 👌
@davidpatriot1082
Жыл бұрын
I think Ive heard of a conductive glue but I dont remember the details
@harminderkambow9642
Жыл бұрын
That's what I thought. Surely wrapping the batteries with tape around the board will keep them in place and bending the connectors so it fits snuggly against the battery terminals?
BUTCHER :D
to je patla...
You have destroyed the strips and very crude way to open the cell box. Removing cells should be in this way, you should have stripped out two pins connecting near the charger pins then take out the whole board for cells replacement. Instead this you have agreesivel y using nose plier to remove strips of cells on pcb.
@testcomparisons
Жыл бұрын
i have to resoldering again so no problem how remove i fixed and working untill now perfectly. its take too much time 😜. make videos same time do work perfectly not possible its easy to comment but when you on my seat them you get idea ...but i appreciate your idea
How are you going to charge a non chargeable battery?
@testcomparisons
Жыл бұрын
See in video. I already done 👍 and using again successfuly
@mikebell2112
Жыл бұрын
The green pack Energizers are rechargable.