Chris, thanks for dynoing my SRAD and featuring it in this video. It was almost to the week in February 1996 I rolled out of this dealership on this bike! It has seen roadracing school as well as track days and never missed a beat. This bike has not been abused but has been pushed to it's limits and at 26,000 miles the valve clearances are still in spec. That's Suzuki quality! I was happy with the HP results but pleasantly surprised that the power curve, until 8500, is pretty much identical to a 2023 GSXR. Then I go a little rich which I could tune out but I will probably leave it alone for now. I've enjoyed ownnig, tuning and caring for this bike and it was great to see what this piece of GSXR history would do against the amazing modern GSXR!

@markrosenquist8259

Жыл бұрын

She’s a jewel.

That exhaust tube thats blanked off is actually for sound not scavenging. Its used mainly in aftermarket car exhaust to get rid of drone at cruising RPMs and stabilize the exhaust note frequency.

@TeamMooreMafia

Жыл бұрын

👍👍

@ianm432

Жыл бұрын

Called a helmholtz resonator

@yoursofullofitha7262

4 ай бұрын

I think the exhaust valve scare of delete.. was a scam from tuning companies..years ago.. and a racket for the dealer..just 1 more actuator to go bad at a SPENDY price to replace 😮

The old school GSXR is clean asf. Great job hosting that bike. The 1000 is absolutely stunning.

@jgraham8248

Жыл бұрын

Thanks...that's my SRAD and Chris did a great job showing how the older stuff stacks up against modern bikes.

That has to be the cleanest gsxr I have ever seen

The bike is beautiful! I have always like the 2018 paint scheme and this is very close. So clean!

@TeamMooreMafia

Жыл бұрын

I agree!

@flamintasty

Жыл бұрын

My 2018 is black with grey and white detail. Looks the best I reckon.

@Aexomer

Жыл бұрын

I agree. White wheels always look great. Even if they are a complete pain in the arse to keep actually looking white. A real pity the GSX-R is no longer available here in the UK. Absolutely, the end of an era, dude.

I tuned each cylinder on my gixxer and gained 5whp more versus batch tune. Gained extra 4 or 5hp messing with injector balance as well, it's the small details in tuning that can make a good difference!!

@elonmust7470

8 ай бұрын

Proof

@duncanguimond3766

8 ай бұрын

@elonmust7470 what you mean? All I got is a final dyno graph and a vid of my bike on dyno

@yoursofullofitha7262

4 ай бұрын

Truth.. you could have variances from cylinder to cylinder

@yoursofullofitha7262

4 ай бұрын

My 2022 only has a Yosh slip-on.. flashed ECU to delete emissions,speed governors, exhaust valve ..no tuning of lowers from flash.. tuned lowers with Power Commander 6. Gained double.digit HP..from.the tune. DITCH GOVERNORS fellas. Still a work in progress

White on White looks just right!

Awesome seeing older bikes and the power they can still make. New is great and all but something about retro bikes is so refreshing to watch!!

@jgraham8248

Жыл бұрын

Thanks! That's my SRAD ...we thought it would make for an interesting comparison. These older bikes are no slouch.....2nd gear power wheelies are all the entertainment I need when riding it.

WOW! ABSOLUTELY AMAZING... I've never owned a bike myself, yet in high school friend's of mine gave me the privilege to ride theirs. Keep in mind I'm almost 40 years old I I have kids now and a mortgage... YET I DREAM THROUGH YOUR VIDEOS OF OWNING A WHITE ON WHITE GXSR.THANK YOU! FOR ALLOWING ME TO LIVE MY HIGH SCHOOL MOMENTS FOREVER!

@TeamMooreMafia

Жыл бұрын

Glad you enjoyed it!

That was my 2023 750 dyno with an Brock's exhaust on it he compared the 96 to. These 750's just work and keep on rolling! Great video guys!

@TeamMooreMafia

Жыл бұрын

💪

@jgraham8248

Жыл бұрын

That's my SRAD Chris dynoed. It was good to see the comparison with your new GSXR. What power did yours make before Chris tuned it?

Did not expect to see an SRAD on Moore Mafia! 💪

@daveyt4802

Жыл бұрын

Next, TL1000R's!

@jgraham8248

Жыл бұрын

Chris did a great job featuring my SRAD...we thought it would make for some interesting viewing to see how older stuff would stack up.

The capped end pipe is called a Helmholtz chamber. It's purpose is to knock down drone by limiting certain frequencies at certain rpm ranges. In short, it's there to help produce a desired sound.

@crisnmaryfam7344

Жыл бұрын

"Helmholtz resonance or "wind throb" is the phenomenon of air resonance in a cavity, such as when one blows across the top of an empty bottle. The name comes from a device created in the 1850s by Hermann von Helmholtz, the Helmholtz resonator, which he used to identify the various frequencies or musical pitches present in music and other complex sounds."

@overtherailing

Жыл бұрын

@@crisnmaryfam7344 Yea, I didn't want to get that technical with it. Japanese companies have been using them on exhausts for cars for years. It's nothing new.

That exhaust sounds badass. That dinosaur of a gem was clean as well.

I love white bikes! Doesn't seem to matter what bike that color is on it always pops and when you add a contrast color especially red/blue/black it makes everything pop.

Back to back gixxer looking so clean.

Cool old 750

wheels look sick

I think that exhaust will really show with velocity stacks because individual cylinder tunes would be affected more. It would be and interesting test.

Best gsxr color scheme yet 👍

That exhaust tube thats blanked off is actually for sound ,here in Europe we using it for restricked the Bike for sound and the Power ,so get rid of it

Glad y’all got that ol carb gsxr on the dyno. I do like carbs. The response is nice

@jgraham8248

Жыл бұрын

Yeah to the carbs. I was pleasantly surprised the AFR was a good as it was.....not perfect but pretty good for a carbed bike. I sync'ed them last year for the first time ever and that made a difference down low.....otherwise I used Factory Pro Config. 10 carb kit right out of the box. I like Chris' disclaimer....."Do Not call wanting me to work on your carbureted bike....I DO NOT work on carbureted bikes!".

The wheels are the icing on the cake

Love that paint scheme

Wow, that old 750 looks amazing! 😫

That 23 sounds good. Love the white wheels on there, mean!

Love love LOVE the white wheels!!!!!

the black pipe is a drone resonator. kills drone at a specific range. awesome exhaust 👍🏼

Yeah I love the paint scheme nice 👍👍

The white on white looks clean af 🔥

I love the white wheels looks amazing

im over here waiting to get mine i am excited as hell hahahopefully a couple more months

My Arata on my old zx12r was a beautiful pipe back then. Yours looks like they are still beautiful pipes.

Love the channel!!! But those BLUE WHEELS,, are what made that paint scheme bad ass !!! I’m bias towards blue though, lol

Omg this bike is beautiful

Love the SRAD and the white wheels

Arata making an awesome comeback 💪🏼

Love tht 96 gixxer tht thing is MINT! I own a 2008 gsxr and love the colorscheme is pretty much been the same

White on white should be factory. Damn she looks clean my friend!

How do we get a ecu flash not living close to you can this be done any other way. Picking up my GsxR 1000 2023 tomorrow

9:40 they're called J pipes which is mostly seen by the car world. It helps keep resonance down so the exhaust doesn't drone. I test drove a 2020 camaro ss with an MBRP exhaust that had the J pipe on it and it was crazy loud but all tone (wouldn't hurt your ears). I ended up buying a 2018 SS 1LE with a dual mode exhaust though

Now I just need new clutch and Sprint P08 air filter and the Moore mafia ECU flash then the bike will be perfect 👌👌👍😁

White on white I think you made the right move by getting the blue powder coat white👌

@TeamMooreMafia

Жыл бұрын

I think the white wheels set it off!

@markhughes5113

Жыл бұрын

@@TeamMooreMafia yes!!

That accumulator near the muffler is for LESS POPPING, they do that in plumbing a house when you shut off the water fast it muffles the BANG in the pipes not to hear though the wall☝️

What a monster of a liter bike, man. 183 and 80-something foot pounds, with that sprocket setup, the thing is a rocket ship.

Damn Chris that gixxer looks good

Man that SRAD, what a machine.

That was my fist bike but a 97 750 awesome to see it will still keep up with the new bikes 27 years later

The Arata are top notch!

Resonating chamber, automotive manufacturers been using them for decades on intakes, makes sense it could work in exhaust if sized correctly.

Was that the one in the shop this week??! Man i was checking that bad momma out!👍 The blue wheels were ok but i LOVE the white. That is the bike I want!!🤪 Hopefully in a year or two ill sale the 650 for a GSXR.

Them wheels really look badass 👌👌👌

That exhaust sounds pretty mean man spitting out them flames

Bought a 2023 gsxr 1000 today. As soon as it gets its first oil change it will be in the way to your dyno for a tune!

Also helps with the sound! That gsxr looks so skeletonized and beautiful!!!

Fantastic love this Machine #mooremafia

That extra no-where pipe helps during the overlap to get that intake charge moving. Surprised they do not make it adjustable.

I’ve got some carbon fiber inlet tubes and rear mudguard if you’d be interested oh You’re gonna pick up 10 extra hp on top of your best number with the cylinder by cylinder tuning.

A jet kit.....how many kids know about them? ;) Love it man! 1996 Vintage looking awesome! Keep up the good work Mr. Moore!

Cool! First to like, first to post! Waiting for y'alls live video for March 2nd. Let's go!!!

@TeamMooreMafia

Жыл бұрын

💪👍

I had a 99 wx 750 srad in black/silver/grey. Put K&N filter, oval titanium Micron can, gold plated double tipped plugs and got it tuned by Jarrod Jack Frost when he lived in Rodney, Leeds. On UK 95 Ron fuel I got 124.1bhp. They were some bike. Loved hearing this one on the dyno.

@raynic1173

Жыл бұрын

I had a blue and white '99....great bike.

@alanjackson2540

Жыл бұрын

@@raynic1173 I wanted blue & white but the new one had come out (I couldn't afford it) so stock was running low on the srad. My Dad went all over looking for one, rang me at work said can't find one but found the black/white/grey. Just as pleased when I first saw it in the bike shop with 'sold do not touch' on it. Yes great bike when it hit 10k rpm and fields flashed by.

@raynic1173

Жыл бұрын

@@alanjackson2540 I started doing track days on mine. I topped it out on the front straight at Roebling Road, GA. What a blast...

i love from France !! i have white hayabusa gen3 .

Man that Exhaust Sounds Pretty Good

had a '98 600 myself. Seeing this made me miss it now. Great bike. Too bad spare parts are scarce on the market.

I like that color scheme. Like my 2011

Light blue. With white. Maybe like electric purple

Put a vortex 17 tooth in the front and a vortex 42 tooth sprocket on the rear of my 2003 busa man it helps the top end Big time I'm only a 130 lbs so I can really tell a difference

That’s white on white is sooooooo CRISPY man!!!🔥👌🏽😩

Weird I have exactly both them gsxrs bought the 23 last Friday been riding the 96 for 10years

Aye let's Goooooooooooo 🔥🔥🔥.... I need a shot at you & kountry lol 😆.... im running that same exhaust system on my 22'GSX-R1000R

That sounds so good!!

This is my next bike, in this color. Can't fucking wait.

The white wheels are perfect!!

Absolutely KLEEN my precious 👀👉💃😶‍🌫️👹

The Man ..he has made my gsxr1k Real fast he Definitely knows his Bikes..Thanks Chris..

@TeamMooreMafia

Жыл бұрын

Right on!

Love the color 😍🤤 great video as always quick question What would u prefer 2023 Gsxr 600 Or 2023 kawasaki zx6r 636

Chris, you're the best motorcycle channel on KZread.

We're waiting on a 2024 Buddy

Been waiting for this video! Seen them white wheels weeks ago, looks awesome!! Might do mine the same!! Definitely following this bike, I have exact same

@TeamMooreMafia

Жыл бұрын

You should!

you are the suzuking,, 😀😀👍🏻👍🏻👍🏻

Badass

Spinning on the dyno!!😂💥💨

The extra pipe is called a helmholtz resonator for sound tuning.

that gsx750 is a museum quality bike! mint 💯👌🏽!

My 2018 GSXR 1000R has an Akrapovic Evolution Line Titanium fitted. The guy who mapped it drilled into the headers and the 02 sensors were inserted so each cylinder can be mapped. It made my eyes water watching him drill into my exhaust. That Arata system with the bungs is awesome, no drilling required. Mine wasn’t Woolich tuned, the mapper manipulated the Suzuki files without using Woolich.

I predict 105 106 horsepower with the jet kit we had that exact same bike on my friends Dyno back-in-the-day same exact Dyno is yours as a matter of fact great memories

I gained 5rwhp everywhere with the new velocity stacks... should try

Srad ❤️ greetz from Holland folks!

That Arata system is worth more than my whole motorcycle!

damn love the white wheels clean AF love the old school srad that was my second bike I have been thinking of getting another 750 I have no need for a liter bike at my age and have a r6 currently mainly for some fun and gas economy

WOW... Very nice!!

Can’t wait to see what it does on the track!🔥🤘🏾

per cilinder mapping hehehe yes bring it :D new tech evel unlocked :D

Had to sell my cbr to help pay for my wedding. Can't wait until the 31st to try to win your bike! I miss riding

That little pipe is a resinator

@1:00 the front brake bandits have struck again!!! Beware that they don't come back to steal the other front disc!

I need that scoot

lookin good little brother is gonna be feeling the heat soon GSXR 1000R VS GSXR 1000 should be a good time in down the road mexico

@TeamMooreMafia

Жыл бұрын

For sure!

Is that the Hot Bodies undertail on there? Looks great but huge PITA to install (for me, anyway).

Damn that white on white got me hype 😬that's zuki is raw with the white nostalgic for sures also that ninja is nasty too

It’s a 9:47 drone tube