Love the concept. Plz hold the final shot longer. Right now it's too fast to actually SEE the end result - which IS the point, right?

@laternevercame

Жыл бұрын

I don't think it is the point. I think his channel focuses more on the process than the result.

@dryaleah9033

Жыл бұрын

@@laternevercame ANY process has no value without a good result.

@laternevercame

Жыл бұрын

@Dr YaLeah No value. So, if I make a knife, and I over heated the metal I was working with, ruining the knife, there was no value there? I'm pretty sure next time, I won't heat that metal so high and have better luck. So I'm pretty sure that's a lot of value.

@laternevercame

Жыл бұрын

@@dryaleah9033 I'm actually stunned that you would say a process is pointless if the outcome is of poor quality. You just trashed our entire way of learning as a species. I guess trial and error is just a myth.

@Coincidence_Theorist

Жыл бұрын

@@laternevercame no it is the point. Hes obviously educated himself or whoever handles his social media/editing is aware of how to maximize view potentialities/social engineer the audience into viewing more and commenting as we are now about it. Additionally we all watch the video longer than one full cycle as we wanted to see the complete knife. Whether we rewound or watched it all again; one way or another he milked a little more ore out of us.

Судя по цвету ножны латунь и рукоятка, весить пол кило нож будет.

@user-gw2lg4bu4w

Жыл бұрын

Не зарежешь - так прибьёшь!

@user-bp3qh6xl7o

Жыл бұрын

Зато как метнул и все,не важно каким концом😆

@user-ty1ln8vm3q

Жыл бұрын

ага, прям в ножнах!

@Malovitchko

Жыл бұрын

Не твой вот ты и кудахчешь🐔😂

@user-bu9oi7ed6c

Жыл бұрын

Был по такому типу ,как брелок,с одной стороны открывашка,с другой нож,в тарце ручки крепление под кольцо,сделано в 90 -х,на зоне. Ручка 10 см,диаметр ручки 3 ; 3,5 см,из нержавейки. Весч! Ушёл как подарок)) У меня его кто только не выпрашивал))

Как ВКУСНО работают станки. И всё же мне кажется, что результат не стоит затрат.

@user-uh6ty8gk2z

2 ай бұрын

бесспорно !

cool but maybe make the handle more oval shaped for edge alignment when in use this is totally gonna roll around in the hand

@user-ch8xj1jp1x

11 ай бұрын

нож клинок не кованый это полное говно

@harleymarshall6929

10 ай бұрын

​@@user-ch8xj1jp1xknives made from stock removal can be just as good or better than ones that are forged; it just depends on material quality and proper heat treatment along with tempering. However, I agree with the above comment about handle shape; a knife with a perfectly round handle is practically useless.

@Steve-of3er

8 ай бұрын

​@@harleymarshall6929I would also make a point of noting the lack of tang. The fact it all hinges on a single screwpoint connection is probably not practical on the long run. Any significant amount of force could either warp or snap the blad if it gets jarred in the wrong way while in use

@user-si5kv1lc7j

6 ай бұрын

У нас в тюрьмах такое делают

@vittor333

6 ай бұрын

У меня такой был из нержавейки,с одной стороны нож-перо ,а с другой стороны вилка на два зуба

من فضلك بدنا اخر لقطات بطيئة لأن المنتج جميل ورائع

Ничего не понял, но было интересно

@anzurmerganov2572

Жыл бұрын

Идёт процесс изготовки ножа

Видео и результат отличные, только желательно все это снять медленнее, чтобы рассмотреть полученный итог детально.

Am I the only one who finds the sounds to be soothing?

This is pure artistry. Great Work

@user-ro3kh4sz9e

Жыл бұрын

а её зале м п за

@user-nh2mo5dv8p

Жыл бұрын

Питушок, ну ты че?

@markusstewart9298

Жыл бұрын

Certainly not a functional thing. Definitely took some skill to make, but there is a reason they forge knifes and not carve them out of metal.

@gingerninja3761

Жыл бұрын

@@markusstewart9298 depends what steel was used

@ajeje1996

Жыл бұрын

@@markusstewart9298 Most artisanal knives are made this way, forging is more prominent in sword making. The only reason this isn't a 10/10 knife is the tubular handle which I'd expect to be quite slippery and uncomfortable. Other than that if the blade is tempered properly I'm sure it'll work great.

This guy moves SO fast it is Mind-boggling!!😮😅

@jeanevrard2206

6 ай бұрын

Différence visuelle entre les diffèrent model de T-CROSS Businesse préliminaire

@user-yd3ir4wb1m

6 ай бұрын

Этот парень ниндзя! 😂

Thats gonna role in your hand in use, next time to remedy that you should make it oval, this would not only help edge alignment, but it would stop it from rolling in the hand

@RJ-mh3ox

5 ай бұрын

i doubt this will ever be used fam it’s prob just for decoration🤷🏽‍♂️

@Posideonseaboi

3 ай бұрын

And it not full tang

Overall nice build, however make the handle more oval-shaped inline with the blade if you don't when you go to use it if you don't line the cut up perfectly you'll glance and have at worst an accident

@Hoellewood_Solutions

Жыл бұрын

Glad someone else has high standards and common design sense. It’s nice looking, but bad ergonomics.

@slagathorgamayes7823

Жыл бұрын

@@Hoellewood_Solutions yup. I've learned the hard way with handles it takes many designs and 100s of hours to get a handle that feels good and looks sleek.

@danielkeslerjr4407

8 ай бұрын

it also has a thin ass tang. wouldn't hold up go hard work

@asmailmaqosi9247

7 ай бұрын

يجب العمل لمقبض بحيث لا ينزلق بيدك ويجرح يدك

@fnafplayer6447

2 ай бұрын

​@@danielkeslerjr4407it isn't meant for that

Dude this is incredibly cool.

@user-qz5np7zj6k

Жыл бұрын

000

@user-nt6ss3on3b

4 ай бұрын

No. terrible slippery handle, knife to store on the shelf.

¡ qué bonito es ver trabajar a un Gran Profesional verlo trabajar, con soltura, precision, elegancia, eficacia, etc. .....

@zay0_n4ra11

Жыл бұрын

Casate con el y hasle 3 hijos puessss!!!

Yeah nice knife. Just has no toughness; did you heat treat at all? Is it a knife or a prop?

@tannersnowder

7 ай бұрын

Even if heat treated serious use would break the handle

@grahamkingston210

7 ай бұрын

He quenched it in the video if you look closely. From a materials perspective quenching would actually decrease toughness. It increases hardness.

It’s not very strong brass in fact it’s really soft compared to steel so I’m going to chalk this one to art more than function. I love machining brass it’s such a pleasure to work also bronze as well. Bronze is slightly harder and a lot heavier than brass but they both machine buttery smooth. Self lubricating as you machine them.

@pdloder

Жыл бұрын

The blade isn't brass!

@Biketunerfy

Жыл бұрын

@@pdloderof cause it isn’t lol. I was thinking of the threads because brass is soft. I never said the blade was brass lol. Read it again.

@pdloder

Жыл бұрын

@@Biketunerfy the handle and the sheath are both brass which are often made of leather and brass is obviously stronger than leather.

@Biketunerfy

Жыл бұрын

@@pdloder yes but you have to screw the knife into the handle to give it a handle, it’s not very strong. I’ve bought one of these tube spades with knives and things in each tube extension. It was made of steel it lasted less than 10 seconds after the threads just pulled apart. I make knives and I make my own sheaths out of leather but you don’t screw your leather sheath on the bottom or the base of the knife to give it a handle. The brass is fine to house the knife it becomes a problem when you use it for the handle

@pdloder

Жыл бұрын

@@Biketunerfy point taken.

А чего так медленно, могли бы еще быстрее все показать. Особенно результат работы

@jibjibam

6 ай бұрын

Vot imenno, ili voobşe zaçem pokazıvat rezultat

@user-xu4bi4mz2i

5 ай бұрын

Да там и смотреть не на что

нелепый сувенир.

@dennova3882

6 ай бұрын

Зоновский ширпотреб времён СССР.

@user-nz5gi7pl2z

6 ай бұрын

​@@dennova3882бред не неси😂🤦🤦... Если и делали зоновские,то в них было продумано все, относительно лёгкие ,упор, при этом компактные, как правило узкие... А на этом видео болванка на полкило😂😂😂, какое-то американское видео..

Bel tornitore di precisione coltello centesimale fresato tornito e filettato complimenti dimenticavo tagliato e lucidato superiore ❤✔️👍

@ricedavid-armand8953

Жыл бұрын

Mais non Davide Rossi...I'm David Ricci '

Классная штука, можно и как нож и как дубинку использовать👍👍👍

If your having troubles machining aluminum because it gums up your cutter just squirt a bit of wd40 on your workpiece and it will cut like butterr

You need to build it so where it unthreads behind the blade it turns into nunchuk... Therefore, you unscrew one side it's a knife. You unscrew the other side it's nunchuk... or worse. So cool already

Beautiful work. Would love to see a full video of this build.

АСМР настоящего мужчины П.С. Очень хорошая работа

@Malovitchko

Жыл бұрын

Никита везде побрито😂

Красиво работает

Отличная работа

после окончания войны, буду копить на токарный станок. треба здійснювати мрію

Possible to order a model from this wonderful Artist?? Congratulations. ♥️👍🏼♥️

При Союзе такой нож был, наверное, у каждого подростка, чей батя работал на заводе. Правда, размером поменьше - финка сантиметров 8-10.

Great work.👍

Поначалу ждал что из этого получится мощьнейший пугач

I would pay a lot of money for this, beautiful!!!

все те що можна зробити "на коліні", то все зробили станками. браво!

génial, très belle réalisation.

Bro that’s probably the best idea imagine I interchangeable knives I’m whine the space that would save great work

@alphonsemele6493

Жыл бұрын

These have been around forever

@greenfireproductions8629

Жыл бұрын

@@alphonsemele6493 really I need to look this up

Накатки не хватает, чтобы в руках плотнее лежал.

Добрый день, действительно ручка бочкавидная удобнее. Замарочься. 👍

I’d love to have something like this.

Beautiful work.

Красиво но из прокатной стали ножи даже для кухни плохи

Just seeing how perfectly precise all of those pieces fit is amazing to me, totally astonishes me everytime I watch someone make something beautiful like this.

Столько классного материала использовано. Такие чудесные станки, особенно фрезерный. И такую беспантовую вещь сделать.

I love the quick shot of heat treating

Wow! Your craftsmanship is next level. Beautiful knife there.

Wow,great skill.

Very nice. I admire your skills

I like the concept, but as a machinist, I can tell you that a threaded tang offers little to no stability support from the guard/quillion down. The brass handle over it will help, but ultimately less structurally sound than a full tang

Having the skills and tools of a master machinist is an awesome thing.

Советская игрушка начала 1980-х годов. У меня в загашнике где-то до сих пор валяется. Только им ещё можно пиво открывать!

Someone needs to produce / market those.

3Dプリンターでは無く 真鍮を素材にした手作り⁉️ スゴイね‼️

Wow! How are you doing this so fast?? Is it some special kind of coffee you drank today? If so, where can I get some? Need to work faster sometimes, y'know

Smooth cylindrical handle on a blade ... totally safe and usable

@jpoorr9973

Жыл бұрын

It's a cranium cracker that just happens to be a knife also😂

Very nice craftsmanship. However, I'd like to see the final result for a bit longer. :)

20 лет назад делал из нержавейки нож похожий, но попроще. До сих пор живой

Nice work!👍🏼

Without this sophisticated tolls You will be lost...

Now I got ideas.

Never put a round handle on a knife or really any tool 😂😂😂

Зимой пользоваться этим ножом будет одно удовольствие

Особенно зимой им работать,голыми руками😂

work is excellent but caption is like 😏😏 like he saw a 2 hour movie in 1 hour fast forward action mention speed mode 😏😏

Красиво ! 👍 ! 👌 ☝️ Beautiful 🖐️ 🤩🫶 Super Knife !!! ;-)) 👏✊

Мечта юного токаря- пту(шника))))

-- PESAN.. BUAT DRAT ATAU ULLIR TABUNG SENAPAN dilarang longgar, oblak dikit jgn. Mudah lanas, tembez, Jebol, Meledak. -- hrs adu seret2 dikit tpi dpasang lancar, jdi kuat HIGHT PRESSURE

Хочу такую же катану, чтобы возить в машине и срубать шлакбаумы 😊

My brain: new recipe unlocked

Переживал что не успеет собрать до конца ролика 😂

I like that it can also be used as a club XD

This would make a good balistic knife.

Handle is so slippery. What would u do to it?

Вот как раз по этому типу у меня трость! Хорошее, а главное, практичное дело!!!)

Holy shit dude. Very nice. I did Not expect a Nice knife out of this video. As soon as I saw the blade blank, I hit the like button. How long did that Actually take to make?

@travisberg9031

3 ай бұрын

You should knurl the handle. Or the whole thing. Slippery when wet... 😂

Very good work !!!

in my head i was thinking that the knife blade would be stored in the handle then screwed in the other way to use the knife - this is more like an old school divers knife

Super jest to zrobione ten cały móż pozdrawiam serdecznie 👍👍👍👍

Интересно, когда таких Горе-самодельщиков будут привлекать к ответственности?

Бестолковый сувенирный режик...

Красота, респект)

VIDIO NYA BAGUS.... TAPI KURANG CEPAT LAGI....

Снимаю шляпу, Маэстро!!! Выше похвал Ты знаеш !! Зачем тебе руки))) БРАВО

Love it

Да токарный станок вещь лайк за труды

Единственный минус вес , а так хороший клинок 🤝

This Dude is Awesome

Прикольно.Только станка такого нет.Был бы такой станок.

Nice work/blade... Could do with better/longer shot of the finished product🙂

Beautiful ❤

Great Design.

Hello my Lovely Very Good Very Nice your Working and your Channel Thanks so much Goodbye next time ❤🌹❤

Woow … skills Forsure that thing is badass

Blade geometry is great.

Excellent!

@user-ch8xj1jp1x

11 ай бұрын

нож не кованый , полное говно

Нож красивый,но чисто для понта,сувенир

God, this guy is fast!

Incredible!!

Pretty nifty .

Латунных дел мастер)

Awesome work ☝️👏👏👏✌️

В России такое осужденные делали в тюрьмах, ещё в СССР.